Subscriber access provided by BOSTON UNIV
Article
Pore-water carbonate and phosphate as predictors of arsenate toxicity in soil Dane Lamb, Mohammed Kader, Liang Wang, Girish Choppala, Mohammad Mahmudur Rahman, Mallavarapu Megharaj, and Ravi Naidu Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b03195 • Publication Date (Web): 31 Oct 2016 Downloaded from http://pubs.acs.org on November 1, 2016
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 28
Environmental Science & Technology
ACS Paragon Plus Environment
Environmental Science & Technology
1 2
Pore-water carbonate and phosphate as predictors of arsenate toxicity in soil
3 4 5
Dane T Lamb1,2*, Mohammed Kader1,2, Liang Wang1,2, Girish Choppala3, Mohammad Mahmudur Rahman1,2, Mallavarapu Megharaj1,2, Ravi Naidu1,2
6 7 8 9 10
1
Global Centre for Environmental Research (GCER), Faculty of Science and Information Technology, The University of Newcastle, Callaghan, Advanced Technology Building, NSW, 2308, Australia.
11 12 13 14
2
Cooperative Research Centre for Contamination Assessment and Remediation of the Environment(CRC CARE), University of South Australia, Mawson Lakes, Bld X, SA 5095, Australia.
15 16
3
Southern CrossGeoscience Southern Cross University, Lismore, NSW 2480, Australia.
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
* Email:
[email protected] Phone: +61 2 4913 8733
ACS Paragon Plus Environment
Page 2 of 28
Page 3 of 28
Environmental Science & Technology
34 35
Abstract
36 37 38 39 40 41 42 43 44 45 46 47 48 49
Phytotoxicity of inorganic contaminants is influenced by the presence of competing ions at the site of uptake. In this study, interaction of soil pore-water constituents with arsenate toxicity was investigated in cucumber (Cucumis sativa L) using 10 contrasting soils. Arsenate phytotoxicity was shown to be related to soluble carbonate and phosphate. The data indicated that dissolved phosphate and carbonate had an antagonistic impact on arsenate toxicity to cucumber. To predict arsenate phytotoxicity in soils with a diverse range of soil solution properties, both carbonate and phosphate were required. The relationship between arsenic and pore-water toxicity parameters was established initially using multiple regression. In addition, based on the relationship with carbonate and phosphate we successively applied a terrestrial biotic ligand-like model (BLM) including carbonate and phosphate. Estimated effective concentrations from the BLM-like parameterisation were strongly correlated to measured arsenate values in pore-water (R2 =0.76, P < 0.001). The data indicates that an ion interaction model similar to the BLM for arsenate is possible, potentially improving current risk assessments at arsenic and co-contaminated soils.
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
Key words: arsenate, biotic ligand model, BLM, anionic, toxicity, bioavailability
ACS Paragon Plus Environment
Environmental Science & Technology
69
Page 4 of 28
Introduction
70 71
Arsenic (As) is a major soil-borne toxicant globally and is well known to impact directly on
72
human and ecological health 1. Many of the world’s greatest problems associated with As are
73
due to mobilisation of As due to changes in hydrogeological conditions (e.g Bangladesh,
74
West Bengal in India). Arsenic contaminated soil exists as a result of anthropogenic inputs
75
from lead, zinc, arsenic, gold and silver mines, use as a pesticide in orchids and cattle dips,
76
smelter fallout from processing metalliferous ore and from wood preservatives
77
impact of As contamination in soil is known to be influenced by a range of biological and soil
78
factors, including organism, species, and a range of soil properties.
1, 2
. The
79 80
Despite As ecotoxicity being of significant research interest 3, our ability to model and
81
predict As toxicity in terrestrial systems is lacking. This translates into inconsistencies in
82
environmental guidance and management of contaminated sites. For example, a recent
83
modification of the Australian regulatory soil quality guideline values has witnessed an
84
increase from the previous 20 mg kg-1 As to between 40 and 160 mg kg-1, expressed on a
85
total metal(loid) basis 40 and 160 mg kg-1 are for sensitive ecological and industrial areas,
86
respectively). However, recently, EC10 values ranging from 23 – 395 and 5.5 to 330 mg kg-1
87
to Lactuca sativa and Vibrio fischeri, respectively, have been reported 4. Similarly, in
88
Australian soils, Kader et al. 5 reported EC20 and EC50 values of 7.8-160 and 17-440 mg kg-
89
1
90
values. The latter studies both reported a clear interaction with soil properties, which
91
ultimately govern As toxicity in surficial soil layers via modification of solubility in soil
92
solution. Risk assessment and soil guidance data should reflect the properties of soil
93
influencing the bioavailability of As.
after 3 months ageing in a range of soils, with most soils falling below the new guideline
94 95
Metal(loid) bioavailabilty to plants is influenced qualitatively by the presence of other
96
potentially competing ions in soil solution 6. It has been demonstrated that the toxicity of
97
cationic metals such as Cu2+, Zn2+ and Ni2+ from the aqueous phase are influenced by
98
solution pH surrounding the root7-9. The biotic ligand model (BLM) interprets the variation as
99
changes in H+ competition for binding sites at the site of toxicity. Similarly, modifications to
100
toxicity and uptake are reported for other major cations, such as Ca2+ and Mg2+ due to
ACS Paragon Plus Environment
Page 5 of 28
Environmental Science & Technology
101
competition. Developed BLMs are increasingly employed for cationic contaminants in an
102
attempt to account for co-contaminated waters in terrestrial and aquatic systems
10-13
. In
14
103
aquatic systems, BLMs have been reported for Chlamydomonas reinhardtii , Chlorella spp.
104
15, 16
105
species (e.g. Hordeum vulgare L. and Lactuca sativa L.) for copper, zinc, nickel and silver
106
have been reported using root elongation as the toxicity end point6, 14, 18, 19.
and Pseudokirchneriella subcapitata 13, 17. Similarly, BLMs for several terrestrial plants
107 20-23
108
Arsenate uptake in algae and higher plants is influenced by the presence of phosphate
.
109
The influence of other anions is less clear. In terms of adsorption processes, phosphate,
110
sulfate and carbonate have been demonstrated to compete with arsenate at the solid-solution
111
interface
112
sulfur containing functional groups in peat
113
However, organic-arsenic binding constants and BLM-like models are rare29,
114
comparison to cationic counterparts, such as Pb, As toxicity from solution culture has not
115
been shown to be strongly dependent on pH. WHAM (Windermere Humic Aqueous Model)
116
is a speciation software which primarily is used for modelling cation binding with humic
117
substances. Recently, WHAM has been applied to toxicity modelling31. WHAM utilises
118
binding constants relating to Humic and Fulvic acids and has been applied primarily to
119
aquatic organisms. However, as there are presently no binding constants included in the
120
WHAM speciation software for As and dissolved organic carbon, there are significant
121
limitations in the application of biotic ligand or the WHAM-based Ftox models31 at
122
contaminated sites. Since arsenate is taken up via the phosphate cotransport system, ions able
123
to influence phosphate uptake may similarly influence arsenate (e.g. carbonate) 32. To the best
124
of our knowledge, there are no empirical or mechanistic models reporting arsenate toxicity in
125
a complex multi-ion terrestrial systems, particularly phosphate and carbonate.
24, 25
. Arsenic binding to organic solid substrates has been shown to occur with 26
, cysteine
27
and proteinaceous biowastes 30
.
28
.
In
126 127
In this study, we related measured soil pore-water As toxicology and the influence of
128
phosphate and carbonate from the pore-water of 10 contrasting soils. The role of soil pore-
129
water parameters on As bioavailability to the test organism, Cucumis sativa L. (cucumber),
130
was investigated in detail and a BLM-like model is reported.
131 132
ACS Paragon Plus Environment
Environmental Science & Technology
133 134
Materials and Methods
135
Soil collection and spiking
136
Soils (10) from different parts of Australia (specifically South Australia, Victoria, New South
137
Wales and Queensland) were sampled from the top 0-0.2m of each profile, air-dried and
138
sieved through 2 mm stainless steel sieves. The experimental soils represent a wide range of
139
soil properties (e.g. clay content (7 to 62%), soil pH (4.5 to 8.1) and organic carbon (1.1 to
140
8.4%)) and soil types found across Australia9. After air drying, all soils were spiked with
141
arsenate [As (V)] (Na2HAsO4 ) by spraying As solution to a thin layer of soil with continuous
142
mixing using a trowel in a plastic tray. The soils were spiked with up to 1,000 mg As/kg.
143
Spiked soils were placed in 12 L plastic containers and mixed again with a mechanical mixer
144
for 5-10 minutes. All 10 soils were incubated for approximately 3 months with a water
145
content of approximately 60-70% (w/w) of field capacity at room temperature. Additionally,
146
three soils (MG, TA, PB) were spiked on a separate occasion and incubated for 4 weeks.
147
Calculation of a F-test to test whether there was a significant difference between toxicity
148
batches indicates no significant difference in any of the three soils 33. This indicates a good
149
level of reproducibility within the procedure applied in this study. Prior to our toxicity
150
experiments, soils were again air dried, sieved (2 mm) and mixed 34. Soluble orthophosphate
151
was determined in a 1:1 extract (16 h) by the Automated Flow Injection Analysis and
152
molybdate blue colour reaction method.
153
Phytotoxicity assay
154
Each soil treatment was replicated 3 times for the pot study. Air-dried soil was transferred to
155
0.5 L plastic pots lined with fine nylon mesh, as previously reported5. Each pot was placed
156
within a plastic collecting tray to prevent excess leachate watering. Plants were watered by
157
weight using Milli-Q water (18.2 MΩ.cm) to maintain approximately 70-100% of field
158
capacity throughout the study. Cucumber (Cucumis sativa L.) was chosen based on
159
sensitivity to metal(loid)s from a screening study of several plant species. In every pot 10-12
160
cucumber seeds were sown initially to ensure sufficient germination. Ten days later seedlings
161
were thinned to 5 plants per pot. Pots were randomised every second day to minimise the
162
variability of condition effects. After 4 weeks under greenhouse conditions (~16 - 25˚C),
163
plants were harvested and plant shoots were first washed with tap water and then rinsed
ACS Paragon Plus Environment
Page 6 of 28
Page 7 of 28
Environmental Science & Technology
164
several times with Milli-Q water. Washed shoot samples were then dried in an oven at 60˚C
165
for 72 h. Dry weight was measured and shoots were homogenised for measurement of As
166
content in shoots by acid digestion35.
167 168
After harvesting, Milli-Q water was added to approximately each pot’s ‘field’ capacity. Pore-
169
water was collected using Rhizon samplers as previously reported
170
sample was then sub-divided for analysis (pH, DOC, anionic and cationic composition). For
171
analysis of pore-water samples for As and dissolved cations, samples for total aqueous
172
analysis were acidified (pH