Photoanode for Plasmon-Enhanced Photocataly - ACS Publications

Mar 11, 2018 - wave. Because a peak resonant wavelength of the given metal. NP can be tailored to ... (360−500 nm) well matches with the absorption ...
1 downloads 0 Views 1MB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

C: Energy Conversion and Storage; Energy and Charge Transport 4

Plasmonic Silver Nanoparticle-Impregnated Nanocomposite BiVO Photoanode for Plasmon-Enhanced Photocatalytic Water Splitting Sang Yun Jeong, Hye-Min Shin, Yong-Ryun Jo, Yeong Jae Kim, Seungkyu Kim, WonJune Lee, Gil Ju Lee, Jaesun Song, Byung Joon Moon, Sehun Seo, Hyunji An, Sang Hyun Lee, Young Min Song, Bong-Joong Kim, Myung-Han Yoon, and Sanghan Lee J. Phys. Chem. C, Just Accepted Manuscript • DOI: 10.1021/acs.jpcc.8b00220 • Publication Date (Web): 11 Mar 2018 Downloaded from http://pubs.acs.org on March 11, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 19

Plasmonic Silver Nanoparticle-Impregnated Nanocomposite BiVO4 Photoanode for PlasmonEnhanced Photocatalytic Water Splitting Sang Yun Jeong†,ǁ, Hye-Min Shin†,ǁ, Yong-Ryun Jo†, Yeong Jae Kim‡, Seungkyu Kim†, WonJune Lee†, Gil Ju Lee‡, Jaesun Song†, Byung Joon Moon§, Sehun Seo†, Hyunji An†, Sang Hyun Lee§, Young Min Song‡, Bong-Joong Kim†, Myung-Han Yoon*,†, and Sanghan Lee*,† †

School of Materials Science and Engineering, Gwangju Institute of Science and Technology,

123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea ‡

School of Electrical Engineering and Computer Science, Gwangju Institute of Science and

Technology, 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea §

Institute of Advanced Composite Materials, Korea Institute of Science and Technology, 92

Chudongro, Bongdong-eup, Wanju-gun, Joellabuk-do 55324, Republic of Korea

ABSTRACT

Herein, we developed the fully solution-deposited nanocomposite photoanode based on silver nanoparticles (NPs) impregnated bismuth vanadate (BiVO4) films. The synthesized Ag NPs exhibit diameters of few nanometers and uniform matrix dispersion, which were confirmed by

ACS Paragon Plus Environment

1

Page 3 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

high-resolution transmission electron microscopy. The photoanode composed of Ag NPincorporated nanocomposite BiVO4 showed the remarkable enhancement in both the lowpotential and the saturated photocatalytic current densities in comparison with the pristine BiVO4 film. The observed experimental results are attributed to the improved carrier generation and enhanced charge separation by the localized surface plasmon resonance (LSPR)-mediated effect as suggested by an electrochemical impedance spectroscopy and a numerical simulation.

INTRODUCTION Recently, the energy harvesting technology based on the photocatalytic water splitting has drawn significant attention since it utilizes the unlimited free energy resources such as solar energy. In the early stage of the photocatalysis research, titanium dioxide (TiO2) has been intensively investigated as an photoanode due to its natural abundance and stability during the reaction.1-3 However, the photocatalytic performances of TiO2-based photocatalysts are poor since the TiO2 has large bandgap of 3.2 eV (388 nm), thus the light absorption is limited to the near-UV region (< 400 nm). To overcome this issue, harnessing the localized surface plasmon resonance (LSPR) in metal nanoparticles (NPs) has been proposed as one of the possible solutions. The LSPR represents the response of oscillatory electrons in metal with respect to the incident light wave. Since a peak resonant wavelength of the given metal NP can be tailored to the visible region by controlling its size and shape4,5, the NP-modified TiO2 photocatalysts exhibit the photocatalytic activity under the illumination of the visible light.6-8 This strategy is particularly referred to as ‘plasmonic photocatalysis’ and has been applied to the other oxides such as bismuth vanadate (BiVO4),9-14 hematite (α-Fe2O3),15 and tungsten oxide (WO3).12 Among them, the BiVO4 is one

ACS Paragon Plus Environment

2

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 19

of the most intensively studied materials because the monoclinic BiVO4 shows a small-bandgap (~2.4 eV) and favourable band edge position with respect to the water redox potential.11,17-29 Solution-based techniques for fabricating various photocatalysts including the plasmonic photocatalysis materials have been employed by many researches due to its low cost and facile composition variation. But, most of the previous studies regarding the solution-deposited NPbased photocatalyst development show that metal NPs were partially-embedded into or tethered on the surface of semiconductor layer.11,18-26 In the case of both structures the full utilization of LSPR-induced enhancement effects is limited since the penetration depth of the LSPR-induced electric field is very short, thus the carrier generation occurs only in the finite region of semiconductor at the vicinity of metal NPs (a few nm from the metal surface).4 Herein, we developed the fully solution-deposited silver (Ag) NP impregnated nanocomposite BiVO4 (Ag-BiVO4) photoanode for maximum utilization of LSPR-induced enhancement effects. The Ag NP was chosen since its resonant wavelength (360 to 500 nm) well matches with the absorption edge of the BiVO4 (~520 nm).4 The proposed synthesis method is exceptionally simple based on all solution-based techniques as described in Figure 1. We fully examined the structural characteristics and photocatalytic performance of synthesized Ag-BiVO4 film while the Ag concentration was varied, and compared these results with those from the pristine BiVO4. Furthermore, the observed contribution of the LSPR-induced enhancement at the various Ag NP contents was investigated comprehensively by analysing the observed photocatalysis characterizations in conjunction with the results obtained from the photoluminescence spectroscopy and the numerical simulation. EXPERIMENTAL SECTION

ACS Paragon Plus Environment

3

Page 5 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Materials for synthesizing Ag-BiVO4. Bismuth (III) nitrate pentahydrate (Bi(NO3)3·5H2O, 98%, Alfa Aesar), vanadyl acetylacetonate (VO(acac)2, 98%, Alfa Aesar), acetylacetone (99.5%, Fluka), silver nitrate (AgNO3, 99.9%, Alfa Aesar), N,N-dimethylformamide (99.8%, Aldrich), sodium sulfate (Na2SO4, 99%, Aldrich), sodium sulfite (Na2SO3, 99%, Aldrich) were purchased and utilized without the further purification. Fabrication of Ag-BiVO4 film. For preparation of precursor solutions, we referred to the previous work reported by Pastoriza-Santos and Liz-Marzán, which shows that the reduction of silver nitrate in N,N-dimethylformamide in the presence of organosilicon compounds directly led to silica coated silver nanoparticles.30 In the case of Ag-BiVO4 film, stoichiometric Bi-V solution was synthesized by dissolving 0.194 g of Bi(NO3)3·5H2O and 0.106 g of VO(acac)2 in 11.5 mL of acetylacetone followed by sonication. The AgNO3 precursor was weighed and dissolved in 5 mL of N,N-dimethylformamide in order to make the AgNO3 solutions with the concentrations of 20, 40, and 80 mM, followed by addition of 0.10 mL of deionized water and sonication. Both solutions were mixed and stirred thoroughly for 10 – 15 min with the volume ratio of 4:1. The corresponding concentrations of the AgNO3 in the final solutions are 4.0, 8.0, and 16 mM, respectively. F-doped tin oxide coated glasses (FTO glass, Pilkington, TEC 15) were used as substrates. The size of the FTO substrates was typically 1.0 cm x 1.5 cm. Before fabrication, the FTO substrate was sonicated successively in deionized water, acetone, and isopropyl alcohol. For photocurrent measurement, the conductive FTO layer (i.e., 1.0 cm x 0.50 cm) was defined by an insulating tape. The final solution was coated on the FTO substrate by spin-coating. Then, the sample was dried at 100°C for 5 min, followed by the thermal annealing at 500°C for 10 min under the ambient condition. Finally, after multiple coatings, the substrates were annealed at 500°C for 2 hrs.

ACS Paragon Plus Environment

4

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 19

Characterizations of Ag-BiVO4 films. Crystalline phase analysis was performed by an X-ray diffraction technique using Cu Kα radiation (λ = 1.5405 Å) with a Rigaku D/MAX-2500 X-ray diffractometer. The diffractometer was operated at 40 kV and 100 mA for the measurement of polycrystalline BiVO4 film on FTO glass. The theta-2theta (θ-2θ) scan was measured between 10 and 55 degrees with the scan speed of 0.1 degree/s. Diffuse reflectance UV-vis absorption spectra were obtained using a Varian Cary 500 Scan spectrometer. Photoelectrochemical cell measurements were performed under an illuminated condition of 1 Sun (100 mW/cm2) using a 300 W Xe lamp (Newport) with an AM 1.5G filter (Newport). The photoanode substrates were sealed with the insulating epoxy except the contact side with the electrolyte solution, the area of which was measured from the ruler-scaled photographs of each sample. The light was illuminated on the front side (BiVO4) of the sample in a three-electrode glass cell through a quartz window. In our configuration, the BiVO4 was used as a working electrode, while Pt and Ag/AgCl (saturated KCl) were employed as a counter electrode and a reference electrode, respectively. The potential applied on the BiVO4 electrode was measured by the Ag/AgCl (saturated KCl) and calculated to the potential versus the reversible hydrogen electrode (VRHE) through the following equation: VRHE = VAg/AgCl + V0Ag/AgCl + 0.059×pH

(1)

where V0Ag/AgCl is 0.197 V at 25°C. Aqueous solutions of 0.5 M sodium sulfate with 0.5 M sodium sulfite were introduced as electrolyte. Linear sweep voltammetry measurements were conducted using an Autolab PGSTAT302N potentiostat with a scan rate of 10 mV/s. Electrochemical impedance spectroscopy (EIS) and incident photon-to-current conversion efficiency (IPCE) was measured using Potentiostat (nStat, Ivium Technologies). The EIS was measured with applying 1.23 V vs

ACS Paragon Plus Environment

5

Page 7 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

RHE.

Photoluminescence

measurement

was

conducted

using

a

photoluminescence

spectrophotometer (Hitachi F-7000). The structural characteristics of the Ag-BiVO4 films and elemental mapping were investigated using a high-resolution transmission electron microscope (TecnaiTM G2 F30 S-Twin, 300 KeV, FEI). The surface morphology of the sample was confirmed by field-emission scanning electron microscopy (FESEM, Hitachi S-4700). Auger electron spectroscopy (AES) was carried out at the electron beam energy of 3 kV and the measurement area was 2.0 um x 2.0 um for all samples (PHI 700, KIST). Simulation. The electric field distribution and the optical absorption characteristics of the AgBiVO4 were calculated by the 3-dimensional finite-difference time-domain method (FullWAVE, RSoft Design Group, USA) with 2000 grid points per wavelength (PPW). The simulation domain sizes in the x, y and z directions were 20, 20, 40 nm, respectively. The perfectly matched layer (PML) boundary conditions were used to isolate the computational regions. The Ag-BiVO4 structures were illuminated by a normal incident plane wave with different monochromatic wavelengths (i.e. 360, 430, 550 nm). The wave propagation monitor was located on x-z plane (y = 0) to measure the spatial absorption profile. The optical constants of the Ag and the water were taken from the previous literature31 and that of the BiVO4 was measured using the spectroscopic ellipsometer.

RESULTS AND DISCUSSION The Ag NPs in the Ag-BiVO4 film were examined by the transmission electron microscopy (TEM). In Figure 2a-c, the bright field (BF) images of the Ag-BiVO4 films prepared using the mixed solutions with the different Ag concentrations. The lattice spacing of 0.2042 nm

ACS Paragon Plus Environment

6

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 19

corresponds to the (200) interplanar spacing of silver (face centered cubic) which is confirmed by the high resolution (HR) TEM image as shown in Figure 2d. The image also shows that the Ag which is vulnerable to oxidation is not oxidized. In addition, the elemental mapping on the Ag-BiVO4 confirms that the Ag NPs are dispersed in the BiVO4 (see Figure S1 in the Supporting Information). For the Ag concentration of 4.0 mM, it can be easily distinguished that the few nanometer-sized spherical Ag NPs are impregnated in the BiVO4 matrix (Figure 2a). However, the synthesized Ag NPs become inhomogeneous in its size and distribution for the higher Ag concentrations of 8.0 mM and 16 mM as shown in Figure 2b and 2c, respectively. For clear comparison, the changes in the size distributions of the synthesized Ag NPs are presented in Figure 2e. The diameters and the areal densities of the NPs were measured from the BF TEM images of each sample. The Gaussian plots of each distribution are given in Figure 2e inset, which shows the smallest mean diameter of 3.7 ± 0.3 nm and the narrowest size distribution are observed for the Ag concentration of 4.0 mM. The results of the 3-dimensional finite-difference time-domain (3D FDTD) simulations are given in Figure 3 and S2. The simulation results present the optimal configuration of the Ag NPs for the utilization of the LSPR effects. As shown in Figure 3, the Ag NP with an impregnated configuration (Figure 3a) reinforces the light absorption in the bulk of the BiVO4, while both the half-embedded (Figure 3b) and the surface-attached configurations (Figure 3c) affect only the near-surface region. Therefore, we confirm that the synthesized Ag-BiVO4 films are in the most appropriate configuration (see Figure 3) for the maximized utilization of the LSPR-induced enhancement effects. The physical phenomena of the plasmonic photocatalysis are at least inclusive of the followings; 1) the formation of local electric field and 2) the improved light absorption originated from the

ACS Paragon Plus Environment

7

Page 9 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

oscillation of the surface plasmon in the metal NP in response to the incoming light waves and, thereby, 3) the enhanced generation of the charge carriers. These mechanisms are depicted in Figure 4. At the initial stage, the electrons in the Ag NPs are oscillating when transverse light waves are incoming (Figure 4a). The oscillation of electrons creates the electric field in the direction proportional to the incident light, and the intensities of the electric fields are amplified4. It is generally accepted that the LSPR-induced electric field at the metal surface generates the active electron-hole pairs inside the semiconductor in the identical way that the electromagnetic light wave does (Figure 4b), and is considered as one of the major enhancement mechanisms. Moreover, the LSPR affects the light absorption of the surroundings. Note that these phenomena also work for the Ag-BiVO4 as described in Figure S2 and S3. Under the illumination of the visible light (Figure S2b and S2e) and the UV light (Figure S2a and S2d), both the BiVO4 and the Ag NP absorb the light (Figure S3), and the Ag NP generates the localized electric field by the LSPR. The characteristics of the carrier excitation in the Ag-BiVO4 are investigated by the photoluminescence (PL) measurement. As shown in Figure 5a-d, the PL intensities in the ‘dashed area’ increase with the high Ag concentrations. Since the PL intensities are proportional to the number of carrier recombination, these trends imply that the carrier concentration in the Ag-BiVO4 is increased as a result of the LSPR-induced effects as described in Figure 4. In Figure 5e-h, the detailed data for ‘dotted rectangle’ in Figure 5a-d are given. Interestingly, the emission from the electrons generated by the band excitation in the BiVO4 is blue-shifted for the Ag-BiVO4. The origin of the shift may be attributed to the influence of the LSPR-induced electric field on the excited electrons in the BiVO4 or the consequence of the hot-electron injection from the Ag NPs.

ACS Paragon Plus Environment

8

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 19

The analyses for the crystalline phase and the optoelectronic behaviour of the Ag-BiVO4 films were performed by the X-ray diffraction (XRD) and the UV-vis spectroscopy, respectively. The results are given in Figure 6a-c. The crystalline phase of the BiVO4 was analysed. Figure 6a shows that the monoclinic BiVO4 is formed in both the pristine and the nanocomposite films. Besides, in the XRD pattern of the Ag-BiVO4, characteristic peaks of Ag could not be distinguished, which implies that Ag exists as well-dispersed discrete nanoparticles rather than agglomerated clusters over the entire region of the film (see Figure S4 and S5 in the Supporting Information). The UV-vis absorption spectra given in Figure 6b are normalized by the absorbance of each spectrum at 400 nm for the clear comparison, and the absorption edge of the BiVO4 (~517 nm) is indicated by a dotted arrow. It should be noted that the LSPR-induced visible light absorption coincides with the bandgap absorption by the semiconductor. Therefore, the incorporation of the Ag NPs with the BiVO4 is expected to exhibit more intensive enhancement since the peak resonant wavelength of the spherical Ag NP could be tailored from 400 to 500 nm30,31 which range is close to the absorption edge of the BiVO4 (~517 nm). Consequently, the enhanced light absorbance with the increased Ag concentration is observed over the visible region (Figure 6b). The absorption enhancements calculated from the data given in Figure 6b provide more distinct trends (Figure 6c). It is reported that the peak resonant wavelength strongly depends on the dielectric constant of a surrounding medium; if the medium has a higher dielectric constant, the resonant wavelength of the Ag NP is red-shifted.4,30 Thus, considering that the peak wavelength range of 400 to 500 nm was obtained from the Ag NPs surrounded by the air31 or the KCL30 (dielectric constant of 4.833?), the peak absorption enhancement in the red-shifted range of 450 to 550 nm (Figure 6c) is well explained since our

ACS Paragon Plus Environment

9

Page 11 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

results are obtained from the Ag NPs surrounded by the BiVO4 medium with dielectric constant of 6830. The

photocatalytic

performances

of

the

Ag-BiVO4

films

were

investigated

by

photoelectrochemical cell (PEC) measurement. Figure 6d shows that the performances of the Ag-BiVO4 films are improved in comparison with that of the pristine BiVO4. In particular, the increase in the current densities in the Ag-BiVO4 samples is 3.3 times higher than those of the pristine sample at 0.4 V versus the reversible hydrogen electrode (V vs RHE). In addition, the saturated current density at 1.23 V vs RHE is improved while the highest value is obtained for the optimum Ag concentration of 4.0 mM. These results can be explained in terms of the LSPRinduced enhancement mechanism. It is noteworthy that we assume that the LSPR-induced enhancement is responsible for carrier generation and separation, not for water redox reaction, since the Ag NPs were impregnated in the BiVO4 medium. At first, the steep intial increase and the enhanced saturated current density are mainly attributed to the increased carrier concentration by the efficient charge carrier generation. Besides, the formation of the Schottky junction creates a space-charge region in the semiconductor5,12-16,19,31,32 and hence, the separation of the charge carriers is enhanced. Those enhancement mechanisms are observed by an electrochemical impedance spectroscopy (EIS) analysis. The EIS was conducted under the illumination of light with applying 1.23 V vs RHE, so that the carrier generation and separation kinetics during the oxygen evolution reaction (OER) could be evaluated. The EIS results are presented as a Nyquist plot as shown in Figure 6e. An equivalent circuit consists of constant phase elements (CPE), resistances, and an Warburg impedance (Ws) as described in inset of Figure 6e. The Ws is included in the circuit for better fitting results. The results are given in Table S1 (Supporting Information). Among the Ag-BiVO4 films, the 4 mM Ag-BiVO4 has the smallest Rdp (resistivity

ACS Paragon Plus Environment

10

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 19

in the depletion region). And the Rdp rises as the Ag concentration increases to 16 mM. These trends well match with the size distribution of the Ag NPs as discussed in Figure 2; the inhomogeneity in the size and dispersion of the Ag NPs are observed for the Ag concentrations of 8.0 and 16 mM. On the other hand, the smallest diameter and the narrowest size distribution are verified for the Ag concentration of 4.0 mM. Thus, the carrier recombination in the bulk of film is less likely to happen for the latter. Consequently, the incident photon-to-current conversion efficiency (IPCE) was measured to elucidate the improved efficiency by the LSPRmediated effect. The IPCE spectra were given in Figure 6f. The results show that the 4 mM AgBiVO4 exhibits the highest efficiency with the peak at 440 nm. Clearly, the highest efficiency of the 4 mM Ag-BiVO4 is attributed to the maximized utilization of the LSPR-mediated effect which is obtained by the formation of the Ag NP impregnated configuration in the BiVO4 photoanode.

CONCLUSIONS In summary, we aim to enhance the photocatalytic performance of the BiVO4 by means of the LSPR-mediated enhancement mechanisms. In order to achieve the goal, we have synthesized the Ag NP impregnated BiVO4 film by the fully solution-based technique. As a result, the performance of the nanocomposite film exhibited the drastic increase in the current density at low potential and the improved kinetics of the carrier generation and separation. We believe that the synthesis method of this study is readily applicable to various photocatalytic systems containing the light-active semiconductors and the noble metal nanoparticles such as Ag, Au, and Pt.

ACS Paragon Plus Environment

11

Page 13 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

ASSOCIATED CONTENT Supporting Information. TEM elemental mapping results, Additional FDTD simulation results, Surface SEM images of the samples, Auger electron spectra, Fitting results of EIS analysis.

AUTHOR INFORMATION Corresponding Author *E-mail: [email protected], [email protected] Author Contributions ǁ

These authors contributed equally.

Notes The authors declare no competing financial interest.

ACKNOWLEDGMENTS This work was supported by Samsung Research Funding Center of Samsung Electronics under Project Number SRFC-MA1402-10.

REFERENCES (1) Fujishima, A.; Honda, K. Electrochemical Photolysis of Water at a Semiconductor Electrode. Nature 1972, 238, 37-38.

ACS Paragon Plus Environment

12

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 19

(2) Schrauzer, G. N.; Guth, T. D. Photocatalytic Reactions. 1. Photolysis of Water and Photoreduction of Nitrogen on Titanium Dioxide. J. Am. Chem. Soc. 1977, 99, 7189-7193. (3) Low, J.; Yu, J.; Jaroniec, M.; Wageh, S.; Al-Ghamdi, A. A. Heterojunction Photocatalysts. Adv. Mater. 2017, 29, 1601694. (4) Zhang, X.; Chen, Y. L.; Liu, R.-S.; Tsai, D. P. Plasmonic Photocatalysis. Rep. Prog. Phys. 2013, 76, 046401. (5) Linic, S.; Christopher, P.; Ingram, D. B. Plasmonic-Metal Nanostructures for Efficient Conversion of Solar to Chemical Energy. Nat. Mater., 2011, 10, 911-921. (6) Awazu, K.; Fujimaki, M.; Rockstuhl, C.; Tominaga, J.; Murakami, H.; Ohki, Y.; Yoshida, N.; Watanabe, T. A Plasmonic Photocatalyst Consisting of Silver Nanoparticles Embedded in Titanium Dioxide. J. Am. Chem. Soc. 2008, 130, 1676-1680. (7) Kumar, M. K.; Krishnamoorthy, S.; Tan, L. K.; Chiam, S. Y.; Tripathy, S.; Gao, H. Field Effects in Plasmonic Photocatalyst by Precise SiO2 Thickness Control Using Atomic Layer Deposition. ACS Catal. 2011, 1, 300-308. (8) Park, J.; Kim, H. J.; Nam, S. H.; Kim, H.; Choi, H.-J.; Jang, Y. J.; Lee, J. S.; Shin, J.; Lee, H.; Baik, J. M. Tow-Dimensional Metal-Dielectric Hybrid-Structured Film with Titanium Oxide for Enhanced Visible Light Absorption and Photo-Catalytic Application. Nano Energy, 2016, 21, 115-122. (9) Chen, Y.-S.; Manser, J. S.; Kamat, P. V. All Solution-Processed Lead Halide PerovskiteBiVO4 Tandem Assembly for Photolytic Solar Fuels Production. J. Am. Chem. Soc. 2015, 137, 974-981. (10) Park, Y.; McDonald, K. J.; Choi, K.-S. Progress in Bismuth Vanadate Photoanodes for Use in Solar Water Oxidation. Chem. Soc. Rev. 2013, 42, 2321-2337. (11) Lee, M. G.; Moon, C. W.; Park, H.; Sohn, W.; Kang, S. B.; Lee, S.; Choi, K. J.; Jang, H. W. Dominance of Plasmonic Resonant Energy Transfer over Direct Electron Transfer in Substantially Enhanced Water Oxidation Activity of BiVO4 by Shape-Controlled Au Nanoparticles Small, 2017, 13, 1701644. (12) Li, J.; Zhou, J.; Hao, H.; Li, W. Controlled Synthesis of Fe2O3 modified Ag-010BiVO4 Heterostructures with Enhanced Photoelectrochemical Activity toward the Dye Degradation. Appl. Surf. Sci. 2017, 399, 1-9. (13) Huang, C.-K.; Wu, T.; Huang, C.-W.; Lai, C.-Y.; Wu, M.-Y.; Lin, Y.-W. Enhanced Photocatalytic Performance of BiVO4 in Aqueous AgNO3 Solution under Visible Light Irradiation. Appl. Surf. Sci. 2017, 399, 10-19. (14) Wu, C.; Fang, Y.; Tirusew, A. H.; Xiang, M.; Huang, Y.; Chen, C. Photochemical Oxidation Mechanism of Microcystin-RR by P-N Heterojunction Ag/Ag2O-BiVO4. Chin. J. Catal., 2017, 38, 192-198. (15) Zhong, D. K.; Cornuz, M.; Sivula, K.; Grätzel, M.; Gamelin, D. R. Photo-Assisted Electrodeposition of Cobalt–Phosphate (Co–Pi) Catalyst on Hematite Photoanodes for Solar Water Oxidation. Energy Environ. Sci. 2011, 4, 1759-1764. (16) Seabold, J. A.; Choi, K.-S. Effect of a Cobalt-Based Oxygen Evolution Catalyst on the Stability and the Selectivity of Photo-Oxidation Reactions of a WO3 Photoanode. Chem. Mat. 2011, 23, 1105-1112. (17) Zhao, Z.; Li, Z.; Zou, Z. Electronic Structure and Optical Properties of Monoclinic Clinobisvanite BiVO4. Phys. Chem. Chem. Phys. 2011, 13, 4746-4753. (18) Valenti, M.; Kontoleta, E.; Digdaya, I. A.; Jonsson, M. P.; Biskos, G.; Schmidt‐Ott, A.; Smith, W. A. The Role of Size and Dimerization of Decorating Plasmonic Silver Nanoparticles

ACS Paragon Plus Environment

13

Page 15 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

on the Photoelectrochemical Solar Water Splitting Performance of BiVO4 Photoanodes. ChemNanoMat 2016, 2, 739-747. (19) Fang, L.; Nan, F.; Yang, Y.; Cao, D. Enhanced Photoelectrochemical and Photocatalytic Activity in Visible-Light-Driven Ag/BiVO4 Inverse Opals. Appl. Phys. Lett. 2016, 108, 093902. (20) Wang, M.; Lu, W.; Chen, D.; Liu, J.; Hu, B.; Jin, L.; Lin, Y.; Yue, D.; Huang, J.; Wang, Z. Synthesis of Dendritic-Like BiVO4: Ag Heterostructure for Enhanced and Fast Photocatalytic Degradation of RhB Solution. Mater. Res. Bull. 2016, 84, 414-421. (21) Du, M.; Xiong, S.; Wu, T.; Zhao, D.; Zhang, Q.; Fan, Z.; Zeng, Y.; Ji, F.; He, Q.; Xu, X. Preparation of a Microspherical Silver-Reduced Graphene Oxide-Bismuth Vanadate Composite and Evaluation of Its Photocatalytic Activity. Materials 2016, 9, 160. (22) Gan, H.; Rajeeva, B. B.; Wu, Z.; Penley, D.; Liang, C.; Tong, Y.; Zheng, Y. PlasmonEnhanced Nanoporous BiVO4 Photoanodes for Efficient Photoelectrochemical Water Oxidation. Nanotechnology 2016, 27, 235401. (23) Zhang, L.; Herrmann, L. O.; Baumberg, J. J. Size Dependent Plasmonic Effect on BiVO4 Photoanodes for Solar Water Splitting. Sci. Rep. 2015, 5. (24) Trzciński, K.; Szkoda, M.; Sawczak, M.; Karczewski, J.; Lisowska-Oleksiak, A. Visible Light Activity of Pulsed Layer Deposited BiVO4/MnO2 Films Decorated with Gold Nanoparticles: The Evidence for Hydroxyl Radicals Formation. Appl. Surf. Sci. 2016, 385, 199208. (25) Hirakawa, H.; Shiota, S.; Shiraishi, Y.; Sakamoto, H.; Ichikawa, S.; Hirai, T. Au Nanoparticles Supported on BiVO4: Effective Inorganic Photocatalysts for H2O2 Production from Water and O2 under Visible Light. ACS Catal. 2016, 6, 4976-4982. (26) Yan, R.; Chen, M.; Zhou, H.; Liu, T.; Tang, X.; Zhang, K.; Zhu, H.; Ye, J.; Zhang, D.; Fan, T. Bio-Inspired Plasmonic Nanoarchitectured Hybrid System Towards Enhanced Far Redto-Near Infrared Solar Photocatalysis. Sci. Rep. 2016, 6. (27) Toma, F. M.; Cooper, J. K.; Kunzelmann, V.; McDowell, M. T.; Yu, J.; Larson, D. M.; Borys, N. J.; Abelyan, C.; Beeman, J. W.; Yu, K. M.; Yang, J.; Chen, L.; Shaner, M. R.; Spurgeon, J.; Houle, F. A.; Persson, K. A.; Sharp, I. D. Mechanistic Insights into Chemical and Photochemical Transformations of Bismuth Vanadate Photoanodes. Nat. Commun. 2016, 7. (28) Lee, M. G.; Kim, D. H.; Sohn, W.; Moon, C. W.; Park, H.; Lee, S.; Jang, H. W. Conformally Coated BiVO4 Nanodots on Porosity-Controlled WO3 Nanorods as Highly Efficient Type II Heterojunction Photoanodes for Water Oxidation. Nano Energy 2016, 28, 250-260. (29) Wang, Q.; Hisatomi, T.; Jia, Q.; Tokudome, H.; Zhong, M.; Wang, C.; Pan, Z.; Takata, T.; Nakabayashi, M.; Shibata, N.; Li, Y.; Sharp, I. D.; Kudo, A.; Yamada, T.; Domen, K. Scalable Water Splitting on Particulate Photocatalyst Sheets with a Solar-to-Hydrogen Energy Conversion Efficiency Exceeding 1%. Nat. Mater. 2016, 15, 611-615. (30) Pastoriza-Santos, I. and Liz-Marzán, L. M. Formation and Stabilization of Silver Nanoparticles through Reduction by N, N-Dimethylformamide. Langmuir, 1999, 15, 948. (31) Palik, E. D. Handbook of Optical Constants of Solids, 1st ed; Academic Press: New York, 1985. (32) Kleemann, W. Absorption of Colloidal Silver in KCl. Z. Physik 1968, 215, 113-120. (33) Russell, B. K.; Mantovani, J. G.; Anderson, V. E.; Warmack, R. J.; Ferrell, T. L. Experimental Test of the Mie Theory for Microlithographically Produced Silver Spheres. Phys. Rev. B 1987, 35, 2151. (34) Mock, J. J.; Smith, D. R.; Schultz, S. Local Refractive Index Dependence of Plasmon Resonance Spectra from Individual Nanoparticles. Nano Lett. 2003, 3, 485-491.

ACS Paragon Plus Environment

14

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 19

(35) Kamiyoshi, K.; Nigara, Y. Dielectric Constant of Some Alkali Halides. Phys. Status Solidi (a) 1970, 3, 735-741. (36) Valant, M.; Suvorov, D. Chemical Compatibility between Silver Electrodes and Low‐ Firing Binary‐Oxide Compounds: Conceptual Study. J. Am. Ceram. Soc. 2000, 83, 2721-2729. (37) Thimsen, E.; Le Formal, F.; Grätzel, M.; Warren, S. C. Influence of Plasmonic Au Nanoparticles on the Photoactivity of Fe2O3 Electrodes for Water Splitting. Nano Lett. 2010, 11, 35-43. (38) Thomann, I.; Pinaud, B. A.; Chen, Z.; Clemens, B. M.; Jaramillo, T. F.; Brongersma, M. L. Plasmon Enhanced Solar-to-Fuel Energy Conversion. Nano Lett. 2011, 11, 3440-3446.

Figure captions Figure 1. Schematic illustrations of the synthesis procedures of the Ag NP impregnated nanocomposite BiVO4 film. Details of each procedure are described in Experimental section. Figure 2. HR TEM images of the Ag-BiVO4 films with the different Ag concentrations of (a) 4 mM, (b) 8 mM, and (c) 16 mM which show the changes in the sizes of the synthesized Ag NPs. The Ag NPs have the spherical shape and the FCC phase as shown in (d). (e) The size distributions of the Ag NPs are measured from each HR TEM image. The mean particle diameters are 3.7 ± 0.3, 4.2 ± 0.4, 6.1 ± 0.5 nm for the Ag concentrations of 4, 8, 16 mM, respectively. The interface between the BiVO4 and the FTO are represented as a dotted line in (a)-(c). Inset: The Gaussian plots of the data given in (e). Mean particle diameters, standard deviations, and areal densities of the Ag NPs are presented for clear comparison. Figure 3. FDTD simulation results for the light absorption distribution of the BiVO4 and the single spherical Ag NP in the different configuration; (a) an impregnated, (b) a half-embedded, (c) a surface-attached configuration. The results are calculated under the irradiation of the light

ACS Paragon Plus Environment

15

Page 17 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

which wavelength is 430 nm. The size of the Ag NP is 4 nm in diameter. The electrolyte is assumed to have the same optical constants as water. Figure 4. LSPR-induced enhancement mechanisms in the Ag-BiVO4 films are shown in (a). The detailed mechanisms described in (b) are valid under the conditions of the formation of the electrical contact between the BiVO4 and the impregnated Ag NPs. Figure 5. Photoluminescence (PL) measurement data for the Ag-BiVO4 films are given in (a)-(d). Detailed mapping results are represented in (e)-(h) for the ‘dashed rectangle’ in (a)-(d), where the PL emissions for the intra-band relaxation of the electrons in the BiVO4 are occurred. The molar concentrations given in the figure are the Ag concentrations in the precursor solution. Figure 6. (a) X-ray diffraction θ-2θ scans of the pristine BiVO4 and the Ag-BiVO4 film with the Ag concentrations of 4 mM. The signals from the FTO glass are indicated. The vertical lines are peaks of the monoclinic BiVO4 (PDF# 83-1699). (b) Normalized UV-vis absorption spectra of the Ag-BiVO4 and (c) absorption enhancement calculated from the data shown in (b). (d) Photoelectrochemical measurement data for the Ag-BiVO4 films. The electrolyte was 0.5 M Na2SO4 aqueous solution with 0.5 M Na2SO3. (e) Electrochemical impedance spectra (EIS) for Ag-BiVO4 films. Inset: an equivalent circuit for Ag-BiVO4 films. The analysis was conducted under the AM 1.5G illumination (100 mW/cm2). (f) IPCE spectra of the Ag-BiVO4 films conducted under simulated light illumination with applying 1.23 V versus RHE. The molar concentrations given in the figure are the Ag concentrations in the precursor solution.

ACS Paragon Plus Environment

16

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 19

Figure

Figure 1

Figure 2

ACS Paragon Plus Environment

17

Page 19 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Figure 3

Figure 4

Figure 5

ACS Paragon Plus Environment

18

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 19

Figure 6

TOC Graphic

ACS Paragon Plus Environment

19