Porous Silver Network Hybrid for

Aug 22, 2017 - A three-dimensional cross-linked porous silver network (PSN) is fabricated by silver mirror reaction using polymer foam as the template...
6 downloads 16 Views 2MB Size
Subscriber access provided by Grand Valley State | University

Article

N-doped Porous Carbon Nanofibers/Porous Silver Network Hybrid for High Rate Supercapacitor Electrode Qingshi Meng, Kaiqiang Qin, Liying Ma, Chunnian He, Enzuo Liu, Fang He, Chunsheng Shi, Qunying Li, Jiajun Li, and Naiqin Zhao ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b08610 • Publication Date (Web): 22 Aug 2017 Downloaded from http://pubs.acs.org on August 24, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

N-doped Porous Carbon Nanofibers/Porous Silver Network Hybrid for High Rate Supercapacitor Electrode Qingshi Menga , Kaiqiang Qina, Liying Maa,*, Chunnian Hea,b,c, Enzuo Liua,b, Fang Hea, Chunsheng Shia, Qunying Lia, Jiajun Lia and Naiqin Zhaoa,b,c,*

a

School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350, China

b

Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300350, China c

Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education, Tianjin, 300350, China

AUTHOR INFORMATION Corresponding Author * E-mail: [email protected]. * E-mail: [email protected].

1 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Keywords: N-doped, porous carbon nanofibers, porous silver network, silver mirror reaction, chemical vapor deposition, high rate, supercapacitor

ABSTRACT: A 3D cross-linked porous silver network (PSN) is fabricated by silver mirror reaction using polymer foam as the template. The N-doped porous carbon nanofibers (N-PCNFs) is further prepared on PSN by chemical vapor deposition and treated by ammonia gas subsequently. The PSN substrate serving as the inner current collector will improve the electron transport efficiency significantly. The ammonia gas can not only introduce nitrogen doping into PCNFs, but also increase the specific surface area of PCNFs at the same time. Because of its large surface area (801 m2/g), high electrical conductivity (211 S/cm) and robust structure, the as-constructed N-PCNFs/PSN demonstrates a specific capacitance of 222 F/g at the current density of 100 A/g with a superior rate capability of 90.8% of its initial capacitance ranging from 1 A/g to 100 A/g while applied as the supercapacitor electrode. The symmetric supercapacitor device based on N-PCNFs/PSN displays an energy density of 8.5 W h/kg with power density of 250 W/kg, and excellent cycling stability which attains 103% capacitance retention after 10, 000 charge-discharge cycles at a high current density of 20 A/g, which indicates that N-PCNFs/PSN is a promising candidate for supercapacitor electrode materials.

1. INTRODUCTION In the last decade, considerable research has been dedicated to carbon nanofibers (CNFs) which can be applied as the promising candidate for supercapacitor electrode materials because 2 ACS Paragon Plus Environment

Page 2 of 28

Page 3 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

of

its

low

cost,

light

weight,

high

superior

electrochemical

stability,

and

fast

charging/discharging kinetics as well1-6. However, CNFs-based electric double layer capacitors (EDLCs) usually suffer from the low specific capacitance on account of their intrinsic doublelayer charge storage mechanism which makes use of electrostatic attraction between the electrolyte ions and charges presenting at the electrode surface7-8. In order to strengthen the capacitive performance of carbon nanomaterials, synthesizing porous carbon nanofibers (PCNFs)2,

9-11

or introducing heteroatom (N, B and P etc.) into carbon

frameworks12-17 is an effective strategy. In numerous studies, it has been demonstrated that PCNFs possess a high specific surface area (SSA) which can enhance the double layer charging/discharging capability at the electrode/electrolyte interface18-21. And the nitrogen doping (N-doping) is conducive to increasing the active sites for pseudocapacitance due to the additional surface redox reactions22-25. Moreover, N-doping can dramatically improve the surface wettability of carbon nanomaterials26. Nevertheless, the PCNFs powder needs extra binders or conductive additives when it is assembled into electrodes. The relatively long ion diffusion length and the large charge transfer resistance between the active materials and the current collector inhibit the fast electron transporting and collecting, which leads to an inferior rate capability27-29. In addition, the enhanced interlayer binding energy between the neighboring carbon layers resulted from Ndoping make the nanocarbon framework incline to agglomerate30-32, which can largely reduce the electrochemical performance of the N-doped CNFs. In order to cut down the drawback, many works33-37 so far have focused on combining CNFs with an excellent conductive material, such as graphene, carbon nanosheets, or metal. Silver nanowire, as one-dimensional (1D) metal material with good conductivity and fast charge 3 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

transportation38-42, has attracted more and more attention to improve the electrical conductivity of active materials. However, the addition of binders into electrodes will weaken the effective role of silver nanowire inevitably43-46. Compared to 1D silver nanowire, the three-dimension (3D) porous silver network47-48 (PSN) can form further joints at the crossing points of silver wire. The cross-linked freestanding structure of porous silver network provides a highly conductive path for electrons without extra binders or conductive additives. In this context, we present a facile method to construct a 3D PSN with strong cross-linked structure using polymer foam as the template via silver mirror reaction and annealing process. Furthermore, the N-doped porous carbon nanofibers/porous silver network hybrid film (NPCNFs/PSN) is prepared by chemical vapor deposition (CVD) and treated by ammonia gas subsequently. The 3D cross-linked PSN is capable of forming a freestanding film with N-doped porous carbon nanofibers without any binder. In addition, PSN serving as an inner current collector will afford more rapidly transporting channels for electron, which can greatly reduce the ion diffusion length and prevent the carbon nanofibers from agglomerating effectively. Moreover, on the one hand the ammonia gas treatment introduces nitrogen doping into PCNFs, on the other hand it increases the specific surface area of PCNFs and optimizes the distribution of pore size. As the supercapacitor (SC) electrode material, the N-PCNFs/PSN presents an enhanced capacitive property (245 F/g at 1 A/g) and superior rate capability of 90.8% with the current density increasing from 1 A/g to 100 A/g in a three electrode system. In addition, the twoelectrode symmetric SC device demonstrates a high energy density of 8.5 W h/kg with a power density of 250 W/kg and a remarkable cycling stability (103% capacitance retention after 10000 cycles at 20 A/g), suggesting its potential application in energy storage. 4 ACS Paragon Plus Environment

Page 4 of 28

Page 5 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

2. EXPERIMENTAL SECTION 2.1. Synthesis of porous silver network. The polymer foam purchased from BASF Co. Ltd is usually employed as a household cleaning eraser, which can be directly used in our experiment without any treatment. The synthesis of PSN can be referred to our previous report49 and improved on the base of that. In order to prepare silver ammonia solution, an ammonia solution (25 wt%) was dropwise added to 10 mL silver nitrate solution (20 g/L) until the precipitate just dissolved. Then, 2.5 mL glucose solution (100 g/L) was added to silver ammonia solution and mixed uniformly. A piece of polymer foam with the size of 40 × 20 × 4 mm3 was fully immersed into the above mentioned mixed solution immediately for ten hours in ice water bath. The silver coated polymer foam sample was rinsed in deionized water and dried on the electric heating table at 80 °C for two hours subsequently. Moreover, it was placed in the furnace and annealed at 500 °C for 120 minutes to burn away the polymer template and the PSN was synthesized finally. 2.2. Synthesis of N-doped CNFs/porous silver network hybrid. The PCNFs/PSN was synthesized by CVD using a Ni catalyst. PSN was immersed into alcoholic solution of nickel nitrate (0.01 mol/L) for five minutes and dried on the electric heating table at 80 °C for ten minutes. After that, it was pressed to a thickness of ~110 µm. The as treated PSN was placed in the horizontal tube furnace and heated to 600 °C under Ar (400 sccm) flow. The CNFs growth was in progress with a mixture of Ar (400 sccm), H2 (100 sccm) and C2H2 (10 sccm) for 20 minutes. Subsequently, the furnace was heated directly to 800 °C and the temperature was held for 30 minutes with a mixture of Ar (250 sccm) and NH3 (35 sccm). Finally, the furnace was cooled to room temperature under Ar protection (250 sccm) and the N-PCNFs/PSN hybrid was synthesized as a result. 5 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

For comparison, the N-doped porous carbon nanofibers/carbon foam (N-PCNFs/CF) which has similar structure to N-PCNFs/PSN was synthesized simultaneously. N-PCNFs/CF was synthesized by the growth of CNFs on polymer foam matrix via CVD process. The polymer foam would be carbonized and formed carbon foam at 600 °C with a mixture of Ar, H2 and C2H2. The synthesis process and parameter of the N-PCNFs/CF was consistent with NPCNFs/PSN hybrid. 2.3. Characterization. Scanning electron microscopy (SEM, Hitachi S4800) was used to characterize the morphology and structure of samples. The transmission electron microscopy (TEM) and scanning TEM (STEM) were performed on a FEI Tacnai G2 F20. X-ray diffraction (XRD) patterns were recorded on a Rigaku D/max diffractometer with Cu Kα radiation. Thermogravimetric analysis (TGA) was performed on a TA instruments with the heating rate of 5 °C/min. The Nitrogen adsorption isotherms of samples were measured at 77 K using an autosorb instrument (Quantachrome U.S.). The total surface area was calculated by BET method and the pore size distribution data was calculated based on the adsorption and desorption data using density functional theory (DFT) method. The elemental composition was evaluated by X-ray photoelectron spectroscopy (XPS, PHI5000 VersaProbe). Raman spectra measurement was carried on a LabRAM HR Raman spectrometer using a 514.5 nm argon ion laser source. The electrical conductivity of samples was tested on a RTS-8 four-point probe tester. 2.4. Electrochemical measurements. The electrochemical measurements consist of the cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS, recorded in a frequency range from 0.01 Hz to 100 kHz at the open circuit voltage with a potential amplitude of 5 mV). The electrolyte is 6 M KOH solution. All the electrochemical measurements were performed on a CHI 660D (Chenhua China) electrochemical 6 ACS Paragon Plus Environment

Page 6 of 28

Page 7 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

workstation at room temperature. For a three electrode system, a piece of N-PCNFs/PSN, PCNFs/PSN and N-PCNFs/CF with an area of 0.5 cm2 were used as the working electrode directly. The active material mass loading of N-PCNFs/PSN, CNFs/PSN and N-PCNFs/CF was 1.44 mg/cm2, 1.34 mg/cm2 and 1.55 mg/cm2 respectively. The counter electrode and reference electrode was a platinum plate and Hg/HgO electrode respectively. The specific capacitance of N-PCNFs/PSN,

CNFs/PSN

and

N-PCNFs/CF

were

estimated

from

galvanostatic

charge/discharge curves using the equation: Cs =I∆t/m∆V (1) where Cs, I, ∆t, m, and ∆V represent the specific capacitance (F/g), the discharge current (A), the discharge time (s), the mass of the active material (g) and the potential change (V) within the discharge time respectively. For a two-electrode symmetric SC device, two pieces of N-PCNFs/PSN with same area were used as the working electrodes (both anode and cathode). The energy density and power density of device were calculated from the following equations: Cm =I∆t/M∆V (2) E =(1/7.2)Cm (∆V)2 (3) P=E/∆t (4) where Cm, I, ∆t, M, ∆V, E and P represent the measured device capacitance (F/g), the discharge current (A), the discharge time (s), the total mass of the active material on the two electrodes (g), 7 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

the potential change (V) within the discharge time, the energy density (W h/kg) and the average power density (W/kg), respectively38.

3. RESULTS AND DISCUSSIONS

Figure 1. The fabrication process schematic of N-PCNFs/PSN.

Figure 1 displays the typical fabrication process of N-PCNFs/PSN. Firstly, a freestanding PSN film was fabricated by silver mirror reaction using polymer foam as the substrate. The SEM images in Figure 2a and Figure S1b indicate that the skeleton of polymer foam (Figure S1a) was coated by silver uniformly after silver mirror reaction. Then the cross-linked porous silver network was obtained after removing the polymer foam template by annealing at 500 °C. SEM 8 ACS Paragon Plus Environment

Page 8 of 28

Page 9 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

image shows that PSN consists of silver wire roughly 4.5 µm in diameters (Figure 2b). The crystal phase of PSN was further confirmed by X-ray diffraction. The diffraction pattern of PSN (Figure S2) has five sharp peaks at 38.1°, 44.3°, 64.4°, 77.5° and 81.5°, corresponding to (111), (200), (220), (311) and (222) of silver respectively. The TGA curve (Figure S3) displays that the polymer foam can be burned away completely at 500 °C for 120 minutes in the air. Subsequently, N-PCNFs/PSN hybrid film was prepared by CVD and further treated by NH3. SEM images exhibit the N-CNFs were seamlessly grown on silver wire and the macropores between the silver wires were filled with N-CNFs (Figure 2c and d). TEM image (Figure 2e) reveals that the asprepared N-CNFs exhibit mesoporous structure and the diameter of N-CNFs ranges from 30 to 50 nm. Furthermore, STEM and elemental mapping (Figure 2f) were performed to determine the distribution of carbon and nitrogen, revealing the nitrogen atom doped in carbon nanofibers matrix homogeneously. For comparison, the polymer foam was carbonized to carbon foam and N-PCNFs was directly grown onto the surface of carbon foam (CF) using CVD approach and further treated by NH3. As shown in figure S1c, the N-PCNFs/CF has a similar structure to NPCNFs/PSN. The N-CNFs were grown on carbonized skeleton of polymer foam uniformly. There are some obvious macropores in N-PCNFs/CF. The thickness of N-PCNFs/CF (1245 µm) is much larger than that of PCNFs/PSN and N-PCNFs/PSN (Figure S1d, e). Figure S1f shows the optical image of the as-prepared freestanding PSN and N-PCNFs/PSN hybrid film, which demonstrates their highly flexibility and plasticity.

9 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 28

Figure 2. SEM images of (a) the polymer foam coated with silver, (b) PSN and (c), (d) NPCNFs/PSN. (e) TEM image of N-CNFs. (f) STEM image and elemental mappings exhibiting the distribution of C, N.

To examine the porous nature of N-PCNFs/CF, PCNFs/PSN and N-PCNFs/PSN, nitrogen adsorption-desorption isotherms curves (Figure 3a) were measured and identified as type IV, which has a hysteresis loop at a relative pressure ranging from 0.4 to 0.97. It suggests a narrow 10 ACS Paragon Plus Environment

Page 11 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

mesopore size distribution in Figure 3b. Density functional theory (DFT) analyses show that the mesopore size of N-PCNFs/CF and N-PCNFs/PSN is about 3 - 6 nm, which is larger than that of PCNFs/PSN (3 - 4 nm). The values of specific surface area, total pore volume, micropore surface area and t-method external surface area are listed in Table S1. N-PCNFs/PSN exhibits a micropore surface area of 516.125 m2/g and an external surface area of 285.215 m2/g, which are larger than those of PCNFs/PSN, indicating that NH3 treatment not only increased the number of micropores but also enlarged the diameter of mesoporous. X-ray photoelectron spectroscopy (XPS) was carried out to characterize the elemental composition and clarify the types of nitrogen introduced to the CNFs surface. As shown in Figure 3c, four typical peaks corresponding to the binding energies of C 1s, Ag 3d5, N 1s and O 1s can be observed in the full survey XPS spectra of N-PCNFs/PSN. From the XPS survey spectrum, the nitrogen content in N-PCNFs/CF and N-PCNFs/PSN was calculated to be around 4.08% and 3.27% respectively. The N 1s spectrum can be separated into three peaks which located at 398.2 eV, 399.6eV and 401.2 eV, corresponding to the pyridinic-N, pyrrolic-N and quaternary-N25,

50-52

respectively (Figure 3d). Furthermore, the Raman spectrum of N-

PCNFs/PSN presents two peaks at about 1344 cm-1 and 1595 cm-1 which correspond to the disorder-induced D band and in-plane vibrational G band of carbonaceous materials (Figure S4). Generally, the intensity radio of D peak to G peak (ID/IG) can be applied to evaluate the crystallization of CNFs. The ID/IG of N-PCNFs/PSN (1.12) is higher than that of PCNFs/PSN (0.91), which indicates that there are more defects in the CNFs matrix resulted from the successful introduction of nitrogen atoms.

11 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 28

Figure 3. (a) Nitrogen adorption-desoption isotherms and (b) pore size distribution of NPCNFs/CF, CNFs/PSN and N-PCNFs/PSN. (c) XPS spectra of N-PCNFs/CF, CNFs/PSN and NPCNFs/PSN. (d) N1s spectra of N-PCNFs/PSN

In order to investigate the electrochemical performance of N-PCNFs/PSN, PCNFs/PSN and NPCNFs/CF, cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) measurements were carried out in a three-electrode system with 6 M KOH as the electrolyte. In comparison with N-PCNFs/PSN, the area of CV curve of PSN is negligible, indicating that PSN has less contribution to the capacitance, as shown in Figure 4a. The CV curves of N-PCNFs/PSN (Figure 4b) retain quasi-rectangular shape under the scan rate from 5 mV/s to 1000 mV/s, inferring a 12 ACS Paragon Plus Environment

Page 13 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

superior conductivity of N-PCNFs/PSN. Even at high scan rate of 1000 mV/s, the quasirectangular shape of N-PCNFs/PSN has almost little change, suggesting the rapid ions diffusion in the electrode and the speedy current response to voltage variation. Moreover, the CV curves of N-PCNFs/PSN at various scan rates have much larger area than that of PCNFs/PSN (Figure S5a), indicating that N-PCNFs/PSN has a higher electrochemical capacitive property and nitrogen doping has great contribution to capacity enhancement. For N-PCNFs/CF, the CV curves deviate quasi-rectangular shape when the scan rate reaches up to 200 mV/s (Figure S5b), inferring a rapidly decay of capacitance. The GCD profiles (Figure 4c, S6) of N-PCNFs/PSN at different current densities show the approximate linear line and symmetrical charging curves with their discharging counterpart, demonstrating a good capacitive performance and high reversibility. The specific capacitance of N-PCNFs/PSN is calculated to be 245 F/g at 1 A/g (Figure 4d) which is 3.5 times larger than that of PCNFs/PSN (70 F/g). More importantly, the capacitance of NPCNFs/PSN remains 222 F/g even at a high current density of 100 A/g (90.8% of the initial capacitance at 1 A/g), while the retention capacitance of N-PCNFs/CF is only 13.6% under the current densities from 1 A/g to 50 A/g. As far as we know, such high capacitance and superior rate capability are outstanding with respect to similar CNFs based materials30, 34, 53-60 (Table S2). The electrochemical impedance spectra measurements were also carried out to attain deeper insights regarding internal resistance of the N-PCNFs/PSN. As shown in Figure S7, NPCNFs/PSN displays a semicircle with a diameter of 0.74 Ω at the high frequency region, which is similar to that of PCNFs/PSN (0.68 Ω) and further smaller than that of N-PCNFs/CF (3.91 Ω), suggesting a lower charge transfer resistance. Furthermore, the nearly vertical line at the low frequency region indicates the N-PCNFs/PSN has a superior ion diffusion behavior. In addition, the electrical conductivity of N-PCNFs/PSN measured by four-point probe tester is 211 S/cm, 13 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 28

which is close to that of PCNFs/PSN (189 S/cm) and higher than that of N-PCNFs/CF (0.08 S/cm). It indicates that PSN has an obvious strengthening effect on the electrical conductivity of N-PCNFs. The capacitive performance of N-PCNFs/PSN can be attributed to the combined effect in three main factors: (1) The cross-linked porous silver network provides rapid transmission channels for electrons and effectively prevents PCNFs from agglomerating after nitrogen doping. (2) The introduction of nitrogen atoms affords more active sites for pseudocapacitance. The redox reaction between the pyridine-N and the hydroxyl ions in the electrolyte61 is able to enhance the pseudocapacitance of PCNFs. (3) The ammonia gas treatment increases the specific area of N-PCNFs and further optimizes the distribution of pore size.

14 ACS Paragon Plus Environment

Page 15 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Figure 4. Electrochemical performance of N-PCNFs/PSN, PCNFs/PSN and N-PCNFs/CF measured in a three-electrode system. (a) CV curves at 100 mV/s. (b) CV curves of NPCNFs/PSN with scan rate from 5 mV/s to 1000 mV/s. (c) Galvanostatic charge/discharge profiles of N-PCNFs/PSN at various current densities.

(d) Specific capacitance at various

current densities.

A symmetrical two-electrode device was also built to evaluate the electrochemical performance of N-PCNFs/PSN with 6 M KOH as electrolyte. Figure 5a shows the CV curves of the symmetrical device based on N-PCNFs/PSN at various scan rates. It can be found that the shape of CV curves remains rectangular even at high scan rate of 1000 mV/s, inferring the excellent conductivity and the fast ions diffusion in the N-PCNFs/PSN electrode. Attributed to the construction of cross-linked porous silver network framework which could enhance the electrical conductivity, GCD curves in Figure 5b exhibit approximate triangular shape, indicating the symmetric device has a fast I-V response. The specific capacitance of device is 58.4 F/g at 1A/g, which is comparable to those of previously reported CNFs-based two-electrode devices. Meanwhile, it achieves a remarkable capability retention rate of 75.6% when the current density increases from 1 to 20 A/g (Figure 5c). The capability of retaining high capacitance under ultrafast charging/discharging infers that the symmetrical two-electrode device of N-PCNFs/PSN is a promising candidate for high performance supercapacitor device. As shown in Figure S8, the EIS spectra of symmetrical device show a small semicircle diameter (1.9 Ω) in the high frequency region and a nearly vertical tail in the low frequency region, suggesting the low charge transfer resistance and the excellent ion diffusion behavior. The N-PCNFs/PSN performs high energy density of 8.5 W h/kg with a power density of 250 W/kg (Figure S9), which is higher 15 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 28

than that of other carbon based aqueous supercapacitors such as freestanding porous carbon nanofibers (3.22 W h/kg at a power density of 600 W/kg)57, CNFs/CNTs/PANI ternary composites (5.1 W h/kg at a power density of 10.1 kW/kg)54 and cross-linked N-doped carbon nanofibers network (5.9 W h/kg at a power density of 1200 W/kg)55. Moreover, the cycle stability of device was measured at a current density of 20 A/g by a GCD measurement (Figure 5d). The N-PCNFs/PSN delivers 103% retention of the initial specific capacitance after 10 000 cycles, demonstrating the superb chemical stability of device.

Figure 5. Electrochemical performance of N-PCNFs/PSN measured in a symmetrical twoelectrode system. (a) CV curves at scan rate increasing from 100 mV/s to 1000 mV/s. (b) Galvanostatic charge/discharge curves at various current densities. (c) Specific capacitance at various current densities. (d) Long-cycle performance conducted at 20 A/g.

16 ACS Paragon Plus Environment

Page 17 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

4. CONCLUSION In summary, N-doped carbon nanofibers/porous silver network hybrid has been fabricated via silver mirror reaction and CVD process. The cross-linked freestanding porous silver network provides a fast conduction channel for electrons and greatly enhances the conductivity of PCNFs. Ammonia treatment plays an important role in introducing nitrogen doping, increasing specific surface area and optimizing pore size distribution as well. The combined effect of above mentioned factors makes N-PCNFs/PSN hybrid electrode perform a high rate capability. The capacitance retention of N-PCNFs/PSN can reach 90.8% with the current density increasing from 1 A/g to 100A/g, suggesting its great potential in supercapacitor electrode materials. This study demonstrates that the porous silver network is an ideal substrate for enhancing the conductivity of active materials. Furthermore, the performance of N-PCNFs/PSN can be further enhanced through decorating other active materials (such as conducting polymers or transition metal oxides) on N-CNFs to expand its application in energy storage field.

ASSOCIATED CONTENT Supporting Information Detailed preparation of samples, morphology characterizations for the samples (SEM), physical and chemical characteristics (the XRD, TGA, BET and RAMAN results), and additional electrochemical properties such as CV, GCD, EIS and ragone plot.

17 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 28

Notes The authors declare no competing financial interest. ACKNOWLEDGMENT This work was supported by the Science and Technology Support Programme of Tianjin (No. 16ZXCLGX00110), the National Natural Science Foundation of China (Grant Nos. 51472177, 11474216, and 51272173), and the State Key Program of National Natural Science of China (Grant No. 51531004). REFERENCES 1.

Kim, B. H.; Yang, K. S.; Ferraris, J. P. Highly Conductive, Mesoporous Carbon

Nanofiber Web as Electrode Material for High-Performance Supercapacitors. Electrochim. Acta 2012, 75, 325-331. 2.

Barranco, V.; Lillo-Rodenas, M.; Linares-Solano, A.; Oya, A.; Pico, F.; Ibañez, J.;

Agullo-Rueda, F.; Amarilla, J. M.; Rojo, J. Amorphous Carbon Nanofibers and Their Activated Carbon Nanofibers as Supercapacitor Electrodes. J. Phys. Chem. C 2010, 114, 10302-10307. 3.

Wang, X.; Gao, K.; Shao, Z.; Peng, X.; Wu, X.; Wang, F. Layer-by-Layer Assembled

Hybrid Multilayer Thin Film Electrodes based on Transparent Cellulose Nanofibers Paper for Flexible Supercapacitors Applications. J. Power Sources 2014, 249, 148-155. 4.

Huang, C. W.; Wu, Y. T.; Hu, C. C.; Li, Y. Y. Textural and Electrochemical

Characterization of Porous Carbon Nanofibers as Electrodes for Supercapacitors. J. Power Sources 2007, 172, 460-467.

18 ACS Paragon Plus Environment

Page 19 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

5.

Tran, C.; Kalra, V. Fabrication of Porous Carbon Nanofibers with Adjustable Pore Sizes

as Electrodes for Supercapacitors. J. Power Sources 2013, 235, 289-296. 6.

You, B.; Yang, J.; Sun, Y.; Su, Q. Easy Synthesis of Hollow Core, Bimodal Mesoporous

Shell Carbon Nanospheres and Their Application in Supercapacitor. Chem. Commun. 2011, 47, 12364-12366. 7.

Salanne, M.; Rotenberg, B.; Naoi, K.; Kaneko, K.; Taberna, P. L.; Grey, C.; Dunn, B.;

Simon, P. Efficient Storage Mechanisms for Building Better Supercapacitors. Nat. Energy 2016, 1, 16070-16080. 8.

Zhang, L. L.; Zhao, X. S., Carbon-Based Materials as Supercapacitor Electrodes. Chem.

Soc. Rev. 2009, 38, 2520-2531. 9.

He, H.; Shi, L.; Fang, Y.; Li, X.; Song, Q.; Zhi, L. Mass Production of Multi-Channeled

Porous Carbon Nanofibers and Their Application as Binder-Free Electrodes for HighPerformance Supercapacitors. Small 2014, 10, 4671-4676. 10. Hyun, B. G.; Son, H. J.; Ji, S.; Jang, J.; Hur, S. H.; Park, J. U. Multi-Dimensional Carbon Nanofibers for Supercapacitor Electrodes. J. Electroceram. 2017, 38, 43-50. 11. Liu,

H.

J.;

Wang,

Mesoporous/Microporous

J.;

Carbon

Wang, Derived

C.

X.;

from

Xia,

Y.

Mesoporous

Y.

Ordered

Hierarchical

Titanium-Carbide/Carbon

Composites and Its Electrochemical Performance in Supercapacitor. Adv. Energy Mater. 2011, 1, 1101-1108.

19 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 28

12. Wang, D. W.; Li, F.; Chen, Z. G.; Lu, G. Q.; Cheng, H. M. Synthesis and Electrochemical Property of Boron-Doped Mesoporous Carbon in Supercapacitor. Chem. Mater. 2008, 20, 7195-7200. 13. Zhao, X.; Wang, A.; Yan, J.; Sun, G.; Sun, L.; Zhang, T., Synthesis and electrochemical performance of heteroatom-incorporated ordered mesoporous carbons. Chem. Mater. 2010, 22, 5463-5473. 14. Hulicova-Jurcakova, D.; Seredych, M.; Lu, G. Q.; Bandosz, T. J. Combined Effect of Nitrogen- and Oxygen- Containing Functional Groups of Microporous Activated Carbon on Its Electrochemical Performance in Supercapacitors. Adv. Funct. Mater. 2009, 19, 438-447. 15. You, B.; Yin, P.; An, L. Multifunctional Electroactive Heteroatom-Doped Carbon Aerogels. Small 2014, 10, 4352-4361. 16. Zhang, J.; Chen, G.; Zhang, Q.; Kang, F.; You, B. Self-Assembly Synthesis of N-Doped Carbon Aerogels for Supercapacitor and Electrocatalytic Oxygen Reduction. ACS Appl. Mater. Inter. 2015, 7, 12760-12766. 17. Deng, W.; Zhang, Y.; Yang, L.; Tan, Y.; Ma, M.; Xie, Q. Sulfur-Doped Porous Carbon Nanosheets as an Advanced Electrode Material for Supercapacitors. RSC Adv. 2015, 5, 1304613051. 18. Zhai, Y.; Dou, Y.; Zhao, D.; Fulvio, P. F.; Mayes, R. T.; Dai, S. Carbon Materials for Chemical Capacitive Energy Storage. Adv. Mater. 2011, 23, 4828-4850.

20 ACS Paragon Plus Environment

Page 21 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

19. Fang, Y.; Lv, Y.; Che, R.; Wu, H.; Zhang, X.; Gu, D.; Zheng, G.; Zhao, D. TwoDimensional Mesoporous Carbon Nanosheets and Their Derived Graphene Nanosheets: Synthesis and Efficient Lithium Ion Storage. J. Am. Chem. Soc. 2013, 135, 1524-1530. 20. Lee, J.; Kim, J.; Hyeon, T. Recent Progress in the Synthesis of Porous Carbon Materials. Adv. Mater. 2006, 18, 2073-2094. 21. Zheng, C.; Zhang, J.; Zhang, Q.; You, B.; Chen, G. Three Dimensional Ni FoamSupported Graphene Oxide for Binder-Free Pseudocapacitor. Electrochim. Acta 2015, 152, 216221. 22. Ding, W.; Wei, Z.; Chen, S.; Qi, X.; Yang, T.; Hu, J.; Wang, D.; Wan, L. J.; Alvi, S. F.; Li, L. Space-Confinement-Induced Synthesis of Pyridinic- and Pyrrolic- Nitrogen-Doped Graphene for the Catalysis of Oxygen Reduction. Angew. Chem. Int. Ed. 2013, 125, 1197111975. 23. Wei, W.; Liang, H.; Parvez, K.; Zhuang, X.; Feng, X.; Müllen, K. Nitrogen-Doped Carbon Nanosheets with Size‐Defined Mesopores as Highly Efficient Metal-Free Catalyst for the Oxygen Reduction Reaction. Angew. Chem. Int. Ed. 2014, 126, 1596-1600. 24. Li, Q.; Noffke, B. W.; Wang, Y.; Menezes, B.; Peters, D. G.; Raghavachari, K.; Li, L. S. Electrocatalytic Oxygen Activation by Carbanion Intermediates of Nitrogen-Doped Graphitic Carbon. J. Am. Chem. Soc. 2014, 136, 3358-3361. 25. Jeong, H. M.; Lee, J. W.; Shin, W. H.; Choi, Y. J.; Shin, H. J.; Kang, J. K.; Choi, J. W. Nitrogen-Doped Graphene for High-Performance Ultracapacitors and the Importance of Nitrogen-Doped Sites at Basal Planes. Nano lett. 2011, 11, 2472-2477. 21 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 28

26. Lee, Y. H.; Lee, Y. F.; Chang, K. H.; Hu, C. C. Synthesis of N-Doped Carbon Nanosheets from Collagen for Electrochemical Energy Storage/Conversion Systems. Electrochem. Commun. 2011, 13, 50-53. 27. Mu, J.; Chen, B.; Guo, Z.; Zhang, M.; Zhang, Z.; Shao, C.; Liu, Y. Tin Oxide (SnO2) Nanoparticles/Electrospun Carbon Nanofibers (CNFs) Heterostructures: Controlled Fabrication and High Capacitive Behavior. J. Colloid Interf. Sci. 2011, 356, 706-712. 28. Mu, J.; Chen, B.; Guo, Z.; Zhang, M.; Zhang, Z.; Zhang, P.; Shao, C.; Liu, Y. Highly Dispersed Fe3O4 Nanosheets on One-Dimensional Carbon Nanofibers: Synthesis, Formation Mechanism, and Electrochemical Performance as Supercapacitor Electrode Materials. Nanoscale 2011, 3, 5034-5040. 29. Miao, F.; Shao, C.; Li, X.; Zhang, Y.; Lu, N.; Wang, K.; Liu, Y. One-Dimensional Heterostructures of Beta-Nickel Hydroxide Nanoplates/Electrospun Carbon Nanofibers: Controlled Fabrication and High Capacitive Property. Int. J. Hydrogen Energ. 2014, 39, 1616216170. 30. Duan, B.; Gao, X.; Yao, X.; Fang, Y.; Huang, L.; Zhou, J.; Zhang, L. Unique Elastic NDoped Carbon Nanofibrous Microspheres with Hierarchical Porosity Derived from Renewable Chitin for High Rate Supercapacitors. Nano Energy 2016, 27, 482-491. 31. Tang, C.; Zhang, Q.; Zhao, M. Q.; Huang, J. Q.; Cheng, X. B.; Tian, G. L.; Peng, H. J.; Wei, F. Nitrogen-Doped Aligned Carbon Nanotube/Graphene Sandwiches: Facile Catalytic Growth on Bifunctional Natural Catalysts and Their Applications as Scaffolds for High-Rate Lithium-Sulfur Batteries. Adv. mater. 2014, 26, 6100-6105.

22 ACS Paragon Plus Environment

Page 23 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

32. Tian, Y. H.; Huang, J.; Sheng, X.; Sumpter, B. G.; Yoon, M.; Kertesz, M. Nitrogen Doping Enables Covalent-Like π–π Bonding between Graphenes. Nano lett. 2015, 15, 54825491. 33. Wu, Y.; Liu, S.; Zhao, K.; Yuan, H.; Lv, K.; Ye, G. Facile Synthesis of 3D Graphene Hydrogel/Carbon Nanofibers Composites for Supercapacitor Electrode. ECS Solid State Lett. 2015, 4, M23-M25. 34. Jiang, Y.; Yan, J.; Wu, X.; Shan, D.; Zhou, Q.; Jiang, L.; Yang, D.; Fan, Z. Facile Synthesis of Carbon Nanofibers-Bridged Porous Carbon Nanosheets for High-Performance Supercapacitors. J. Power Sources 2016, 307, 190-198. 35. McDonough, J. R.; Choi, J. W.; Yang, Y.; La Mantia, F.; Zhang, Y.; Cui, Y. Carbon Nanofiber Supercapacitors with Large Areal Capacitances. Appl. Phys. Lett. 2009, 95, 243109. 36. You, B.; Wang, L.; Li, N.; Zheng, C. Improving the Energy Storage Performance of Graphene through Insertion of Pristine CNTs and Ordered Mesoporous Carbon Coating. ChemElectroChem 2014, 1, 772-778. 37. You, B.; Jiang, J.; Fan, S. Three-Dimensional Hierarchically Porous All-Carbon Foams for Supercapacitor. ACS Appl. Mater. Inter. 2014, 6, 15302-15308. 38. Sekhar, S. C.; Nagaraju, G.; Yu, J. S. Conductive Silver Nanowires-Fenced Carbon Cloth Fibers-Supported Layered Double Hydroxide Nanosheets as a Flexible and Binder-Free Electrode for High-Performance Asymmetric Supercapacitors. Nano Energy 2017, 36, 58-67. 39. Sun, Y. Silver Nanowires-Unique Templates for Functional Nanostructures. Nanoscale 2010, 2, 1626-1642. 23 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

40. Yan, Y.; Wang, T.; Li, X.; Pang, H.; Xue, H. Noble Metal-Based Materials in HighPerformance Supercapacitors. Inorg. Chem. Front. 2017, 4, 33-51. 41. Qiao, Z.; Yang, X.; Yang, S.; Zhang, L.; Cao, B. 3D Hierarchical MnO2 Nanorod/Welded Ag-Nanowire-Network Composites for High-Performance Supercapacitor Electrodes. Chem. Commun. 2016, 52, 7998-8001. 42. Lee, J. Y.; Connor, S. T.; Cui, Y.; Peumans, P. Solution-Processed Metal Nanowire Mesh Transparent Electrodes. Nano lett. 2008, 8, 689-692. 43. Wu, S.; Hui, K.; Hui, K. One-Dimensional Core–Shell Architecture Composed of Silver Nanowire@ Hierarchical Nickel-Aluminum Layered Double Hydroxide Nanosheet as Advanced Electrode Materials for Pseudocapacitor. J. Phys. Chem. C 2015, 119, 23358-23365. 44. Yuksel, R.; Coskun, S.; Unalan, H. E. Coaxial Silver Nanowire Network Core Molybdenum Oxide Shell Supercapacitor Electrodes. Electrochim. Acta 2016, 193, 39-44. 45. Yu, Z.; Li, C.; Abbitt, D.; Thomas, J. Flexible, Sandwich-Like Ag-Nanowire/PEDOT: PSS-Nanopillar/MnO2 High Performance Supercapacitors. J. Mater. Chem. A 2014, 2, 1092310929. 46. Yuksel, R.; Coskun, S.; Kalay, Y. E.; Unalan, H. E. Flexible, Silver Nanowire Network Nickel Hydroxide Core-Shell Electrodes for Supercapacitors. J. Power Sources 2016, 328, 167173. 47. Kou, T.; Li, D.; Zhang, C.; Zhang, Z.; Yang, H. Unsupported Nanoporous Ag Catalysts towards CO Oxidation. J. Mol. Catal. A-Chem. 2014, 382, 55-63.

24 ACS Paragon Plus Environment

Page 24 of 28

Page 25 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

48. Lee, M. N.; Mohraz, A. Hierarchically Porous Silver Monoliths from Colloidal Bicontinuous Interfacially Jammed Emulsion Gels. J. Am. Chem. Soc. 2011, 133, 6945-6947. 49. Jiang, B.; He, C.; Zhao, N.; Nash, P.; Shi, C.; Wang, Z. Ultralight Metal Foams. Sci. Rep 2015, 5, 13825. 50. Sahu, V.; Grover, S.; Tulachan, B.; Sharma, M.; Srivastava, G.; Roy, M.; Saxena, M.; Sethy, N.; Bhargava, K.; Philip, D. Heavily Nitrogen Doped, Graphene Supercapacitor from Silk Cocoon. Electrochim. Acta 2015, 160, 244-253. 51. Deng, W.; Zhang, Y.; Tan, Y.; Ma, M. Three-Dimensional Nitrogen-Doped Graphene Derived from Poly-o-phenylenediamine for High-Performance Supercapacitors. J. Electroanal. Chem. 2017, 787, 103-109. 52. Tan, Y.; Xu, C.; Chen, G.; Liu, Z.; Ma, M.; Xie, Q.; Zheng, N.; Yao, S. Synthesis of Ultrathin Nitrogen-Doped Graphitic Carbon Nanocages as Advanced Electrode Materials for Supercapacitor. ACS Appl. Mater. Inter. 2013, 5, 2241-2248. 53. Xie, Q.; Bao, R.; Xie, C.; Zheng, A.; Wu, S.; Zhang, Y.; Zhang, R.; Zhao, P. Core-Shell N-Doped Active Carbon Fiber@ Graphene Composites for Aqueous Symmetric Supercapacitors with High-Energy and High-Power Density. J. Power Sources 2016, 317, 133-142. 54. Miao, F.; Shao, C.; Li, X.; Wang, K.; Lu, N.; Liu, Y. Electrospun Carbon Nanofibers/Carbon Nanotubes/Polyaniline Ternary Composites with Enhanced Electrochemical Performance for Flexible Solid-State Supercapacitors. ACS Sustain. Chem. Eng. 2016, 4, 16891696.

25 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 28

55. Cheng, Y.; Huang, L.; Xiao, X.; Yao, B.; Yuan, L.; Li, T.; Hu, Z.; Wang, B.; Wan, J.; Zhou, J. Flexible and Cross-Linked N-Doped Carbon Nanofiber Network for High Performance Freestanding Supercapacitor Electrode. Nano Energy 2015, 15, 66-74. 56. Ma, L.; Liu, R.; Niu, H.; Xing, L.; Liu, L.; Huang, Y. Flexible and Freestanding Supercapacitor Electrodes Based on Nitrogen-Doped Carbon Networks/Graphene/Bacterial Cellulose with Ultrahigh Areal Capacitance. ACS Appl. Mater. Inter. 2016, 8, 33608-33618. 57. Liu, Y.; Zhou, J.; Chen, L.; Zhang, P.; Fu, W.; Zhao, H.; Ma, Y.; Pan, X.; Zhang, Z.; Han, W. Highly Flexible Freestanding Porous Carbon Nanofibers for Electrodes Materials of High-Performance All-Carbon Supercapacitors. ACS Appl. Mater. Inter. 2015, 7, 23515-23520. 58. Song, L.-T.; Wu, Z.-Y.; Liang, H.-W.; Zhou, F.; Yu, Z.-Y.; Xu, L.; Pan, Z.; Yu, S.-H. Macroscopic-Scale Synthesis of Nitrogen-Doped Carbon Nanofiber Aerogels by TemplateDirected Hydrothermal Carbonization of Nitrogen-Containing Carbohydrates. Nano Energy 2016, 19, 117-127. 59. Sheng, J.; Ma, C.; Ma, Y.; Zhang, H.; Wang, R.; Xie, Z.; Shi, J. Synthesis of Microporous Carbon Nanofibers with High Specific Surface using Tetraethyl Orthosilicate Template for Supercapacitors. Int. J. Hydrogen Energ. 2016, 41, 9383-9393. 60. Chen, L. F.; Zhang, X. D.; Liang, H. W.; Kong, M.; Guan, Q. F.; Chen, P.; Wu, Z. Y.; Yu, S. H. Synthesis of Nitrogen-Doped Porous Carbon Nanofibers as an Efficient Electrode Material for Supercapacitors. ACS nano 2012, 6, 7092-7102.

26 ACS Paragon Plus Environment

Page 27 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

61. Wang, D. W.; Li, F.; Yin, L. C.; Lu, X.; Chen, Z. G.; Gentle, I. R.; Lu, G. Q. M.; Cheng, H. M. Nitrogen-Doped Carbon Monolith for Alkaline Supercapacitors and Understanding Nitrogen-Induced Redox Transitions. Chem.- Eur. J. 2012, 18, 5345-5351.

27 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Table of Contents (TOC)

28 ACS Paragon Plus Environment

Page 28 of 28