Phenyl 2-(trimethylsilyl)ethynyl sulfone as a new vinyl cation synthon

Note: In lieu of an abstract, this is the article's first page. Click to increase image size Free first page. View: PDF. Citing Articles; Related Cont...
0 downloads 0 Views 663KB Size
J. Org. Chem. 1982,47, 4713-4717

4713

Phenyl 2-(Trimethylsily1)ethynyl Sulfone as a New Vinyl Cation Synthon Takeshi Ohnuma, Noriaki Hata, Hiroyuki Fujiwara, and Yoshio Ban* Faculty of Pharmaceutical Sciences, Hokkaido University, Sapporo, 060 J a p a n Received A p r i l 5, 1982

Phenyl 2-(trimethylsilyl)ethynyl sulfone (PhSOzC=CSiMe3, 1) is provided as a new vinyl cation synthon for an efficient introduction of the vinyl group to a variety of carbanionic nucleophiles (see Table I), including a highly hindered one, 29, an important precursor for the synthesis of Aspidosperma alkaloids. Another attractive feature of this reagent, which can be easily prepared in a large scale, is particularly demonstrated by its utility under rather strong basic conditions such as NaH, t-BuOK, KF, etc.

The efficient introduction of a vinyl substituent to the a-carbon of various carbonyl groups is an urgent need of organic synthesis, since such vinyl products are available as valuable precursors for Cope and oxy-Cope rearrangementa. These methods could be further applicable to the synthesis of the medium-sized ring system1 and, moreover, could be extended to the synthesis of many natural products having vinyl substituents. Recently, a number of vinylation methods of enolizable compounds have been developed by several group^.^^^ We report here on the utility of remarkably reactive phenyl 2-(trimethylsily1)ethynyl sulfone (1, PTES),4which is readily available in PhS02C=CSiMe3 = “C=C+” 1 large amounts, as a vinyl cation equivalent for vinylation at the a-carbon of carbonyl groups. The general outline for the introduction of a vinyl group into the anion 2 is shown in Scheme I, where the Michael reaction of PTES with 2 under mild basic conditions proceeded smoothly to afford the silyl intermediate 3, which without isolation was immediately treated with acetic acid to yield the vinyl sulfone 4. Depending upon the substrate 2, two procedures for desulfurization of the vinyl sulfones 4 were necessary for generation of 6. Namely, with diesters 8 and 11, diketone 26, and enone 30, the direct desulfurization method classified as “method A” was available, in which the sulfone 4 was treated with aluminum amalgam at room temperature5 to afford the vinyl products 6 (see Table I). How(1)(a) Rhoads, S.J.; Raulins, N. R. Org. React. 1975,22,l. (b) Bruhn, J.; Heimgartner, H.; Schmid, H. Helu. Chim. Acta 1979,62,2630. (2)(a) Oishi, T.; Takechi, H.; Ban, Y. Tetrahedron Lett. 1974,3757. (b) Koppel, G. A.; Kinnick, M. D. J . Chem. SOC.,Chem. Commun. 1975, 473. (c) Metcalf, B.W.; Bonilavri, E. J. Ibid. 1978,914.(d) Hori, I.; Oishi, T. Tetrahedron Lett. 1979,4087. (e) Steglich, W.; Wegmann, H. Synthesis 1980,481. (f)Chang, T. c. T.; Rosenblum, M.; Samuels, S. B. J . Am. Chem. SOC. 1980,102,5930. (8) Kowalski, C. J.; Dung, J.-S. Ibid. 1980,102,7950. (h) Clive, D.L. J.; Russel, C. G. J . Chem. SOC.,Chem. Commun. 1981,434.(i) Hudrlik, P. F.; Kulkami, A. K. J. Am. Chem. SOC. 1981,103,6251.6)Kende, A. S.; Fludzinski, P. Tetrahedron Lett. 1982, 2373. (3)The following examples were effected by direct vinylation a t the a-carbon of carbonyl groups by utilizing organometallic complexes. (a) Millard, A. A.; Rathke, M. W. J. Am. Chem. SOC.1977,99,4833. (b) Hegedus, L.S.; Williams, R. E.; McGuire, M. A.; Hayashi, T. Ibid. 1980, 102,4973. (4)Bhattacharya, S. N.; Josiah, B. M.; Walton, D. R. M. Organomet. Chem. Synth. 1971,I, 145. According to the literature, the reaction of commercially available bis(trimethylsily1)acetylene with preformed benzenesulfonyl chloride-aluminum chloride complex was carried out in methylene chloride a t room temperature to furnish PTES [65% yield, slightly hygroscopic colorless crystals (mp 64-65 “C) from petroleum ether]. P T E S is very sensitive to alkaline or acidic conditions which generate ethynyl phenyl sulfone (PhSO,C=CH). (5)(a) Pascali, V.;Umani-Ronchi, A. J. Chem. SOC.,Chem. Commun. 1973,351. (b) Corey, E.J.; Chaykovsky, M. J . Am. Chem: SOC.1965,87, 1345.

ever, with @-ketoesters (14, 18, and 22), the above direct desulfurization gave the unidentified products instead of the desired 6.6 Therefore, in these cases, the sulfones 4 were first converted into the masked cyanohydrins by treatment with trimethylsilyl cyanide (Me3SiCN), and these were easily desulfurized with aluminum amalgam to give the compounds 5. The silyl products 5 were then deprotected by using silver fluoride to furnish the final vinyl derivatives 6 (except 15). This indirect desulfurization procedure is designated as “method B” (see Table I). As a representative example of method A, addition of PTES (1.1 equiv) to the diester 7 with a catalytic amount of sodium hydride in THF-Me2S0 (1O:l) at -80 “C gave exclusively the 2 isomer 8 (80% yield) after purification by silica gel chromatography.’ Desulfurization of 8 was conducted by aluminum amalgam in 5% aq CH3CN to afford 9s3g(81%) as a colorless oil. In a typical procedure (i.e., method B), the keto group of the Michael adduct 18 was protected with trimethylsilyl cyanide (5 equiv) in the presence of a catalytic amount of ZnI, in CHzClzto afford the cyanosilylated product,’O* which was readily desulfurized with aluminum amalgam to give 19. Removal of the cyanosilyl group from 19 proceeded instantaneously on treatment with silver fluoride (1equiv)’Ob in THF-H20 (101) at 40 “C to generate the @-ketoester 20. Treatment of 15 with silver fluoride under the same reaction conditions as described above produced ethyl tiglate (16), accompanied by elimination of acetaldehyde silylhydrin. The expected ethyl 2-methyl-2-vinylacetoacetate was not detected. Compound 18 was treated with a large excess of triethyl orthoformate in ethanol under acidic conditions to give the ring-opened product 32 as a mixture of olefinic isomers. Desulfurization with aluminum amalgam furnished diethyl 2-vinyladipate (33) and its isomer 34 (7:3 by ‘HNMR (6)The following reductions of 14 were examined lithium-ethylamine and potassium-graphite. (Savoia, D.; Trombini, C.; Umani-Ronchi, A. J . Chem. SOC.,Perkin Trans. 1 1977,123);sodium amalgam (Trost, B. M.; Arndt, H.-C.; Strege, P. E.; Verhoeven, T. R. Tetrahedron Lett. 1976, 3477);sodium-naphthalene (Clossen, W. D.; Wriede, P.; Bank, S. J. Am. Chem. SOC. 1966,88,1581). All of them resulted in failure. (7)The yields of the Michael adducts are dependent upon the dropping rate of PTES into the reaction solution. Therefore, the solution of PTES was slowly added dropwise to the anions over a period of 1 h in all of the present work. (8)Heyl, D.; Cope, A. C. J . Am. Chem. SOC.1943,65,669.The a-vinylation method for the carbonyl group was first reported, with 1,2-dibromoethylene being used. (9)T o confirm this structure, hydrogenation of 9 was carried out to give ethyl malonate. (10)(a) Evans, D. A.; Truesdale, L. K.; Carroll, G. L. J . Chem. SOC., Chem. Commun. 1973,55. (b) Evans, D.A,; Hoffman, J. M.; Truesdale, L. K. J . A m . Chem. SOC.1973,95,5822. (11)Compound 12 was rearranged on heating at 170 “C into ethyl 4-pentenylidenemal~nate.~

0022-326318211947-4713$01.25/0 0 1982 American Chemical Society

4714

Ohnuma et al.

J. Org. Chem., Vol. 47, No. 24, 1982

R3

'4

Table I a

substrate

vinyl sulfone of the general formula 4 (7% yield, E / Z ratio)

silylcyanohydrin of the general formula 5 or hydroxy ketone (yield, %)

final product (yield, %)

EtCH(CO,Et),

desulfurization method A

7 9 (8l)g

8 (80, 0 : l O O )

10

z/ 12" (70)g

11 (93, 1 : 5 ) d Mess10 C N

COZEt

COzEt S02Ph

13

14 (73, 0:lOO)

15 (66) f,a Me350

&

A

=/\ClC02Etlz

rCHlCOiEtli

k 3dsc2p (cjiz

Y

B

C02Et

16 (77) 0

B

CO2Et

CCZE'

SOZPh

17

18 (85,1 : 8 ) e 0

6

C02Me

21

Me3Si0

C02Me

CCzMe

22 (79, 1 : 7 ) "

4+

23 (74) fsg

20 (82)h

B

i.-

C0zMe

24(85)h

3

A

SOzPh

26 (51, O : l O O ) d

25

19 (73) f , g

27 ( 4 7 ) g

0

0

&

A

Ts l e

TS

2912

Ts

30 (74, l : l ) c

31 ( 4 1 ) g The ratio of E The table indicates the isolated yields of all products after purification by silica gel chromatography. t-BuOK/THF-Me2SO/-80 "C and Z isomers was determined by the integration of olefinic protons in the NMR spectrum. -+ room temperature. NaH/THF/-80 "C room temperature. e KF/18-crown-6 catalyst/-80 "C. fMe,SiCN/ZnI, AgF/10% aqueous THF/40 catalyst/CH,Cl,/room temperature. g Al( Hg)/2% aqueous THF/O "C room temperature. "C. * PCC/CH,Cl,/room temperature. a

--f

--f

spectrum) in 90% overall yield from 18 (Scheme 11). The Michael addition of @-diketone25 with 1 gave only the 2 isomer 26, whose desulfurization was performed by aluminum amalgam to give the hydroxy ketone 27. This

hydroxy ketone was converted into the vinyl diketone 28 by PCC oxidation. Finally, the pentacyclic enone 29 which was synthesized in this laboratory12 as a versatile intermediate for the

J. Org. Chem., Vol. 47,No. 24, 1982

Phenyl 2-(Trimethylsily1)ethynylSulfone Scheme I1

H+

S02Ph

C C O 2 E t

+

f'C02Et

synthesis of Aspidosperma alkaloids, was reacted with 1, affording the vinyl sulfone 30 as a 1:l mixture of E a n d Z isomers. Desulfurization of 30 was directly accomplished b y aluminum amalgam to give the vinyl ketone 31 in a moderate yield accompanied by reduction at the C(2)-C(3) olefinic bond. Thus, it is apparent that PTES (1) is extremely reactive as a convenient reagent for vinylation of various enolizable compounds (Scheme I) in high or moderate overall yields (Table 1). It is also noteworthy that the reagent 1 can be used for Michael reactions under basic conditions (e.g., NaH,t-BuOK, or KF), which is often not the case for t h e other vinylating reagents. Studies are in progress to apply this method t o other carbonyl systems, where Cope or oxy-Cope rearrangements would lead to the synthesis of natural products. Experimental Section General Procedure for Michael Addition of Substrates (7, 10, 13,25) with Sodium Hydride as Base. Into a stirred suspension of sodium hydride (0.6 equiv, 50% oil dispersion prewashed with n-pentane under argon) in dry THF was added the substrate in dry THF under argon at room temperature. After the mixture was stirred at room temperature for 1h, the reaction vessel was cooled to -80 "C. Then, the solution of PTES4 (1.1 equiv) in dry THF was slowly added dropwise over a period of 1h. The reaction mixture was allowed to stand at -80 "C under an argon balloon for 2-4 h and subsequently at room temperature overnight. After the reaction mixture was acidified with glacial acetic acid, the solvent was concentrated in vacuo to give the oily residue which was diluted with CH2C12,washed with water, and dried over MgSO,. Evaporation of the solvent in vacuo gave the crude product, which was chromatographed on a silica gel column or a preparative-layer plate. Diethyl Ethyl[ (2)-2-(phenylsulfonyl)viny1]malonate(8). Addition of PTES (74 mg, 0.31 mmol) in dry THF (10 mL) to diethyl ethylmalonate (7; 53 mg, 0.28 mmol) in dry THF (5 mL) with 50% sodium hydride (8 mg, 0.17 mmol) in dry THF (5 mL) gave the 2 isomer 8 (80 mg, 80%) as a colorless oil after silica gel preparative chromatography [CH2C12-n-hexane(2:l)I: 'H NMR (CDC13) 6 0.89 (t, 3, J = 7 Hz), 1.29 (t, 6, J = 7 Hz), 2.50 (q,2, J = 7 Hz), 4.27 (q,4, J = 7 Hz), 6.32 (d, 1, J = 12 Hz), 6.98 (d, 1,J = 12 Hz), 7.5-8.1 (m, 5); IR (neat) 1730,1610,1310,1150 cm-'; mass spectrum, m / e 309 (M' - 4.9, 213 (base peak). Diethyl Allyl[2-(phenylsulfonyl)vinyl]malonate (11). Addition of PTES (281 mg, 1.18 mmol) in dry THF (10 mL) to diethyl allylmalonate (10; 210 mg, 1.05 mmol) in dry THF (10 mL) with 50% sodium hydride (33 mg, 0.68 mmol) in dry THF (5 mL) gave the E isomer (58 mg, 15%; colorless oil) and the 2 isomer (301 mg, 78%; colorless oil) after separation by silica gel column chromatography [CH2C12-n-hexane(25:l)I. For the E isomer: 'H NMR (CC14)6 1.22 (t, 6, J = 7 Hz), 2.74 (d, 2, J = 7 Hz), 4.18 (q,4, J = 7 Hz), 4.9-5.7 (m, 3), 6.36 (d, 1,J = 16 Hz), 7.16 (d, 1, J = 16 Hz), 7.4-8.0 (m, 5); IR (neat) 1735,1635, 1620, 1315,1140 cm-'; mass spectrum, m / e 366 (M'), 225 (base peak). For the 2 isomer: 'H NMR (CC14)6 1.30 (t,6, J = 7 Hz), 3.13 (d, (12)Ban, Y.;Ounuma, T.; Nagai, M.;Sendo, Y . ;Oiahi, T.Tetrahedron Lett. 1972, 5023.

4715

2, J = 7 Hz), 4.24 (9, 4, J = 7 Hz), 4.9-5.8 (m, 31, 6.20 (d, 1, J = 12 Hz), 6.81 (d, 1,J = 12 Hz), 7.5-8.0 (m, 5); IR (neat) 1735, 1635,1620,1315, 1140 cm-'; mass spectrum, m / e 366 (M') 225 (base peak). Ethyl 2-Methyl-3-oxo-2-[(Z)-2-(phenylsulfonyl)vinyl]butanoate (14). Addition of PTES (2.00 g, 8.38 mmol) in dry THF (25 mL) to ethyl 2-methylacetoacetate (13; 1.00 g, 6.94 mmol) in dry THF (10 mL) with 50%sodium hydride (267 mg, 5.54 mmol) in dry THF (5 mL) gave the 2 isomer 14 (1.57 g, 73%) as a colorless oil after silica gel column chromatography [AcOEt-nhexane (2:1)]: 'H NMR (CCl,) 6 1.31 (t,3, J = 7 Hz), 1.78 (s, 3), 2.33 ( 8 , 3), 4.25 (4, 2, J = 7 Hz), 6.14 (d, 1,J = 12 Hz), 6.86 (d, 1,J = 12 Hz), 7.4-8.0 (m, 5); IR (neat) 1730, 1710, 1615, 1300, 1130 cm-'; mass spectrum, m / e 268 (M' - 42),99 (base peak). 2-Methyl-2-[ (Z)-2-(phenylsulfonyl)vinyl]-1,3-cyclopentanedione (26). Addition of PTES (4.46 g, 18.7 mmol) in (25; 1.75 g, dry THF (40 mL) to 2-methyl-l,3-~yclopentanedione 15.6 mmol) in dry THF (60 mL) with 50% sodium hydride (600 mg, 12.5 mmol) in dry THF (20 mL) at room temperature for 2 days and then at 50 "C for 1day gave 26 (2.21 g, 51%) as colorless crystals after silica gel column chromatography [AcOEt-n-hexane (l:l)]: mp 164-165 "C (AcOEt-n-hexane); 'H NMR (CDC13) 6 1.51 (s, 3), 2.98 (s, 4), 6.11 (d, 1,J = 12 Hz), 6.38 (d, 1, J = 12 Hz), 7.4-8.0 (m, 5); IR (Nujol) 1720,1610,1290,1140 cm-'; mass spectrum, m / e 278 (M'), 109 (base peak). Anal. Calcd for C14H1404S: C, 60.42; H, 5.07; S, 11.52. Found: C, 60.27, H, 5.01; S, 11.61. General Procedure for Michael Addition of Substrates (17,21) with Potassium Fluoride as Base. To a stirred solution of the substrate in dry THF were added anhydrous potassium fluoride (0.6 equiv) and a chip of 18-crown-6ether at room temperature under argon. After stirring at room temperature for 1 h, the reaction vessel was cooled to -50 "C. Then, the solution of PTES (1.1equiv) in dry THF was slowly added dropwise over a period of 1 h. The reaction mixture was allowed to stand at -50 "C for 2 h and subsequently at room temperature overnight. After the reaction mixture was quenched with glacial acetic acid, the solvent was concentrated in vacuo to give the crude product, which was chromatographed on a silica gel column to separate the E and 2 isomers. Ethyl 2-Oxo-l-[2-(phenylsulfonyl)vinyl]cyclopentanecarboxylate (18). Addition of PTES (1.26 g, 5.3 mmol) in dry THF (30 mL) to ethyl 2-oxo-cyclopentanecarboxylate(17; 753 mg, 4.8 mmol) in dry THF (20 mL) with anhydrous potassium fluoride (168 mg, 2.9 mmol) and a chip of 18-crown-6ether gave a mixture of E and 2 isomers 18 (1:8 by 'H NMR spectrum) as a colorless oil (1.33 g, 85%) after silica gel column chromatography [CH2C12-EtOH(301)]. A part of this oil was further separated on a silica gel preparative-layer plate [CH2C12-n-hexane(2:1)] to give the pure E and 2 isomers, respectively. For the E isomer 18: 'H NMR (CC14)b 1.18 (t, 3, J = 7 Hz), 1.8-2.7 (m, 6), 4.10 (9, 2, J = 7 Hz), 6.44 (d, 1, J = 16 Hz), 7.00 (d, 1, J = 16 Hz), 7.4-8.0 (m, 5); IR (neat) 1755, 1725, 1615, 1310, 1140 cm-'; mass spectrum, m / e 322 (M+), 181. For the 2 isomer 18: 'H NMR (CCl,) 6 1.26 (t,3, J = 7 Hz), 1.9-2.8 (m, 6), 4.18 (4, 2, J = 7 Hz), 6.11 (d, 1, J = 12 Hz), 6.70 (d, 1. J = 1 2 Hz), 7.4-8.0 (m, 5); IR (neat) 1755,1725,1620,1305,1140cm-'; mass spectrum, m / e 322 (M'), 181. Methyl 2-Oxo-1-[2-(phenylsulfonyl)vinyl]cyclohexanecarboxylate (22). Addition of PTES (597 mg, 2.51 mmol) to gave methyl 2-oxocyclohexanecarboxylate(21; 357 mg, 2.28 "01) a mixture of E and 2 isomers (1:7 by 'H NMR spectrum) as a colorless oil (595 mg, 81%) after silica gel column chromatography [Et20-n-hexane (1:2)]. A part of this oil was further separated on a silica gel preparative-layer plate [CH2Cl2-n-hexane(2:l)l to give the pure E and 2 isomers, respectively. For the E isomer 22: 'H NMR (CC14)6 1.5-2.7 (m, 8), 3.73 (s, 3), 6.40 (d, 1,J = 16 Hz), 7.21 (d, 1,J = 16 Hz), 7.4-8.0 (m, 5); IR (neat) 1745,1710, 1615,1310,1140cm-'; mass spectrum, m / e 322 (M'), 181. For the 2 isomer 22: 'H NMR (CC14)6 1.6-2.8 (m, 8), 3.75 (s, 3), 6.12 (d, 1, J = 1 2 Hz), 6.62 (d, 1, J = 12 Hz), 7.4-8.0 (m, 5 ) ; mass spectrum, m / e 322 (M'), 181. A2,Azo-N-Tosyl-4,8-dioxo-2 1-(phenylsulfony1)aspidospermidine (30). To a stirred solution of the enone 2912(81 mg, 0.19 mmol) in dry THF (5 mL)-Me2S0 (1mL) at -80 "C under argon was added 1.3 mL of a 0.1 M solution of KO-t-bu in dry t-

4716

J. Org. Chem., Vol. 47, No. 24, 1982

BuOH-THF (1:4), and the mixture was allowed to stand at -80 "C for 1 h. After a solution of PTES (53 mg, 0.22 mmol) in dry THF (7 mL) was slowly added dropwise over a period of 1 h, the cooling bath was removed and the reaction mixture was stirred at room temperature overnight. The reaction mixture was acidified with glacial acetic acid, concentrated in vacuo, and diluted with CH2C12. The organic layer was washed with water and dried over MgSO,, and evaporation of the solvent in vacuo gave the crude oil which was purified on a silica gel column chromatography to give a 1:l mixture (by 'H NMR spectrum) of E and 2 isomers 30 as a brown oil: 83 mg (74%); 'H NMR (CDCl,) 6 1.4-4.0 (m, 8), 2.30 and 2.36 (each s, 3), 4.21 and 5.14 (each s, l), 5.33 (d, 0.5, J = 12 Hz), 6.00 (d, 0.5, J = 15 Hz), 5.67 (d, 0.5, J = 12 Hz), 6.53 (d, 0.5, J = 15 Hz), 6.48 and 6.54 (each s, l),7.0-8.2 (m, 13); IR (CHC1,) 1660,1640,1375,1170cm-'; mass spectrum, m / e 434 (M' - 166). General Desulfurization Method A. Aluminum amalgam was prepared from aluminum foil and 2% aqueous HgC1, according to the Corey's method.5b To a solution of the vinyl sulfone (8, 11,26, or 30) in 2% aqueous THF or 5% aqueous CH3CN at 0 "C under argon was added aluminum amalgam, and the mixture was stirred vigorously at room temperature under an argon balloon for 2 days. The reaction mixture was filtered with suction to remove the inorganic solids and washed with EhO or CH2C12 The combined filtrates were washed with brine, dried over MgSO,, and evaporated in vacuo to give the crude oil which was chromatographed on a silica gel column or a preparative-layer plate. Diethyl Ethylvinylmalonate (9). A solution of the sulfone 8 (57 mg, 0.16 mmol) in 5% aqueous CH3CN (20 mL) was submitted to desulfurization with aluminum amalgam (aluminum, 200 mg, 7.4 "01). The crude oil was chromatographed on a silica gel preparative-layer plate [ CH2C12-n-hexane(2:1)], which gave 9 as a colorless oil: 28 mg (81%);'H NMR (CCl,) 6 0.82 (t, 3, J = 7 Hz), 1.25 (t,6, J = 7 Hz), 2.01 (q, 2, J = 7 Hz), 4.16 (q, 4, J = 7 Hz), 5.16 (d, 1,J = 17 Hz), 5.23 (d, 1,J = 10 Hz),6.30 (dd, 1, J = 10,17 Hz); IR (neat) 1730,1635 cm-'; mass spectrum, m / e 214 (M'), 149 (base peak). Diethyl Allylvinylmalonate (12). A solution of the sulfone 11 (113 mg, 0.31 mmol) in 2% aqueous THF (30 mL) was desulfurized with aluminum amalgam (aluminum, 590 mg, 21.9 mmol). Purification on a silica gel preparative-layer plate [CH2C12-n-hexane(41)] gave 12 as a colorless oil: 49 mg (70%); 'H NMR (CC1.J 6 1.24 (t, 6, J = 7 Hz), 2.72 (d, 2, J = 7 Hz), 4.15 (q, 4, J = 7 Hz), 4.9-6.6 (m, 6); IR (neat) 1730,1635 cm-'; mass spectrum, m / e 226 (M'), 79 (base peak). 2-Methyl-2-vinyl-1,3-cyclopentanedione (28). A solution of the sulfone 26 (206 mg, 0.74 mmol) in 2% aqueous THF (50 mL) was desulfurized with aluminum amalgam (aluminum, 1.00 g, 37.0 mmol). Purification on a silica gel preparative-layer plate (1:1)] gave a mixture of the diastereoisomers 27 [Et&-n-hexane (by 'H NMR spectrum) as a colorless oil: 49 mg (47%);'H NMR (CDClJ 6 1.15 (s, L2), 1.16 (s, 1.8),1.5-2.5 (m, 5 ) , 4.08 (m, 0.6), 4.28 (m, 0.4), 5.0-6.1 (m, 3); IR (neat) 3440, 1730, 1630 cm-'; mass spectrum, m / e 140 (M+),81 (base peak). To a stirred suspension of pyridinium chlorochromate (104 mg, 0.48 mmol) with Celite (No. 545,500 mg) in dry CHzClz( 5 mL) was added a solution of the alcohol 27 (45 mg, 0.32 mmol) in dry CH2Cl2(3 mL). After being stirred at room temperature for 2 h, the reaction mixture was filtered with suction to remove Celite and washed with CH2C12 The filtrate was concentrated in vacuo to afford a crude oil, which was chromatographed on a silica gel column to give 28 as a colorless oil 41 mg (93%); 'H NMR (CDC13)6 1.23 (s,3), 2.79 (m, 4), 5.16 (dd, 1, J = 0.7, 17 Hz), 5.24 (dd, I, J = 0.7, 10 Hz), 5.64 (dd, J = 10, 17 Hz); IR (neat) 1720, 1625 cm-I; mass spectrum, m / e 138 (M'), 110, 95 (base peak). A20-N-Tosyl-4,8-dioxoaspidospermidine (31). A solution of the sulfone 30 (43 mg, 0.07 "01) in 5% aqueous CH3CN (11mL) was desulfurized with aluminum amalgam (aluminum, 58 mg, 2.15 mmol). Purification on a silica gel preparative-layer plate [CHzCl2-AcOEt-MeOH (8:12:1)] gave 31 as a brown oil: 14 mg (41%); 'H NMR (CDC13) 6 2.38 (s, 3), 4.10 (dd, 1,J = 7, 15 Hz), 4.10 (s, l),4.80 (dd, 1, J = 4, 10 Hz), 4.93 (dd, 1, J = 4, 15 Hz), 5.45 (dd, 1,J = 10, 15 Hz), 7.0-7.8 (m, 8); IR (CHC13)1710, 1625 cm-l; mass spectrum, m / e 462 (M'). General Desulfurization Method B. To a solution of the vinyl sulfone (14, 18, or 22) in dry CH2C1, were added tri-

Ohnuma et al. methylsilyl cyanide (Me3SiCN,5 equiv) and a catalytic amount of ZnI, under argon, and the mixture was stirred at room temperature for 4 days. The reaction mixture was washed with water, dried over MgSO,, and concentrated in vacuo to give the cyanosilylated product. This was submitted to desulfurization by method A. Finally, the general procedure for deprotection of the cyanosilyl group of the desulfurized products is as follows. To a stirred solution of the cyanosilyl compound (15, 19, or 23) in 10% aqueous THF was added AgF (1.1 equiv), and then the mixture was heated at 40 "C for 5 h. After cooling at room temperature, the reaction mixture was diluted with CH2C12, washed with water, and dried over MgSO,. Evaporation of the solvent gave the crude product, which was purified by silica gel column chromatography (EtzO-n-hexane). Ethyl Tiglate (16). According to method B, addition of 14 (200 mg, 0.64 mmol) with Me3SiCN (0.3 mL, 3.2 mmol) in dry CHzClz (2 mL) gave ethyl 3-cyano-2-methyl-2-[(2)-2-(phenylsulfonyl)vinyl]-3-(trimethylsiloxy)butoateas colorless crystals: 218 mg (83%); mp 125-127 "C (rz-hexane);'H NMR b 0.28 (s,9), 1.35 (t, 3, J = 7 Hz), 1.67 (s, 3), 1.81 (s, 3), 4.31 (q, 2, J = 7 Hz), 6.22 (d, 1,12 Hz), 6.50 (d, 1,J = 12 Hz), 7.5-8.1 (m, 5 ) ;IR (Nujol) 2220,1730,1615,1310,1140cm-'. Anal. Calcd for C19HnN05SSi: C, 55.72; H, 6.64; N, 3.42. Found: C, 55.26; H, 6.67; N, 3.40. Desulfurization of the above sulfone (108 mg, 0.26 mmol) with aluminum amalgam (aluminum, 350 mg, 13.0 mmol) in 2% aqueous THF (20 mL) gave the crude oil, which was chromatographed on a silica gel preparative-layer plate [ Et20-rz-hexane (1:2)] to afford a 1:l mixture of diastereoisomers 15 as a colorless oil: 60 mg (80%);'H NMR (CCl,) b 0.22 (s, 9), 1.29 (t, 1.5, J = 7 Hz), 1.30 (t, 1.5, J = 7 Hz), 1.34 (s, L5), 1.42 (s, 1.5), 1.56 (s, 15), 1.60 (s, 1.5), 4.15 (q, 2, J = 7 Hz), 5.0-6.4 (m, 3); IR (neat) 2150,1720,1620 cm-'; mass spectrum, m / e 254, 100 (base peak). Deprotection of the cyanosilyl group of 15 (82 mg, 0.30 mmol) in 10% aqueous THF (5 mL) with AgF (42 mg, 0.33 mmol) gave ethyl tiglate (16) as a colorless oil (30 mg, 77%) whose spectral data ('H NMR and IR) were identical with those of the authentic sample. Ethyl 2-Oxo-1-vinylcyclopentanecarboxylate(20). Addition of 18 (100 mg, 0.31 mmol) with Me,SiCN (0.16 mL, 1.55 mmol) in dry CH,Cl, (1 mL) gave ethyl 2-cyano-l-[(2-phenylsulfonyl)vinyl]-2-(trimethylsiloxy)cyclopentanecarboxylateas a colorless oil (123 mg, 94%). Desulfurization of the above sulfone (105 mg, 0.25 mmol) with aluminum amalgam (aluminum, 350 mg, 13.0 mmol) in 2% aqueous THF (20 mL) gave the crude oil, which was chromatographed on a silica gel preparative-layer plate [Et@-rz-hexane (2:1)] to afford 19 as a colorless oii: 55 mg (78%); 'H NMR (CCl,) b 0.22 (s, 9), 1.31 (t, 3, J = 7 Hz), 1.8-2.3 (m, 6), 4.15 (4, 2, J = 7 Hz), 5.1-6.5 (m, 3); IR (neat) 2230, 1735, 1625 cm-'; mass spectrum, m / e 281 (M'), 235 (base peak). Deprotection of the cyanosilyl group of 19 (100 mg, 0.36 mmol) in 10% THF ( 5 mL) with AgF (54 mg, 0.43 mmol) gave 20 as a colorless oil: 53 mg (82%); 'H NMR (CDC13)6 1.26 (t, 3, J = 7 Hz), 1.9-2.5 (m, 4), 2.5-2.7 (m, 2), 4.22 (4, 2, J = 7 Hz), 5.24 (d, 1,J = 17 Hz), 5.34 (d, 1,J = 11 Hz), 6.11 (dd, 1,J = 11, 17 Hz); IR (neat) 1750, 1725, 1635 cm-'; mass spectrum, m / e 182 (M'), 154 (base peak), 137. Methyl 2-Oxo-1-vinylcyclohexanecarboxylate(24). Addition of 22 (550 mg, 1.71 mmol) with Me3SiCN (0.80 mL, 8.55 mmol) in dry CHzClz (4 mL) gave methyl 2-cyano-l-[(2-(phenylsulfonyl)vinyl]-2-(trimethylsiloxy)cyclohexanecarboxylate as a colorless oil (666 mg, 93%). Desulfurization of the above sulfone (101 mg, 0.24 mmol) with aluminum amalgam (aluminum, 350 mg, 13.0 mmol) in 2% aqueous THF (20 mL) gave the crude oil, which was chromatographed on a silica gel preparative-layer plate [Et&--n-hexane (1:1)]to afford 23 as a colorless oil: 54 mg (80%); 'H NMR (CDC13)6 0.22 ( 8 , 9), 1.4-2.2 (m, 8), 3.66 (s, 3), 5.1-6.4 (m, 3); IR (neat) 2240,1735,1630 cm-l; mass spectrum, m / e 281 (M+),266 (base peak), 249. Deprotection of the cyanosilyl group of 23 (84 mg, 0.30 mmol) in 10% aqueous THF (5 mL) with AgF (42 mg, 0.33 mmol) gave 24 as a colorless oil: 46 mg (85%); 'H NMR (CDC13)6 1.6-2.8 (m, 8), 3.75 (s, 3), 5.12 (d, 1, J = 17 Hz), 5.29 (d, 1,J = 11 Hz), 6.27 (dd, 1,J = 11, 17 Hz); IR (neat) 1740, 1715, 1635 cm-'; mass spectrum, m / e 182 (M'), 150, 123 (base peak). Diethyl 2-Vinyladipate (33) and Diethyl 2Ethylideneadipate (34). To a solution of the vinyl sulfone 18

J. Org. Chem. 1982,47,4717-4720

4717

(352mg, 1.09 mmol) in dry EtOH (12 mL) were added triethyl Organic Resources" and for Scientific Research4 (No. orthoformate (1.7mL, 10.3 mmol) and one drop of concentrated 557477) from the Ministry of Education, Science, and H2S04,and the mixture was stirred at room temperature for 2 Culture, which are gratefully acknowledged. We thank Ms. days. After addition of saturated NaHCO, (10 mL) to the reaction A. Itoh for her technical cooperation. mixture, the solvent was concentrated in vacuo, and the residue Registry No. 1, 32501-93-2; 7,133-13-1; 8, 83219-76-5; 9,63383was extracted with CH2C12.The extract was washed with water, 27-7;10, 2049-80-1;(E)-ll,83219-90-3;(2)-11,83219-77-6;12, dried over MgS04,and evaporated in vacuo to give a mixture of 83219-78-7;13,609-14-3; 14,83219-79-8;15 (isomer l),83219-80-1; olefinic isomers 32 as a colorless oil (401mg, 100%). According 15 (isomer 2), 83219-95-8;16, 5837-78-5;17, 611-10-9;(E)-18, to method A, desulfurization of 32 (88 mg, 0.24 mmol) with 83219-91-4;(2)-18,83219-81-2;19, 83219-82-3; 20, 63383-28-8;21, aluminum amalgam (aluminum, 350 mg, 13.0 mmol) in 2% 41302-34-5; (E)-22,83219-92-5; (2)-22,83219-83-4; 23,83219-84-5; 24, aqueous THF (20mL) gave a 7 3 mixture (by 'H NMR spectrum) 83219-85-6; 25,765-69-5; 26, 83219-86-7; 27 (isomer l),83289-18-3; of 33 and 34 as a colorless oil: 49 mg (90%); 'H NMR (CDCI,) 27 (isomer 2), 83289-19-4;28, 71545-36-3;29, 83219-87-8;(E)-30, 6 1.27 (t,6,J = 7 Hz),1.5-1.9 (m, 4),1.83 (d, 0.9,J = 7 Hz), 2.2-2.4 83219-88-9;(2)-30,83219-89-0;31, 83231-98-5;33, 83219-93-6;34, (m,2),3.01(m,0.7),4.16(q,2,J=7Hz),4.18(q,2,J=7Hz), 83219-94-7;Me3SiCN, 7677-24-9;ethyl 3-cyano-2-methyl-2-[ (2)-25.1-6.0 (m, 2.1),6.96 (q, 0.3,J = 7 Hz);IR (neat) 1730,1635 cm-l; (phenylsulfonyl)viny1]-3-(trimethylsiloxy)butanoate, 83219-96-9; mass spectrum, m l e 228 (M+), 183,81 (base peak). ethyl 2-cyano-1-[ (2-phenylsulfonyl)vinyl]-2-(trimethylsiloxy)cyclo-

Acknowledgment. This research was supported by Grants-in-Aid for Special Project Research "Nitrogen

pentanecarboxylate, 83219-97-0;methyl 2-cyano-l-[2-phenylsulfonyl)vinyl]-2-(trimethylsiloxy)cyclohexanecarboxylate,83219-

98-1.

Sequential (?r-Ally1)palladiumAlkylations Richard S. Valpey, David J. Miller, James M. Estes, and Stephen A. Godleski* Department of Chemistry, University of Rochester, Rochester, New York 14627

Received March 4, 1982 Sequential a-allyl alkylation reactions have been studied by using diallylic and allylic-homoallyliccyclopentenyl diesters as substrates. The regio- and stereochemistry of these reactions have been determined. The use of an acetate-pivalate diester allowed discrete addition of two different nucleophiles in this reaction. We envisioned sequential a-allyl alkylation reactions as having the potential for considerable synthetic utility. To date, only a single example of such a process has been investigated, and it involved a discrete, two-step procedure for the construction of cyclopropanes.' Specifically, we sought the development and application of this methodology for the preparation of the five-membered ring containing antileukemic alkaloid cephalotaxine2as well as prostaglandin analogues. The tandem a-allyl intermediates in this double alkylation process allow the two new bonds to be made with complete stereospecificity, their stereochemistry being dictated by the relative stereochemistry of the initial diallylic or allylic-homoallylic a-allyl p r e c ~ r s o r . In ~ addition, r-allyl alkylations are known4 to tolerate a number of active electrophiles (e.g., carbonyl groups) in the key bond-forming steps, further widening the applicability of this process. The use of a cyclopentene precursor to test the feasibility of this reaction, in addition to the indicated synthetic relevance, provides a particularly stringent challenge. This is based on our a priori analysis that the major competing reaction would be a base-induced elimination of HOR to give a diene, a process to which a cyclopentene substrate (1)Genet, J. P.; Pian, F.; Ficini, J. Tetrahedron Lett. 1980,21,3183. (2)Paudler, W. W.; Kerley, G. I.; McKay, J. J. Org. Chem. 1963,28, 2194. Paudler, W. W.;McKay, J. Ibid. 1973, 38, 2110.

(3)Stereospecificity in T-allyl alkylation, i.e., complete retention of configuration with respect to the allylic C-X bond in nucleophilic addition: Trost, B. M.; Weber, L. J.Am. Chem. Soc. 1975,97, 1611. (4)Trost, B. M.; Dietache, T. J.; Fullerton, T. J. J. Org. Chem. 1974, 39, 137.

0022-3263182f 1947-4717$01.25JO

Scheme Ia

1

Pd

-

2

\ 5

9 a

3

4

E = CO,C,H,.

should be particularly susceptible.

Results and Discussion Our investigation of sequential a-allyl alkylation reactions was initiated by using simple cyclopentene substrates in order to determine the viability of this process as well as to gain information regarding its regio- and stereochemistry. The bis(a-allyl) substrate cis-3,4-diacetoxycyclopent-lene (1)5 was prepared by acetylation of the corresponding diol.6 In principle, three products (2-4,Scheme I) could (5)For the preparation of cis-3,4-diacetoxycyclopent-l-ene (1) see: Owen, L. N.; Smith, P. N. J . Chem. SOC.1952,4035.

0 1982 American Chemical Society