New Methods for Acquiring IR Spectral Data in Organometallic

Nov 24, 1987 - New Methods for Acquiring IR Spectral Data in Organometallic Chemistry and Catalysis. Donald J. Darensbourg and Guy Gibson. Department ...
0 downloads 0 Views 2MB Size
Chapter 9

New Methods for Acquiring IR Spectral Data in Organometallic Chemistry and Catalysis

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

Donald J . Darensbourg and Guy Gibson Department of Chemistry, Texas A & M University, College Station, T X 77843

The advent of new infrared sampling accessories has allowed in situ study of organometallic systems under conditions that were previously not readily accessible. The techniques of Cylindrical Internal Reflectance (CIR) and Diffuse Reflectance spectroscopies are described herein. The CIR phenomenon was employed in three different apparatus. Two different high pressure CIR cells were used to study reactions homogeneously catalyzed by [μ-HW(CO)10]-. Low temperature reactions of Mo and W complexes were studied using an ambient pressure CIR cell. The diffuse reflectance technique was employed to study powdered samples of Ru carbonyl complexes supported on A1 O . 2

2

3

It would be a vast understatement to assert that infrared spectro­ scopy has played a major r o l e i n the characterization of organo­ metallic derivatives, i n particular metal carbonyls (1,2). Hence, a discussion of the r o l e of infrared spectroscopy i n organometallic chemistry and catalysis i n our introductory comments w i l l be avoided. Nevertheless, i t i s unquestionably true that the enhanced signal/noise available v i a FTIR has dramatically changed IR spec­ troscopy. As the technology has changed, the accessories f o r sampling have changed (3). These i n turn have resulted i n a s i g n i f i c a n t impact on the type and quality of experiments that can be r e a d i l y performed. We wish to describe i n t h i s chapter some of the new and innov­ ative infrared accessories commercially available to the exper­ imental chemist. A l l of the infrared items described herein were obtained from Spectra Tech, Inc. (652 Glenbrook Road, P. 0. Box 2190-G, Stanford, CT 06906, Ph. (800)243-9186). The conditions for which we have demonstrated the use of these devices involving i n s i t u infrared spectroscopy include the following:

• High pressure and high temperature solution phase reactions carried out i n both batch-mode or flow-through reactors. 0097-6156/87/0357-0230$06.00/0 © 1987 A m e r i c a n C h e m i c a l Society

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

9. DARENSBOURG & GIBSON

Methods for Acquiring IR Spectral Data

• Temperature controlled (high or low) solution phase reactions under gaseous atmospheres. • S o l i d samples, high temperature under reactive gaseous atmospheres.

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

C y l i n d r i c a l Internal Reflectance A technique which has proven useful for our studies i s that of c y l i n d r i c a l internal reflectance (CIR), coupled with a Fourier transform infrared spectrometer. In t h i s study, an IBM-85 FTIR equipped with either a DTGS (deuterated t r i g l y c i n e s u l f a t e ) or MCT (mercury-cadmium-tellurium) detector was used. The infrared r a d i ­ ation i s focused by concave mirrors onto the 45° conical ends of a transmitting c r y s t a l (Figure 1). The c r y s t a l may be made of any material which i s o p t i c a l l y transparent, has a high mechanical strength and high index of r e f r a c t i o n , and i s resistant to thermal shock and chemical attack. Suitable materials include ZnS, ZnSe, S i , Ge, and sapphire. As the beam passes through the c r y s t a l , i t penetrates into the surrounding solution a distance of approximately 1.0-1.5um. Therefore, ten r e f l e c t i o n s give a t o t a l pathlength of 10-15pm. The beam i s then focused onto the detector. This i s a r e l a t i v e l y low throughput technique. The percent of the energy getting through the accessory without sample present i s about 15% of the open beam throughput. However, good signal/noise r a t i o s can be achieved using standard DTGS detectors, and improved r a t i o s are achieved with MCT detectors. I t i s important to note that the internal r e f l e c t i o n element and the input and output optics of the commercially available c e l l s used i n our e f f o r t s are maintained i n a r i g i d , fixed p o s i t i o n . This ensures that the pathlength i s highly repeatable during a series of infrared measurements, a property pivotal to r e l i a b l e quantitative r e s u l t s . Pathlength reproduci­ b i l i t y i s invariably a problem with conventional transmission c e l l s used at high pressure and/or high temperatures. External High Pressure Flow C e l l . The p r i n c i p l e of internal r e f l e c ­ tance has been put to use i n several different apparatus. The f i r s t of these used i n our lab was a stainless steel high pressure (to 1500 p s i ) c e l l , the CIRCLE®, with a 25μ1 internal volume for the study of homogeneously catalyzed reactions (Figure 2). In t h i s case, the c e l l was connected to a 300ml stainless steel high pressure reactor by means of 1/16" stainless s t e e l tubing. Samples were p e r i o d i c a l l y delivered from the reactor to the c e l l during catalysis with both being maintained at the same pressure. With suitable pumping, samples could be returned to the reactor, however i n our instance samples were simply discarded after spectra were recorded. A high temperature jacket i s available for t h i s c e l l which can withstand temperatures up to 250°C. Figure 3 depicts FTIR spectra of the reaction of a C0 /H mixture and methanol at 125°C and 860psi to form methyl formate catalyzed by y-H[W (CO) ]~ (£). The two strong peaks due to the s t a r t i n g metal carbonyl complex at I^Ocm"" and 1890cm"" decrease while an attendant peak at 1980cm" due to W(C0) increases i n i n t e n s i t y . When a l l the s t a r t i n g complex has been consumed, a 2

2

10

1

1

1

6

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

2

231

232

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

ROD CRYSTALη

Ί

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

-4

Γ

Γ" 7 ΖΛ / Jfi ^\ SJ^fr/ V—V V /\Χ Λ ^ J &ΙI V

. i

^-CONE Ρ

F i g u r e 1.

T0R0ID

The c y l i n d r i c a l

£η

i n t e r n a l r e f l e c t a n c e element.

F i g u r e 2. M i c r o CIRCLE h i g h - p r e s s u r e courtesy of Spectra-Tech, Inc.)

flow c e l l .

(Photograph

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

9.

DARENSBOURG & GIBSON

Methods for Acquiring IR Spectral Data 1

weaker band i s noted a t about 1930cm" (marked *) which i s a t t r i buted t o the m e t a l l o f o r m a t e s p e c i e s HC0 W(C0) ~. Based on the r a t e of methyl formate p r o d u c t i o n (as evidenced by GC), t h e m e t a l l o f o r m a t e d e r i v a t i v e i s d e s c r i b e d as an i n t e r m e d i a t e i n the C 0 reduct i o n r e a c t i o n . D e f i n i t i v e assignment of the peak a t 1930cm" t o the HC0 W(C0) " s p e c i e s was c o n f i r m e d by an independent s y n t h e s i s of t h i s complex and i t s spectrum r e c o r d e d under i d e n t i c a l c o n d i t i o n s (bold l i n e i n Figure 3). A c a t a l y t i c c y c l e based on t h e s e o b s e r v a t i o n s i s shown i n Scheme I . The d e c o m p o s i t i o n of the s t a r t i n g m a t e r i a l H W ( C 0 ) " t o HW(C0) " and i t s subsequent r e a c t i o n w i t h C 0 t o y i e l d HC0 W(C0) " have been r e p o r t e d elsewhere ( 5 , 6 ) . The presence o f f o r m i c a c i d , w h i c h s u b s e q u e n t l y undergoes e s t e r i f i c a t i o n t o a f f o r d methyl f o r m a t e , was d e t e c t e d by GC when the r e a c t i o n was c a r r i e d out i n benzene. 2

5

2

1

2

5

2

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

5

1 0

2

2

5

i n s i t u H i g h P r e s s u r e C e l l . Another means of o b t a i n i n g h i g h p r e s s u r e FTIR s p e c t r a employs a m o d i f i e d P a r r m i n i - r e a c t o r cont a i n i n g an imbedded i n t e r n a l r e f l e c t a n c e c r y s t a l ( F i g u r e H). This t e c h n i q u e was f i r s t developed by Moser, e t a l . ( 7 ) . The c r y s t a l i s h e l d i n p l a c e by t e f l o n r e t a i n e r s , and t h e r e a c t i o n m i x t u r e i s s t i r r e d by a magnetic i m p e l l e r system. The r e a c t i o n c e l l body i s f a b r i c a t e d from 316 s t a i n l e s s s t e e l and i s i n t e n d e d t o w i t h s t a n d p r e s s u r e s as h i g h as 1000 p s i and temperatures up t o 250°C. The volume of t h e r e a c t o r i s a p p r o x i m a t e l y 15ml. The r e a c t o r / c e l l i s p l a c e d d i r e c t l y o n t o the o p t i c a l bench o f the FTIR instrument i n our experiments. Potassium bromide windows a r e s e c u r e d over t h e o p t i c a l p a t h openings i n the i n s t r u m e n t ' s sample compartment t o prevent damage t o t h e o p t i c a l bench i n case of r e a c t o r r u p t u r e . A l t e r n a t i v e l y , an e x t e r n a l sampling bench i s a v a i l a b l e w i t h the CIR r e a c t i o n c e l l ( F i g u r e 5) which o f f e r s p r o t e c t i o n of t h e IR i n s t r u m e n t from hazardous e x p e r i m e n t s . Of course the use o f t h i s e x t e r n a l bench r e s u l t s i n a d d i t i o n a l l o s s of energy throughput (~50$). T h i s method o f o b t a i n i n g s p e c t r a i s t r u l y i n s i t u s p e c t r o s c o p y . I t i s s u p e r i o r t o the p r e v i o u s l y d e s c r i b e d h i g h p r e s s u r e method i n t h a t the r e a c t i o n m i x t u r e need not be t r a n s f e r r e d t o a s e p a r a t e c e l l , thus a l l o w i n g c o o l i n g and u n d e s i r a b l e r e a c t i o n s t o o c c u r . However, the e x t e r n a l sampling t e c h n i q u e o f f e r e d by the f l o w r e a c t o r d e s c r i b e d above may be more a p p l i c a b l e t o l a r g e s c a l e i n d u s t r i a l use. The i n s i t u h i g h p r e s s u r e system was used t o a n a l y z e the r e a c t i o n of CO and methanol t o form methyl f o r m a t e , a g a i n c a t a l y z e d by y-H[W (CO)! ]~ ( F i g u r e 6) ( 8 , 9 ) . A c a t a l y t i c scheme has been proposed f o r t h i s r e a c t i o n whereby the c a t a l y s t i s h e t e r o l y t i c a l l y c l e a v e d under CO p r e s s u r e , y i e l d i n g HW(C0) " and W(C0) (Scheme I I ) . The metal h y d r i d e a n i o n i s p r o t o n a t e d by methanol t o g i v e H and the methoxide a n i o n , which a t t a c k s a c a r b o n y l l i g a n d on W(C0) t o g i v e a s h o r t - l i v e d m e t a l l o e s t e r i n t e r m e d i a t e . T h i s s p e c i e s i s p r o t o n a t e d by MeOH t o g i v e product and r e g e n e r a t e methoxide. The i n s i t u IR of W(C0) and OMe" i n THF at 500 p s i CO p r e s s u r e d i s p l a y s a t h r e e band p a t t e r n t y p i c a l of W(C0) X", where X" i s presumably C ( 0 ) 0 C H " . A l t h o u g h t h i s m e t l a l l o e s t e r i n t e r m e d i a t e was not i s o l a t e d , t h e a n a l ogous more s t a b l e phenyl a c y l complex has been more f u l l y c h a r a c t e r i z e d . I n a d d i t i o n , the W(C0) 0Ph" d e r i v a t i v e has been the subj e c t of an X-ray s t r u c t u r e d e t e r m i n a t i o n ( 1 0 ) . 2

0

5

6

2

6

6

5

3

5

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

233

234

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

97.5

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

92.25

87.0

81.75

76.5 2100

2000

1900

1800

WAVENUMBERS CM-1 F i g u r e 3. I n f r a r e d spectrum o f o p e r a t i n g c a t a l y s t system as a f u n c t i o n o f r e a c t i o n time. Peak marked w i t h a s t e r i s k due t o HC0 W(C0) ". 2

5

— CELL HEAD ASSY.

0-RING SPACERS THERMOCOUPLE IMPELLER RETAINERS CRYSTAL

CELL HEATER PORT

Figure

4.

The CIR r e a c t i o n

cell.

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

Methods for Acquiring IR Spectral Data

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

9. DARENSBOURG & GIBSON

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

236

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

F i g u r e 5. The e x t e r n a l s a m p l i n g bench, shown here w i t h t h e CIR r e a c t i o n c e l l i n s t a l l e d a t the center. (Photograph c o u r t e s y o f Spectra-Tech, Inc.)

ι ι w(co) . 6

I

*[M.-HW (CO) ]" 2

10

0.2063

W

methyl formate

U M Ο

0.1375

CO


-σ cd ο c Ο τΗ Ό Ο cd OJ Ο ο Ο rH ρ ο CO cd Ο >> LH . ο C Ό τ— um

•Η

ο Φ Ν

cd

Ρ

Ό

- > Όcd Οω

Ο -Ρ Φ r H Ο ϋ Ρ rH cd m cd ο

w

CC

·

γΗ

> Φ

JC



φs

ο c ο 5ο ο •γΗ Ο Φ u

S

cd ο

ΤΗ

cd g C\J H Ρ En > rcd cd

(%) 3DNVIXIWSNVHX

American Chemical Society Library 1155 16th St. N.W. 20036 In ExperimentalWashington, Organometallic D.C. Chemistry; Wayda, A., et al.; f

ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

248

are quite different f o r the two catalyst preparations. S i m i l a r l y the r e a c t i v i t i e s of these two catalysts toward C0 hydrogénation to methane are quite d i f f e r e n t , with the R u ( C 0 ) derived catalyst being approximately 10 times more active. I t should be noted that the spectrum obtained of activated R u ( C 0 ) on A 1 0 i s e s s e n t i a l l y i d e n t i c a l to that reported by Bell and coworkers on analogously treated wafered samples (J_6). We f i n d that the ease with which the supported catalysts can be loaded i n an inert atmosphere dry box, coupled with the lack of having to prepare wafered samples which transmit i n the infrared and the a b i l i t y to heat the sample under a flow of reactive gases, makes the COLLECTOR™ accessory p a r t i c u l a r l y suited to these research e f f o r t s . 2

3

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

3

12

l2

2

3

Acknowledgments We are most appreciative to Spectra Tech Inc., 652 Glenbrook Road, P. 0. Box 2215, Stamford, CT 06906 for t h e i r generous support of our research e f f o r t s .

Literature Cited 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.

Adams, D. M. Metal-Ligand and Related Vibrations; St. Martin's Press: New York, 1968. Braterman, P. S. Metal Carbonyl Spectra; Academic Press: London, 1975. See, for example, Spectra Tech Inc. brochure entitled "The Leading Edge in IR/ FTIR Accessories", Stamford, CT 06906, 1986. Darensbourg, D. J.; Ovalles, C. J . Am. Chem. Soc. 1984, 106, 3750. Darensbourg, D. J.; Rokicki, Α.; Darensbourg, M. Y. J. Am. Chem. Soc. 1981, 103, 3223. Darensbourg, D. J.; Rokicki, A. Organometallics 1982, 1, 1685. Moser, W. R.; Cnossen, J . E . ; Wang, A. W.; Krouse, S. A. J . Catal. 1985, 95, 21. Darensbourg, D. J.; Ovalles, C.; Pala, M. J . Am. Chem. Soc. 1983, 205, 5937. Darensbourg, D. J.; Gray, R. L . ; Ovalles, C.; Pala, M. J . Molec. Catal. 1985, 29, 285. Darensbourg, D. J.; Summers, K. M.; Rheingold, A. L. J . Am. Chem. Soc. 1987, 109, 290. Tooley, P. Α.; Ovalles, C.; Kao, S. C . ; Darensbourg, D. J.; Darensbourg, M. Y. J . Am. Chem. Soc. 1986, 108, 5465. Arabi, M. S.; Mathieu, R.; Poilblanc, R. J . Organomet. Chem. 1976, 104, 323. For a recent review on the methanantion of CO see: Darensbourg, D. J.; Bauch, C. G.; Ovalles, C. Rev. Inorg. Chem. 1985, 7, 315. Ferbull, H. E . ; Stanton, D. J.; McCowan, J . D.; Baird, M. C. Can. J . Chem. 1983, 61, 1306. Darensbourg, D. J.; Ovalles, C. Inorg. Chem. 1986, 25, 1603. Kuznetsov, V. L.; Bell, A. T.; Yermanov, Y. I. J . Catal. 1980, 65, 374. 2

RECEIVED September 14, 1987

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

Chapter 9: Application 1

A Simple Low-Temperature Solution IR Cell Wolfdieter A. Schenk

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

Institut für Anorganische Chemie, Universität Würzburg, Am Hubland, D-8700 Wurzburg, Federal Republic of Germany

In metal carbonyl chemistry, infrared spectroscopy continues to be the most often used physical method for product characterization. Occasionally it is desirable to obtain solution spectra at low temperature, e. g., -

to investigate temperature-dependent equilibria,

-

to record spectra of samples which decompose at ambient temperature in solution,

-

to characterize unstable intermediates.

The cell itself is made out of two round pieces of brass with a diameter of 42 mm, into which rectangular openings (21 χ 16 mm) are cut. The bottom part is 15 mm thick, a section 23 mm wide and 8 mm deep is cut as indicated in Fig. 1 to accommodate the windows. The top part is 8 mm thick and contains two bores which fit together with the holes of commercially available 38.5 x 22.0 χ 4.0 mm solution cell windows. Luer-type syringe adaptors are soldered into these holes to provide an easy connection with metal or teflon tubing. The entire assembly is held together by four screws and spring washers as indicated in Fig. 1. Amalgamated lead gaskets should be preferred over the usual teflon to ensure good heat transfer. The cell windows should be made of water-resistant material such as calcium fluoride or Irtran. The cooling block is cut out of a round piece of brass, 75 mm in diameter and 50 mm long. A concentric hole, 42.5 mm in diameter (a 0.5 mm gap between cell and cooling block is necessary to allow for thermal contraction) is cut out to depth of 45 mm; the remaining 5 mm are cut out to 30 mm diameter. On top of the block a metal box of approximate dimensions 50 χ 45 χ 25 mm is soldered. A small bore at the side of the block may serve as thermometer well. A rectangular piece of heavy-duty plastic with dimensions appropriate to slide into the sample holder of the spectrometer is attached to the back of the block (see Fig. 2 for details). Finally, two holes are drilled into the cooling block and plastic holder and fitted with brass tubings to provide a nitrogen purge. 0097-6156/87/0357-0249S06.00/0 © 1987 American Chemical Society

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

250

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

F i g u r e 1. The c e l l : a) t o p p a r t , b) bottom p a r t , c ) l e a d g a s k e t , d) window, e) t e f l o n s p a c e r . A l l measures i n mm.

F i g u r e 2. The c o o l i n g b l o c k : view. A l l measures i n mm.

a) s i d e view, b) t o p v i e w , c ) f r o n t

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

9.1

SCHENK

251

Simple Low-Temperature Solution IR Cell

To c o o l the e n t i r e assembly the m e t a l box on top o f the c o o l i n g b l o c k i s f i l l e d w i t h crushed dry i c e and a few ml of i s o p r o p a n o l u n t i l the d e s i r e d t e m p e r a t u r e i s r e a c h e d . A c o n s t a n t f l o w of N , p r e c o o l e d by p a s s i n g i t t h r o u g h a c o i l e d copper tube immersed i n l i q u i d n i t r o g e n , i s passed t h r o u g h the b l o c k t o prevent m o i s t u r e from c o n d e n s i n g o n t o the c e l l windows.

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

2

To o b t a i n s p e c t r a o f l a b i l e compounds a p l a s t i c s y r i n g e i n s e r t e d i n t o a s u i t a b l e h o l e of a c o l d aluminium b l o c k i s used t o t r a n s f e r the s o l u t i o n t o the l o w e r bore of the c e l l . A p i e c e of t e f l o n t u b i n g c o n n e c t s t h e upper bore w i t h a s m a l l v i a l t o r e c e i v e e x c e s s solution. T h i s method has been s u c c e s s f u l l y a p p l i e d t o o b t a i n s p e c t r a Of such l a b i l e compounds as M ( C 0 ) ( S 0 ) (M = C r , Mo, W) , cis-W(C0)„(PiPr ) , and cis-W(CO ) „( Pj.Pr ) ( C H j . Reactive i n t e r m e d i a t e s can be o b s e r v e d by u s i n g two s y r i n g e s c o n t a i n i n g the r e a c t a n t s and c o n n e c t i n g them v i a s m a l l m i x i n g chamber w i t h the cell. The p r o t o n a t i o n o f [ W C C O ) ^ I ) ( P M e ) ] " * and the r e a c t i o n s of v a r i o u s o l e f i n c o m p l e x e s " * have been m o n i t o r e d by t h i s method. 1

5

2

2

3

2

3

2

3

3

2

S o l v e n t compensation i s s l i g h t l y more cumbersome t h a n i n o r d i n a r y work because a l l a b s o r p t i o n s become s h a r p e r and i n c r e a s e i n i n t e n s i t y w i t h d e c r e a s i n g t e m p e r a t u r e . Use of a v a r i a b l e - p a t h l e n g t h reference c e l l a l l e v i a t e s most of the problems. The method of c h o i c e , however, i s t o r u n s o l v e n t s p e c t r a at v a r i o u s t e m p e r a t u r e s and use computer s u b t r a c t i o n which i s nowadays a v a i l a b l e even w i t h medium-priced d i s p e r s i v e i n s t r u m e n t s . A few p r e c a u t i o n s s h o u l d be o b s e r v e d when w o r k i n g w i t h t h i s cell. Under c o n d i t i o n s of h i g h h u m i d i t y i t might be n e c e s s a r y t o p l a c e a mask over the f r o n t of the c o o l i n g b l o c k w i t h an o p e n i n g j u s t wide enough f o r t h e i . r . beam t o pass. A l s o , i t s h o u l d be remembered t h a t most s i n g l e c r y s t a l w i n d o w " m a t e r i a l s a r e s e n s i t i v e t o t h e r m a l shock. The c e l l s h o u l d t h e r e f o r e be a l l o w e d t o warm at l e a s t t o 0°C b e f o r e i t i s c l e a n e d . REFERENCES 1.

Schenk, W.

A.;

Baumann, F. E.; Chem. Ber. 1982,

2.

Schenk, W.

Α.;

Müller, Η.,

3.

Schenk, W.

Α.,

4.

Schenk, W.

Α.;

Z. Anorg.

Allg.

115,

Chem. 1981,

2615. 478,

unpublished. Müller, Η.,

I n o r g . Chem. 1981,

20,

6.

ACKNOWLEDGMENT I thank Mr. W. cell. RECEIVED September 22,

Riidling f o r h i s expert help i n b u i l d i n g t h i s

1987

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

205.

Chapter 9: Application 2

Quantum Yield Determination by IR Spectrophotometry Frederick R. Lemke and Clifford P. Kubiak

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

Department of Chemistry, Purdue University, West Lafayette, IN 47907

Quantum yields are often useful quantitative measures of the efficiency of photochemical processes. Among the more traditional methods of quantum yield determination is ferrioxalate actinometry by UV-vis spectrophotometry. Since many organometallic complexes contain strong infrared chromophores, e.g. C≡O, C≡NR, we describe herein a method for determining quantum yields in CaF solution IR cells using a novel and simple actinometer: the photochemical disappearance of Mn(CO)10 in neat CCl to give Mn(CO)Cl (1). At a given wavelength of irradiation, the unknown quantum efficiency of a photoprocess, Φx, can be related to the known quantum efficiency, ΦMn, for the photoreaction of Mn(CO)10 by Equation 1 (2). 2

2

4

5

ΔAν≡change in IR absorbance of the band at V for the reacting species. Δt ≡ irradiation time. ε ≡ extinction coefficient of the IR band at ν. Aλirr ≡ UV-vis absorbance at the wavelength of irradiation. irr

1-10-Aλ ≡ fraction of incident light absorbed by the sample at the wavelength of irradiation. Note that i f the experiment i s carried out at concentrations and wavelengths such that A ^ i r r > 1 then the f r a c t i o n of l i g h t absorbed

0097-6156/87/0357-0252$06.00/0 © 1987 A m e r i c a n C h e m i c a l Society

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

9.2

LEMKE AND KUBIAK

Quantum Yield Determination

253

approaches unity and t h i s l a t t e r term can be ignored. Equation 1 also i s not r e l i a b l e for large changes i n A ^ i r r . The idea i s to work at optical densities as high as possible at the i r r a d i a t e d wavelengths, and to base quantum y i e l d s on the early phases of the reaction. A solution of the photosensitive organometallic complex i s prepared and f reeze-pump-thaw degassed on a high-vacuum l i n e . The solution concentration must be known so that the extinction c o e f f i c i e n t , ε , of the IR band of the organometallic compound can be determined. The solution i s transferred to a 0.05-0.2 mm pathlength CaF solution IR c e l l . Exclusion of oxygen i n photochemical experiments i s extremely important. Solution transfer therefore should be performed i n an i n e r t atmosphere box. The extinction c o e f f i c i e n t , ε , i s determined by Beer's law from the concentration of complex and pathlength of your c e l l , before i r r a d i a t i o n . The sample i s photolyzed i n the IR c e l l (CaF transmits UV l i g h t to 120 nm ( J ) ) . [CAUTION: Eye protection to block out harmful UV i r r a d i a t i o n i s necessary. Regular safety goggles cutoff at ~ 290 nm. Special UV goggles with cutoff at ~ 366 nm are commercially available.] IR spectra are recorded over the course of photolysis, At^, monitoring the absorbance changes, ΔΑ , of the IR chromophore of interest. Quantum y i e l d s are determined r e l a t i v e to the disappearance of Mi^CCO)^ i n neat, degassed CCl^. χ

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

2

χ

2

χ

The disappearance of Mi^CCO)^, A A ^ ° , i s conveniently monitored by the v band at 1970 cm" (e (1970 cm" ) = 4500 L mol" cm" ). For samples i r r a d i a t e d at 313 nm, the quantum y i e l d f o r disappearance of MIL,(C0KQ, = 0.48 (1). For samples irradiated at 366 nm, 5 ^ = 0.41 ( l J . Clearly, IR actinometers for other regions of the UV-vis spectrum can be developed with accurate quantum y i e l d data for photochemical reactions occurring at other wavelengths. 1

c o

1

1

1

M n

Literature Cited 1. Wrighton, M. S.; Ginley, D. S. J. Am. Chem. Soc. 1975, 91, 2065. 2. Reinking, M. K.; Kullberg, M. L.; Cutler, A. R.; Kubiak, C. P. J. Am. Chem. Soc. 1985, 107. 3517. 3. Gordon, A. J . ; Ford, R. A. The Chemist's Companion: A Handbook of P r a c t i c a l Data. Techniques, and References: John Wiley and Sons: New York, 1972; p 180. RECEIVED September 24,

1987

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

Chapter 9: Application 3

Spectrophotometric Cell for Inorganic and Organometallic Complexes Under Inert Atmospheric Conditions

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

Janet L. Marshall, Michael D. Hopkins, and Harry B. Gray Arthur Amos Noyes Laboratory, California Institute of Technology, Pasadena, CA 91125 In the course of our research, we routinely measure UV-VIS absorption and emission spectra of inorganic and organometallic complexes under inert atmos­ phere conditions. In many cases, we are interested in monitoring the changes in the spectrum of a complex following the addition(s) of a given reagent. We have found that these experiments are facilitated by using the spectrophoto­ meter cell shown in Figure 1. This cell, which can be readily made by a professional glassblower, is designed for the preparation of solutions on a high vacuum line. It consists of a 10 mm pathlength square cuvette, of either Pyrex or quartz, and a small Pyrex bulb that is separated from the cuvette by a right angle valve. The cuvette of the cell shown in Figure 1 is a commercial fluorimeter cell with a 10 mm pathlength and attached graded seal tube (NSG Precision Cells, Type 63). Alternatively, the cuvette can be fashioned from 10 mm square tubing of either clear fused quartz (Wilmad Glass Company, WSQ-110, 20 mm I.D., 12 mm O.D.) or borosilicate glass (Wilmad Glass Company, WS-110-H, 10.0 mm I.D., 1.50 mm wall). The quartz cuvette constructed from the square tubing is attached to the round Pyrex tubing of the cell via a graded seal such as the Pyrex to Vycor glass graded seal (Corning 6466 from VWR Scientific). The small bulb used for the collection of the solvent and mixing of the solution is blown from heavy-walled Pyrex tubing to the desired diameter. The round tubing connecting the cuvette to the bulb is heavy-walled Pyrex tubing. The bulb is attached to the cuvette via a right angle Teflon vacuum valve (Kontes K-826610, size 4). Similarly, the cuvette is attached to a 24/40 female standard taper ground glass joint with the same type of right angle Teflon vacuum valve allowing the cell to be used readily on a vacuum line. In practice, the inorganic or organometallic complex is loaded into the cell in an inert atmosphere box, if necessary, and the solution is prepared on a vacuum line by vacuum transfer of well-degassed solvent. After the desired spectrum is obtained, the solution is distilled into the Pyrex bulb by cooling the bulb in liquid nitrogen. The Teflon vacuum valve separating the cuvette from the pyrex bulb is closed and the additional reagent(s) can be added to the cell by removing the Teflon plug from the other vacuum valve. After addition of the reagent(s), which can be done in an inert atmosphere box, the cell is reevacuated on the vacuum line. Afterwards, the Teflon valve between the bulb and cuvette can be opened to allow mixing of the cell contents. This procedure can be repeated as often as desired. 0097-6156/87/0357-0254$06.00/0 © 1987 American Chemical Society

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

MARSHALL ET AL.

Spectrophotometric Cell

255

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

9.3

Figure 1 ( l e f t ) . Photograph of a s p e c t r o p h o t o m e t e r c e l l f o r measurements under i n e r t atmosphere c o n d i t i o n s . The c e l l p a t h l e n g t h i s 10 mm. F i g u r e 2 ( r i g h t ) . Photograph of the c e n t r i f u g e - t u b e assembly f o r measurements of s o l v e n t volume.

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.

256

EXPERIMENTAL ORGANOMETALLIC CHEMISTRY

Downloaded by UNIV OF MICHIGAN ANN ARBOR on February 18, 2015 | http://pubs.acs.org Publication Date: November 24, 1987 | doi: 10.1021/bk-1987-0357.ch009

For some experiments using this spectrophotometric cell, one may need to know the volume of solvent. This can be determined by first transferring the solvent into the modified graduated centrifuge tube shown in Figure 2 followed by vacuum transfer of the solvent into the bulb of the spectrophotometric cell. The centrifuge tube (15 mL capacity, Pyrex, Corning 8100 from VWR Scientific) is fitted with a 14/20 standard taper female ground glass joint. This tube is then used in conjunction with a right angle Teflon vacuum valve (Kontes K-826610, size 4) fitted with a 14/20 standard taper male ground glass joint and 24/40 standard taper female ground glass joint that can be attached to a vacuum line. Acknowled gm ent We thank Siegfried Jenner, Erich Siegel, and Gabor Faludi of the Caltech Glass Shop for their assistance. Our research in inorganic photochemistry is supported by the National Science Foundation. This is Contribution No. 7486 from the Arthur Amos Noyes Laboratory. RECEIVED August 11,1987

In Experimental Organometallic Chemistry; Wayda, A., et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 1987.