NiOOH Exfoliation-Free Nickel Octahedra as Highly Active and

Mar 7, 2018 - A layered β-NiOOH crystal with undercoordinated facets is an active and economically viable nonnoble catalyst for the oxygen evolution ...
0 downloads 5 Views 5MB Size
Research Article Cite This: ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

www.acsami.org

NiOOH Exfoliation-Free Nickel Octahedra as Highly Active and Durable Electrocatalysts Toward the Oxygen Evolution Reaction in an Alkaline Electrolyte Byeongyoon Kim,†,‡,⊥ Aram Oh,§,⊥ Mrinal Kanti Kabiraz,∥,⊥ Youngmin Hong,∥ Jinwhan Joo,†,‡ Hionsuck Baik,§ Sang-Il Choi,*,∥ and Kwangyeol Lee*,†,‡ †

Department of Chemistry, Korea University, Seoul 02841, Korea Center for Molecular Spectroscopy and Dynamics, Institute for Basic Science (IBS), Seoul 02841, Korea § Korea Basic Science Institute (KBSI), Seoul 02841, Korea ∥ Department of Chemistry and Green-Nano Materials Research Center, Kyungpook National University, Daegu 41566, Korea ‡

S Supporting Information *

ABSTRACT: A layered β-NiOOH crystal with undercoordinated facets is an active and economically viable nonnoble catalyst for the oxygen evolution reaction (OER) in alkaline electrolytes. However, it is extremely difficult to enclose the βNiOOH crystal with undercoordinated facets because of its inevitable crystal transformation to γ-NiOOH, resulting in the exfoliation of the catalytic surfaces. Herein, we demonstrate {111}-faceted Ni octahedra as the parent substrates whose surfaces are easily transformed to catalytically active β-NiOOH during the alkaline OER. Electron microscopic measurements demonstrate that the horizontally stacked β-NiOOH on the surfaces of Ni octahedra has resistance to further oxidation to γ-NiOOH. By contrast, significant crystal transformation and thus the exfoliation of the γ-NiOOH sheets can be observed on the surfaces of Ni cubes and rhombic dodecahedra (RDs). Electrocatalytic measurements show that the β-NiOOH formed on Ni octahedra exhibits highly enhanced OER durability compared to the Ni cubes, Ni RDs, and the state-of-the-art Ir/C catalysts. KEYWORDS: oxygen evolution reaction, electrocatalyst, nickel oxyhydroxide, heteroepitaxy, phase transformation

O

the issue of crystal phase-dependent OER activity challenge the long-held view, demonstrating that the β-NiOOH is more efficient than γ-NiOOH.34−40 Several experimental results demonstrate a new finding that the layered γ-NiOOH sheets are more active than layered β-NiOOH sheets because of the large population of catalytically active Ni4+.35,41,42 However, calculations imply that the undercoordinated side faces of layered β-NiOOH outperform the fully coordinated faces or even undercoordinated side faces of layered γ-NiOOH as in the original view.28,43−45 While undercoordinated faces of βNiOOH may exhibit a higher OER activity than γ-NiOOH, the β-phase is inevitably converted to the γ-phase during the OER in alkaline media, making β-NiOOH unable to act as the OER catalyst.37−40 Therefore, the prevention of phase alteration and thus maintenance of the layered β-NiOOH structure with undercoordinated side faces remain a great agenda for the development of highly active and durable Nibased electrocatalysts.

xygen evolution reaction (OER) is a crucial anodic halfreaction in aqueous electrolytes that accompanies cathodic electrowinning or hydrogen evolution reaction.1−4 Because the OER is sluggish at high overpotentials, a lot of effort has been made to develop efficient and durable OER catalysts in different pH conditions.5−14 Until recently, IrO2 has been considered as the benchmark catalyst owing to its remarkable performances toward the OER, while with RuO2 remained durability issues.15−17 However, high price and limited supply of Ir have encouraged researchers to explore alternative catalysts that are economically competitive, yet efficient and durable. In an alkaline electrolyte, oxides and hydroxides of transition metals, such as Mn, Fe, Co, and Ni, are suggested as the potential candidates showing attractive OER performances.3,18−21 Among the various metal oxides and hydroxides, βNi(OH)2 has been of great importance as the model OER catalyst because of its high utilization in a rechargeable alkaline battery as a similar system and well-known reversible structural transformation during redox reactions.10,20−32 β-Ni(OH)2 in alkaline media can be electrochemically oxidized to β- and γphases of NiOOH,33 showing a remarkable activity and corrosion resistance toward the OER.34−36 Recent debates on © 2018 American Chemical Society

Received: December 22, 2017 Accepted: March 7, 2018 Published: March 7, 2018 10115

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces

Figure 1. Structural analyses of Ni nanocrystals. HAADF-STEM images and EDS elemental mapping analyses of the Ni (a) octahedra, (b) cubes, and (c) RDs. HRTEM images of the Ni (d) octahedron, (e) cube, and (f) RD and their corresponding FFT patterns of the (i) core, (ii) body, and (iii) shell of the nanocrystal.

the shaping of Ni nanocrystals with nearly pure Ni surfaces. The detailed synthesis of nanocrystals is described in the Experimental Section of the Supporting Information. In the early stage of the growth of the nanocrystals, the difference in decomposition rates of Ni and Pt precursors leads to sequential formation of the Pt core and Ni shell structures. During the ripening, the small amount of the Pt core branched into the Ni shell along the all ⟨100⟩ directions that resulted in nanocrystals with octahedral symmetry (Oh symmetry group for octahedron, cube, and RD). The shape of the Ni octahedron was wellcontrolled in the presence of CO, a selective Ni{111} capping molecule.46−48 In the case of the cube, Ni{100} was stabilized by oleylamine and stearic acid in a sequential introduction of CO and Ar gases.47,49 The shape of RD enclosed by {110} facets was achieved via collaboration of oleylamine, stearic acid, and chlorine under Ar gas.50−52 High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images, energy-dispersive spectroscopy (EDS) elemental mapping, and high-resolution TEM (HRTEM) images and their corresponding fast Fourier transform (FFT) patterns of Ni nanocrystals with different shapes are shown in Figure 1. The average edge lengths of Ni octahedra, cubes, and RDs are 27 ± 4, 26 ± 5, and 20 ± 4 nm (Figure S1), respectively. The EDS mapping images clearly show the segregation of Pt atoms at the core and along the ⟨100⟩ directional axes to the vertices (yellow dots). Nanocrystals are largely composed of Ni (blue dots) with tiny amounts of Pt; 1.2 at. % for octahedron, 0.4 at. % for cube, and 1.1 at. % for RD, as determined by inductively coupled plasma atomic emission spectrometry. Oxygen is also detected at the shell of all the nanocrystals as shown in EDS mapping data (red dots), indicating the surface oxidation of Ni nanocrystals after the synthesis and during the further washing process. Therefore, the distinctively segregated Ni, Pt, and NiO phases are found for all three morphologies of Ni nanocrystals in the HRTEM images. Corresponding FFT patterns reveal the core composed of Ni and Pt, the body of Ni, and the shell of NiO, respectively. With a detailed knowledge of the surface structures and compositions of the present Ni nanocrystals, we evaluated the steady-state OER performances for the activated Ni catalyst

Fast advances in nanocrystal-based catalysis could address the engineering of surface-structural features, such as surface energy, surface atomic arrangement, and catalytically active site. Therefore, the β-phase of the NiOOH might be synthesized via the control of the atom packing motif, namely, the facet on a substrate nanocrystal. However, despite the potential advantage of side faces of layered β-NiOOH-based nanocrystals, experimental examples are utterly rare. Only theoretical studies have been performed, likely because of the lack of synthetic routes to control the facet of β-NiOOH. In this work, we introduce the faceted Ni nanocrystals as the parent substrate for the formation of β-NiOOH with the exposure of undercoordinated faces on the surfaces. Pt impurities are added to the Ni matrix during the synthesis of the faceted Ni nanocrystal, and the segregated Pt atoms at the core to vertices aid the faceting of Ni nanocrystals with the low indexes of {111}, {100}, and {110}.46 As a result, Ni octahedral, cubic, and rhombic dodecahedral nanocrystals have been obtained. The surface oxidation of shape-controlled Ni nanocrystals occurs naturally after the synthesis and the subsequent hydroxylation in a 0.5 M KOH aqueous solution. The conversions of βNi(OH)2 to β-NiOOH and further to γ-NiOOH are observed by applying the electric potential over 1.35 V [vs reversible hydrogen electrode (RHE)] during the OER. Interestingly, the formation of β- or γ-NiOOH on the surface of Ni nanocrystals is facet-dependent. The β-NiOOH was observed on Ni octahedra, whereas the γ-NiOOH was found on Ni cubes and rhombic dodecahedra (RDs). During a long-term OER operation, the surface β-NiOOH on Ni octahedra was maintained while the γ-NiOOH was peeled off from Ni cubes and RDs, resulting in the OER deactivation. The sustainable undercoordinated side faces of layered β-NiOOH on the {111}-faceted Ni octahedra exhibit highly active and durable performances toward the OER compared to the state-of-the-art Ir/C. Typical synthesis of Ni nanocrystals with three different shapes was carried out in solvothermal conditions. Ni nanocrystals with octahedral, cubic, and RD shapes were achieved by introducing different gases during the seed formation and further growth, and minimal use of Pt helped 10116

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces

Figure 2. (a) OER polarization curves measured at a scan rate of 0.02 V s−1 in an O2-saturated 0.5 M KOH solution with a rotation speed of 1600 rpm where the current densities (j) were normalized against the geometric surface area of RDE. (b) OER polarization curves of the Ni octahedra/C catalyst obtained at a scan rate of 0.02 V s−1 before and after the stability test. (c) OER Tafel plots derived from the OER polarization curves of the corresponding catalysts before and after the stability test. (d) OER overpotentials required to achieve the current density of 10 mA cmRDE−2 for the catalysts before and after the stability test.

It should be noted that the value of specific activities is a typical guide for the comparison of catalysts, but it does not present the essential feature of the catalyst. A good catalyst should be stable when OER is continued for a long period of time. Therefore, we conducted a long-term stability of OER for the better evaluation of catalysts.53 We tested chrono− potentiometric stability for the as-obtained Ni catalysts and Ir/C instead of potential cycling to avoid the reduction of electrocatalytically active species.64 The catalysts were held at a constant current density of 10 mA cmRDE−2 at a rotation speed of 1600 rpm in an O2-saturated 0.5 M KOH solution, while the VRHE was measured as a function of time (Figure S5). In this test, the overpotential of Ir/C increased abruptly after 1.5 h, thus we stopped the measurement after 1 h. The ηt=0 for Ir/C was increased from 0.33 to 0.45 V (ηt=1h) at the current density of 10 mA cmRHE−2. The general instability of Ir/C in alkaline OER has been previously reported.53,54,65 In the case of IrO2 in alkaline media, ηt=0 was increased from 0.34 to 0.44 V (ηt=2h) at the current density of 10 mA cmRHE−2. For the Ni catalysts, the chrono−potentiometric test was conducted in a more severe condition of 2 h. The Ni cubes/C showed the lowest ηt=0 of 0.32 V at 10 mA cmRHE−2 among four different catalysts; however, its ηt=2h increased to 0.36 V (Figure S6). In the case of Ni RDs/C, the ηt=0 of 0.36 V increased to ηt=2h of 0.38 V (Figure S7). However, the Ni octahedra/C showed a reversal of trend that the ηt=0 of 0.34 V decreased to ηt=2h of 0.32 V (Figure 2b), revealing sustained and even improved OER activity for a long period of time. TEM images of Ni octahedra/C showed no observable changes in structures during the stability test (Figure S8). The Tafel slopes of Ni octahedra/C (84.8 mV dec−1), Ni cubes/C (71.6 mV dec−1), and Ni RDs/C (93.4 mV dec−1) are smaller than that of Ir/C (109 mV dec−1) (Figure 2c), suggesting that the OER facilitated by Ni catalysts follows a kinetically more efficient pathway than Ir/C. After 2 h of the chrono−potentiometric test (1 h for Ir/C), Tafel plots

supported on carbon (Ni nanocrystals/C, Figure S2). The measurements of OER activity and long-term stability of the three different Ni catalysts were carried out according to the previous literature and compared with the state-of-the-art Ir/C and IrO2 catalysts.53,54 The OER performances of other comparative transition-metal-based catalysts are listed in Table S1.33,55−63 The catalysts were electrochemically cleaned under the potential cycling for 10 times with the scanning rate of 0.10 V s−1 between 0.088 and 1.0 V versus RHE (VRHE) in an Ar-saturated 0.5 M KOH aqueous solution. Then, the cyclic voltammograms (CVs) of the all catalysts were recorded with the same scanning condition. The CO stripping of Ir/C and Ni octahedra/C was also recorded. As shown in Figure S3, the peaks for underpotential deposition of hydrogen (Hupd) and CO oxidation appear for the state-of-the-art Ir/C catalyst, but there are no responses for the Ni catalysts because of the negligible amount of surface Pt. Ni is unresponsive to the Hupd and CO stripping measurements, indicating nearly pure Ni surfaces of as-prepared Ni catalysts. The OER polarization curves of the catalysts were obtained in an O2-saturated 0.5 M KOH solution by using a rotating-disk electrode (RDE) at a rotating speed of 1600 rpm and a scan rate of 0.020 V s−1. Then, the OER polarization curves were normalized with the geometric surface area of RDE, and the resulting geometric current densities at 1.6 VRHE show the trend of catalyst activity as follows: Ni cubes/C > IrO2 > Ni octahedra/C > commercial Ir/C > Ni RDs/C (Figure 2a). Current densities were also normalized with the total mass of metal loading on RDE, and the corresponding mass activities at 1.6 VRHE are 0.5, 0.74, 0.27, 0.58, and 0.41 A mgmetal−1 for Ni octahedra/C, Ni cubes/C, Ni RDs/C, IrO2, and commercial Ir/C (Figure S4), respectively. Ni octahedra/C and Ni cubes/C show enhanced geometry- and mass-based specific OER activities than the state-of-the-art Ir/ C. 10117

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces

of Ni nanocrystals along the oxidation stages by TEM, HRTEM, and X-ray diffraction (XRD). For the formation of β-Ni(OH)2 on the surfaces, the as-obtained Ni nanocrystals were kept in an Ar-saturated 0.5 M KOH solution for 10 h at room temperature. As shown in Figure 4a, the β-Ni(OH)2 shell

(indicated by triangles) in Figure 2c indicate that the Ni octahedra/C showed a decreased value of 75.2 mV dec−1 (Figure 2b). On the contrary, Ni cubes/C, Ni RDs/C, IrO2, and Ir/C showed increase in Tafel slopes of 96.3, 115.8, 82.3, and 124 mV dec−1, respectively, indicating the deactivation of the catalysts over time. With a robust carbon paper electrode (CPE), we conducted the chrono−potentiometric stability test for 24 h. The Ni octahedra/CPE maintained the OER performance over the long term of 24 h, and no sign of catalyst deactivation was observed (Figure S9). The overpotentials at a current density of 10 mA cmRDE−2 were recorded to compare the OER performance before (ηt=0) and after (ηt=x, x = 1, 2 h) the stability test (Figure 2d). An overall graphical comparison of all these catalysts in terms of stability is presented in Figure 3. The abscissa signifies the ηt=0

Figure 3. Overall graphical comparison of the overpotentials of the catalysts at a current density of 10 mA cmRDE−2 before and after the stability test.

Figure 4. Structural analyses of heteroepitaxial β-Ni(OH)2 and βNiOOH phases on the {111}fcc-faceted Ni octahedron. HRTEM images of the Ni octahedron (a) after hydroxylation and (b) after OER stability for 2 h. The insets showing the magnified views of the selected area in HRTEM images and their corresponding FFT patterns with the zone axis of ⟨110⟩fcc. Crystallographic models showing the calculated lattice mismatches of (c) β-Ni(OH)2 and (d) β-NiOOH on {111}fcc-faceted NiO with their projected view along the zone axis of ⟨110⟩fcc and ⟨112⟩fcc. (e) Conceptual perspective model of the Ni@ NiO@β-NiOOH surface structure. (f) Crystallographic model showing the water-intercalated γ-NiOOH on {111}fcc-faceted NiO. Ni and O atoms are colored gray and red, respectively. The {001}hcp facet of β-Ni(OH)2 or β-NiOOH and the {111}fcc facet of NiO are colored green and yellow, respectively.

required to achieve the specific activity of 10 mA cmRDE−2 at the initial stage of OER. The ordinate signifies the ηt=2h required to achieve 10 mA cmRDE−2 after 2 h of stability. The diagonal dashed line is the projected response for a stable catalyst; catalysts with plots above the line show the deactivation (or passivation) over time. Highly active and durable catalyst can be positioned at lower overpotential and below the line. We conclude that the trend of catalytic stability of the following catalysts in terms of overpotential is Ni octahedra/C > Ni cubes/C > Ni RDs/C > IrO2 > Ir/C. The anodic onset potential observed at 1.35 VRHE and the adjacent peak for Ni octahedra/C, observed in the inset of Figure 2a, correspond to the electrochemical oxidation of βNi(OH)2 to β-NiOOH, as confirmed from previous surfaceenhanced Raman scattering and X-ray photoelectron spectroscopy (XPS) studies.22,64 An increase in the applied potential may result in the further oxidation of overcharging β-NiOOH to γ-NiOOH.64 Therefore, the formation and further exfoliation of γ-NiOOH during the stability test for Ni cubes/C and Ni RDs/C lead to an increase of OER overpotentials and thus the deactivation of catalysts. However, on the basis of the observations of electrocatalyst stability, the {111} facet of Ni octahedra/C may prevent the β- to γ-phase transformation of NiOOH during the harsh stability test for 2 h. This phenomenon indicates the surface passivation and even the formation of more electroactive surfaces such as undercoordinated side faces of layered β-NiOOH during the stability test.66 In parallel with the electrochemistry study, we performed the mechanism study to track the changes of the surface structure

of a hexagonal close-packed (hcp) structure was formed on the {111}-faceted face-centered cubic (fcc) NiO/Ni octahedron. A crystallographic model of Figure 4c indicates that slight lattice mismatches of −9.9% along ⟨001⟩hcp with the ⟨112⟩fcc direction and 6.0% along ⟨100⟩ hcp with the ⟨110⟩ fcc direction, respectively, between {100}hcp of β-Ni(OH)2 and {111}fcc of NiO/Ni octahedron resulted in epitaxial growth and exposure of side faces of layered β-Ni(OH)2, as shown by the HRTEM image in the inset of Figure 4a. However, the large lattice mismatch of 56.1% along ⟨001⟩hcp with ⟨110⟩fcc between {100}hcp of β-Ni(OH)2 and {100}fcc of NiO/Ni cubes resulted in a poor epitaxial interaction (Table S2). The lattice mismatch of {100}hcp of β-Ni(OH)2 with {110}fcc of NiO/Ni RD (10.4% along ⟨001⟩hcp with ⟨100⟩fcc) surfaces is larger than that with {111}fcc of octahedra. In addition, an atomic model of β-Ni(OH)2 formed on a rock salt NiO ionic crystal suggests an ionic repulsion on the surfaces of Ni nanocrystals. The {111}fcc facet of rock salt NiO 10118

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces

{111}fcc facet of NiO, the β- to γ-phase transformation could be greatly hindered because of the greatly increased lattice mismatch from −5.4 to 40% along ⟨001⟩hcp with the ⟨112⟩fcc direction during the expansion of the interlayers (Figure 4d−f). Therefore, the well-aligned interfaces derive not only the formation of OER active undercoordinated {100}hcp facets of layered β-Ni(OH)2 but also the prevention of the further oxidation to γ-NiOOH. On the basis of the HRTEM images and the crystallographic model, we built the conceptual surface of the β-NiOOH/NiO{111}fcc/Ni octahedron for the active and durable OER model catalyst, as shown in Figure 4e. This illustrates the well-aligned crystal layers of β-NiOOH on the surface of NiO and exposed undercoordinated {100}hcp facets. Our finding supports the long-held view and the density functional theoretical study that the side facets of layered βNiOOH, which have undercoordinated metal sites, are more active for the OER than the fully coordinated {001}hcp facet of γ-NiOOH.28,44,45,70 Figures 6 and S11 show XRD patterns of the Ni nanocrystals at different oxidation conditions. As-prepared Ni nanocrystals

exposes Ni2+ ions on its top layer, and therefore, the O2− from the {100}hcp-faceted β-Ni(OH)2 can bind strongly to the NiO, as shown in Figure 5a. Therefore, the small lattice mismatch at

Figure 5. Atomic models of β-Ni(OH)2 on (a) {111}fcc, (b) {100}fcc, and (c) {110}fcc facets of NiO with the zone axis of ⟨110⟩fcc. Ni and O atoms are colored white and red, respectively. Attractive and repulsive interactions between Ni and O atoms are represented with white dashed lines and yellow arrows, respectively. TEM images of surface hydroxylated Ni (d) octahedra, (e) cubes, and (f) RDs in 0.5 M KOH solutions for 10 h at room temperature.

the epitaxial junction of the Ni octahedron is expected to be ignored, leading to a sustainable surface β-Ni(OH)2. In contrast, Ni2+ and O2− ions are alternately placed on the top layers of {100}fcc- and {110}fcc-faceted NiO. Therefore, the lattice mismatch for Ni cubes and RDs can induce repulsive interactions of O2− ions between NiO and β-Ni(OH)2 (Figure 5b,c).67−69 As a result, significant exfoliation of the β-Ni(OH)2 sheets can be observed for both the Ni cubes and RDs after 10 h of treatment in alkaline media because of the lattice mismatch and the ionic repulsion (Figure 5e,f), but not for the Ni octahedra (Figure 5d). We propose that the synergy between the level of surface lattice mismatch and ionic repulsion is the determining factor for the alkaline OER stability of Ni nanocrystals. To understand the facet-dependent OER stability, the electrochemical oxidation of β-Ni(OH)2 to β-NiOOH and further oxidation to γ-NiOOH on the Ni nanocrystals was accomplished by applying the oxidative potential of 1.35 VRHE for 2 h in alkaline media. The exfoliated β-Ni(OH)2 sheets on the surfaces of Ni cubes and RDs could be easily oxidized to β-NiOOH and to γNiOOH. Finally, the exfoliation of γ-NiOOH is observed for the Ni cubes and RDs (Figure S10). TEM and HRTEM images of the surface of Ni octahedra exhibit only the β-NiOOH shell; neither the formation nor further exfoliation of γ-NiOOH was observed (Figures 4b and S10). A crystallographic model of Figure 4d reveals the reduced lattice mismatch (−5.4% along ⟨100⟩hcp with ⟨112⟩fcc direction) between the {100}hcp βNiOOH and its sublayer of {111}fcc NiO (Table S2). The oxidation of β- to γ-NiOOH requires a dramatic change of the interlayer distance from 4.8 to 7.0 Å along the c-axis. On the

Figure 6. Magnified XRD spectra of the Ni nanocrystals with different shapes (a) of a fresh condition, (b) after 10 h of hydroxylation in 0.5 M KOH solutions, and after (c) 2 and (d) 24 h of the OER stability test in 0.5 M KOH solutions. References: Ni (PDF#00-004-0850), NiO (PDF#00-004-0835), β-Ni(OH)2 (PDF#00-014-0117), βNiOOH (PDF#00-006-0141), and γ-NiOOH (PDF#00-006-0075).

exhibit a dominant Ni phase pattern with the minute NiO diffractions in Figures 6a and S11a. After 10 h of hydroxylation in an 0.5 M KOH solution, significant diffractions of βNi(OH)2 are observed (Figure 6b). Then, the diffractions of βNi(OH)2 disappeared after 2 h of OER, but the characteristic diffractions with 7 Å of γ-NiOOH undoubtedly appeared for the Ni cubes and RDs, except for the Ni octahedra (Figure 6c). The thin-layered β-NiOOH shell on the Ni octahedra might be hardly identified by XRD because of its small crystallite size. Surprisingly, the phase transformation of β- to γ-NiOOH was distinctively suppressed on the surfaces of Ni octahedra even in a more severe condition of 24 h of OER (Figure 6d). XPS was performed for catalysts before and after the OER experiment. As shown in Figure S12, the surface of the Ni nanocrystals after 10119

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces OER is composed of Ni, NiO, Ni(OH)2, β-, and γ-NiOOH. Overall, the Ni metal in the surface was transformed to more oxidized forms, and some fraction of Ni(II) species was further oxidized to Ni(III) species during the OER. All observations from the XRD and XPS measurement support the phase transformation during the overall oxidation stages and provide the characterization of the sustainable surface β-NiOOH on Ni octahedra. In summary, the synthesis of the highly active and durable βNiOOH nanocatalyst was achieved by obtaining the shapecontrolled Ni octahedra and the subsequent hydroxylation and oxidation in an Ar-saturated 0.5 M KOH solution. The crystal structure modeling showed that the {111}fcc facet of NiO/Ni has a well-suited characteristic ionic heteroepitaxy to the {100}hcp facet of β-NiOOH. Experimental results showed that the {100}hcp-faceted β-NiOOH was maintained on the surface of the Ni octahedra and was not oxidized to γ-NiOOH during the OER. However, the β- to γ-NiOOH transformation and thus the surface exfoliation resulted in the deactivation of Ni cubes and RDs toward the long-term OER. Electrochemical measurements revealed that surface β-NiOOH-modified Ni octahedra/C exhibited the prominent OER activity and durability that outperform those of the state-of-the-art Ir/C catalyst. We believe that the findings in this work would offer great opportunities for understanding and approaching the fabrication of layered metal(oxy)hydroxides with desired reactive surfaces as the highly active and durable alkaline OER catalyst.



Korea Basic Science Institute (KBSI) for the usage of their HRTEM instrument.



(1) Mills, A. Heterogeneous Redox Catalysts for Oxygen and Chlorine Evolution. Chem. Soc. Rev. 1989, 18, 285−316. (2) Yagi, M.; Kaneko, M. Molecular Catalysts for Water Oxidation. Chem. Rev. 2001, 101, 21−36. (3) Kanan, M. W.; Nocera, D. G. In situ Formation of an OxygenEvolving Catalyst in Neutral Water Containing Phosphate and Co2+. Science 2008, 321, 1072−1075. (4) Suen, N.-T.; Hung, S.-F.; Quan, Q.; Zhang, N.; Xu, Y.-J.; Chen, H. M. Electrocatalysis for the Oxygen Evolution Reaction: Recent Development and Future Perspectives. Chem. Soc. Rev. 2017, 46, 337− 365. (5) Smith, A. M.; Trotochaud, L.; Burke, M. S.; Boettcher, S. W. Contributions to Activity Enhancement via Fe Incorporation in Ni(oxy)hydroxide/borate Catalysts for Near-Neutral pH Oxygen Evolution. Chem. Commun. 2015, 51, 5261−5263. (6) Giordano, L.; Han, B.; Risch, M.; Hong, W. T.; Rao, R. R.; Stoerzinger, K. A.; Shao-Horn, Y. pH Dependence of OER Activity of Oxides: Current and Future Perspectives. Catal. Today 2016, 262, 2− 10. (7) Kwon, T.; Hwang, H.; Sa, Y. J.; Park, J.; Baik, H.; Joo, S. H.; Lee, K. Cobalt Assisted Synthesis of IrCu Hollow Octahedral Nanocages as Highly Active Electrocatalysts toward Oxygen Evolution Reaction. Adv. Funct. Mater. 2017, 27, 1604688. (8) Park, J.; Sa, Y. J.; Baik, H.; Kwon, T.; Joo, S. H.; Lee, K. IridiumBased Multimetallic Nanoframe@Nanoframe Structure: An Efficient and Robust Electrocatalyst toward Oxygen Evolution Reaction. ACS Nano 2017, 11, 5500−5509. (9) Seitz, L. C.; Dickens, C. F.; Nishio, K.; Hikita, Y.; Montoya, J.; Doyle, A.; Kirk, C.; Vojvodic, A.; Hwang, H. Y.; Norskov, J. K.; Jaramillo, T. F. A Highly Active and Stable IrOx/SrIrO3 Catalyst for the Oxygen Evolution Reaction. Science 2016, 353, 1011−1014. (10) Dionigi, F.; Strasser, P. NiFe-Based (Oxy)hydroxide Catalysts for Oxygen Evolution Reaction in Non-Acidic Electrolytes. Adv. Eng. Mater. 2016, 6, 1600621. (11) Jin, H.; Hong, Y.; Yoon, J.; Oh, A.; Chaudhari, N. K.; Baik, H.; Joo, S. H.; Lee, K. Lanthanide Metal-Assisted Synthesis of Rhombic Dodecahedral MNi (M=Ir and Pt) Nanoframes toward Efficient Oxygen Evolution Catalysis. Nano Energy 2017, 42, 17−25. (12) Xie, L.; Zhang, R.; Cui, L.; Liu, D.; Hao, S.; Ma, Y.; Du, G.; Asiri, A. M.; Sun, X. High-Performance Electrolytic Oxygen Evolution in Neutral Media Catalyzed by a Cobalt Phosphate Nanoarray. Angew. Chem. 2017, 129, 1084−1088. (13) Cui, L.; Liu, D.; Hao, S.; Qu, F.; Du, G.; Liu, J.; Asiri, A.; Sun, X. In situ Electrochemical Surface Derivation of Cobalt Phosphate from a Co(CO3)0.5(OH)0.11H2O Nanoarray for Efficient Water Oxidation in Neutral Aqueous Solution. Nanoscale 2017, 9, 3752−3756. (14) Foruzin, L. J.; Rezvani, Z.; Shishavan, Y. H.; Habibi, B. Ni2Zn0.5Fe-LDH modified Carbon Paste Electrodes as an Efficient Electrocatalyst for Water Oxidation in Neutral Media. Int. J. Hydrogen Energy 2018, 43, 150−160. (15) Kötz, R.; Lewerenz, H.; Stucki, S. XPS Studies of Oxygen Evolution on Ru and RuO2 Anodes. J. Electrochem. Soc. 1983, 130, 825. (16) Kötz, R.; Neff, H.; Stucki, S. Anodic Iridium Oxide Films XPSStudies of Oxidation State Changes and O2-Evolution. J. Electrochem. Soc. 1984, 131, 72−77. (17) Antolini, E. Iridium as Catalyst and Cocatalyst for Oxygen Evolution/Reduction in Acidic Polymer Electrolyte Membrane Electrolyzers and Fuel Cells. ACS Catal. 2014, 4, 1426−1440. (18) Zhang, M.; De Respinis, M.; Frei, H. Time-Resolved Observations of Water Oxidation Intermediates on a Cobalt Oxide Nanoparticle Catalyst. Nat. Chem. 2014, 6, 362−367. (19) Risch, M.; Ringleb, F.; Kohlhoff, M.; Bogdanoff, P.; Chernev, P.; Zaharieva, I.; Dau, H. Water Oxidation by Amorphous Cobalt-Based Oxides: In situ Tracking of Redox Transitions and Mode of Catalysis. Energy Environ. Sci. 2015, 8, 661−674.

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsami.7b19457. Experimental details, TEM images, CVs, OER polarization curves, chrono−potentiometric curves, table for the lattice mismatch (PDF)



REFERENCES

AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected] (S.-I.C.). *E-mail: [email protected] (K.L.). ORCID

Byeongyoon Kim: 0000-0001-8399-727X Aram Oh: 0000-0001-5232-4187 Mrinal Kanti Kabiraz: 0000-0002-3603-7329 Youngmin Hong: 0000-0003-1480-1012 Jinwhan Joo: 0000-0001-5614-8790 Hionsuck Baik: 0000-0002-5745-4404 Sang-Il Choi: 0000-0002-8280-3100 Kwangyeol Lee: 0000-0003-0575-7216 Author Contributions ⊥

B.K., A.O., and M.K.K. contributed equally.

Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS This work was supported by National Research Foundation of Korea grants (NRF-2017-R1A2B3005682 and NRF2016H1D5A1910726, NRF-2017-R1A6A3A01008861), IBSR023-D1, and KBSI Project E37300. The authors thank 10120

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces

Alkaline Solution. Part 1-Nickel. Int. J. Electrochem. Sci. 2008, 3, 1386− 1424. (41) Bediako, D. K.; Lassalle-Kaiser, B.; Surendranath, Y.; Yano, J.; Yachandra, V. K.; Nocera, D. G. Structure−Activity Correlations in a Nickel−Borate Oxygen Evolution Catalyst. J. Am. Chem. Soc. 2012, 134, 6801−6809. (42) Trotochaud, L.; Young, S. L.; Ranney, J. K.; Boettcher, S. W. Nickel−Iron Oxyhydroxide Oxygen-Evolution Electrocatalysts: the Role of Intentional and Incidental Iron Incorporation. J. Am. Chem. Soc. 2014, 136, 6744−6753. (43) Fidelsky, V.; Toroker, M. C. Engineering Band Edge Positions of Nickel Oxyhydroxide through Facet Selection. J. Phys. Chem. C 2016, 120, 8104−8108. (44) Bajdich, M.; García-Mota, M.; Vojvodic, A.; Nørskov, J. K.; Bell, A. T. Theoretical Investigation of the Activity of Cobalt Oxides for the Electrochemical Oxidation of Water. J. Am. Chem. Soc. 2013, 135, 13521−13530. (45) Friebel, D.; Louie, M. W.; Bajdich, M.; Sanwald, K. E.; Cai, Y.; Wise, A. M.; Cheng, M.-J.; Sokaras, D.; Weng, T.-C.; Alonso-Mori, R. Identification of Highly Active Fe Sites in (Ni, Fe)OOH for Electrocatalytic Water Splitting. J. Am. Chem. Soc. 2015, 137, 1305− 1313. (46) Oh, A.; Baik, H.; Choi, D. S.; Cheon, J. Y.; Kim, B.; Kim, H.; Kwon, S. J.; Joo, S. H.; Jung, Y.; Lee, K. Skeletal Octahedral Nanoframe with Cartesian Coordinates via Geometrically Precise Nanoscale Phase Segregation in a Pt@ Ni Core−Shell Nanocrystal. ACS Nano 2015, 9, 2856−2867. (47) Zhang, J.; Yang, H.; Fang, J.; Zou, S. Synthesis and Oxygen Reduction Activity of Shape-Controlled Pt3Ni Nanopolyhedra. Nano Lett. 2010, 10, 638−644. (48) Choi, S.-I.; Xie, S.; Shao, M.; Odell, J. H.; Lu, N.; Peng, H.-C.; Protsailo, L.; Guerrero, S.; Park, J.; Xia, X.; Wang, J.; Kim, M. J.; Xia, Y. Synthesis and Characterization of 9 nm Pt−Ni Octahedra with a Record High Activity of 3.3 A/mgPt for the Oxygen Reduction Reaction. Nano Lett. 2013, 13, 3420−3425. (49) Wang, C.; Daimon, H.; Lee, Y.; Kim, J.; Sun, S. Synthesis of Monodisperse Pt Nanocubes and Their Enhanced Catalysis for Oxygen Reduction. J. Am. Chem. Soc. 2007, 129, 6974−6975. (50) Chen, C.; Kang, Y.; Huo, Z.; Zhu, Z.; Huang, W.; Xin, H. L.; Snyder, J. D.; Li, D.; Herron, J. A.; Mavrikakis, M.; Chi, M.; More, K. L.; Li, Y.; Markovic, N. M.; Somorjai, G. A.; Yang, P.; Stamenkovic, V. R. Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces. Science 2014, 343, 1339−1343. (51) Niu, Z.; Becknell, N.; Yu, Y.; Kim, D.; Chen, C.; Kornienko, N.; Somorjai, G. A.; Yang, P. Anisotropic Phase Segregation and Migration of Pt in Nanocrystals en Route to Nanoframe Catalysts. Nat. Mater. 2016, 15, 1188−1194. (52) Becknell, N.; Son, Y.; Kim, D.; Li, D.; Yu, Y.; Niu, Z.; Lei, T.; Sneed, B. T.; More, K. L.; Markovic, N. M.; Stamenkovic, V. R.; Yang, P. Control of Architecture in Rhombic Dodecahedral Pt−Ni Nanoframe Electrocatalysts. J. Am. Chem. Soc. 2017, 139, 11678− 11681. (53) McCrory, C. C. L.; Jung, S.; Peters, J. C.; Jaramillo, T. F. Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction. J. Am. Chem. Soc. 2013, 135, 16977−16987. (54) Lee, J. G.; Hwang, J.; Hwang, H. J.; Jeon, O. S.; Jang, J.; Kwon, O.; Lee, Y.; Han, B.; Shul, Y.-G. A New Family of Perovskite Catalysts for Oxygen-Evolution Reaction in Alkaline Media: BaNiO3 and BaNi0.83O2.5. J. Am. Chem. Soc. 2016, 138, 3541−3547. (55) Subbaraman, R.; Tripkovic, D.; Chang, K.-C.; Strmcnik, D.; Paulikas, A. P.; Hirunsit, P.; Chan, M.; Greeley, J.; Stamenkovic, V.; Markovic, N. M. Trends in Activity for the Water Electrolyser Reactions on 3d M (Ni, Co, Fe, Mn) Hydr(oxy)oxide Catalysts. Nat. Mater. 2012, 11, 550−557. (56) Song, F.; Hu, X. Exfoliation of Layered Double Hydroxides for Enhanced Oxygen Evolution Catalysis. Nat. Commun. 2014, 5, 4477. (57) Long, X.; Li, J.; Xiao, S.; Yan, K.; Wang, Z.; Chen, H.; Yang, S. A Strongly Coupled Graphene and FeNi Double Hydroxide Hybrid as

(20) Burke, M. S.; Enman, L. J.; Batchellor, A. S.; Zou, S.; Boettcher, S. W. Oxygen Evolution Reaction Electrocatalysis on Transition Metal Oxides and (oxy)hydroxides: Activity Trends and Design Principles. Chem. Mater. 2015, 27, 7549−7558. (21) Goldsmith, Z. K.; Harshan, A. K.; Gerken, J. B.; Vörös, M.; Galli, G.; Stahl, S. S.; Hammes-Schiffer, S. Characterization of NiFe Oxyhydroxide Electrocatalysts by Integrated Electronic Structure Calculations and Spectroelectrochemistry. Proc. Natl. Acad. Sci. U.S.A. 2017, 114, 3050−3055. (22) Diaz-Morales, O.; Ferrus-Suspedra, D.; Koper, M. T. M. The Importance of Nickel Oxyhydroxide Deprotonation on its Activity Towards Electrochemical Water Oxidation. Chem. Sci. 2016, 7, 2639− 2645. (23) Zou, S.; Burke, M. S.; Kast, M. G.; Fan, J.; Danilovic, N.; Boettcher, S. W. Fe (Oxy)hydroxide Oxygen Evolution Reaction Electrocatalysis: Intrinsic Activity and the Roles of Electrical Conductivity, Substrate, and Dissolution. Chem. Mater. 2015, 27, 8011−8020. (24) Corrigan, D. A.; Knight, S. L. Electrochemical and Spectroscopic Evidence on the Participation of Quadrivalent Nickel in the Nickel Hydroxide Redox Reaction. J. Electrochem. Soc. 1989, 136, 613. (25) Amine, K.; Tukamoto, H.; Yasuda, H.; Fujita, Y. A New ThreeVolt Spinel Li1+x Mn1.5Ni0.5 O4 for Secondary Lithium Batteries. J. Electrochem. Soc. 1996, 143, 1607. (26) Ovshinsky, S. R.; Fetcenko, M. A.; Ross, J. A Nickel Metal Hydride Battery for Electric Vehicles. Science 1993, 260, 176−181. (27) Zaffran, J.; Toroker, M. C. Metal-Oxygen Bond Ionicity as an Efficient Descriptor for Doped NiOOH Photocatalytic Activity. ChemPhysChem 2016, 17, 1630−1636. (28) Li, Y.-F.; Selloni, A. Mechanism and Activity of Water Oxidation on Selected Surfaces of Pure and Fe-doped NiOx. ACS Catal. 2014, 4, 1148−1153. (29) Tkalych, A. J.; Yu, K.; Carter, E. A. Structural and Electronic Features of β-Ni (OH)2 and β-NiOOH from First Principles. J. Phys. Chem. C 2015, 119, 24315−24322. (30) Hu, C.-W.; Yamada, Y.; Yoshimura, K. Fabrication of Nickel Oxyhydroxide/Palladium (NiOOH/Pd) Thin Films for Gasochromic Application. J. Mater. Chem. C 2016, 4, 5390−5397. (31) Zaffran, J.; Toroker, M. C. Designing Efficient Doped NiOOH Catalysts for Water Splitting with First Principles Calculations. ChemistrySelect 2016, 1, 911−916. (32) Enman, L. J.; Burke, M. S.; Batchellor, A. S.; Boettcher, S. W. Effects of Intentionally Incorporated Metal Cations on the Oxygen Evolution Electrocatalytic Activity of Nickel (Oxy)hydroxide in Alkaline Media. ACS Catal. 2016, 6, 2416−2423. (33) Yeo, B. S.; Bell, A. T. In Situ Raman Study of Nickel Oxide and Gold-Supported Nickel Oxide Catalysts for the Electrochemical Evolution of Oxygen. J. Phys. Chem. C 2012, 116, 8394−8400. (34) Van der Ven, A.; Morgan, D.; Meng, Y.; Ceder, G. Phase Stability of Nickel Hydroxides and Oxyhydroxides. J. Electrochem. Soc. 2006, 153, A210−A215. (35) Gao, M.; Sheng, W.; Zhuang, Z.; Fang, Q.; Gu, S.; Jiang, J.; Yan, Y. Efficient Water Oxidation Using Nanostructured α-NickelHydroxide as an Electrocatalyst. J. Am. Chem. Soc. 2014, 136, 7077− 7084. (36) Fabbri, E.; Habereder, A.; Waltar, K.; Kötz, R.; Schmidt, T. J. Developments and Perspectives of Oxide-based Catalysts for the Oxygen Evolution Reaction. Catal. Sci. Technol. 2014, 4, 3800−3821. (37) Bode, H.; Dehmelt, K.; Witte, J. Zur Kenntnis der Nickelhydroxidelektrode-I. Ü ber das Nickel (II)-Hydroxidhydrat. Electrochim. Acta 1966, 11, 1079−1087. (38) Lu, P.; Srinivasan, S. Electrochemical-Ellipsometric Studies of Oxide Film Formed on Nickel during Oxygen Evolution. J. Electrochem. Soc. 1978, 125, 1416−1422. (39) Cappadonia, M.; Divisek, J.; von der Heyden, T.; Stimming, U. Oxygen Evolution at Nickel Anodes in Concentrated Alkaline Solution. Electrochim. Acta 1994, 39, 1559−1564. (40) Lyons, M. E.; Brandon, M. P. The Oxygen Evolution Reaction on Passive Oxide Covered Transition Metal Electrodes in Aqueous 10121

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122

Research Article

ACS Applied Materials & Interfaces an Excellent Electrocatalyst for the Oxygen Evolution Reaction. Angew. Chem., Int. Ed. 2014, 53, 7584−7588. (58) Diaz-Morales, O.; Ledezma-Yanez, I.; Koper, M. T. M.; CalleVallejo, F. Guidelines for the Rational Design of Ni-Based Double Hydroxide Electrocatalysts for the Oxygen Evolution Reaction. ACS Catal. 2015, 5, 5380−5387. (59) Li, M.; Xiong, Y.; Liu, X.; Bo, X.; Zhang, Y.; Han, C.; Guo, L. Facile Synthesis of Electrospun MFe2O4 (M = Co, Ni, Cu, Mn) Spinel Nanofibers With Excellent Electrocatalytic Properties for Oxygen Evolution and Hydrogen Peroxide Reduction. Nanoscale 2015, 7, 8920−8930. (60) Al-Hoshan, M. S.; Singh, J. P.; Al-Mayouf, A. M.; Al-Suhybani, A. A.; Shaddad, M. N. Synthesis, Physicochemical and Electrochemical Properties of Nickel Ferrite Spinels Obtained by Hydrothermal Method for the Oxygen Evolution Reaction (OER). Int. J. Electrochem. Sci. 2012, 7, 4959−4973. (61) Hirai, S.; Yagi, S.; Seno, A.; Fujioka, M.; Ohno, T.; Matsuda, T. Enhancement of the Oxygen Evolution Reaction in Mn3+-Based Electrocatalysts: Correlation Between Jahn−Teller Distortion and Catalytic Activity. RSC Adv. 2016, 6, 2019−2023. (62) Yagi, S.; Yamada, I.; Tsukasaki, H.; Seno, A.; Murakami, M.; Fujii, H.; Chen, H.; Umezawa, N.; Abe, H.; Nishiyama, N.; Mori, S. Covalency-Reinforced Oxygen Evolution Reaction Catalyst. Nat. Commun. 2015, 6, 8249. (63) Matsumoto, Y. Oxygen Evolution on La1 − xSrxFe1 − yCoyO3 Series Oxides. J. Electrochem. Soc. 1980, 127, 2360−2364. (64) Hall, D. S.; Bock, C.; MacDougall, B. R. The Electrochemistry of Metallic Nickel: Oxides, Hydroxides, Hydrides and Alkaline Hydrogen Evolution. J. Electrochem. Soc. 2013, 160, F235−F243. (65) Gong, M.; Li, Y.; Wang, H.; Liang, Y.; Wu, J. Z.; Zhou, J.; Wang, J.; Regier, T.; Wei, F.; Dai, H. An Advanced Ni−Fe Layered Double Hydroxide Electrocatalyst for Water Oxidation. J. Am. Chem. Soc. 2013, 135, 8452−8455. (66) Ryu, J.; Jung, N.; Jang, J. H.; Kim, H.-J.; Yoo, S. J. In Situ Transformation of Hydrogen-Evolving CoP Nanoparticles: Toward Efficient Oxygen Evolution Catalysts Bearing Dispersed Morphologies With Co-Oxo/Hydroxo Molecular Units. ACS Catal. 2015, 5, 4066− 4074. (67) Callen, H. B. Electric Breakdown in Ionic Crystals. Phys. Rev. 1949, 76, 1394−1402. (68) Varley, J. H. O. A Mechanism for the Displacement of Ions in an Ionic Lattice. Nature 1954, 174, 886−887. (69) Johnston, T. L.; Stokes, R. J.; Li, C. H. The Ductile-Brittle Transition in Ionic Solids. Philos. Mag. 1959, 4, 1316−1324. (70) Fidelsky, V.; Toroker, M. C. Engineering Band Edge Positions of Nickel Oxyhydroxide Through Facet Selection. J. Phys. Chem. C 2016, 120, 8104−8108.

10122

DOI: 10.1021/acsami.7b19457 ACS Appl. Mater. Interfaces 2018, 10, 10115−10122