Palladium-Catalyzed Synthesis of Diaryl Ketones from Aldehydes and

5 days ago - ERATO, Japan Science and Technology Agency (JST), Kanai Life Science Catalysis Project, 7-3-1 Hongo, Bunkyo-ku , Tokyo 113-0033 , Japan. ...
4 downloads 9 Views 2MB Size
Letter Cite This: ACS Catal. 2018, 8, 3123−3128

pubs.acs.org/acscatalysis

Palladium-Catalyzed Synthesis of Diaryl Ketones from Aldehydes and (Hetero)Aryl Halides via C−H Bond Activation Takayuki Wakaki,† Takaya Togo,† Daisuke Yoshidome,‡ Yoichiro Kuninobu,*,§,∥ and Motomu Kanai*,†,∥ †

Graduate School of Pharmaceutical Sciences, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033, Japan Schrödinger K.K., 1-8-1 Marunouchi, Chiyoda-ku, Tokyo 100-0005, Japan § Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasugakoen, Kasuga-shi, Fukuoka 816-8580, Japan ∥ ERATO, Japan Science and Technology Agency (JST), Kanai Life Science Catalysis Project, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033, Japan ‡

S Supporting Information *

ABSTRACT: We developed a palladium-catalyzed C−H transformation that enabled the synthesis of ketones from aldehydes and (hetero)aryl halides. The use of picolinamide ligands was key to achieving the transformation. Heteroaryl ketones, as well as diaryl ketones, were synthesized in good to excellent yields, even in gram-scale, using this reaction. Results of density functional theory (DFT) calculations support the C−H bond activation pathway. KEYWORDS: C−H activation, palladium, aldehyde, ketone, heteroaryl ketone, ligand design



INTRODUCTION Transition-metal-catalyzed C−H transformations are widely developed because of their promising features, such as step and atom economy. Directing groups are especially powerful for promoting the desired C−H transformations.1 Daugulis and coworkers developed a new bidentate directing group, as well as C−H transformations, using the bidentate directing group.2 Since then, many research groups have intensively studied bidentate directing group-assisted C−H transformations (Figure 1a).3 However, the use of bidentate directing groups requires additional steps to install and remove the directing groups before

and after the reactions. In addition, stoichiometric amounts of the directing groups are required. The two main roles of the directing groups are (i) to bring catalytically active transition-metal species close to the reaction sites and (ii) to work as ligands to the metal centers. By focusing on the latter role, we considered that C−H transformations could be achieved using a bidentate moiety of the directing group, such as a picolinamide group, as a catalyst ligand (Figure 1b). In this system, the use of only a catalytic amount of the bidentate moiety as a ligand is sufficient to promote the desired C−H transformations. To the best of our knowledge, C−H transformations using such a ligand have not been reported.4 Diaryl ketones are useful skeletons, but their efficient synthetic methods are limited. Generally, a method using the Weinreb amide, oxidation of the corresponding secondary alcohol, Friedel−Crafts acylation, and cross-coupling reaction of acyl chlorides using a palladium catalyst, are usually used.5 However, these methods have several problems, such as the requirement of multisteps to prepare substrates, which is dependent on the electronic properties of substrates, and the need to use excess amounts of oxidants. Although direct synthetic reactions of ketones from aldehydes have recently been developed, it is necessary to use stoichiometric amounts of oxidizing and reducing agents.6 Efficient synthetic reactions of heteroaryl ketones are also limited. Received: February 1, 2018 Revised: March 3, 2018 Published: March 8, 2018

Figure 1. C−H transformations using a picolinamide moiety: (a) as a bidentate directing group and (b) as a bidentate ligand. © XXXX American Chemical Society

3123

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128

Letter

ACS Catalysis Scheme 3. Scope of Aldehydes 1a

Herein, we report the synthesis of diaryl ketones from aldehydes and aryl halides via C−H bond activation using a palladium/picolinamide catalyst. Because various aldehydes and aryl halides are readily available, a variety of aryl ketones can be synthesized using this reaction.



RESULTS AND DISCUSSION We first investigated several picolinamide ligands in the reaction between benzaldehyde 1a and p-iodoanisole 2a in the presence of Pd(OAc)2 and KHCO3 (see Scheme 1). The desired reaction Scheme 1. Investigation of Several Ligands

proceeded with ligand L1 and afforded ketone 3a in 19% yield. The yield of 3a was improved to 66% and 83% using ligands L2 and L3, respectively. The positions of the pyridyl and amide moieties were important to promote the reaction efficiently. In fact, 3a was formed in only 3% yield, using ligand L4 with an amide moiety at the 3-position of the pyridine ring. We confirmed the importance of the picolinamide structure based on the following experiments: the yield of 3a was low when picolinate L5 or amide L6 was used, and iminopyridine L7, diimine L8, bipyridine, pyridine, BINAP, and triphenylphosphine were also ineffective in this reaction. In many reactions, aryl bromides are less reactive, compared with the corresponding aryl iodides. Interestingly, the yield of ketone 3a was slightly higher (89% yield) when using pbromoanisole 4a instead of p-iodoanisole 2a with ligand L3. Furthermore, the yield of 3a was improved by changing the ligand to L2 when using aryl bromide 4a (see Scheme 2).7 Because aryl bromides are more widely available organohalides than aryl iodides, we investigated the substrate scope using aryl bromides.

a Using 4b (3.0 equiv). bA decarbonylated product (anthracene) of aldehyde 1n was also formed in 64% yield.

with an ester group, 1k, proceeded because such substrates are generally difficult to use in ketone synthesis with Grignard reagents.8 Sterically hindered aldehyde 1m also reacted with bromobenzene 4b in 95% yield. The reaction of 2-naphthaldehyde 1m, anthracene-9-carbaldehyde 1n, and pyrene-1-carbaldehyde 1o gave the desired products 3m−3o in 36%−86% yields. The yield of 3n was moderate, because of the decarbonylation of aldehyde 1n to give anthracene. The desired reaction also proceeded using aliphatic aldehydes 1p and 1q, whereas the yields of ketones 3p and 3q were low. We then investigated the substrate scope of aryl bromides (Scheme 4). Aryl bromides 4c−4h with an electron-donating or electron-withdrawing group produced the desired products 3s− 3v in yields of 78%−90%. F, Cl, and Br atoms and functional groups, such as ketone, ester, amide, silyl, thiomethyl, and ether groups, tolerated the present reaction conditions and afforded ketones 3h, 3i, 3v−3z, and 3A−3C, respectively, in yields of 56%−99%. Bromo-substituted ketone 3v was obtained using 4bromoiodobenzene 4k under the optimized conditions, whereas the C−Br bond is also the reactive site. Although it is difficult to synthesize ketones containing a thiomethyl group by oxidizing the corresponding secondary alcohols, because the thiomethyl group is easily oxidized, product 3A was obtained in high yield, using the present method in a single step from commercially available coupling partners. Ketone 3l was produced in moderate yield using ortho-substituted bromobenzene 4s. 1-Bromo- and 2bromonaphthalene (4t and 4u) also reacted with aldehyde 1a to give the corresponding ketones 3D and 3m in yields of 84% and 98%, respectively. Heteroaryl ketones are common structures in drug lead molecules, but few effective methods are available to

Scheme 2. Reaction between Benzaldehyde 1a and Aryl Bromide 4a

We then investigated the substrate scope of aldehydes (Scheme 3). The desired ketones 3a−3k were produced in good to excellent yields, using benzaldehydes with an electrondonating or electron-withdrawing group. Fluorine and chlorine atoms and an ester group were tolerant to the reaction conditions, and the corresponding ketones 3h−3k were produced. It is noteworthy that the desired reaction of aldehyde 3124

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128

Letter

ACS Catalysis Scheme 4. Scope of Aryl Bromides 4a

Scheme 5. Further Investigation of Several Ligands

Scheme 6. Synthesis of Mono(heteroaryl)ketone and Di(heteroaryl)ketonea

a

Using 4 (3.0 equiv). b4-Bromoiodobenzene, Pd(OAc)2 (10 mol %), K2CO3 (2.5 equiv), L2 (20 mol %), tAmylOH (0.50 M), 120 °C.

synthesize them.9 In the present reaction conditions, heteroaryl bromides, such as 4-bromo-1H-pyrazole 4v and 2-bromothiophene 4w were tolerant and transformed into the corresponding heteroaryl ketones (3E and 3F). Examples of the synthesis of bis(heteroaryl)ketone are still rare.9a The pyridyl group-containing ketone 3G was obtained in only 35% yield using ligand L2. Therefore, we investigated ligands to improve the yield of 3N. Screening of substituents on the N atom of the amide moiety did not improve the yield of 3G (ligand L7−L11). Electron density of the pyridyl group gave high influence for the yield of 3G (ligand L12−L18). The yield of 3G was dramatically improved when using ligands with an electron-donating group. Finally, ligand L18 was proved to be the best ligand, and the yield of 3G was improved to 62% (see Scheme 5). We then investigated several heteroaromatic aldehydes and bromides to expand the scope of heteroaryl ketones (see Scheme 6). Ketones with quinolinyl, isoquinolinyl, quinoxalinyl, dihydroindolyl, and carbazolyl group, 3H−3L, were obtained in moderate to good yields. By using ligand L18, di(heteroaryl)ketones 3M−3O were also afforded in good yields. The reaction proceeded in excellent yield, even on a gram scale (see Scheme 7). Treatment of 0.686 g of benzaldehyde 1a with 2bromonaphthalene 4u gave 1.33 g of 2-benzoylnaphthalene 3m in 88% yield.

a

Using 1 (3.0 equiv). b1 (1.0 equiv), 4 (3.0 equiv).

Scheme 7. Gram-Scale Reaction

This reaction was applied to the synthesis of a drug molecule (see Scheme 8). Fenofibrate 6 is a commercial drug that is used to reduce cholesterol levels in patients at risk for cardiovascular disease. Fenofibrate 6 was obtained in 75% yield by the reaction of 4-chlorobenzaldehyde 1i with aryl bromide 5. We considered four possible mechanisms: an insertion pathway and three formyl C−H activation pathways (shown in Figure 2; for details, see the Supporting Information). For the insertion pathway (pathway i, red), the first transition state TS-I2 involves a four-membered intermediate, which is generated by approaching an aldehyde to an aryl-palladium intermediate. The activation barrier for this step is estimated to be 51.3 kcal/mol. TS-I2 is successively converted to IS-I3 (a palladium alkoxide). Then, benzophenone is generated by β-hydride elimination, and the activation barrier for this step is predicted to be 16.6 kcal/ 3125

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128

Letter

ACS Catalysis

activation barrier of this step is calculated to be 15.5 kcal/mol. The next step is the generation of aryl palladium(IV) species ISP7, via oxidative addition of an aryl bromide to an acyl palladium(II) species with the activation barrier of 34.1 kcal/mol. Finally, reductive elimination (TS-P8) gives benzophenone PP9. This process is also highly exothermic and requires small activation energy (10.3 kcal/mol). Pathway iv (green line) is for the generation of ketones P-P11 from the reaction of palladium(II) species IS-P3 and aryl bromides after the proton transfer from the aldehyde to the carbonate group in the square planar complex of Pd(II). This step requires a large activation energy of 29.0 kcal/mol. According to the energy diagram shown in Figure 2, the transition state TS-P4 with the highest energy in pathway iii is lower than the TS-I2 in pathway i for the insertion mechanism, TS-O5 in pathway ii, and TS-P10 in pathway iv for the other C− H activation mechanisms. Therefore, the results of theoretical calculations show that the C−H activation mechanism in pathway iii is more preferable to the others. In addition, as described in Scheme 3, product 3n, which is a decarbonylated product (anthracene) of aldehyde 1n, was formed in 64% yield. This result supports that the reaction proceeded via C−H bond activation.10 Furthermore, the desired reaction did not proceed well, using a catalytic amount of Pd(0) species, such as Pd(dba)2 (3a: 5% yield) and Pd2(dba)3 (3a: 6% yield). These results show that the reaction did not proceed via Pd(0)/Pd(II) catalytic cycle.11 Therefore, we considered the proposed mechanism for the formation of ketones as follows (see Scheme 9):12

Scheme 8. Application to the Synthesis of Fenofibrate

mol. This pathway is totally found to be endergonic, based on these calculations. On the other hand, three possible pathways for the C−H activation mechanism are shown as pathway ii (black line), iii (blue line), and iv (green line). In pathway ii (black line), the abstraction of a H atom of the aldehyde occurs in the octahedral complex (IS-O2, TS-O3, and IS-O4) formed by the coordination of the carbonyl group of an aldehyde to the Pd atom. The activation barrier for this step is estimated to be 2.8 kcal/mol. These three states have similar three-dimensional (3D) structures (see the Supporting Information). The distances of C−H (formyl group)/O−H (between carbonate and the H atom of the formyl group) are 1.10/1.80 Å (for IS-O2), 1.36/ 1.22 Å (for TS-O3), and 1.76/1.02 Å (for IS-O4). The distances clearly showed that the H atom of the formyl group is transferred to the carbonate group. IS-O4 is continuously converted to acyl palladium(IV) species IS-O6, via TS-O5, through the release of HCO3− and the formation of a Pd−C bond. This step is a highly exothermic process and the activation barrier for this step is calculated to be 3.4 kcal/mol. In pathway iii (blue line), the similar proton transfer from the aldehyde to the carbonate group occurs and gives acyl palladium(II) IS-P5, through TS-P4. The

(1) formation of palladium intermediate I from Pd(OAc)2 and ligand L2; (2) formation of intermediate II (R0 in Figure 2) from intermediate I and KHCO3;

Figure 2. Energy diagrams of insertion (pathway i, red) and C−H activation (pathways ii, iii, and iv, black, blue, and green) pathways for the reaction between 1a and 4b. All data were computed using the M06-2X functional. The basis set for Pd atom was LACVP**++, and the basis set for the other atoms was 6-31G**++. 3126

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128

Letter

ACS Catalysis Notes

Scheme 9. Proposed Mechanism

The authors declare no competing financial interest.



ACKNOWLEDGMENTS This work was supported in part by ERATO from JST and JSPS KAKENHI Grant No. JP 26288014. T.W. thanks JSPS for fellowships.



(3) formation of intermediate III (IS-P5 in Figure 2) from intermediate II and aldehyde 1 via C−H bond activation via a concerted metalation-deprotonation (CMD) pathway;13 (4) oxidative addition of aryl bromide 4 to give intermediate IV (IS-P7 in Figure 2); and (5) reductive elimination to give ketone 3 and regenerate intermediate I.14



CONCLUSION In summary, we successfully synthesized ketones from aldehydes and aryl halides via C−H activation under palladium catalysis. The picolinamide ligand played an important role in promoting the reaction. The desired ketones were obtained in good to excellent yields, even in gram-scale, with high functional group tolerance. Heteroaryl ketones could also be synthesized using the reaction. A bioactive compound was synthesized in a few reaction steps. Three possible reaction pathways were considered, but the results of DFT calculations indicated that the reaction proceeded via C−H bond activation of aldehydes and successive oxidative addition of aryl bromides to a palladium-amide intermediate. We hope that the reaction will provide useful insight into C−H transformations and become a useful method for synthesizing ketones with high functional group tolerance.



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acscatal.8b00440. Typical experimental procedure, characterization data for ketones, and results of DFT calculations (PDF)



REFERENCES

(1) For recent reviews on C−H transformations, see: (a) Chen, X.; Engle, K. M.; Wang, D.-H.; Yu, J.-Q. Palladium(II)-Catalyzed C−H Activation/C−C Cross-Coupling Reactions: Versatility and Practicality. Angew. Chem., Int. Ed. 2009, 48, 5094−5115. (b) Davies, H. M. L.; Morton, D. Guiding Principles for Site Selective and Stereoselective Intermolecular C−H Functionalization by Donor/Acceptor Rhodium Carbenes. Chem. Soc. Rev. 2011, 40, 1857−1869. (c) Zhou, M.; Crabtree, R. H. C−H Oxidation by Platinum Group Metal Oxo or Peroxo Species. Chem. Soc. Rev. 2011, 40, 1875−1884. (d) Kuninobu, Y.; Takai, K. Organic Reactions Catalyzed by Rhenium Carbonyl Complexes. Chem. Rev. 2011, 111, 1938−1953. (e) Gutekunst, W. R.; Baran, P. S. C−H Functionalization Logic in Total Synthesis. Chem. Soc. Rev. 2011, 40, 1976−1991. (f) Hartwig, J. F. Regioselectivity of the Borylation of Alkanes and Arenes. Chem. Soc. Rev. 2011, 40, 1992−2002. (g) Colby, D. A.; Tsai, A. S.; Bergman, R. G.; Ellman, J. A. Rhodium Catalyzed Chelation-Assisted C−H Bond Functionalization Reactions. Acc. Chem. Res. 2012, 45, 814−825. (h) Neufeldt, S. R.; Sanford, M. S. Controlling Site Selectivity in Palladium-Catalyzed C−H Bond Functionalization. Acc. Chem. Res. 2012, 45, 936−946. (i) Rouquet, G.; Chatani, N. Catalytic Functionalization of C(sp2)−H and C(sp3)−H Bonds by Using Bidentate Directing Groups. Angew. Chem., Int. Ed. 2013, 52, 11726−11743. (j) Gao, K.; Yoshikai, N. Low-Valent Cobalt Catalysis: New Opportunities for C−H Functionalization. Acc. Chem. Res. 2014, 47, 1208−1219. (k) Song, G.; Li, X. Substrate Activation Strategies in Rhodium(III)-Catalyzed Selective Functionalization of Arenes. Acc. Chem. Res. 2015, 48, 1007−1020. (l) Daugulis, O.; Roane, J.; Tran, L. D. Bidentate, Monoanionic Auxiliary-Directed Functionalization of Carbon−Hydrogen Bonds. Acc. Chem. Res. 2015, 48, 1053− 1064. (m) Kuninobu, Y.; Sueki, S. C−H Bond Transformations Leading to the Synthesis of Organic Functional Materials. Synthesis 2015, 47, 3823−3845. (n) Hartwig, J. F. Evolution of C−H Bond Functionalization from Methane to Methodology. J. Am. Chem. Soc. 2016, 138, 2−24. (o) Moselage, M.; Li, J.; Ackermann, L. Cobalt-Catalyzed C−H Activation. ACS Catal. 2016, 6, 498−525. (p) Jiao, J.; Murakami, K.; Itami, K. Catalytic Methods for Aromatic C−H Amination: An Ideal Strategy for Nitrogen-Based Functional Molecules. ACS Catal. 2016, 6, 610−633. (q) Gensch, T.; Hopkinson, M. N.; Glorius, F.; WencelDelord, J. Mild metal-catalyzed C−H activation: Examples and concepts. Chem. Soc. Rev. 2016, 45, 2900−2936. (2) Zaitsev, V. G.; Shabashov, D.; Daugulis, O. Highly Regioselective Arylation of sp3 C−H Bonds Catalyzed by Palladium Acetate. J. Am. Chem. Soc. 2005, 127, 13154−13155. (3) (a) He, G.; Chen, G. A Practical Strategy for the Structural Diversification of Aliphatic Scaffolds through the Palladium-Catalyzed Picolinamide-Directed Remote Functionalization of Unactivated C(sp3)−H Bonds. Angew. Chem., Int. Ed. 2011, 50, 5192−5196. (b) He, G.; Zhao, Y.; Zhang, S.; Lu, C.; Chen, G. Highly Efficient Syntheses of Azetidines, Pyrrolidines, and Indolines via Palladium Catalyzed Intramolecular Amination of C(sp3)−H and C(sp2)−H Bonds at γ and δ Positions. J. Am. Chem. Soc. 2012, 134, 3−6. (c) Xie, Y.; Yang, Y.; Huang, L.; Zhang, X.; Zhang, Y. Pd-Catalyzed Arylation/Oxidation of Benzylic C−H Bond. Org. Lett. 2012, 14, 1238−1241. (d) Zhang, S.-Y.; He, G.; Zhao, Y.; Wright, K.; Nack, W. A.; Chen, G. Efficient Alkyl Ether Synthesis via Palladium-Catalyzed, Picolinamide-Directed Alkoxylation of Unactivated C(sp3)−H and C(sp2)−H Bonds at Remote Positions. J. Am. Chem. Soc. 2012, 134, 7313−7316. (e) Zhang, S.-Y.; He, G.; Nack, W. A.; Zhao, Y.; Li, Q.; Chen, G. Palladium-Catalyzed PicolinamideDirected Alkylation of Unactivated C(sp3)−H Bonds with Alkyl Iodides. J. Am. Chem. Soc. 2013, 135, 2124−2127. (f) Roman, D. S.;

AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected] (Y. Kuninobu). *E-mail: [email protected] (M. Kanai). ORCID

Yoichiro Kuninobu: 0000-0002-8679-9487 Motomu Kanai: 0000-0003-1977-7648 3127

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128

Letter

ACS Catalysis

Radical Initiator. Tetrahedron Lett. 2015, 56, 4211−4214. (g) Suchand, B.; Satyanarayana, G. Palladium-Catalyzed Environmentally Benign Acylation. J. Org. Chem. 2016, 81, 6409−6423. (g) Zhang, X.; MacMillan, D. W. C. Direct Aldehyde C−H Arylation and Alkylation via the Combination of Nickel, Hydrogen Atom Transfer, and Photoredox Catalysis. J. Am. Chem. Soc. 2017, 139, 11353−11356. (h) Vandavasi, J. K.; Hua, X.; Halima, H. B.; Newman, S. G. A NickelCatalyzed Carbonyl−Heck Reaction. Angew. Chem., Int. Ed. 2017, 56, 15441−15445. For several examples of the synthesis of ketones from aldehydes via C−H bond activation with a directing group, see: (i) Satoh, T.; Itaya, T.; Miura, M.; Nomura, M. Palladium-Catalyzed Coupling Reaction of Salicylaldehydes with Aryl Iodides via Cleavage of the Aldehyde C−H Bond. Chem. Lett. 1996, 25, 823−824. (j) Ko, S.; Kang, B.; Chang, S. Cooperative Catalysis by Ru and Pd for the Direct Coupling of a Chelating Aldehyde with Iodoarenes or Organostannanes. Angew. Chem., Int. Ed. 2005, 44, 455−457. (k) Whittaker, A. M.; Dong, V. M. Nickel-Catalyzed Dehydrogenative Cross-Coupling: Direct Transformation of Aldehydes into Esters and Amides. Angew. Chem., Int. Ed. 2015, 54, 1312−1315. (l) Nowrouzi, N.; Motevalli, S.; Tarokh, D. J. Mol. Catal. A: Chem. 2015, 396, 224−230. (m) Rao, M. L. N.; Ramakrishna, B. S. Rhodium-Catalyzed Directing-Group-Assisted Aldehydic C−H Arylations with Aryl Halides. Eur. J. Org. Chem. 2017, 2017, 5080−5093. (7) The reaction with 1.2 equiv amount of 4a gave the product in 88% yield. However some aryl bromides gave the corresponding ketones in moderate yields. We decided to investigate the scope of aldehydes and aryl bromides using 3 equiv amount of aryl bromides. (8) Crawford, J. J.; Henderson, K. W.; Kerr, W. J. Direct and Efficient One-Pot Preparation of Ketones from Aldehydes Using N-tertButylphenylsulfinimidoyl Chloride. Org. Lett. 2006, 8, 5073−5076. (9) (a) Toh, Q. Y.; Mcnally, A.; Vera, S.; Erdmann, N.; Gaunt, M. J. Organocatalytic C−H Bond Arylation of Aldehydes to Bis-heteroaryl Ketones. J. Am. Chem. Soc. 2013, 135, 3772−3775. (b) Demkiw, K.; Araki, H.; Elliott, E.; Franklin, C. L.; Fukuzumi, Y.; Hicks, F.; Hosoi, K.; Hukui, T.; Ishimaru, Y.; O’Brien, E.; Omori, Y.; Mineno, M.; Mizufune, H.; Sawada, N.; Sawai, Y.; Zhu, L. A Nitrogen-Assisted One-Pot Heteroaryl Ketone Synthesis from Carboxylic Acids and Heteroaryl Halides. J. Org. Chem. 2016, 81, 3447−3456. (10) (a) Whittaker, A. M.; Dong, V. M. Nickel-Catalyzed Dehydrogenative Cross-Couling: Direct Transformation of Aldehydes into Esters and Amides. Angew. Chem., Int. Ed. 2015, 54, 1312−1315. (b) Modak, A.; Rana, S.; Phukan, A. K.; Maiti, D. Palladium-Catalyzed Deformylation Reactions with Detailed Experimental and In Silico Mechanistic Studies. Eur. J. Org. Chem. 2017, 2017, 4168−4174. (11) Almost all Pd(II)-catalyzed C-H activation reactions using a bidentate directing group proceeded via the formation of Pd(IV) intermediate: (a) Tremont, S. J.; Rahman, H. U. Ortho-alkylation of acetanilides using alkyl halides and palladium acetate. J. Am. Chem. Soc. 1984, 106, 5759−5760. (b) Catellani, M.; Motti, E.; Della Cá, N.; Ferraccioli, R. Recent Developments in Catalytic Aryl Coupling Reactions. Eur. J. Org. Chem. 2007, 2007, 4153−4165. (c) Topczewski, J. J.; Sanford, M. S. Carbon−hydrogen (C−H) bond activation at Pd(IV): A Frontier in C−H functionalization catalysis. Chem. Sci. 2015, 6, 70−76 (also see ref 3). (12) For the results of DFT calculations, see the Supporting Information. (13) (a) Gou, Q.; Deng, B.; Qin, J. Palladium-Catalyzed Arylation of (Di)azinyl Aldoxime Ethers by Aryl Iodides: Stereoselective Synthesis of Unsymmetrical (E)-(Di)azinylaryl Ketoxime Ethers. Chem.Eur. J. 2015, 21, 12586−12591. (b) Yu, Y.; Lu, Q.; Chen, G.; Li, C.; Huang, X. Palladium-Catalyzed Intermolecular Acylation of Aryl Diazoesters with ortho-Bromobenzaldehydes. Angew. Chem., Int. Ed. 2018, 57, 319−323. (14) Tatamidani, H.; Kakiuchi, F.; Chatani, N. A New Ketone Synthesis by Palladium-Catalyzed Cross-Coupling Reactions of Esters with Organoboron Compounds. Org. Lett. 2004, 6, 3597−3599.

Charette, A. B. C−H Functionalization of Cyclopropanes: A Practical Approach Employing a Picolinamide Auxiliary. Org. Lett. 2013, 15, 4394−4397. (g) Nadres, E. T.; Santos, G. I. F.; Shabashov, D.; Daugulis, O. Scope and Limitations of Auxiliary-Assisted, Palladium-Catalyzed Arylation and Alkylation of sp2 and sp3 C−H Bonds. J. Org. Chem. 2013, 78, 9689−9714. (h) Ju, L.; Yao, J.; Wu, Z.; Liu, Z.; Zhang, Y. PalladiumCatalyzed Oxidative Acetoxylation of Benzylic C−H Bond Using Bidentate Auxiliary. J. Org. Chem. 2013, 78, 10821−10831. (i) Tran, L. D.; Roane, J.; Daugulis, O. Directed Amination of Non-Acidic Arene C− H Bonds by a Copper−Silver Catalytic System. Angew. Chem., Int. Ed. 2013, 52, 6043−6046. (j) Cheng, T.; Yin, W.; Zhang, Y.; Zhang, Y.; Huang, Y. Palladium Catalyzed Acetoxylation of Benzylic C−H Bonds using a Bidentate Picolinamide Directing Group. Org. Biomol. Chem. 2014, 12, 1405−1411. (k) Seki, A.; Takahashi, Y.; Miyake, T. Synthesis of cis-3-Arylated Cycloalkylamines through Palladium-Catalyzed Methylene sp3 Carbon−Hydrogen Bond Activation. Tetrahedron Lett. 2014, 55, 2838−2841. (l) Li, Q.; Zhang, S.-Y.; He, G.; Nack, W. A.; Chen, G. Palladium-Catalyzed Picolinamide-Directed Acetoxylation of Unactivated γ-C(sp3)−H Bonds of Alkylamines. Adv. Synth. Catal. 2014, 356, 1544−1548. (m) Wang, Z.; Ni, Y.; Kuninobu, Y.; Kanai, M. Copper-Catalyzed Intramolecular C(sp3)−H and C(sp2)−H Amidation by Oxidative Cyclization. Angew. Chem., Int. Ed. 2014, 53, 3496−3499. (n) Kanyiva, K. S.; Kuninobu, Y.; Kanai, M. Palladium-Catalyzed Direct C−H Silylation and Germanylation of Benzamides and Carboxamides. Org. Lett. 2014, 16, 1968−1971. (o) Cui, W.; Chen, S.; Wu, J.-Q.; Zhao, X.; Hu, W.; Wang, H. Palladium-Catalyzed Remote C(sp3)−H Arylation of 3-Pinanamine. Org. Lett. 2014, 16, 4288−4291. (p) Zhang, L.-S.; Chen, G.; Wang, X.; Guo, Q.-Y.; Zhang, X.-S.; Pan, F.; Chen, K.; Shi, Z.-J. Direct Borylation of Primary C−H Bonds in Functionalized Molecules by Palladium Catalysis. Angew. Chem., Int. Ed. 2014, 53, 3899−3903. (q) Martinez, A. M.; Rodriguez, N.; Arrayas, R. G.; Carretero, J. C. Copper-Catalyzed ortho-C−H Amination of Protected Anilines with Secondary Amines. Chem. Commun. 2014, 50, 2801−2803. (r) Wang, Z.; Kuninobu, Y.; Kanai, M. Copper-Mediated Direct C(sp3)−H and C(sp2)−H Acetoxylation. Org. Lett. 2014, 16, 4790−4793. (4) For copper-catalyzed formation of aryl ethers using picolinamide ligands, see: Sambiagio, C.; Munday, R. H.; Marsden, S. P.; Blacker, A. J.; McGowan, P. C. Picolinamides as Effective Ligands for CopperCatalysed Aryl Ether Formation: Structure−Activity Relationships, Substrate Scope and Mechanistic Investigations. Chem.Eur. J. 2014, 20, 17606−17615. (5) (a) Dieter, R. K. Reaction of Acyl Chlorides with Organometallic Reagents: A Banquet Table of Metals for Ketone Synthesis. Tetrahedron 1999, 55, 4177−4236. (b) Sibi, M. P. Chemistry of N-Methoxy-NMethylamides. Applications in Synthesis. A Review. Org. Prep. Proced. Int. 1993, 25, 15−40. (c) O’Neill, B. T. In Comprehensive Organic Synthesis (Nucleophilic Addition to Carboxylic Acid Derivatives); Trost, B. M., Fleming, I., Eds.; Pergamon Press: Oxford, U.K., 1991; Vol. 1, pp 397−458. (6) For several examples of the synthesis of ketones from aldehydes, see: (a) Ishiyama, T.; Hartwig, J. A Heck-Type Reaction Involving Carbon−Heteroatom Double Bonds. Rhodium(I)-Catalyzed Coupling of Aryl Halides with N-Pyrazyl Aldimines. J. Am. Chem. Soc. 2000, 122, 12043. (b) Huang, Y.-C.; Majumdar, K. K.; Cheng, C.-H. NickelCatalyzed Coupling of Aryl Iodides with Aromatic Aldehydes: Chemoselective Synthesis of Ketones. J. Org. Chem. 2002, 67, 1682− 1684. (c) Pucheault, M.; Darses, S.; Genet, J.-P. Direct Access to Ketones from Aldehydes via Rhodium-Catalyzed Cross-Coupling Reaction with Potassium Trifluoro(organo)borates. J. Am. Chem. Soc. 2004, 126, 15356−15357. (d) Ruan, J.; Saidi, O.; Iggo, J. A.; Xiao, J. Direct Acylation of Aryl Bromides with Aldehydes by Palladium Catalysis. J. Am. Chem. Soc. 2008, 130, 10510−10511. (e) Tang, B.-X.; Song, R.-J.; Wu, C.-Y.; Liu, Y.; Zhou, M.-B.; Wei, W.-T.; Deng, G.-B.; Yin, D.-L.; Li, J.-H. Copper-Catalyzed Intramolecular C−H Oxidation/ Acylation of Formyl-N-arylformamides Leading to Indoline-2,3-diones. J. Am. Chem. Soc. 2010, 132, 8900−8902. (f) Tripathi, S.; Singh, S. N.; Yadav, L. D. S. Metal-Free Efficient Cross Coupling of Aromatic Aldehydes with Aryldiazonium tetrafluoroborates using DTBP as a 3128

DOI: 10.1021/acscatal.8b00440 ACS Catal. 2018, 8, 3123−3128