New Experimental Data and Reference Models for ... - ACS Publications

Addition/Correction pubs.acs.org/jced

Correction to “New Experimental Data and Reference Models for the Viscosity and Density of Squalane” Kurt A. G. Schmidt,*,† Doug Pagnutti,‡ Meghan D. Curran,§ Anil Singh,∥ J. P. Martin Trusler,⊥ Geoffrey C. Maitland,⊥ and Mark McBride-Wright⊥ †

Schlumberger, Abingdon Technology Center, Lambourn Court, Wyndyke Furlong, Abingdon, OX14 1UJ, United Kingdom Schlumberger, DBR Technology Center, 9450-17 Ave, Edmonton, AB T6N 1M9, Canada § Department of Chemical and Materials Engineering, University of Alberta, 9107−116 Street, Edmonton, AB T6G 2 V4, Canada ∥ Schlumberger, Schlumberger Rosharon Campus, 14910 Airline Road, Rosharon, Texas 77583, United States ⊥ Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom ‡

J. Chem. Eng. Data 2015, 60 (1), 137−150. DOI:10.1021/je5008789

I

n Table 8 of the original paper, the parameters for the density model were labeled incorrectly. The partial table below correctly relates the parameters with their numerical values. This correction will allow readers to use the proposed density model correctly. Table 8. Results of the Regression Analysis Density Parameter a0/kg·m−3 a1/kg·m−3·K−1 a2/kg·m−3·K−2 C b0/MPa b1/MPa·K−1 b2/MPa·K−2

Value 9.789 × 1002 −5.355 × 10−01 −1.571 × 10−04 2.000 × 10−01 3.822 × 1002 −1.162 × 1000 9.305 × 10−04

It should be mentioned that all the results and findings reported in the original paper are valid. The authors would like to apologize for any inconvenience this may have caused.

■

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected].

Published: November 17, 2015 © 2015 American Chemical Society

698

DOI: 10.1021/acs.jced.5b00794 J. Chem. Eng. Data 2016, 61, 698−698