Oxide on Graphitic ... - ACS Publications

Dec 6, 2016 - Curtin University, GPO Box U1987, Bentley, Western Australia 6102, ... and utilize more visible light, flower-like cobalt hydroxide/oxid...
0 downloads 0 Views 2MB Size
Subscriber access provided by UB + Fachbibliothek Chemie | (FU-Bibliothekssystem)

Article

Flower-Like Cobalt Hydroxide/Oxide on Graphitic Carbon Nitride for Visible-Light-Driven Water Oxidation Huayang Zhang, Wenjie Tian, Xiaochen Guo, Li Zhou, Hongqi Sun, Moses O. Tade, and Shaobin Wang ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b10918 • Publication Date (Web): 06 Dec 2016 Downloaded from http://pubs.acs.org on December 7, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Flower-Like Cobalt Hydroxide/Oxide on Graphitic Carbon Nitride for Visible-Light-Driven Water Oxidation Huayang Zhang a, Wenjie Tian a, Xiaochen Guo a, Li Zhou a, Hongqi Sun b*, Moses O. Tadé a and Shaobin Wang a* a

Department of Chemical Engineering and CRC for Contamination Assessment and

Remediation of the Environment (CRC CARE), Curtin University, GPO Box U1987, Western Australia, Australia b

School of Engineering, Edith Cowan University, 270 Joondalup Drive, Joondalup, WA 6027, Australia

ABSTRACT Direct water oxidation via photocatalysis is a four-electron and multiple-proton process which requires high extra energy input to produce free dioxygen gas, making it exacting especially under visible light irradiation. To improve the oxygen evolution reaction rates (OERs) and utilize more visible light, flower-like cobalt hydroxide/oxide (Fw-Co(OH)2/Fw-Co3O4) photocatalysts are prepared and loaded onto graphitic carbon nitride (g-C3N4) by a facile coating method in this work. Influenced by the unique three-dimensional (3D) morphologies, the synthesized FwCo(OH)2 or Fw-Co3O4/g-C3N4 hybrids reveal favorable combination and synergism, reflected by the modified photoelectric activities and the improved OER performances. Attributed by its prominent hydrotalcite structure, Fw-Co(OH)2 shows better cocatalytic activity for g-C3N4 modification compared with Fw-Co3O4. Specifically, 7 wt.% Fw-Co(OH)2/g-C3N4 photocatalyst exhibits 4 times higher photocurrent density and 5 times better OER performance than pristine g-

1 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

C3N4. This work unambiguously promotes the application of sustainable g-C3N4 in water oxidation.

KEYWORDS: g-C3N4, cobalt hydroxide, cobalt oxide, cocatalysts, water oxidation

1. INTRODUCTION Using renewable energy sources to split water into oxygen and hydrogen for replacing fossil fuels could be a boon to earthlings. Especially, the generation of oxygen by water oxidation is regarded as a more tough step in water splitting, because it relates to a four-electron and multiple-proton procedure. Over the years, gratifying achievements have been made and high quantum efficiency has been achieved by employing semiconductor catalysts in the area of water splitting under UV irradiations.1-4 However, the activity of water oxidation under visible light, which occupies the majority of solar spectrum energy, is still far from satisfactory when merely using traditional semiconductor catalysts such as TiO2.5 Interestingly, g-C3N4 which is a newly developed photocatalyst has demonstrated great potential in visible-light-driven photocatalysis.610

Compared with other wide band-gap semiconductor materials, the unique band structure

enables g-C3N4 to absorb more visible light.11 In addition, the metal-free nature and facile synthesis endow g-C3N4 with the advantages of sustainability and environmental geniality, making it promising for a large-scale application. From chemical thermodynamics, the valence band position of g-C3N4 is more positive than oxygen evolution potential, yet the activity is not satisfactory due to imperfect charge separation ability.12-13 For this reason, modification of gC3N4 to make it a more competitive light-harvesting platform for water oxidation has attracted much attention.14-16 Various modification strategies on g-C3N4 have been performed, such as textural engineering, co-polymerization, doping, cocatalyst deposition, heterostructure design, 2 ACS Paragon Plus Environment

Page 2 of 25

Page 3 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

and thin-film fabrication.11, 17-23 Among them, deposition of efficient cocatalysts onto g-C3N4 has been proved to be a feasible and effective measure to finally obtain a better water oxidation performance. These cocatalysts can provide effective catalytic sites with lower overpotentials for water oxidation, and can also serve as selective trapping sites for photogenerated electrons, and thus restraining recombination of charge carriers.24-26

Various cocatalysts including transition-metal-based materials (such as MnOx, NiO, Fe2O3, Co3O4),27-32 organometallic complexes, bimetallic and polyoxometalate-based oxides (such as NiFe2O4, NiCo2O4) have been studied at the frontier of this field.33-36 Among various cocatalysts, interest in earth-abundant cobalt has been stimulated along with a surge towards solar energy utilization. Moreover, it was found that the selectivity to oxygen evolution using cobalt hydroxides were more competitive than other metallic hydroxides (like Fe(OH)3, Ni(OH)2).37 Therefore, we aim to develop an effective cobalt-based cocatalysts for g-C3N4 in this work.

In order to combine effectively, impregnating, adsorbing, or coating the cocatalysts onto the framework of semiconductor photocatalysts are the common methods.5, 15-16, 34, 38-39 For example, Maeda et al. 5 recently reported that after hybridizing Co(OH)2 with TiO2 using the impregnation method, an improved water oxidation effect was observed. Inspired by them, herein we report a facile coating approach to load shape-controlled cobalt hydroxides/oxides onto g-C3N4 nanosheets to achieve water catalytic oxidation on g-C3N4. The synthesized cobalt hydroxide and oxide showed three-dimensional flower-like morphologies and well-defined combination with gC3N4. The composites displayed an improved catalytic activity for OER under visible light irradiations.

3 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

2. EXPERIMENTAL SECTION 2.1. Chemical Reagents. Cobalt (II) nitrate hexahydrate, cobalt (II) acetate tetrahydrate, urea, methanol, polyvinylpyrrolidone (PVP, K30), 5,5-dimethyl-1-pyrroline Noxide (DMPO; ≥97.0%) were purchased from Sigma-Aldrich. All the chemicals were of analytical grade and employed as received without further purification.

2.2. Materials preparation. Preparation of g-C3N4: g-C3N4 photocatalyst was prepared by a thermal polymerization method. In a typical route, 5 g of urea was annealed at 550 °C for 2 h in air. The final light yellow powder was then gathered and denoted as g-C3N4. Preparation of FwCo(OH)2/g-C3N4 (Scheme S1): Flower-like Co(OH)2 was synthesized by a modified hydrothermal method firstly.40 Typically, 0.498 g of Co(CH3COO)2·4H2O, 0.24 g of urea and 0.5 g of polyvinylpyrrolidone (PVP, K30) were firstly dissolved in methanol before ultrasonication and mixing. Then 40 mL of the aqueous solutions were infused into a 120 mL Teflon-liner with a stainless steel autoclave and subsequently sealed for heating at 200 °C for 6 h in an oven. After centrifugation and washing the possible residual urea and PVP with water and ethanol for several times, the resulting product was obtained as Fw-Co(OH)2. Fw-Co(OH)2/g-C3N4 composites were prepared by a facile coating method.38 The synthesized Co(OH)2 particles were first dispersed in ethanol with a desired concentration, which was then subjected to ultrasonic treatment for 30 min to promote the dispersion of Co(OH)2 in the solution. Carbon nitride powders were dispersed in 20 mL ethanol and then a certain amount of Co(OH)2 suspension was added to the mixture. The mixture was then dried in an oil bath, transfered to a vacuum oven and kept at 80 °C overnight to remove ethanol. After that, the uniform powders were annealed at 120 °C for 2 h to strengthen the adhesion between g-C3N4 and the cocatalysts and denoted as Fw-Co(OH)2/g-C3N4, or annealed at 300 °C for 2 h to get Fw-Co3O4/g-C3N4 composites. The loading amounts of FwCo(OH)2 and Fw-Co3O4 were designed at 3 wt.% for comparation. Also, OER efficiencies of gC3N4 loaded with various Fw-Co(OH)2 ratios (3 wt.%, 7 wt.% and 15 wt.%) were conducted to 4 ACS Paragon Plus Environment

Page 4 of 25

Page 5 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

estimate the influence of the loading amount of cobalt hydroxide. Additionally, a physical mixture of Fw-Co(OH)2 and g-C3N4 was obtained by mixing them together in ethanol and drying at room temperature.

2.3 Characterization techniques Powder X-ray diffraction (XRD) patterns were obtained on a Empyrean multi-purpose research diffractomete (Panalytical Empyrean XRD) utilizing Copper Kα radiation (λ = 1.5418 Å) with a current of 40 mA and an voltage of 40 kV. Scanning electron microscopic (SEM) images were catched on a FEI Verios XHR SEM microscope. TEM and SAED images were received with a JEOL 2100 TEM microscope. High angle annular dark field scanning transmission electron microscopy images (HAADF-STEM) mapping was observed under a FEI TITAN G2 (200kV). The Brunauer-Emmett-Teller (BET) specific surface area and pore size dispersion of the materials were assessed by N2 adsorption/desorption utilizing a Micromeritics Tristar 3000. Beforehand, the materials were degassed at 100 oC overnight under vacuum condition. X-ray photoelectron spectroscopy (XPS) was conducted on a Thermo escalab 250 with Al-Kα X-ray to inquire the chemical states of elements. A Shirley background was first subtracted followed by component fitting using Voigt functions with a 30% Lorentzian component. Electron Paramagnetic Resonance (EPR) mensurations were accomplished using a Bruker EMXplus spectrometer under the condition of modulation amplitude (8 G); modulation frequency (100 kHz); microwave frequency (9.48 GHz); and non-saturating microwave power (1.02 Mw).

2.4 Photoelectrochemical measurements Photoelectrochemical tests were accomplished on a Zennium workstation with the CIMPS system (Zahner, Germany) through a three electrode framework, applying a saturated calomel

5 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

electrode (SCE) as the reference electrode and a Pt wire as the counter electrode. F-doped tin oxide (FTO) glasses were cleaned by sonication in ethanol for 30 min and dried at 80 °C to act as the working electrode. Na2SO4 solution (0.2 M, pH = 6.8) was served as the neutral electrolyte during the measurements. Loading of samples on the FTO was performed as below: suspensions containing 8 mg of catalyst, 50 µL 5 wt% Nafion 117 solutions and 500 µL ethanol were obtained by ultrasonic mixing for about 15 min. The resulted suspension (40 µL) was then dropped onto the working electrode through a spin coating method and dried in air (catalyst loading∼0.60 mg cm-2). Photocurrent and EIS measurements were carried out utilizing a Oriel Solar Simulator with a 450 W Xenon arc lamp. Prior to test, the internal light was filtered using a neutral density filters and an AM 1.5G filter into an optical fiber. The output power was calibrated to 100 mW/cm2 utilizing a thermopile detector.

2.5 Oxygen evolution reaction For each reaction, designed amount of catalyst (50 mg) was dispersed in a 50 mL buffered solution (Na2SiF6-NaHCO3, 0.022 M) which was prepared, adjusted the pH to 5.8 and aged for 2 days. Then 0.4875 g of Na2SO4, 0.1785 g of Na2S2O8, and 30 mg of [Ru(bpy)3]Cl2·6H2O were added to the reaction solution. Detailed procedure for photocatalytic OER test was illustrated in supporting information.

3. RESULTS AND DISCUSSION According to the powder XRD data (Figure 1a), a sharp characteristic peak is observed at 27.8°, which corresponds to (002) lattice plane of g-C3N4, and reflects the typical interlayer stacking in a conjugated polymers system.41 As can be seen from the inserted SEM image, morphology

6 ACS Paragon Plus Environment

Page 6 of 25

Page 7 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

feature of g-C3N4 also well illustrates a sheet stacking structure. XRD pattern of cobalt hydroxide (Figure 1b) displays a prominent diffraction peak of (003) plane, suggesting it grew along the preferred c-axis during crystal growth with a type of α-Co(OH)2 (JCPDS card, No. 460605).42 Furthermore, diffraction peaks of the sample obtained from the calcination of cobalt hydroxide demonstrate a crystal pattern of Co3O4 with a spinel structure (JCPDS card, No. 761802), indicating its sufficient oxidation during the annealing process. SEM images of Co(OH)2 and Co3O4 are displayed in Figures 1c-f. As shown, cobalt hydroxide and oxide particles exhibit well-defined floriform morphologies, which are virtually composed of stacked flat slices. The formation of such morphologies is described in Scheme S2. The hydrolysis reaction of urea with crystallized water in cobaltous acetate generates OH– anions, which then react with Co2+ to form Co(OH)2. With the assistance of PVP, the hydroxides were assembled into rod and then flake precipitates, which stacked and formed floriform morphology.43-44 Interestingly, numerous mesopores are observed on the magnified surface of Co3O4 (Figure 1f), which is obviously different from Co(OH)2 (Figure 1d). Such a mesoporous structure can also be observed in other references which involved urea during synthesis.45 To assess the textural properties of

7 ACS Paragon Plus Environment

10

20

30

40

50

60

70

80

10

20

(110) (113)

(018)

(015) 40

(511) 50

60

(440)

Fw-Co3O4

(311)

(012) 30

Fw-Co(OH)2

(400)

g-C3N4

Page 8 of 25

(222)

(111)

(100)

Intensity (a.u.)

g-C3N4

(220)

b)

(006)

(002)

a)

Intensity (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(003)

ACS Applied Materials & Interfaces

70

80

2 Theta (deg)

2 Theta (deg)

cc)

d)

e)

f)

Figure 1. XRD patterns of g-C3N4 (a), Co(OH)2 and Co3O4 (b); SEM images of g-C3N4 (inserted in Figure 1a), Co(OH)2 (c, d) and Co3O4 (e, f).

g-C3N4 and its composites with Fw-Co(OH)2 and Fw-Co3O4, N2 adsorption-desorption isotherms were acquired (Figure S1). The BET surface area of g-C3N4 (54.5 cm3 g–1) and 3% FwCo(OH)2/C3N4 (56.2 cm3 g–1) are similar, while 3% Fw-Co3O4/C3N4 exhibits a higher value of 68.3 (Figure S1a). Pore size distribution (Figure S1b) illustrates that there is an increase in the

8 ACS Paragon Plus Environment

Page 9 of 25

pore volume of Fw-Co3O4/C3N4, especially in the mesopore-size range, corresponding to SEM observation.45 284.6 eV

b) 398.7 eV Intensity (a.u.)

Intensity (a.u.)

a)

399.9 eV 401.0 eV

290.1 eV

282

284

286

288

290

404.5 eV

292

396

398

400

530.6 eV

c)

3/2

529.5 eV

Fw-Co3O4

Intensity (a.u.)

Fw-Co(OH)2

526

528

530

532

406

408

534

Fw-Co(OH)2 2p1/2 793.3 eV 782.7 eV 799.0 eV

2p3/2 778.2 eV 780.2 eV

530.9 eV 531.9 eV

524

404

2p d) 777.3 eV

532.0 eV

529.5 eV

402

Binding Energy (eV)

Binding Energy (eV)

Intensity (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Fw-Co3O4 2p1/2 793.2 eV 795.1 eV

787.7 eV 783.4 eV

536

538

768

Binding Energy (eV)

776

784

800.7 eV 803.1 eV

792

800

808

Binding Energy (eV)

Figure 2. (a) C1s and (b) N1s XPS signals for g-C3N4, (c) O 1s and (d) Co 2p spectra of FwCo(OH)2 and Fw-Co3O4.

Based on XPS analysis (Figure S2a), an atomic C/N proportion of 0.69 was measured in g-C3N4, and on account of the adsorbed water, slight amount of oxygen was detected (0.5 at.%).46 Highresolution C 1s and N 1s were shown in Figure 2a. The peak at 284.6 eV is a characteristic signal for sp2-hybridized carbon bonded to nitrogen in g-C3N4,14 while the tale at 290.1 eV is a typical energy loss “shake-up” feature.47-48 In N 1s (Figure 2b), four peaks at 398.7, 399.9, 401.0, and 404.5 eV can be deconvoluted, coresponding to C-N=C, N-(C)3, C-N-H and a shake-up satellite feature, respectively14, 48.

9 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 25

Full spectrum of Fw-Co(OH)2 (Figure S2b) indicates the existence of Co (14.0 at.%), O (42.1 at.%), C (37.8 at.%), and N (6.1 at.%) in the prepared samples, while the surface element contents in Fw-Co3O4 were detected to be Co (21.2 at.%), O (65.2 at.%) and C (13.7 at.%). The high contents of C and N in Fw-Co(OH)2 were deduced to be C-N-O by-products of urea during hydrothermal treatment, which are embroiled in lamellas of Fw-Co(OH)2 during its growth process. It is thus reasonable to conclude that the mesopores in the lamellas of Fw-Co3O4 (Figure 1f) are resulted from the decomposition of both hydroxide and numerous C-N-O by-products, as described in Scheme S2. Three peaks at 530.6, 532.0 and 529.5 eV fitted in O 1s of Fw-Co(OH)2 are considered to be O from C-O groups, hydroxide, and oxide ions (O2–), respectively.48-49 In O 1s of Fw-Co3O4 (Figure 2c), 529.5, 530.9 and 531.9 eV can be ascribed to the lattice oxygen, oxygen species in H2O and C-O groups, respectively.49-50 Co 2p analysis of Fw-Co(OH)2 (Figure 2d) indicates two pairs of individual peaks at 777.3 and 793.3 eV, corresponding to the Co 2p3/2 and Co 2p1/2, which are identified as the major binding energies of Co2+ in Co(OH)2.49 Furthermore, the best deconvolution of the Co 2p profile was attained with the assumption of eight species, including two pairs of spin-orbit doublets and their four shakeup satellites (783.4, 787.7, 800.7, and 803.1 eV), indicating the coexistence of Co2+ and Co3+.51

When it comes to the hybridized materials, XRD data prove the structure stability of α-Co(OH)2 during the annealing process for recombination with g-C3N4, which is highly desirable as αCo(OH)2 possesses a higher conductivity than β-Co(OH)2. As shown in Figure S3, FwCo(OH)2/g-C3N4 displays the gradual rising diffraction peaks of α-Co(OH)2 with increasing loading amount, meaning no crystal structure transformation with low-temperature treatment.

10 ACS Paragon Plus Environment

Page 11 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Besides, graphite-like structure of g-C3N4 does not show obvious changes after annealing with Fw-Co(OH)2. Typical morphologies of the hybridized materials can be well illustrated from SEM images (Figures 3, S4-S5), in which Fw-Co(OH)2 or Fw-Co3O4 are well wrapped and infiltrated with g-C3N4, proving that they coordinated well in the conjugated system. Compared with two-dimensional Co(OH)2 layers, the 3D flower-like interlayers of Fw-Co(OH)2 or FwCo3O4 can serve as a well-defined support for g-C3N4 to disperse, which is optimal for lightharvesting and electron conduction. Further, from Figures S4a and S5a, which were captured under a relative lower magnification, Fw-Co(OH)2 and Fw-Co3O4 particles were immersed well into a broader g-C3N4 matrix. The coordination and interfaces between these units were tested by EDS mapping of 3% Fw-Co(OH)2/C3N4 (Figure 3c) and HAADF-STEM mapping of 3% Co3O4/g-C3N4 (Figure S5c).

Graphite-like nanosheet-structure of g-C3N4 can be well illustrated in TEM image (Figure S6a). TEM characterization of the hybrids (Figures 3d, S6b) clearly shows that g-C3N4 can be successfully attached to the interlayers and surfaces of Fw-Co(OH)2 and Fw-Co3O4. HRTEM images (Figures 3e and S6c) display a lattice interval of 0.321 nm, corresponding to (002) plane of g-C3N4.52 Meanwhile, an interlayer spacing of 0.467 nm can also be identified to (001) plane of Co(OH)2 (Figure 3e), whereas 0.24 nm lattice fringe can be assigned to (311) plane of Co3O4 (Figure S6c). Inserted selective area electron diffraction (SAED) graph shows a classifiable ring structure characteristic for polycrystalline materials of Co(OH)2 and g-C3N4 (Figure 3e). Naturally, HRTEM with Fast Fourier Transform (FFT) in Figure S5c characterizes the interfaces region between spinel Co3O4 and g-C3N4.

11 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

a)

Page 12 of 25

b)

c)

e)

d)

Figure 3. (a, b) SEM images, (c) EDS mapping of the marked area in a, (d) TEM and (e) HRTEM images of 3% Fw-Co(OH)2/C3N4.

UV-Vis diffuse reflectance spectra (DRS) were acquired and converted into absorbance via the Kubelka-Munk function F(R) = (1-R)2/2R = K/S, where R is the diffuse reflectance, K is the absorption and S is the scattering coefficient. Obviously, all the absorption spectra exhibits steep edges at wavelength of around 450 nm, which can be attributed to the band gap transition. It is noted that there is an increase of optical absorption in wavelengths ranging from 430 to 750 nm, after loading Fw-Co(OH)2 or Fw-Co3O4 onto g-C3N4. In other words, better absorption occurred in the visible spectrum region for the composites. The accelerated charge carrier transfer was 12 ACS Paragon Plus Environment

Page 13 of 25

investigated through room temperature photoluminescence (PL) spectra (inset picture in Figure 4a). As shown, when the exciting light irradiates on the composites, the quenching is more remarkable compared with pristine g-C3N4.

Intensity/a.u.

600

1.0

0.8

b)

g-C3N4

25

3% Fw-Co(OH)2/C3N4

3% Fw-Co3O4/C3N4 3% Fw-Co(OH)2/C3N4

400

200

0.6 0 400

0.4

500

600

700

Wavelength (nm)

3% Fw-Co3O4/C3N4

20

1/C 2*10 9 (cm 4 F -2)

1.2

a) Absorbance (a.u.)

g-C3N4 15

10

5

0.2

0.0 300

400

500

600

700

800

0 -1.6

-1.4

-1.2

-1.0

-0.8

-0.6

-0.4

-0.2

Potential (V vs. SCE)

Wavelength (nm)

d)

c)

3% Fw-Co(OH)2/C3N4 3% Fw-Co3O4/C3N4 g-C3N4/C3N4

Intensity (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

3480

3490

3500

3510

3520

3530

3540

Field (G)

Figure 4. (a) UV-vis absorption spectra, PL (inserted graph), (b) Electrochemical Mott-Schottky plots, (c) Band structure diagram of g-C3N4 and corresponding composites, (d) Room temperature EPR spectra of g-C3N4, 3% Fw-Co(OH)2/C3N4 and 3% Fw-Co3O4/C3N4.

Mott-Schottky relationship (1/C2 vs E, (MS)) for g-C3N4, 3% Fw-Co(OH)2/C3N4 and 3% FwCo3O4/C3N4 were investigated and combined with UV-Vis DRS to determine the changes of band structure of g-C3N4, 3% Fw-Co(OH)2/C3N4 and 3% Fw-Co3O4/C3N4. Figure 4b features a

13 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 25

typical n-type semiconductor for all the three materials. The flat band potential values (Efb) of gC3N4, 3% Fw-Co(OH)2/C3N4 and 3% Fw-Co3O4/C3N4 were calculated to be -1.01, -0.80, and 0.85 V, respectively, versus the saturated calomel electrode (SCE). Relatively positive flat band potential of the composites reflects the weaker upward band bending of g-C3N4, originating from its n-type semiconductor properties.39,

53

Further, a positive shift of the flat band potential

demonstrates that an electric field forms at the interface between g-C3N4 and Fw-Co(OH)2, which can elevates the separation efficiency of the photogenerated holes and electrons, and thus converting the band alignment. As a result, the valence band position of 3% Fw-Co(OH)2/C3N4 and 3% Fw-Co3O4/C3N4 will be more positive, as confirmed by the extrapolation method (Figure S7) and band structure diagram (Figure 4c).53 Figure 4d shows the spectra of room-temperature electron paramagnetic resonance (EPR) of g-C3N4, 3% Fw-Co(OH)2/C3N4 and 3% FwCo3O4/C3N4. All the compounds including g-C3N4 presented one single Lorentzian line with a g value of 2.003, derived from the delocalized π-bonded system of carbon nitride.54 Interestingly, the signals of 3% Fw-Co(OH)2/g-C3N4 has some degrees of fluctuation compared with pure gC3N4. This further exemplified that the essential band structure and texture of g-C3N4 are influenced slightly after being coated with Fw-Co(OH)2. Fw-Co3O4/g-C3N4 exhibits the highest peak, suggesting the extended π-bonding caused by the repolymerization of the redundant striazine units during annealing progress at higher temperature.

14 ACS Paragon Plus Environment

28

28

a

b

g-C3N4

16

Fw-Co3O4

15% Fw-Co(OH)2/C3N4

24

7% Fw-Co(OH)2/C3N4

24

3% Fw-Co(OH)2/C3N4 7% Fw-Co(OH)2/C3N4 (Physical mixture)

20

O2 concentration (µM)

O2 concentration (µM)

3% Fw-Co3O4/C3N4 12

7% Fw-Co(OH)2/C3N4 (450nm>λ>400nm)

20

Fw-Co(OH)2 g-C3N4

7% Fw-Co(OH)2/C3N4 (550nm>λ>450nm) 7% Fw-Co(OH)2/C3N4 (λ>420nm)

16

16

8

Without catalyst Without photosensitizer Without sacrificial agent 7% Fw-Co(OH)2/C3N4 (λ>550nm)

c

7% Fw-Co(OH)2/C3N4

Fw-Co(OH)2

12

12

8

8

4 4

4

0

0

0 0

20

40

60

80

100

120

0

20

40

80

100

30000

ON

2.0

0

120

20

OFF

60

80

100

120

e Rs

3% Fw-Co3O4/C3N4

40

Time (min)

3% Fw-Co(OH)2/C3N4

2.4

25000

CPEdl

g-C3N4

g-C3N4

Rct

20000 1.6

Z'' (Ω)

d

60

Time (min)

Time (min)

Photocurrent Density (µA/cm2)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

O2 concentration (µM)

Page 15 of 25

1.2

15000

0.8

10000

0.4

5000

3% Fw-Co3O4/C3N4

0.0

3% Fw-Co(OH)2/C3N4

0 0

20

40

60

80

100

120

140

160

180

Dark Light

0

5000

Time (s)

10000

15000

20000

25000

Z' (Ω)

Figure 5. Heterogeneous water oxidation of (a), (b) on different samples, (c) in different conditions (Error bar: standard deviation), (d) Photo-electric properties of g-C3N4, 3% FwCo(OH)2/C3N4 and 3% Fw-Co3O4/C3N4, and (e) Electrochemical impedance spectroscopy under dark and light condition.

Photocatalytic water oxidation of the as-prepared samples were conducted under visible light irradiations (λ>420 nm), using persulfate (S2O82–) as a sacrifice oxidant for the reduction reaction, whereas tris (2,2’-bipyridine) ruthenium(II) (Ru(bpy)32+) as a one-electron oxidant photosensitizer to promote multiple-electron water oxidation kinetics and avoid excessive driving potentials.55-56 Figure 5a describes the time dependence of oxygen concentration over the synthesized catalysts, among which 3% Fw-Co(OH)2/C3N4 displayed the best performance, followed by 3% Fw-Co3O4/C3N4, Fw-Co(OH)2, Fw-Co3O4 and g-C3N4. It is also observed that

15 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 25

the reaction rates show an inevitable slowdown trend for all the catalysts with longer reaction time. This can be explained by two possible reasons, e.g. the consumption of sacrificial agents [S2O8]2−, the quenching and decomposition of photosensitizers.35,

50, 55-56

The observable O2

evolution by pure Co(OH)2 indicates that it can work alone for photocatalytic water oxidation. Even though the activity is low, the results still suggest that electrons can be transferred from Co(OH)2 to [Ru(bpy)3]3+ molecules and oxidize water upon photo-irradiation.5 Fw-Co3O4 exhibited an inferior but observable catalytic oxygen evolution performance compared with FwCo(OH)2. For optimization of the oxygen production efficiency, different ratios of Fw-Co(OH)2 (3 wt.%, 7 wt.%, and 15 wt.%) were loaded onto g-C3N4. Figure 5b displays that, as the weight ratio of Fw-Co(OH)2 increased to 7 wt.%, oxygen production concentration significantly increased. When the ratio was further elevated to 15 wt.%, the rate slightly decreased, as extravagant loading of Fw-Co(OH)2 might block the optical absorption of g-C3N4. Recycling experiments were conducted using the collected sample of 7% Fw-Co(OH)2/C3N4 after the firstrun. The performance of the catalyst in the second run is presented in Figure S8, achieving about 50% retention. This is because of the consumption of the composite after one water oxidation run, as confirmed by the relevant SEM and EDS tests (Figure S9). g-C3N4 (Figure S9a) and FwCo(OH)2 (Figure S9b) suffered from various degrees of depletion compared with the pristine hybrid material (Figure S4). Besides, the water oxidation performance of physical mixture of 7% Fw-Co(OH)2/g-C3N4 was conducted. It is worth noting that the sample exhibited a higher rate of O2 evolution than both g-C3N4 and Fw-Co(OH)2, however, the activity was still much lower than that of the annealed hybrid material. A similar pattern was reported in Ref. [5]. These results suggest that the synergistic and intimate interaction effects between Fw-Co(OH)2 and g-C3N4 are crucial for the visible-light water oxidation activity. The apparent quantum efficiency (AQE) under irradiation (λ=450 nm) for 7% Fw-Co(OH)2/g-C3N4 was calculated to be approximately 0.16 % (detailed steps were provided in supportting information). Furthermore, the OER activity of 7% Fw-Co(OH)2/g-C3N4 is among the best cocatalyst/g-C3N4 composites under visible light irridation in comparision to recent studies (Table S1).

For the mechnistic studies, experiments without a photosensitizer, a catalyst or a sacrificial agent were performed (Figure 5c). Almost no activity was observed, indicating that Fw-Co(OH)2/C3N4, [Ru(bpy)3]2+ and Na2S2O8 are critical for the whole oxygen evolution processes. Since both 7% 16 ACS Paragon Plus Environment

Page 17 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Fw-Co(OH)2/C3N4 and [Ru(bpy)3]2+ can absorb visible light, band-pass filters were employed to differentiate their individual photo-absorption wavelength for oxygen evolution reaction. 7% Fw-Co(OH)2/C3N4 indicates strong absorption mainly in the range of 400 to 450 nm (Figure 4a), while [Ru(bpy)3]Cl2•6H2O (Figure S10) displays wide and strong visible light absorption in 400550 nm. Therefore, three wavelength ranges were selected at 400-450, 450-550 and > 550 nm, respectively. O2 evolution rates using 7% Fw-Co(OH)2/C3N4 under the three ranges are depicted in Figure 5c. Under a wide range irradiation of 450 to 550 nm, in which 7% Fw-Co(OH)2/C3N4 shows weak absorption, O2 evolution rate only displayed a slight decay compared with that performed under the full visible light range. However, in 400-450 nm, which is the strongest absorption

range

for

7%

Fw-Co(OH)2/C3N4

and

a

relatively

narrow

range

for

[Ru(bpy)3]Cl2•6H2O, the activity was significantly weakened. For wavelength longer than 550 nm, the performance was further lowered. Therefore, we can conclude that [Ru(bpy)3]2+ acted as a photon acquisition agent. The complete diagram of the reaction mechanism during water oxidation is illustrated in Scheme 1. As shown, [Ru(bpy)3]2+ could trap the same equivalent of photons from the incident light and be activated to the metal-to-ligand charge-transfer (MLCT) excited state [Ru(bpy)3]2+*. [Ru(bpy)3]2+* can be quenched by S2O82−, resulting in SO42−, SO4•− (sulfate radical) and [Ru(bpy)3]3+. SO4•− can then oxidize other [Ru(bpy)3]2+ to [Ru(bpy)3]3+. Upon irradiation, electrons and holes are activated and separated from Fw-Co(OH)2/C3N4, and then the photogenerated electrons transfer to [Ru(bpy)3]3+ regenerating [Ru(bpy)3]2+, leading to O2 evolution via water oxidation. The redox process can be verified by the room temperature EPR under in-situ irradiation (Figure S11). When the reaction solution was irradiated for 30 s, distinct signal of SO4•− can be observed. Meanwhile, the OH•− (hydroxyl radical) oxidized from water molecules during the catalytic half-reaction can be also detected. Due to the small capacity limitation of EPR capillary and the consumption for [Ru(bpy)3]2+ oxidation, the produced signals of SO4•− and OH•− were quenched under longer time irradiation.

17 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 25

Scheme 1. Heterogeneous water oxidation system catalyzed by Fw-Co(OH)2/Fw-Co3O4 deposited g-C3N4.

To explain the catalytic performance of the acquired catalysts, photoelectrochemical tests were performed under dark or visible light irradiations (λ > 420 nm). As shown in Figure 5c, the photocurrent intensity of 3% Fw-Co(OH)2/C3N4 is about 4 times as high as that of pristine gC3N4 in the first cycle. Fw-Co3O4/C3N4 is inferior, yet still stronger than pure g-C3N4, consistent with their OER performance. It is thought that Fw-Co(OH)2/Fw-Co3O4 can promote the separation and transfer efficiency of the charge carrier of g-C3N4, resulting in more intense photocurrent response of the hybrids and better OER effect, as described in Scheme 1. This can be further supported by the electrochemical Nyquist program tests (Figure 5d), which are commonly adopted to evaluate electron transfer abilities. In electrochemical impedance spectra (EIS), the high frequency zone corresponds to a charge transfer limiting process and can be related to the charge transfer resistance (Rct) in the contacting interface with double-layer capacitance (CPEdl) (As shown in the inset equivalent circuit, Rs is the solution resistance). 14, 57 The arc radius of 3% Fw-Co(OH)2/ C3N4 is the smallest, followed by 3% Fw-Co3O4/C3N4, implying their better charge transfer ability than pure g-C3N4.

18 ACS Paragon Plus Environment

Page 19 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

The more excellent modification on g-C3N4 by Fw-Co(OH)2 than Fw-Co3O4 can be virtually ascribed to the prominent hydrotalcite-like structure of α-Co(OH)2, whose layered double hydroxyl (LDH) groups provide a more effective layered channel for photogenerated holes from photoexcited g-C3N4 to Co(OH)2, as illustrated in Scheme 2.58-60 However, due to spinel structure of Co3O4, the excited holes are transmitted saltatorily between Co2+ (tetrahedral interstice) and Co3+ (octahedral interstices), resulting in its relatively inefficient rate of charge transfer comparing with Fw-Co(OH)2.61 Further, the active sites in Co3O4 are limited to an exclusive octahedral Co3+ because Co2+ is ineffective in the spinel crystal structure.26 However, the flexible oxidoreduction transformation of dissimilar valence states (Co2+, Co3+) are able to happen in Fw-Co(OH)2 with hydrotalcite-like LDH.62 Apart from the inefficiency of assistant separation of photogenerated electrons and holes, the darker color of the cobalt oxide results in the higher photoelectron absorption ability with a relatively lower release rate.14

a)

b)

Scheme 2. (a) Schematic drawings of α-Co(OH)2 with hydrotalcite structure with layered double hydroxyl (LDH) groups, (b) Co3O4 with a spinel structure.

4. CONCLUSIONS In summary, we have shown that pristine g-C3N4 closely decorated with flower-like cobalt hydroxide/oxide composites, developed by a simple coating route, are effective catalysts for 19 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

water oxidation under visible-light irradiations. Slight amount of Co specie introduction has a positive effect on the electron-hole separation, charge carriers transfer rate and electronic conductivity of g-C3N4, which result in the enhanced photoelectric effect and more active photocatalytic OER activities. Owing to superior electron transfter ability of hydrotalcite structure in α-Co(OH)2, Fw-Co(OH)2/g-C3N4 possesses a more excellent OER activity than FwCo3O4/g-C3N4. 7 wt.% loading amount of Fw-Co(OH)2 onto g-C3N4 displayed the best photocatalytic capability. This study provides a fresh insight into the use of non-noble OER cocatalysts decorated g-C3N4 for water oxidation in aqueous phase.

■ ASSOCIATED CONTENT Supporting Information

Scheme of synthesis and evolutionary process of the as-prepared sample. N2 adsorption desorption isotherms, supplementary XPS survey, XRD data, SEM, TEM figures and EDX analysis. Oxygen analysis and tabled comparision. This material is available free of charge via the Internet at http://pubs.acs.org.

■ AUTHOR INFORMATION Corresponding Authors. *Email: [email protected] (S. Wang), [email protected] (H. Sun).

Notes The authors declare no competing financial interest

■ ACKNOWLEDGMENTS 20 ACS Paragon Plus Environment

Page 20 of 25

Page 21 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

This project was partially supported by Australian Research Council (ARC) under Project No.: DP150103026. Technical support from Centre for Microscopy, Characterization and Analysis, The University of Western Australia; Electron Microscope Facility, Curtin University; as well as the X-ray Surface Analysis Facility, Curtin University, funded by the Australian Research Council LIEF (Grant LE120100026).

■ REFERENCES (1) Kim, T. W.; Ping, Y.; Galli, G. A.; Choi, K. S. Simultaneous Enhancements in Photon Absorption and Charge Transport of Bismuth Vanadate Photoanodes for Solar Water Splitting. Nat. Commun. 2015, 6, 8769-8770. (2) Carroll, G. M.; Zhong, D. K.; Gamelin, D. R. Mechanistic Insights into Solar Water Oxidation by Cobalt-Phosphate-Modified Alpha-Fe2O3 Photoanodes. Energy Environ. Sci. 2015, 8, 577-584. (3) Li, X.; Yu, J. G.; Low, J. X.; Fang, Y. P.; Xiao, J.; Chen, X. B. Engineering Heterogeneous Semiconductors for Solar Water Splitting. J. Mater. Chem. A 2015, 3, 2485-2534. (4) Yang, Y.; Fei, H.; Ruan, G.; Tour, J. M. Porous Cobalt-Based Thin Film as a Bifunctional Catalyst for Hydrogen Generation and Oxygen Generation. Adv. Mater. 2015, 27, 3175-80. (5) Maeda, K.; Ishimaki, K.; Tokunaga, Y.; Lu, D.; Eguchi, M. Modification of Wide-Band-Gap Oxide Semiconductors with Cobalt Hydroxide Nanoclusters for Visible-Light Water Oxidation. Angew. Chem., Int. Ed. 2016, 55, 8309-8313. (6) Zhang, J.; Zhang, G.; Chen, X.; Lin, S.; Mohlmann, L.; Dolega, G.; Lipner, G.; Antonietti, M.; Blechert, S.; Wang, X. Co-Monomer Control of Carbon Nitride Semiconductors to Optimize Hydrogen Evolution with Visible Light. Angew. Chem. Int., Ed. 2012, 51, 3183-3187. (7) Zheng, Y.; Lin, L.; Ye, X.; Guo, F.; Wang, X. Helical Graphitic Carbon Nitrides with Photocatalytic and Optical Activities. Angew. Chem., Int. Ed. 2014, 53, 11926-11930. (8) Dong, X. P.; Cheng, F. X. Recent Development in Exfoliated Two-Dimensional g-C3N4 Nanosheets for Photocatalytic Applications. J. Mater. Chem. A 2015, 3, 23642-23652. (9) Cao, S.; Low, J.; Yu, J.; Jaroniec, M. Polymeric Photocatalysts Based on Graphitic Carbon Nitride. Adv. Mater. 2015, 27, 2150-2176. (10) Niu, P.; Zhang, L.; Liu, G.; Cheng, H. M. Graphene-Like Carbon Nitride Nanosheets for Improved Photocatalytic Activities. Adv. Funct. Mater. 2012, 22, 4763-4770. (11) Jorge, A. B.; Martin, D. J.; Dhanoa, M. T. S.; Rahman, A. S.; Makwana, N.; Tang, J.; Sella, A.; Corà, F.; Firth, S.; Darr, J. A.; McMillan, P. F. H2 and O2 Evolution from Water Half-Splitting Reactions by Graphitic Carbon Nitride Materials. J. Phys. Chem. C 2013, 117, 7178-7185. (12) Chu, S.; Wang, Y.; Guo, Y.; Feng, J.; Wang, C.; Luo, W.; Fan, X.; Zou, Z. Band Structure Engineering of Carbon Nitride: In Search of a Polymer Photocatalyst with High Photooxidation Property. ACS Catal. 2013, 3, 912-919. (13) Maeda, K.; Wang, X. C.; Nishihara, Y.; Lu, D. L.; Antonietti, M.; Domen, K. Photocatalytic Activities of Graphitic Carbon Nitride Powder for Water Reduction and Oxidation under Visible Light. J. Phys. Chem. C 2009, 113, 4940-4947. (14) Zhang, G. G.; Zang, S. H.; Wang, X. C. Layered Co(OH)2 Deposited Polymeric Carbon Nitrides for Photocatalytic Water Oxidation. ACS Catal. 2015, 5, 941-947.

21 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 25

(15) Tian, N.; Huang, H.; Liu, C.; Dong, F.; Zhang, T.; Du, X.; Yu, S.; Zhang, Y. In Situ Co-Pyrolysis Fabrication of CeO2/g-C3N4 n-n Type Heterojunction for Synchronously Promoting Photo-Induced Oxidation and Reduction Properties. J. Mater. Chem. A 2015, 3, 17120-17129. (16) Zhang, G.; Huang, C.; Wang, X. Dispersing Molecular Cobalt in Graphitic Carbon Nitride Frameworks for Photocatalytic Water Oxidation. Small 2015, 11, 1215-1221. (17) Algara-Siller, G.; Severin, N.; Chong, S. Y.; Bjorkman, T.; Palgrave, R. G.; Laybourn, A.; Antonietti, M.; Khimyak, Y. Z.; Krasheninnikov, A. V.; Rabe, J. P.; Kaiser, U.; Cooper, A. I.; Thomas, A.; Bojdys, M. J. Triazine-Based Graphitic Carbon Nitride: a Two-Dimensional Semiconductor. Angew. Chem. Int. Ed. 2014, 53, 7450-7455. (18) Bojdys, M. J.; Muller, J. O.; Antonietti, M.; Thomas, A. Ionothermal Synthesis of Crystalline, Condensed, Graphitic Carbon Nitride. Chemistry 2008, 14, 8177-8182. (19) Zhang, G.; Lan, Z. A.; Lin, L.; Lin, S.; Wang, X. Overall Water Splitting by Pt/g-C3N4 Photocatalysts without Using Sacrificial Agents. Chem. Sci. 2016, 7, 3062-3066. (20) Cui, Y.; Ding, Z.; Fu, X.; Wang, X. Construction of Conjugated Carbon Nitride Nanoarchitectures in Solution at Low Temperatures for Photoredox Catalysis. Angew. Chem., Int. Ed. 2012, 51, 11814-11818. (21) Lin, Z.; Wang, X. Nanostructure Engineering and Doping of Conjugated Carbon Nitride Semiconductors for Hydrogen Photosynthesis. Angew. Chem., Int. Ed. 2013, 52, 1735-1738. (22) Zhang, J.; Zhang, M.; Lin, L.; Wang, X. Sol Processing of Conjugated Carbon Nitride Powders for Thin-Film Fabrication. Angew. Chem., Int. Ed. 2015, 54, 6297-6301. (23) Zheng, D.; Cao, X. N.; Wang, X. Precise Formation of a Hollow Carbon Nitride Structure with a Janus Surface To Promote Water Splitting by Photoredox Catalysis. Angew. Chem., Int. Ed. 2016, 55, 11512-11516. (24) Zhang, F.; Yamakata, A.; Maeda, K.; Moriya, Y.; Takata, T.; Kubota, J.; Teshima, K.; Oishi, S.; Domen, K. Cobalt-Modified Porous Single-Crystalline LaTiO2N for Highly Efficient Water Oxidation under Visible Light. J. Am. Chem. Soc. 2012, 134, 8348-8351. (25) Higashi, M.; Domen, K.; Abe, R. Highly Stable Water Splitting on Oxynitride TaON Photoanode System under Visible Light Irradiation. J. Am. Chem. Soc. 2012, 134, 6968-6971. (26) Hutchings, G. S.; Zhang, Y.; Li, J.; Yonemoto, B. T.; Zhou, X. G.; Zhu, K. K.; Jiao, F. In Situ Formation of Cobalt Oxide Nanocubanes as Efficient Oxygen Evolution Catalysts. J. Am. Chem. Soc. 2015, 137, 4223-4229. (27) Xiang, Q. J.; Chen, G.; Lau, T. C. Effects of Morphology and Exposed Facets of Alpha-Fe2O3 Nanocrystals on Photocatalytic Water Oxidation. Rsc Adv. 2015, 5, 52210-52216. (28) Ahn, H. S.; Yano, J.; Tilley, T. D. Photocatalytic Water Oxidation by Very Small Cobalt Domains on a Silica Surface. Energy Environ. Sci. 2013, 6, 3080-3087. (29) Zidki, T.; Zhang, L. H.; Shafirovich, V.; Lymar, S. V. Water Oxidation Catalyzed by Cobalt(II) Adsorbed on Silica Nanoparticles. J. Am. Chem. Soc. 2012, 134, 14275-14278. (30) Huynh, M.; Shi, C. Y.; Billinge, S. J. L.; Nocera, D. G. Nature of Activated Manganese Oxide for Oxygen Evolution. J. Am. Chem. Soc. 2015, 137, 14887-14904. (31) Wee, T. L.; Sherman, B. D.; Gust, D.; Moore, A. L.; Moore, T. A.; Liu, Y.; Scaiano, J. C. Photochemical Synthesis of a Water Oxidation Catalyst Based on Cobalt Nanostructures. J. Am. Chem. Soc. 2011, 133, 16742-16745. (32) Seabold, J. A.; Choi, K. S. Efficient and Stable Photo-Oxidation of Water by a Bismuth Vanadate Photoanode Coupled with an Iron Oxyhydroxide Oxygen Evolution Catalyst. J. Am. Chem. Soc. 2012, 134, 2186-2192. (33) Jiao, F.; Frei, H. Nanostructured Cobalt Oxide Clusters in Mesoporous Silica as Efficient OxygenEvolving Catalysts. Angew. Chem., Int. Ed. 2009, 48, 1841-1844. (34) Ge, L.; Han, C.; Xiao, X.; Guo, L. In Situ Synthesis of Cobalt–Phosphate (Co–Pi) Modified g-C3N4 Photocatalysts with Enhanced Photocatalytic Activities. Appl. Catal., B 2013, 142-143, 414-422. (35) Han, X. B.; Zhang, Z. M.; Zhang, T.; Li, Y. G.; Lin, W. B.; You, W. S.; Su, Z. M.; Wang, E. B. Polyoxometalate-Based Cobalt-Phosphate Molecular Catalysts for Visible Light-Driven Water Oxidation. J. Am. Chem. Soc. 2014, 136, 5359-5366.

22 ACS Paragon Plus Environment

Page 23 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

(36) Han, X. B.; Li, Y. G.; Zhang, Z. M.; Tan, H. Q.; Lu, Y.; Wang, E. B. Polyoxometalate-Based Nickel Clusters as Visible Light-Driven Water Oxidation Catalysts. J. Am. Chem. Soc. 2015, 137, 5486-5493. (37) Grzelczak, M.; Zhang, J. S.; Pfrommer, J.; Hartmann, J.; Driess, M.; Antonietti, M.; Wang, X. C. Electro- and Photochemical Water Oxidation on Ligand-Free Co3O4 Nanoparticles with Tunable Sizes. ACS Catal. 2013, 3, 383-388. (38) Zhang, J. S.; Grzelczak, M.; Hou, Y. D.; Maeda, K.; Domen, K.; Fu, X. Z.; Antonietti, M.; Wang, X. C. Photocatalytic Oxidation of Water by Polymeric Carbon Nitride Nanohybrids Made of Sustainable Elements. Chem. Sci. 2012, 3, 443-446. (39) Bai, X. J.; Wang, L.; Wang, Y. J.; Yao, W. Q.; Zhu, Y. F. Enhanced Oxidation Ability of g-C3N4 Photocatalyst via C-60 Modification. Appl. Catal., B 2014, 152, 262-270. (40) He, C. Z.; Qiu, S.; Wang, X. Z.; Liu, J. R.; Luan, L. Q.; Liu, W.; Itoh, M.; Machida, K. Facile Synthesis of Hollow Porous Cobalt Spheres and Their Enhanced Electromagnetic Properties. J. Mater. Chem. A 2012, 22, 22160-22166. (41) Yang, S.; Gong, Y.; Zhang, J.; Zhan, L.; Ma, L.; Fang, Z.; Vajtai, R.; Wang, X.; Ajayan, P. M. Exfoliated Graphitic Carbon Nitride Nanosheets as Efficient Catalysts for Hydrogen Evolution under Visible Light. Adv. Mater. 2013, 25, 2452-2456. (42) Liu, Z. P.; Ma, R. Z.; Osada, M.; Takada, K.; Sasaki, T. Selective and Controlled Synthesis of Alpha- and Beta-Cobalt Hydroxides in Highly Developed Hexagonal Platelets. J. Am. Chem. Soc. 2005, 127, 13869-13874. (43) Koczkur, K. M.; Mourdikoudis, S.; Polavarapu, L.; Skrabalak, S. E. Polyvinylpyrrolidone (PVP) in Nanoparticle Synthesis. Dalton. Trans. 2015, 44, 17883-17905. (44) Wu, S.; Liu, T.; Zeng, W.; He, J.; Yu, W.; Gou, Z. Rose-Like Cu2O Synthesized by Assisted PVP K30 Hydrothermal Method. J. Mater. Sci. : Mater Electron 2013, 24, 2404-2409. (45) Wang, Y.; Zhou, T.; Jiang, K.; Da, P.; Peng, Z.; Tang, J.; Kong, B.; Cai, W.-B.; Yang, Z.; Zheng, G. Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes. Adv. Energy Mater. 2014, 4, 1400696. (46) Lyth, S. M.; Nabae, Y.; Moriya, S.; Kuroki, S.; Kakimoto, M. A.; Ozaki, J. I.; Miyata, S. Carbon Nitride as a Nonprecious Catalyst for Electrochemical Oxygen Reduction. J. Phys. Chem. C 2009, 113, 20148-20151. (47) Zhu, Y.; Murali, S.; Stoller, M. D.; Ganesh, K. J.; Cai, W.; Ferreira, P. J.; Pirkle, A.; Wallace, R. M.; Cychosz, K. A.; Thommes, M.; Su, D.; Stach, E. A.; Ruoff, R. S. Carbon-Based Supercapacitors Produced by Activation of Graphene. Science 2011, 332, 1537-1541. (48) Moulder, J. F.; Chastain, J. Handbook of X-Ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of XPS Data; Physical Electronics Division, PerkinElmer Corp.: Eden Prairie, Minnesota, U.S., 1992, 40-45. (49) Yang, J.; Liu, H.; Martens, W. N.; Frost, R. L. Synthesis and Characterization of Cobalt Hydroxide, Cobalt Oxyhydroxide, and Cobalt Oxide Nanodiscs. J. Phys. Chem. C 2010, 114, 111-119. (50) Fukuzumi, S.; Jung, J.; Yamada, Y.; Kojima, T.; Nam, W. Homogeneous and Heterogeneous Photocatalytic Water Oxidation by Persulfate. Chem. Asian. J. 2016, 11, 1138-1150. (51) Ma, T. Y.; Dai, S.; Jaroniec, M.; Qiao, S. Z. Metal-Organic Framework Derived Hybrid Co3O4Carbon Porous Nanowire Arrays as Reversible Oxygen Evolution Electrodes. J. Am. Chem. Soc. 2014, 136, 13925-13931. (52) Tian, J.; Liu, Q.; Ge, C.; Xing, Z.; Asiri, A. M.; Al-Youbi, A. O.; Sun, X. Ultrathin Graphitic Carbon Nnitride Nanosheets: a Low-cost, Green, and Highly Efficient Electrocatalyst Toward the Reduction of Hydrogen Peroxide and Its Glucose Biosensing Application. Nanoscale 2013, 5, 8921-8924. (53) Zhang, J.; Sun, J.; Maeda, K.; Domen, K.; Liu, P.; Antonietti, M.; Fu, X.; Wang, X. Sulfur-Mediated Synthesis of Carbon Nitride: Band-Gap Engineering and Improved Functions for Photocatalysis. Energy Environ. Sci. 2011, 4, 675-678. (54) Sun, J.; Zhang, J.; Zhang, M.; Antonietti, M.; Fu, X.; Wang, X. Bioinspired Hollow Semiconductor Nanospheres as Photosynthetic Nanoparticles. Nat. Commun. 2012, 1139-1146.

23 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 25

(55) Morris, N. D.; Mallouk, T. E. A High-Throughput Optical Screening Method for the Optimization of Colloidal Water Oxidation Catalysts. J. Am. Chem. Soc. 2002, 124, 11114-11121. (56) Hong, D. C.; Yamada, Y.; Nagatomi, T.; Takai, Y.; Fukuzumi, S. Catalysis of Nickel Ferrite for Photocatalytic Water Oxidation Using [Ru(bpy)3]2+ and S2O82-. J. Am. Chem. Soc. 2012, 134, 1957219575. (57) Dong, G.; Zhao, K.; Zhang, L. Carbon Self-Doping Induced High Electronic Conductivity and Photoreactivity of g-C3N4. Chem. Commun. 2012, 48, 6178-6180. (58) Fan, G.; Li, F.; Evans, D. G.; Duan, X. Catalytic Applications of Layered Double Hydroxides: Recent Advances and Perspectives. Chem. Soc. Rev. 2014, 43, 7040-7066. (59) Abellan, G.; Coronado, E.; Marti-Gastaldo, C.; Ribera, A.; Jorda, J. L.; Garcia, H. Photo-Switching in a Hybrid Material Made of Magnetic Layered Double Hydroxides Intercalated with Azobenzene Molecules. Adv. Mater. 2014, 26, 4156-4162. (60) Wang, L.; Dong, Z. H.; Wang, Z. G.; Zhang, F. X.; Jin, J. Layered α-Co(OH)2 Nanocones as Electrode Materials for Pseudocapacitors: Understanding the Effect of Interlayer Space on Electrochemical Activity. Adv. Funct. Mater. 2013, 23, 2758-2764. (61) Xiao, X.; Liu, X.; Zhao, H.; Chen, D.; Liu, F.; Xiang, J.; Hu, Z.; Li, Y. Facile Shape Control of Co3O4 and the Effect of the Crystal Plane on Electrochemical Performance. Adv. Mater. 2012, 24, 57625766. (62) Ma, R.; Takada, K.; Fukuda, K.; Iyi, N.; Bando, Y.; Sasaki, T. Topochemical Synthesis of Monometallic (Co2+-Co3+) Layered Double Hydroxide and Its Exfoliation into Positively Charged Co(OH)2 Nanosheets. Angew. Chem. Int. Ed. 2008, 47, 86-89.

24 ACS Paragon Plus Environment

Page 25 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

TOC Graphic

25 ACS Paragon Plus Environment