Nanoparticles Anchored on Nitrogen-Doped Graphene Nanosheets

38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60 ..... of 0.1, 0.3, 0.5, 1.0, 3.0, 5.0 and 10.0 A g–1, res...
0 downloads 0 Views 4MB Size
Subscriber access provided by Kaohsiung Medical University

Energy, Environmental, and Catalysis Applications 7

8

FeS Nanoparticles Anchored on Nitrogen-Doped Graphene Nanosheets as Anode Materials for High Performance Sodium Ion Batteries Qiming He, Kun Rui, Jianhua Yang, and Zhaoyin Wen ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b08237 • Publication Date (Web): 09 Aug 2018 Downloaded from http://pubs.acs.org on August 10, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Fe7S8 Nanoparticles Anchored on Nitrogen-Doped Graphene Nanosheets as Anode Materials for High Performance Sodium Ion Batteries Qiming Hea, b, Kun Ruia, Jianhua Yanga, b and Zhaoyin Wena, b* a CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, P. R. China. b University of Chinese Academy of Sciences, Beijing 100049, P. R. China *Corresponding author Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 DingXi Road, Shanghai 200050, P. R. China Tel: +86-21-52411704 Fax: +86-21-52413903 E-mail: [email protected] Abstract Despite high sodium storage capacity and better reversibility, metal sulfides suffer from relatively low conductivity and severe volume change as anode materials of sodium ion batteries (SIBs). Introducing conductive carbon matrix is an efficient method to enhance their sodium storage performance. Herein, we present iron sulfide (Fe7S8) nanoparticles anchored on nitrogen-doped graphene nanosheets (denoted as FS-NGNs) fabricated through a combined strategy of solvothermal and post-heating process. The as-prepared composite exhibits appealing cycling stability (a high discharge capacity of 393.1 mA h g−1 over 500 cycles at a current density of 400 mA g−1 and outstanding high-rate performance of 543 mA h g−1 even at 10 A g−1. Considering the excellent sodium storage performance, this composite is quite hopeful to become a potential candidate as anode materials for future SIBs. Keywords sodium-ion batteries; nitrogen-doped graphene; anode materials; iron sulfides; conversion reaction 1 Introduction Benefitting from elemental abundance and cost-efficiency, sodium ion batteries (SIBs) have been recognized as one of the most attractive alternatives to lithium ion batteries (LIBs). However. it is a critical challenge to achieve high performance SIBs is designing viable anode materials which can deliver stable cyclability and high capacity. In recent years, transition metal sulfides (TMSs), such as MoS2,1-3 SnS,4 SnS2,5-6 Sb2S3,7 CoS8 and CoS2,9 have intrigued many researchers’ interests, due to their large sodium storage capacities and robust structure as anode materials for SIBs. Moreover, studies have shown that the M-S ionic bonds are comparably weaker than M-O bonds,10 which is favorable for the electrochemical reversibility of TMSs compared with transition metal oxides (TMOs). In addition, with advantages of environmental friendliness, cost-effectiveness and earth abundance, iron sulfides, involving FeS11 and FeS2,12-13 hold eminent position among anode materials of SIBs. Fe7S8, known as pyrrhotite, possesses both mixed-valence state and intrinsic metallic character,14 which are beneficial for anode materials.15-16 Unfortunately, their potential applications are hindered by the huge volume variation, low conductivity and sluggish kinetics during cycling.

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Based on the above concern, considerable efforts have been dedicated to improving the electrochemical performances of iron sulfides through lowering the particle size to nanoscale and introducing conductive carbon.17 Nanoparticles have much higher specific area than that of bulk materials, which may contribute a lot more active sites for electrochemical reactions and more contact between the electrode and electrolyte, benefiting the fast sodium ion storage.18 Furthermore, anchoring the iron sulfide nanoparticles onto carbonaceous materials can efficiently buffer the volume expansion and enhance electronic conductivity. Two dimensional (2D) graphene nanosheet has been universally exploited as such matrix because of its excellent electronic conductivity, considerable surface area, and superb mechanical elasticity.19 Moreover, it is notable that heteroatom doping in graphene, such as nitrogen, has been reported to remarkably enhance the electronic conductivity and the surface hydrophilicity of graphene, benefiting the electron/ion transportation and electrode-electrolyte contact.20 Considering the above advantages, the nanocomposite of iron sulfide nanoparticles and nitrogen-doped graphene nanosheets hold good potential to become suitable anode material of high performance SIBs. Herein, we have successfully anchored the Fe7S8 nanoparticles onto nitrogen doped graphene nanosheets through a one-pot solvothermal procedure combined with post-heating treatment. The as-prepared composite (denoted as FS-NGNs) showed superior cycle performance. After 500 cycles at 400 mA g-1, the FS-NGNs retained a high capacity of 393.1 mA h g-1, achieving a Coulombic efficiency of 99%. Even at high current density of 10 A g-1, the composite can still deliver high capacity of 543 mA h g-1. The high sodium storage capacity and excellent rate performance can meet the request for future application of SIBs. 2 Experimental Section 2.1 Material synthesis The graphene oxide (GO) was synthesized according to a modified Hummers’ method.21-22 To prepare the FS-NGNs, firstly, certain amount of GO was dispersed into 46 mL deionized water by ultrasonication and vigorous stirring for 1 h, respectively. Then 3 mmol FeSO4·7H2O and 6 mmol thioacetamide (TAA) were dissolved into the above mixture. Finally, 23 mL diethylenetriamine (DETA) was added dropwise. The mixture was then transferred to the Teflon-lined autoclave and heated at 140 °C for 24 h. The product was subsequently filtered and rinsed by deionized water and pure ethanol for three times and dried in vacuum at 60 °C overnight. The FS-NGNs were obtained after a post-heating treatment under N2 flow at 700 °C for 3 h. The samples of FS-NGNs with different weight ratios of graphene were fabricated for comparison and denoted as FS-NGNs-60, FS-NGNs-80 and FS-NGNs-100 according to the initial GO masses in the mixture during synthesis procedure. For example, FS-NGNs-80 is in accordance with 80 mg GO in the starting mixture. The bulk Fe7S8 particles were also synthesized without adding GO in the precursor mixture. Other conditions were controlled as same as those of the FS-NGNs. The reduced graphene oxide (RGO) was synthesized by the hydrothermal process without adding Fe resource, TAA and DETA. 2.2 Material characterization

ACS Paragon Plus Environment

Page 2 of 17

Page 3 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

The crystalline phases of the as-prepared materials were analyzed by an X-ray diffractometer (XRD, Rigaku, Ultima IV) with a Cu-Kα radiation. Raman spectroscopy was performed using a HORIBA LabRAM HR Evolution equipped with an Ar-ion laser at an excitation wavelength of 532 nm. X-ray photoelectron spectroscopy (XPS) was conducted using an ESCALAB 250Xi equipped with an Al Kα X-ray source. Thermogravimetric analysis (TGA) data was collected by a thermal analysis equipment (NETZSCH STA 449C) with a heating rate of 5 °C min-1 from room 50 °C to 900 °C in air. The morphology and composition of the as-prepared samples were analyzed by field emission scanning electron microscopy (FESEM, Magellan 400) equipped with energy dispersive spectrometer (EDS) and high-resolution transmission electron microscopy (HRTEM, JEM-2100F). 2.3 Electrochemical measurements All the electrochemical tests were conducted using half cells (CR2025-type). The electrodes were fabricated through uniformly coating the aqueous slurry consisting of active material, Super P (conductive carbon), polymerized styrene butadiene rubber (SBR), as well as the binder carboxymethyl cellulose (CMC) with a mass ratio of 14:4:1:1 onto copper foil. After dried at 60 °C for 12 h under vacuum condition, the CR2025-type half cells were assembled in a Mikrouna glovebox in argon atmosphere, where both H2O and O2 contents were below 0.1 ppm. The electrolyte consists of NaClO4 (1 M) in propylene carbonate (PC) with 5 wt% fluoroethylene carbonate (FEC) as additive. The glass fiber (φ 18 mm) and metallic sodium (Sigma-Aldrich) were used as separator and reference electrode, respectively. Cyclic voltammetry (CV) profiles were collected by a Chenhua CHI600E electrochemical analyzer. The galvanostatic charge/discharge measurements were conducted by utilizing a Land charge/discharge instrument (Wuhan, China). The electrochemical impedance spectroscopy (EIS) analysis was carried out through a Metrohm Autolab instrument between 0.01 Hz and 1000 kHz. 3 Results and Discussion 3.1 Phase and morphology characterization

Scheme 1 Typical synthesis procedure of FS-NGNs. The red, yellow, gray and blue spheres represent Fe ions, S, C, and N atoms, respectively. The brown network represents GO nanosheet. The FS-NGNs were synthesized through a simple one-pot solvothermal reaction combimed with a post-heating process, as shown in Scheme 1. Firstly, GO was

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

uniformly distributed in the deionized water. After adding Fe resource, the negative charges from the functional group on the surface of GO can absorb Fe ions. Then TAA was introduced as sulfur resource. Finally, DETA was added and also absorbed by GO due to the positive charges of amino. During the solvothermal reaction, TAA decomposed and reacted with Fe ions. DETA was exploited as chelating agent to coordinate with Fe ions to avoid oversize growth. Meanwhile, its amino can reduce GO and dope N atoms into graphene matrix. After solvothermal process, the precursor was further annealed for Fe7S8 crystallization and obtaining the final FS-NGNs.

Fig. 1 (a) XRD pattern of the as-synthesized FS-NGNs. (b) Raman spectra of the FS-NGNs and GO. High resolution XPS spectra of the FS-NGNs: (c) Fe 2p, (d) S 2p, (e) N 1s and (f) C 1s. X-ray diffraction (XRD) analysis was conducted to characterize the phase and structure of the FS-NGNs. As can be seen in Fig. 1a, the main peaks in the XRD pattern is well indexed to Fe7S8 (PDF#25-0411). Meanwhile, there are some

ACS Paragon Plus Environment

Page 4 of 17

Page 5 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

unindexed minor peaks, which may be attributed to some impurities, such as oxidized surface species or other form of iron sulfides. There are no visible diffraction peaks of graphene at 2θ = 20-30°, indicating that Fe7S8 nanoparticles are effectively coating the graphene surface to restrain the restacking of graphene nanosheets during the synthesis procedure. Furthermore, the phase of the as-prepared Fe7S8 particles without graphene was also characterized by XRD, which indicates the almost pure phase of Fe7S8 (Fig. S1). Raman spectroscopy characterization was also carried out to further identify the composition of FS-NGNs composite. As can be seen in Fig. 1b, The Raman shifts positioned at 1353 and 1593 cm-1 are attributed to the D-band and G-band of graphene, respectively. Compared to GO, the ratio of ID/IG in NGNs is slightly lower for FS-NGNs (1.11 for GO vs. 1.03 for FS-NGNs), suggesting a higher graphitization extent of graphene originating from the sp2 restoration during heating process, which is crucial to the enhancement of electronic conductivity. The chemical states of the elements in the FS-NGNs were investigated by high resolution X-ray photoelectron spectroscopy (XPS). As can be seen in the Fe 2p spectrum (Fig. 1c), the peaks at 710.4 and 715 eV (2p3/2 with shake-up satellite) indicates the existence of Fe2+,23-24 while the peaks at 723.6 and 731.1 eV (2p1/2 with shake-up satellite) can be attributed to the Fe3+.25-26 In the S 2p spectrum (Fig. 1d), the peaks at 161.65, 162.75 and 163.8 eV can be indexed to metal-sulfur bonding.27-30 Some SOx species are also detected (168.6 eV), probably due to adsorbed oxygen on the active surface of FS-NGNs.31 The N 1s spectrum reveals pyridinic (398.9 eV) and pyrrolic (400.7 eV) nitrogen in the FS-NGNs (Fig. 1e), confirming the successful doping of N.32-33 The C 1s spectrum further substantiate the nitrogen doping. The peak at 284.9 eV is assigned to C-C bonding,34 while the peak at 285.6 eV is attributed to C-N bonding (Fig. 1f).35

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Fig. 2 (a) SEM, (b) TEM, (c) HRTEM and (d) SAED image of the as-prepared FS-NGNs. It has been comprehensively studied previously that the morphology of graphene-based materials applied in SIBs also has an important influence on the sodium storage performance. Thus, the morphology and specific microstructural characters of the FS-NGN hybrid anode were further revealed by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). Fig. 2a exhibits a typical SEM image of as-prepared FS-NGN composites, where 2D and broad-piece sheet-like morphology can be observed with rough surface and uniform distribution of nanoparticles, indicating the in-situ formation of Fe7S8 on graphene nanosheets. which is further confirmed by backscattered electronic (BSE) image (Fig. S2). These nanoparticles are around 100-200 nm, which are greatly smaller than bulk Fe7S8 particles (Fig. S3). The distribution of the sulfide nanoparticles is further revealed by EDS elemental mapping (Fig. S4). As can be seen, the high signal intensity positions of Fe and S elements exhibit good conformity and are in good accordance with the positions of the nanoparticles in the SEM image, while the spectrum of C illustrate the profile of the graphene matrix. Furthermore, it is critical to mention that a large amount of Fe7S8 nanoparticles are confined within the graphene layers, displaying the efficiency of self-assembly between the functionalized GO and Fe7S8 nanoparticles. Fig. 2b shows a characteristic TEM image of a small piece of as-prepared FS-NGN composites, further confirming sheet-like graphene

ACS Paragon Plus Environment

Page 6 of 17

Page 7 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

without severe restacking and Fe7S8 uniform distribution without agglomeration. Moreover, the high crystallization character of Fe7S8 in the FS-NGN composites is also confirmed by HRTEM image shown in Fig. 2c, where series of parallel fringes with d-spacing of 0.298 and 0.265 nm are observed, indicating the (200) and (203) plane of Fe7S8 (hexagonal, P31), respectively. The pattern of selected area electronic diffraction (SAED, Fig. 2d) displays (200) and (203) plane of Fe7S8 nanocrystalline, maintaining good accordance with the XRD pattern and the HRTEM image. 3.2 Sodium Storage Performance

Fig. 3 (a) CV curves of the FS-NGNs for the beginning five scans at 0.1 mV s-1. (b) Charge-discharge curves of FS-NGNs for the beginning five cycles at 400 mA g-1. (c) Cycle performance of FS-NGNs, RGO and bulk Fe7S8 particle at 400 mA g-1. (d) Rate performance of the FS-NGNs at various current densities from 0.1 A g-1 to 10 A g-1. (e) Electrochemical impedance spectra of FS-NGNs and the bulk Fe7S8 before and after cycles. The electrochemical reaction of the as-synthesized FS-NGNs was evaluated by cyclic

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

voltammogram (CV). Fig. 3a exhibits the CV profiles of FS-NGNs obtained during the beginning five scans. The first cathodic scan of the FS-NGNs shows a sharp large peak at 0.82 V, indicating the conversion of Fe7S8 into Fe and Na2S,11 and a solid electrolyte interphase (SEI) formed due to the decomposition of electrolyte.36 The cathodic peak at 0.9 V during the following four cycles is also due to the conversion of Fe7S8 into Fe and Na2S. The shifting of 0.08 V is due to the SEI formation and some irreversible metallic Fe and Na2S during the initial cycle.37-38 The anodic peaks observed at 1.41 V (sharp) and 1.75 V (broad) are ascribed to formation of Fe7S8, which has been reported for various iron sulfides.11, 39-40 Moreover, the minor peak at 0.09 V is assigned to Na+ deintercalation from nanopores of FS-NGNs.41 The initial five charge/discharge curves of FS-NGNs at 400 mA g–1 (Fig. 3b) are maintaining good accordance with the CV curves. A noticeable plateau at about 0.8 V in the first discharge profile is attributed to the formation of Fe and Na2S. The profiles of latter four cycles maintain good conformity. Compared to the FS-NGNs, the charge/discharge profiles of the Fe7S8 particles (Fig. S5) exhibit obvious polarization and capacity decay during the initial five cycles. The cycle performances of FS-NGNs, pure graphene and Fe7S8 particles are displayed in Fig. 3c. Though obtaining high initial capacity, the Fe7S8 particles exhibit fast degradation. On the other hand, it can be seen that although the cycle performance of RGO is very steady, its capacity is rather low, suggesting that combining the sulfide nanoparticles is necessary. As for the FS-NGNs, compared with the FS-NGNs-80 sample, the FS-NGNs-60 and FS-NGNs-100 exhibit inferior cycle performances. The insufficient graphene in FS-NGNs-60 may lead to overloaded particles on graphene nanosheets or even detachment between them, which will cause uneven distribution of the particles and hider the cycle performance. On the other hand, too much graphene may bring about reduced mass load, which will lower the capacity.42 Moreover, the Na+ diffusion channel may also be blocked by overwhelmed graphene.43-44 Thus, it can be inferred that 80 mg is in the optimized range of the amount of GO in the as-mentioned precursor. The weight ratio of the N-doped graphene in FS-NGNs-80 was evaluated through thermogravimetric analysis (TGA). As shown in Fig. S6, since Fe7S8 is fully transformed to Fe2O3 after 800 °C in air, the weight ratio of graphene in FS-NGNs-80 is estimated to be 25.26 wt%.13, 45-46 The initial discharge and charge capacities of FS-NGNs-80 are 758.7 and 647.9 mA h g–1, respectively. Thus, the initial Coulombic efficiency is as high as 85.39%, which can be ascribed to facile and effective ion/electron transport in this electrode.47-48 The FS-NGNs-80 preserved reversible capacity of ~630.3 mA h g–1 at 400 mA g-1 during the initial 15 cycles. Then, the discharge capacity gradually increases to 827.7 mA h g-1 for the remaining 125 cycles. The FS-NGNs-80 exhibits satisfying Coulombic efficiencies of more than 97% since the 4th cycle forward. After 500 cycles, the discharge capacity of FS-NGNs-80 is 393.1 mA h g–1. The primary reason for the increased capacity is the formation of polymeric gel-like film on the active material generated from electrolyte decomposition, which has been noticed in some previous studies.49-51 In spite of the relatively low original surface area, after the initial sodium insertion, the Fe7S8 is transformed into metal nanoparticles in the Na2S matrix. Accordingly, the surface

ACS Paragon Plus Environment

Page 8 of 17

Page 9 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

area is significantly enlarged. Furthermore, based on conversion reaction for Fe7S8, new surfaces of metallic nanoparticles are exposed during each discharge. Consequently, the decomposition of electrolyte results in SEI film formation, leading to a steady capacity increment. However, the ongoing electrolyte decomposition and unstable SEI may result in active component surrounded by SEI to form “isolated islands,” and block ion/electron transport, causing the loss of capacity. Moreover, the intermiate sodium polysulfide may react with carbonate ester electrolyte before Na2S formation, which will also lead to capacity loss.52-53 The above dicuss might explain the capacity degradation after the 150th cycle. The charge/discharge profiles of the 1st, 100th, 200th, 300th, 400th and 500th cycles for the FS-NGNs-80 are also displayed in Fig. S7. As can be seen, the initial discharge and charge plateaus have gradually disappeared and transformed into slopes. This may be due to the structure modulation resulting from the ongoing conversion reaction during repeating cycles.54-55 Owing to the superior conductivity of the N-doped graphene nanosheets, the FS-NGNs display excellent rate performance, as can be seen in Fig. 3d, where the current density steps up from 0.1 A g–1 to 10.0 A g–1. The FS-NGNs maintains capacities of 705, 712, 666, 650, 637, 581, 567 and 543 mA h g-1 at current densities of 0.1, 0.3, 0.5, 1.0, 3.0, 5.0 and 10.0 A g–1, respectively. Moreover, the discharge capacity returns to 762 mA h g–1 as the 0.1 A g–1 current density is recovered. And the corresponding Charge-discharge voltage profiles shown in Fig. S8 also maintain good conformity, exhibiting good robustness of the electrode. In conclusion, the excellent electrochemical performance of FS-NGNs is a remarkable result among iron sulfide-based anodes in the recent reports for SIBs, especially the high capacity after long-term cycling and high rate stability (Table S1). Electrochemical impedance spectroscopy (EIS) analysis was conducted for more detailed understanding of the role of N-doped graphene nanosheets in the enhancement of the conductivity of the FS-NGNs electrode. As shown in Fig. 3e, Fig. S9 and Table S2, the semicircle at the intermediate-frequency area can be identified as the charge-transfer resistance (Rct). Before cycling, Rct of the FS-NGNs is 50.9 Ω, which exhibits much lower resistance than that of bulk Fe7S8 (140 Ω) before reaction, mainly benefiting from the Fe7S8 nanocrystals and the high conductivity of N-doped graphene nanosheets. After 200 cycles, the Rct value of the FS-NGNs increases to 109.8 Ω, while the Rct of bulk Fe7S8 rises up significantly (273.6 Ω) due to the destruction of the structure during ongoing Na+ intercalation and extraction. Thus, the EIS result is evident to prove the high conductivity of the FS-NGNs.

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Fig. 4 (a) SEM, (b) TEM, (c) HRTEM and (d) SAED image of the cycled FS-NGNs. High resolution XPS analysis of the cycled FS-NGNs: (e) Fe 2p and (f) S 2p. (g) Illustration of the cycling process of the FS-NGNs.

ACS Paragon Plus Environment

Page 10 of 17

Page 11 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

To better understand the influence of nanostructure on the cycle stability of FS-NGNs, the morphology of the FS-NGNs after 500 cycles at 400 mA g-1 is investigated by SEM and TEM. As can be seen, the overall morphology of the N-doped graphene nanosheets remained without restacking, while the initial Fe7S8 nanocrystals are further converted into smaller particles anchored uniformly on the surface of the NGNs (Fig. 4a and Fig. S10). The above result maintains good accordance with previous analysis of capacity increment. The maintained nanosheet structure can be further confirmed by TEM image (Fig. 4b), where uniform distribution of cycled product can be observed clearly. The HRTEM image (Fig. 4c) exhibits lattice d-spacing of 0.25 nm, which is corresponding to (101) plane of FeS. The SAED pattern (Fig. 4d) also demonstrates series of diffraction rings correlated to (311), (220) and (101) planes of FeS, together with (102) and (100) planes of metal Fe, which is beneficial for improving the conductivity of the electrode. It is interesting to find out that the cycled products are FeS instead of Fe7S8. Actually, we have also analyzed the electrode after 100 cycles. The SAED pattern and HR-TEM image exhibited that Fe7S8 still existed, while no FeS was detected. This indicates that at least after 100 cycles the reversibility of Fe7S8 is satisfying (Fig. S11). However, as is discussed previously, after hundreds of times of repeating sodiation/desodiation, the ongoing new interface exposing among particles and continuous SEI formation may cause active component surrounded by SEI to form “isolated islands”. Moreover, the Fe nanoparticles formed during discharge process tend to aggregate, while the intermiate sodium polysulfide can react with carbonate ester electrolyte.56 The above factors may reduce the amounts of active materials and change the distribution and Fe/S ratio of the cycled products in nanoscale. On the other hand, the ion/electron transport in the “isolated islands” is blocked, while the intrinsic sluggish kinetic of Na+ transport makes it even harder for metallic Fe to be oxidized into Fe2+ than Fe3+, which means the full conversion have met more obstacles.53 Thus, the above discuss can explain the change in the conversion mechanism after 500 cycles. Nonetheless, this may not be an evidence to claim that FeS possesses better sodium ion storage performance than Fe7S8. Firstly, the unthorough conversion reaction also exists for FeS, because the conversion efficiency can’t reach 100%. Secondly, the theoretical capacity of Fe7S8 is higher than FeS owing to its smaller Fe/S ratio. Thirdly, the mixed valence state of Fe7S8 endows it higher electronic conductivity. To further analyze the composition of the cycled product and understand the reaction during cycles, we carried out XPS study on the cycled FS-NSN electrode. As can be seen in Fig. 4e, the fitted peaks at 712.1 and 716 eV are corresponding with Fe 2p1/2, while the peaks at 720, 724.3 and 730 eV are correlated with Fe 2p3/2. Among them, the peaks at 720 eV is the indication metallic Fe,57 while the other four peaks are in accordance with Fe2+.58-61 As for S 2p spectrum (Fig. 4f),the peak at 162.8 eV indicates the existence of metal sulfide,62 while the satellite peak at 169 eV could be ascribed to some surface absorbed oxidized S species, such as SO42- and HSO4-.63 This composition characterization further confirms the HRTEM and SAED analysis. Thus, the FS-NGNs can maintain good structural stability and high conductivity, ensuring stable cyclability and excellent rate performance. The corresponding cycling

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

process is illustrated in Fig. 4g. 4 Conclusion To sum up, Fe7S8 nanoparticles anchored on N-doped graphene nanosheets (FS-NGNs) fabricated by simple solvothermal reaction combined with post-heating treatment have been proved as a suitable anode material with high capacity and high rate cyclability for SIBs. The solid attachment of Fe7S8 and its cycling product to the N- doped graphene nanosheets is crucial for building up a robust structure to endure repeated Na+ insertion/extraction process. The FS-NGNs retains 391.3 mA h g-1 after 500 cycles at 400 mA g-1. Even at 10 A g-1, the capacity can maintain 543 mA h g-1. In general, this study has presented a feasible strategy to develop high performance metal-sulfide based hybrid anodes of future SIBs. Supporting Information XRD patterns of the as-prepared FS-NGNs and bulk Fe7S8 particles, backscattered electronic (BSE) image of the as-prepared FS-NGNs, SEM image of the bulk Fe7S8 particles, EDS elemental mapping of the Fe, S and C elements in FS-NGNs, charge-discharge profiles of the bulk Fe7S8 particles, TG analysis of the FS-NGNs-80, charge-discharge curves of the FS-NGNs-80 of certain cycles, charge-discharge profiles of the FS-NGNs at various current densities from 0.1 A g-1 to 10 A g-1, the equivalent circuit for EIS analysis, EIS analysis of the FS-NGNs and bulk Fe7S8 before and after cycling, BSE image of the cycled FS-NGNs, SAED pattern and HR-TEM image of the cycled FS-NGNs after 100 cycles, a comparison of electrochemical properties of iron sulfides as anode materials for SIBs Acknowledgements This work was financially supported by the National Key R&D Program of China (Grant No. 2018YFB0905400), National Natural Science Foundation of China (Grant No. 51432010) and fundamental research project from the Science and Technology Commission of Shanghai Municipality (No. 14JC1493000 and 15DZ2281200). References (1) Wang, J.; Liu, J.; Yang, H.; Chao, D.; Yan, J.; Savilov, S. V.; Lin, J.; Shen, Z. X. MoS2 Nanosheets Decorated Ni3S2@MoS2 Coaxial Nanofibers: Constructing an Ideal Heterostructure for Enhanced Na-Ion Storage. Nano Energy 2016, 20, 1-10. (2) Zhou, X.; Wan, L.-J.; Guo, Y.-G. Facile Synthesis of MoS2@CMK-3 Nanocomposite as an Improved Anode Material for Lithium-Ion Batteries. Nanoscale 2012, 4, 5868-5871. (3) Zhou, X.; Wan, L.-J.; Guo, Y.-G. Synthesis of MoS2 Nanosheet–Graphene Nanosheet Hybrid Materials for Stable Lithium Storage. Chem. Commun. 2013, 49, 1838-1840. (4) Cho, E.; Song, K.; Park, M. H.; Nam, K. W.; Kang, Y. M. SnS 3D Flowers with Superb Kinetic Properties for Anodic Use in Next-Generation Sodium Rechargeable Batteries. Small 2016, 12, 2510-2517. (5) Sun, W.; Rui, X.; Yang, D.; Sun, Z.; Li, B.; Zhang, W.; Zong, Y.; Madhavi, S.; Dou, S.; Yan, Q. Two-Dimensional Tin Disulfide Nanosheets for Enhanced Sodium Storage. ACS Nano 2015, 9, 11371-11381. (6) Liu, Y.; Yu, X.-Y.; Fang, Y.; Zhu, X.; Bao, J.; Zhou, X.; Lou, X. W. Confining

ACS Paragon Plus Environment

Page 12 of 17

Page 13 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

SnS2 Ultrathin Nanosheets in Hollow Carbon Nanostructures for Efficient Capacitive Sodium Storage. Joule 2018, 2, 725-735. (7) Yu, D. Y.; Prikhodchenko, P. V.; Mason, C. W.; Batabyal, S. K.; Gun, J.; Sladkevich, S.; Medvedev, A. G.; Lev, O. High-Capacity Antimony Sulphide Nanoparticle-Decorated Graphene Composite as Anode for Sodium-Ion Batteries. Nat. Commun. 2013, 4, 2922. (8) Shengjie, P.; Xiaopeng, H.; Linlin, L.; Zhiqiang, Z.; Fangyi, C.; Madhavi, S.; Stefan, A.; Seeram, R. Unique Cobalt Sulfide/Reduced Graphene Oxide Composite as an Anode for Sodium-Ion Batteries with Superior Rate Capability and Long Cycling Stability. Small 2016, 12, 1359-1368. (9) Liu, X.; Zhang, K.; Lei, K.; Li, F.; Tao, Z.; Chen, J. Facile Synthesis and Electrochemical Sodium Storage of CoS2 Micro/Nano-Structures. Nano Res. 2016, 9, 198-206. (10) Chao, D.; Zhu, C.; Yang, P.; Xia, X.; Liu, J.; Wang, J.; Fan, X.; Savilov, S. V.; Lin, J.; Fan, H. J.; Shen, Z. X. Array of Nanosheets Render Ultrafast and High-Capacity Na-Ion Storage by Tunable Pseudocapacitance. Nat. Commun. 2016, 7, 12122. (11) Wang, Y. X.; Yang, J.; Chou, S. L.; Liu, H. K.; Zhang, W.; Zhao, D.; Dou, S. X. Uniform Yolk-Shell Iron Sulfide-Carbon Nanospheres for Superior Sodium-Iron Sulfide Batteries. Nat. Commun. 2015, 6, 8689. (12) Hu, Z.; Zhu, Z.; Cheng, F.; Zhang, K.; Wang, J.; Chen, C.; Chen, J. Pyrite FeS2 for High-Rate and Long-Life Rechargeable Sodium Batteries. Energy Environ. Sci. 2015, 8, 1309-1316. (13) Liu, Z.; Lu, T.; Song, T.; Yu, X.-Y.; Lou, X. D.; Paik, U. Structure-Designed Synthesis of FeS2@C Yolk-Shell Nanoboxes as a High-Performance Anode for Sodium-Ion Batteries. Energy Environ. Sci. 2017, 10, 1576-1580. (14) Chen, S.; Kang, Z.; Zhang, X.; Xie, J.; Wang, H.; Shao, W.; Zheng, X.; Yan, W.; Pan, B.; Xie, Y. Highly Active Fe Sites in Ultrathin Pyrrhotite Fe7S8 Nanosheets Realizing Efficient Electrocatalytic Oxygen Evolution. ACS Cent. Sci. 2017, 3, 1221-1227. (15) Huang, W.; Li, S.; Cao, X.; Hou, C.; Zhang, Z.; Feng, J.; Ci, L.; Si, P.; Chi, Q. Metal-Organic Framework Derived Iron Sulfide-Carbon Core-Shell Nanorods as a Conversion-Type Battery Material. ACS Sustainable Chem. Eng. 2017, 5, 5039-5048. (16) Liu, B.; Zhang, F.; Wu, Q.; Wang, J.; Li, W.; Dong, L.; Yin, Y. Low Temperature Synthesis of Carbon Encapsulated Fe7S8 Nanocrystals as High Performance Anode for Lithium-Ion Batteries. Mater. Chem. Phys. 2015, 151, 60-65. (17) Luo, W.; Shen, F.; Bommier, C.; Zhu, H.; Ji, X.; Hu, L. Na-Ion Battery Anodes: Materials and Electrochemistry. Accounts of Chemical Research 2016, 49, 231-240. (18) Zhang, S.; Li, W.; Tan, B.; Chou, S.; Li, Z.; Dou, S. One-Pot Synthesis of Ultra-Small Magnetite Nanoparticles on the Surface of Reduced Graphene Oxide Nanosheets as Anodes for Sodium-Ion Batteries. J. Mater. Chem. A 2015, 3, 4793-4798. (19) Zhu, Y.; Murali, S.; Stoller, M. D.; Ganesh, K.; Cai, W.; Ferreira, P. J.; Pirkle, A.; Wallace, R. M.; Cychosz, K. A.; Thommes, M. Carbon-Based Supercapacitors Produced by Activation of Graphene. Science 2011, 332, 1537-1541.

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(20) Paraknowitsch, J. P.; Thomas, A. Doping Carbons Beyond Nitrogen: an Overview of Advanced Heteroatom Doped Carbons with Boron, Sulphur and Phosphorus for Energy Applications. Energy Environ. Sci. 2013, 6, 2839-2855. (21) Hummers Jr, W. S.; Offeman, R. E. Preparation of Graphitic Oxide. J. Am. Chem. Soc. 1958, 80, 1339-1339. (22) Cote, L. J.; Kim, F.; Huang, J. Langmuir-Blodgett Assembly of Graphite Oxide Single Layers. J. Am. Chem. Soc. 2008, 131, 1043-1049. (23) Truong, T. N. P.; Randriamahazaka, H.; Ghilane, J. Redox Monomer Ionic Liquid Based on Quaternary Ammonium: From Electrochemistry to Polymer Brushes. Electrochem. Commun. 2017, 82, 25-29. (24) He, Y.; del Valle, A.; Qian, Y.; Huang, Y.-F. Near Infrared Light-Mediated Enhancement of Reactive Oxygen Species Generation Through Electron Transfer from Graphene Oxide to Iron Hydroxide/Oxide. Nanoscale 2017, 9, 1559-1566. (25) Sadiq, M. M. J.; Shenoy, U. S.; Bhat, D. K. Enhanced Photocatalytic Performance of N-doped RGO-FeWO4/Fe3O4 Ternary Nanocomposite in Environmental Applications. Mater. Today Chem. 2017, 4, 133-141. (26) Pei, X.; Yan, Y. H.; Yan, L.; Yang, P.; Wang, J.; Xu, R.; Chan-Park, M. B. A Magnetically Responsive Material of Single-Walled Carbon Nanotubes Functionalized with Magnetic Ionic Liquid. Carbon 2010, 48, 2501-2505. (27) Singh, B.; Singh, J.; Kaur, R.; Moudgil, R. K.; Tripathi, S. K. Quantitative Measurement of Transport Properties: Ag-Doped Nanocrystalline CdS Thin Films. RSC Adv. 2017, 7, 53951-53962. (28) He, T.; Lin, N.; Du, Z.; Chao, Y.; Cui, J. The Role of Excess Sn in Cu4Sn7S16 for Modification of the Band Structure and a Reduction in Lattice Thermal Conductivity. J. Mater. Chem. C 2017, 5, 4206-4213. (29) Han, X.; Wu, X.; Zhong, C.; Deng, Y.; Zhao, N.; Hu, W. NiCo2S4 Nanocrystals Anchored on Nitrogen-Doped Carbon Nanotubes as a Highly Efficient Bifunctional Electrocatalyst for Rechargeable Zinc-Air Batteries. Nano Energy 2017, 31, 541-550. (30) Shen, K.; Mei, H.; Li, B.; Ding, J.; Yang, S. 3D Printing Sulfur Copolymer-Graphene Architectures for Li-S Batteries. Adv. Energy Mater. 2017, 8, 1701527. (31) Chen, H.; Wang, M. Q.; Yu, Y.; Liu, H.; Lu, S.-Y.; Bao, S.-J.; Xu, M. Assembling Hollow Cobalt Sulfide Nanocages Array on Graphene-like Manganese Dioxide Nanosheets for Superior Electrochemical Capacitors. ACS Appl. Mater. Interfaces 2017, 9, 35040-35047. (32) Li, F.; Li, Y.; Yang, X.; Han, X.; Jiao, Y.; Wei, T.; Yang, D.; Xu, H.; Nie, G. Highly Fluorescent Chiral N-S-Doped Carbon Dots from Cysteine: Affecting Cellular Energy Metabolism. Angew. Chem., Int. Ed. 2018, 57, 2377-2382. (33) Wang, T.; Kou, Z.; Mu, S.; Liu, J.; He, D.; Amiinu, I. S.; Meng, W.; Zhou, K.; Luo, Z.; Chaemchuen, S.; Verpoort, F. 2D Dual-Metal Zeolitic-imidazolate-Framework-(ZIF)-Derived Bifunctional Air Electrodes with Ultrahigh Electrochemical Properties for Rechargeable Zinc-Air Batteries. Adv. Funct. Mater. 2018, 28, 1705048. (34) Zhao, X.; Lu, Z.; Wei, M.; Zhang, M.; Dong, H.; Yi, C.; Ji, R.; Yan, Y. Synergetic

ACS Paragon Plus Environment

Page 14 of 17

Page 15 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Effect of Carbon Sphere Derived from Yeast with Magnetism and Cobalt Oxide Nanochains towards Improving Photodegradation Activity for Various Pollutants. Appl. Catal., B 2018, 220, 137-147. (35) Ai, F.; Liu, N.; Wang, W.; Wang, A.; Wang, F.; Zhang, H.; Huang, Y. Heteroatoms-Doped Porous Carbon Derived from Tuna Bone for High Performance Li-S Batteries. Electrochimi. Acta 2017, 80-89. (36) Cao, Y.; Xiao, L.; Sushko, M. L.; Wang, W.; Schwenzer, B.; Xiao, J.; Nie, Z.; Saraf, L. V.; Yang, Z.; Liu, J. Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications. Nano Lett. 2012, 12, 3783-3787. (37) Sun, B.; Chen, Z.; Kim, H.-S.; Ahn, H.; Wang, G. MnO/C Core–Shell Nanorods as High Capacity Anode Materials for Lithium-Ion Batteries. J. Power Sources 2011, 196, 3346-3349. (38) Kun, T.; Lijun, F.; J., W. R.; Linghui, Y.; Maria-Magdalena, T.; Markus, A.; Joachim, M. Hollow Carbon Nanospheres with Superior Rate Capability for Sodium-Based Batteries. Adv. Energy Mater. 2012, 2, 873-877. (39) Li, L.; Peng, S.; Bucher, N.; Chen, H.-Y.; Shen, N.; Nagasubramanian, A.; Eldho, E.; Hartung, S.; Ramakrishna, S.; Srinivasan, M. Large-Scale Synthesis of Highly Uniform Fe1-xS Nanostructures as a High-Rate Anode for Sodium Ion Batteries. Nano Energy 2017, 37, 81-89. (40) Li, Q.; Wei, Q.; Zuo, W.; Huang, L.; Luo, W.; An, Q.; Pelenovich, V. O.; Mai, L.; Zhang, Q. Greigite Fe3S4 as a new Anode Material for High-Performance Sodium-Ion Batteries. Chem. Sci. 2017, 8, 160-164. (41) Tang, K.; Fu, L.; White, R. J.; Yu, L.; Titirici, M. M.; Antonietti, M.; Maier, J. Hollow Carbon Nanospheres with Superior Rate Capability for Sodium-Based Batteries. Adv. Energy Mater. 2012, 2, 873-877. (42) Huang, Y.; Liu, H.; Lu, Y.-C.; Hou, Y.; Li, Q. Electrophoretic Lithium Iron Phosphate/Reduced Graphene Oxide Composite for Lithium Ion Battery Cathode Application. J. Power Sources 2015, 284, 236-244. (43) Liu, Y.; Zhao, Y.; Jiao, L.; Chen, J. A Graphene-Like MoS2/Graphene Nanocomposite as a High Performance Anode for Lithium Ion Batteries. J. Mater. Chem. A 2014, 2, 13109-13115. (44) Liu, Y.; Kang, H.; Jiao, L.; Chen, C.; Cao, K.; Wang, Y.; Yuan, H. Exfoliated-SnS₂ Restacked on Graphene as a High-Capacity, High-Rate, and Long-Cycle Life Anode for Sodium Ion Batteries. Nanoscale 2015, 7, 1325-32. (45) Xu, X.; Liu, J.; Liu, Z.; Shen, J.; Hu, R.; Liu, J.; Ouyang, L.; Zhang, L.; Zhu, M. Robust Pitaya-Structured Pyrite as High Energy Density Cathode for High Rate Lithium Batteries. ACS Nano 2017, 11, 9033-9040. (46) Xiao, Y.; Hwang, J.-Y.; Belharouak, I.; Sun, Y.-K. Na Storage Capability Investigation of a Carbon Nanotube-Encapsulated Fe1–xS Composite. ACS Energy Lett. 2017, 2, 364-372. (47) Zhang, Y.; Zhu, P.; Huang, L.; Xie, J.; Zhang, S.; Cao, G.; Zhao, X. Few-Layered SnS2 on Few-Layered Reduced Graphene Oxide as Na-Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability. Adv. Funct. Mater. 2015, 25, 481-489.

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(48) Choi, S. H.; Ko, Y. N.; Lee, J. K.; Kang, Y. C. 3D MoS2-Graphene Microspheres Consisting of Multiple Nanospheres with Superior Sodium Ion Storage Properties. Adv. Funct. Mater. 2015, 25, 1780-1788. (49) Bai, J.; Li, X.; Liu, G.; Qian, Y.; Xiong, S. Unusual Formation of ZnCo2O4 3D Hierarchical Twin Microspheres as a High-Rate and Ultralong-Life Lithium-Ion Battery Anode Material. Adv. Funct. Mater. 2014, 24, 3012-3020. (50) Zhu, J.; Yang, D.; Rui, X.; Sim, D.; Yu, H.; Hoster, H. E.; Ajayan, P. M.; Yan, Q. Facile Preparation of Ordered Porous Graphene-Metal Oxide@ C Binder-Free Electrodes with High Li Storage Performance. Small 2013, 9, 3390-3397. (51) Su, L.; Zhong, Y.; Zhou, Z. Role of Transition Metal Nanoparticles in the Extra Lithium Storage Capacity of Transition Metal Oxides: a Case Study of Hierarchical Core-Shell Fe3O4@C and Fe@C Microspheres. J. Mater. Chem. A 2013, 1, 15158-15166. (52) Wu, C.; Dou, S. X.; Yu, Y. The State and Challenges of Anode Materials Based on Conversion Reactions for Sodium Storage. Small 2018, 0, 1703671. (53) Hu, Z.; Liu, Q.; Chou, S. L.; Dou, S. X. Advances and Challenges in Metal Sulfides/Selenides for Next-Generation Rechargeable Sodium-Ion Batteries. Adv. Mater. 2017, 29, 1700606. (54) Huilin, P.; Xia, L.; Xiqian, Y.; Yong-Sheng, H.; Hong, L.; Xiao-Qing, Y.; Liquan, C. Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room-Temperature Sodium-Ion Batteries. Adv. Energy Mater. 2013, 3, 1186-1194. (55) Q., M. L.; B., H.; W., C.; Y., Q. Y.; S., L. C.; S., Y. R.; Y., D.; L., W. Z. Lithiated MoO3 Nanobelts with Greatly Improved Performance for Lithium Batteries. Adv. Mater. 2007, 19, 3712-3716. (56) Zhang, Y.; Zhou, Q.; Zhu, J.; Yan, Q.; Dou, S. X.; Sun, W. Nanostructured Metal Chalcogenides for Energy Storage and Electrocatalysis. Adv. Funct. Mater. 2017, 27, 1702317. (57) Jiang, F.-X.; Chen, D.; Zhou, G.-W.; Wang, Y.-N.; Xu, X.-H. The Dramatic Enhancement of Ferromagnetism and Band Gap in Fe-doped In2O3 Nanodot Arrays. Sci. Rep. 2018, 8, 2417. (58) Wang, Q.; Lei, Y.; Chen, Z.; Wu, N.; Wang, Y.; Wang, B.; Wang, Y. Fe/Fe3C@C Nanoparticles Encapsulated in N-Doped Graphene-CNTs Framework as an Efficient Bifunctional Oxygen Electrocatalyst for Robust Rechargeable Zn-Air Batteries. J. Mater. Chem. A 2018, 6, 516-526. (59) Zhai, T.; Sun, S.; Liu, X.; Liang, C.; Wang, G.; Xia, H. Achieving Insertion-Like Capacity at Ultrahigh Rate via Tunable Surface Pseudocapacitance. Adv. Mater. 2018, 30, 1706640. (60) He, X.; Li, R.; Liu, J.; Liu, Q.; chen, R.; Song, D.; Wang, J. Hierarchical FeCo2O4@NiCo Layered Double Hydroxide Core/Shell Nanowires for High Performance Flexible All-Solid-State Asymmetric Supercapacitors. Chem. Eng. J. 2018, 334, 1573-1583. (61) Hazi, J.; Mousavi, T.; Dudin, P.; van der Laan, G.; Maccherozzi, F.; Krzton-Maziopa, A.; Pomjakushina, E.; Conder, K.; Speller, S. C. Magnetic Imaging of Antiferromagnetic and Superconducting Phases in RbxFe2−ySe2 Crystals. Phys. Rev.

ACS Paragon Plus Environment

Page 16 of 17

Page 17 of 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

B 2018, 97, 054509. (62) Ge, Y.; Wang, C.; Zhao, Y.; Liu, Y.; Chao, Y.; Zheng, T.; Wallace, G. G. An Electrosynthesized 3D Porous Molybdenum Sulfide/Graphene Film with Enhanced Electrochemical Performance for Lithium Storage. Small 2018, 14, 1703096. (63) Mohamed, S. G.; Hussain, I.; Shim, J.-J. One-Step Synthesis of Hollow C-NiCo2S4 Nanostructures for High-Performance Supercapacitor Electrodes. Nanoscale 2018, 6620-6628. Table of Contens

ACS Paragon Plus Environment