Polarization-Independent, Narrowband, Near-IR Spectral Filters via

Jan 7, 2019 - *E-mail: [email protected]. ... in a thin film of SiO2 designed for narrowband filtering for multi- and hyperspectral imaging in the near...
0 downloads 0 Views 466KB Size
Subscriber access provided by University of Florida | Smathers Libraries

Letter

Polarization-independent, narrowband, near-IR spectral filters via guided mode resonances in ultra-thin a-Si nanopillar arrays Ryan Cecil Ng, Juan C. Garcia, Julia R Greer, and Katherine T. Fountaine ACS Photonics, Just Accepted Manuscript • Publication Date (Web): 07 Jan 2019 Downloaded from http://pubs.acs.org on January 8, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 37 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

Polarization-independent, narrowband, near-IR spectral filters via guided mode resonances in ultrathin a-Si nanopillar arrays Ryan C. Ng,†,* Juan C. Garcia,‡ Julia R. Greer,§ & Katherine T. Fountaine‡

†Division

of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA 91125, United States

‡NG

Next, Northrop Grumman Corporation, One Space Park, Redondo Beach, CA 90278, United States

§Division

of Engineering and Applied Sciences, California Institute of Technology, Pasadena, CA 91125, United States

Abstract

We report the optical properties obtained through experiments, simulation, and theory, of ultra-thin (1 m consisting of many layers that require a complicated and expensive fabrication process.13 To compare the performance of filters that operate in different wavelength regimes to one another, we quantify the filter spectral resolution, i.e. bandwidth, using / which is the full width at half maximum (FWHM) divided by the peak wavelength, as

ACS Paragon Plus Environment

3

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 37

bandwidths tend to be narrower at shorter wavelengths. Interference filters currently represent the commercial standard, which can achieve narrow near unity pass/stop bands with / on the order of 10-2 enabled by their large footprint, thickness, and fabrication complexity. Many plasmonic-based designs, such as subwavelength nanorod/hole arrays14–16 or metal-insulator-metal (MIM) arrays,17,18 have been explored for color and other spectral filtering because they have the potential to be small footprint and can exhibit an optical response in the visible and IR ranges, but these plasmonicbased designs are known to exhibit significant loss due to the materials used which leads to low filtering efficiencies.8,9,19 In one plasmonic demonstration, Xu et al. created MIM stack arrays consisting of 100 nm thick ZnSe sandwiched between two 40 nm thick Al layers, which allowed them to obtain / as low as ~ 10-1 and a transmission of ~4060% with a filter area dimension of 10 m x 10 m.17 With the use of nanophotonic design principles, a dielectric-based design offers the same potential for small pixel sizes as metal-based plasmonic designs, while minimizing material losses due to insignificant absorption. Appropriately-designed dielectric subwavelength 1D gratings and 2D pillar arrays exhibit narrow-band near-unity spectral variations at normal light

ACS Paragon Plus Environment

4

Page 5 of 37 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

incidence, which make them particularly useful in filtering applications.20–24 Niraula et al. reported a near-unity band in a dielectric design, with  of 3.7 x 10-4 centered at 1304 nm with a 272 nm thick patterned periodic c-Si layer on a 248 nm thick slab layer of the same material.23 These high-performance filter designs usually require thicknesses on the order of 1 m. In dielectric subwavelength arrays, only specular reflection and transmission are observed

outside

the

grating

without

any

higher

order

diffraction

or

reflection/transmission efficiencies, which gives rise to very narrow, near-unity bandwidths. These particular spectral features are passively-tunable via geometric variation of the array over a large spectral range, which is advantageous for the simultaneous production of many filters which cumulatively form a much larger contiguous spectral band desired for hyperspectral imaging. A number of theoretical explanations for these spectral features have been discussed in literature, including the interference of axially propagating waveguide modes,25–27 interference of periodic scatterers,28 and guided mode resonances.29–31 The first approach approximates the resonance to be created by two interfering axially propagating waveguide modes, and the narrowband resonances arise from their constructive and destructive interference.25–

ACS Paragon Plus Environment

5

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

27

Page 6 of 37

Magnusson et al. demonstrated that this approximation breaks down for gratings with

an antireflection layer deposited at the transmission interface or for systems with very thin structures that exhibit resonances beyond the cut-off point of the waveguides.32 This resonance effect has also been described by treating the observed resonance with analytical Mie theory as the result of interfering electric and magnetic dipole modes in an infinite array of weakly-coupled dielectric scatterers.28 In the lattermost formalism, periodic design enables an incident light wave to couple into a guided mode within the array via a grating vector, which also allows re-radiation into the cover or the substrate. This phenomenon is most commonly referred to as a guided mode resonance (GMR).29– 31

Sturmberg, et al. attempted to reconcile some of these different formalisms by

developing an analytical formulation of these spectral features as a Fano resonance, indicated by an asymmetric spectral line-shape, in a 1D slab array that arises from the interference between an axially propagating Fabry-Perot mode and an in-plane propagating grating vector-coupled waveguide mode.33 However, this theory is only valid for arrays with a fill fraction near unity as it approximates the array as a homogeneous slab with an effective index and loses accuracy the further the fill fraction

ACS Paragon Plus Environment

6

Page 7 of 37 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

of high-index material decreases. The GMR formalism is universally applicable in describing the observed near-unity narrowband reflection/transmission peaks of subwavelength periodic structures without requirements such as high fill fraction or sufficiently thick waveguide layers to be valid and, thus, it is the formalism we use for this study.

We report the optical properties of ultra-thin (