Potassium Alkylpentafluorosilicates, Primary Alkyl Radical Precursors

2 hours ago - CAS Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthes...
1 downloads 0 Views 1MB Size
Letter Cite This: Org. Lett. XXXX, XXX, XXX−XXX

pubs.acs.org/OrgLett

Potassium Alkylpentafluorosilicates, Primary Alkyl Radical Precursors in the C‑1 Alkylation of Tetrahydroisoquinolines Teng Wang and Dong-Hui Wang* CAS Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, University of Chinese Academy of Sciences, Shanghai Institute of Organic Chemistry, CAS, 345 Lingling Road, Shanghai 200032, China

Org. Lett. Downloaded from pubs.acs.org by UNIV OF ROCHESTER on 05/13/19. For personal use only.

S Supporting Information *

ABSTRACT: In this study, we demonstrate that potassium alkylpentafluorosilicates (RSiF5K2) are efficient primary alkyl radical precursors for selective C(sp3)−C(sp3) bond-forming reactions. RSiF5K2 reagents are white, free-flowing solids and are moisture and air stable. This class of reagents enables the direct C-1 alkylation of tetrahydroisoquinolines under mild conditions via single-electron transfer. The broad substrate scope of both alkylpentafluorosilicates and tetrahydroisoquinolines is tolerated in this transformation. Both radical scavenger and EPR capture experiments show that the primary radical is generated by the oxidation of RSiF5K2. A mechanism involving alkyl radical addition to an iminium salt followed by reduction by an amine is proposed.

F

Scheme 1. Hypervalent silicates as radical precursors

ree radical couplings that proceed via single-electron transfer (SET) under metal-mediated redox conditions1 or photoredox catalysis2 have emerged as a uniquely effective mode of reactivity for selective C(sp2)−C(sp3) bond formation in synthetic chemistry. However, the radical intermediates in such processes and their corresponding precursors are limited mainly to secondary and tertiary C-centered alkyl variants. This is due to the fact that the precursors have lower disassociation energy and the radical intermediates have inherently higher stability than in the case of primary variants. Though some classical organometallic compounds, such as organotins and organolithiums, and more recently developed progenitors, including organoborons,3 peroxides,4 carboxylic acids and their derivatives,5 alkyl halides,6 and others,7 can be readily converted into primary alkyl radicals, some of them require special substitution patterns to stabilize the corresponding radical, and some of these approaches also lack functional group tolerance. There is high demand for developing practical precursors for primary C-centered radicals. In parallel, achieving controllable transformations with primary alkyl radicals, such as C(sp3)− C(sp3) coupling, is also a pertinent challenge. To this end, the Molander and Fensterbank laboratories have recently reported that primary alkyl hypervalent silicates are efficient C-based radical precursors.8 In their preliminary reports, primary alkyl radicals were successfully generated from the stabilized bis(catecholato)silicates under photoredox conditions with Ir or Ru catalysts (Scheme. 1a). The resulting primary alkyl radicals were then demonstrated to be competent in C(sp2)−C(sp3) bond-forming reactions, such as addition to alkenes, and cross-coupling with vinyl halides or aryl bromides, as well as viable initiators for the cross-coupling of thiols and aryl bromides. Inspired by these reports, we envisioned that alternative hypervalent silicate radical precursor that are atom-economic, © XXXX American Chemical Society

environmentally friendly, nontoxic, simple to prepare, and convenient to handle would broaden the utility of such reagents in the synthesis of C−C bonds, especially in the construction of C(sp3)−C(sp3) bonds. To achieve this goal, we focused on potassium alkylpentafluorosilicates (RSiF5K2). Though Kumada and others have previously observed the generation of carboncentered radicals from RSiF5K2 upon treatment with stoichiometric quantities of CuIIX2, halogens, or NBS, these primary Received: March 30, 2019

A

DOI: 10.1021/acs.orglett.9b01124 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters Table 1. Optimization of the Reaction Conditionsa

entry

[Cu]

1 2 3 4 5 6 7 8 9 10 11 12 13 14c

CuBr CuBr CuBr CuBr Cu(OTf)2 Cu(OTf)2 CuCl2 Cu(OTf)2 Cu(OTf)2 Cu(OTf)2 Cu(OTf)2 Cu(OTf)2 Cu(OTf)2

oxidant TBHP (aq) TBHP (aq) DTBP DTBP DTBP

PTC

additive

TBAI TBAF TBAF TBAF TBAF TBAF TBAF TBAF TBAF TBAF TBAF

Et3N Et3N Et2NH tBuNH2 Et2NH Et2NH Et2NH Et2NH, H2O

base

solvent

yieldb (%)

NaOAc NaOAc·3H2O KHCO3 KHCO3

DCE DCE CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4 CCl4

0 >5 ( 2) 39 67 66 0 63 46 65 52 52 69 72 (67) 88 (82)

a

Reaction conditions: 1a (0.3 mmol), 2a (1.2 mmol), oxidant (2.2 equiv), TBAF (10 mol %), base (2 equiv), additive (3 equiv), CCl4 (2 mL), 80 °C, N2. bYields were determined by 1H NMR spectra of crude reaction mixtures with Ph3CH as internal standard. Isolated yields are in parentheses. cH2O (3 equiv) was added.

reductants, such as amines, were necessary for reducing the intermediate to the final product.13 Thus, diethylamine was identified as a suitable additive, and the desired product was achieved in 69% yield (Table 1, entry 12). Various copper salts were screened, among which Cu(OTf)2 was found to be the most efficient. Interestingly, we found that the addition of inorganic base and H2O could further improve the transformation; thus, KHCO3 and 3 equiv of H2O together provided 82% isolated yield (Table 1, entries 11−13). A plausible explanation is that water might promote the transformation or simply increase the solubility of the silicate salts in the reaction, and a similar water effect has also observed for potassium organotrifluoroborates (RBF3K).14 Having identified the optimal conditions, we next examined the substrate scope of organopentafluorosilicate reagents as primary radical precursors using N-phenyl tetrahydroisoquinoline (1a) (Table 2) as a model substrate. First, the reactivity of various phenethyl pentafluorosilicates was tested (2a−2h). We found that these pentafluorosilicates reacted smoothly with 1a to provide the desired alkylation products in moderate to good yields (3a−3h, respectively). In all of these cases, the products resulted exclusively from 2-phenethyl radical addition to 1a, with no evidence of formation of the corresponding 1-phenethyl (i.e., benzyl)-substituted products.15 Multiple functional groups on the aryl ring of the phenethylsilicates, such as Me (3b), OMe (3c, and 3d), halogens F, Cl, Br, (3e−3g), and ester (3h), were compatible with the mild reaction conditions and afforded the C(sp3)−C(sp3)-coupled products in good yields. These functional groups provide an additional handle for further synthetic elaboration. Additionally, benzyl pentafluorosilicates (2i−2k) that contain substituents are also compatible for this C(sp3)− C(sp3) bond-forming reaction, providing the desired products in moderate yields (3i−3k). Furthermore, 3-phenylpropyl silicate (2l) reacted readily with 1a to provide the desired product (3l) in moderate yield. At last, we examined the compatibility of purely aliphatic pentafluorosilicates in this transformation. It turned out that ethyl, 2-carbonylhexyl, ethoxymethyl, and glycomethyl petafluorosilicates reacted successfully with the

radicals could only be trapped by a few select reaction partners, including the counteranions of the CuII salts, alcoholic solvents, or actived alkenes, in reasonable yields (Scheme 1b).9 Methods that utilize primary alkyl radicals generated from RSiF5K2 precursors in selective C(sp3)−C(sp3) bond formation are rare.10 We further envisioned that such species would be well-suited for traditionally challenging C(sp3)−H functionalization for C(sp3)−C(sp3) bond formation11 in a catalytic cycle in which a tertiary amine is oxidized to the corresponding iminium salts followed by primary radical addition.12 Herein, we report a Cu(II)-mediated coupling of N-aryl tetrahydroisoquinolines at the C−1 position with RSiF5K2, forming C(sp3)−C(sp3) bonds under mild conditions via SET (Scheme. 1c). In this reaction, alkyl pentafluorosilicates (RSiF5K2) are demonstrated to be efficient primary C-centered radical precursors. We initiated our study by investigating the reaction of Nphenyl tetrahydroisoquinoline (1a) with potassium phenethylpentafluorosilicate (2a). Encouragingly, the desired product 3a was obtained in the presence of 30 mol % CuBr and 2 equiv of TBHP (5.5 M in decane) in anhydrous dichloromethane under N2 atmosphere for 11 h, albeit only in 2% isolated yield (Table 1, entry 2). When we switched to CCl4 as solvent and DTBP as oxidant, 39% conversion was observed (entry 3). Increasing CuBr to 50 mol % catalyst loading and using 3 equiv of oxidant further improved the conversion (entry 4). Phosphine- or pyridine-type ligands, which are generally used to promote Cucatalyzed reactions, inhibited this transformation. When a phasetransfer reagent was introduced to the reaction mixture, the yield increased. TBAF afforded 66% yield of 3a after 8 h at 80 °C (entry 5); however, the reaction was contaminated with trace quantities of a byproduct that resulted from the coupling of the tert-butoxyl radical (from oxidant DTBP, di-tert-butyl peroxide) with 1a at the C-1 position. This observation prompted us to consider the use of stoichiometric Cu(II) as oxidant. Use of 2.2 equiv of Cu(OTf)2 alone did not afford any desired product (Table 1, entry 6). After considering the mechanistic features of the reaction (vide infra), we realized that single-electron B

DOI: 10.1021/acs.orglett.9b01124 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters Table 2. Scope of Organopentafluorosilicatesa

Table 3. Scope of N-Phenyl Tetrahydroisoquinolinesa

a

Reaction conditions: 1a (0.3 mmol), 2 (1.2 mmol), Cu(OTf)2 (0.66 mmol), TBAF (0.03 mmol), Et2NH (0.9 mmol), KHCO3 (0.6 mmol), H2O (0.9 mmol), CCl4 (2 mL), N2, 80 °C, 8 h. bAir, 60 °C, 36 h. c60 °C, 36 h. dAir, 60 °C, 12 h.

isoquinonline substrate and delivered the desired C(sp3)− C(sp3) cross-coupled products in moderate to good yields (3m− 3p). These examples show that organopentafluorosilicate reagents are reliable precursors for generating the corresponding C-centered primary radicals. We next probed the scope of tetrahydroisoquinolines (1) with potassium phenethylpentafluorosilicates (2a) (Table 3). A variety of N-aryl tetrahydroisoquinoline substrates (1b−1p) reacted smoothly with 2a to afford C(sp3)−C(sp3) crosscoupled products in moderate to good yields. Substrates bearing substituents on the N-aryl ring, including methyl (4a−4c), trifluoromethoxyl (4d), halogens such as fluoro (4e, and 4f), chloro (4g), and bromo (4h), carbonyl (4i), and esters (4j), afforded the desired products in good yields. A strongly electronwithdrawing group, namely CF3, is also tolerated (4k), albeit in low yield. Substituents on the tetrahydroisoquinoline ring, such as chloro (4l), methoxyl (4m), phenyl (4n), and alkynyl (4o), were well tolerated in the reaction, providing moderate to good yields (4l−4o). This protocol is good for gram-scale uses. For example, the reaction of 1.2 g of 1a (6 mmol) with 2a affords 1.48 g of 3a in 79% yield (eq 1). Similarly, the reaction between 1.37 g of 1e and 2a affords 1.62 g of the desired product, 4e, in 82% isolated yield (eq 2). To understand the reaction mechanism, a radical scavenger test was conducted. When pentafluorosilicate 2a was stirred with 2,2,6,6-tetramethylpiperidine N-oxide (TEMPO) in the presence of catalytic CuBr2 and 3 equiv of di-tert-butyl peroxide (DTBP) in THF at 80 °C, we isolated 55% yield of 2,2,6,6-

a

Reaction conditions: 1a (0.3 mmol), 2 (1.2 mmol), Cu(OTf)2 (0.66 mmol), TBAF (0.03 mmol), Et2NH (0.9 mmol), KHCO3 (0.6 mmol), H2O (0.9 mmol), CCl4 (2 mL), N2, 80 °C, 8 h. bThe organopentafluorosilicate was added in two batches.

tetramethyl-1-phenethoxypiperidine 5 (eq 3). Moreover, under analogous conditions, 2a was found to undergo Minisci-type C2alkylation of a representative pyridine substrate (eq 4). These results are consistent with a mechanism in which the alkyl pentafluorosilicate serves as a C-centered radical precursor in the coupling reaction. To gain more insight into the redox chemistry involved in this reaction, we next performed EPR capture experiments. When 2a, Cu(OTf)2, and phenyl tert-butyl nitrone (PBN, a spin-trapping C

DOI: 10.1021/acs.orglett.9b01124 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters

g = 2.00636, αN = 13.90G, and αH = 1.78G. Taking these results together, we can conclude that a C-centered primary free radical is involved in the reaction. This radical then plays an important role in C-1-selective C(sp3)−C(sp3) bond formation.17 Though elucidating the full mechanistic details remains the goal of ongoing investigations, based on the preliminary observations above, we propose a radical SET pathway for this transformation (Figure 2). Tetrahydroisoquinoline is oxidized

reagent) were stirred in CCl4 at 80 °C for 2 h, the EPR signal clearly indicated formation of a PBN adduct, R(Ph)CHN(•OC)tBu (Figure 1a, red line), in which g = 2.00632, αN =

Figure 2. Proposed reaction mechanism.

by Cu(II) to provide radical cation A,18 which then affords iminium salt B through homolytic hydrogen-atom abstraction.19 The organopentafluorosilicate is oxidized by Cu(II) via SET to provide silicon-centered radical C,20 which affords carboncentered alkyl radical D by releasing SiF5− or SiF4; attack of carbon-centered radical D on to the iminium ion B provides radical cation E, which is then reduced with an electron from diethyl amine to provide the final product. In conclusion, we show that potassium alkylpentafluorosilicates (RSiF5K2) are an effective class of precursors for generating carbon-centered primary alkyl free radicals under mild oxidative conditions using stoichiometric copper(II). The resultant primary alkyl radical can be effectively trapped by an imium ion generated from N-phenyl tetrahydroisoquinoline at the C−1 position to afford a C(sp3)−C(sp3) cross-coupled product in moderate to good yields. We also trapped the primary radicals with a radical scavenger and performed EPR experiment to support the involvement of a radical intermediate. Organopentafluorosilicates are easily prepared on large scale, and they are generally air- and moisture-stable, nontoxic, free-flowing white solids, making them a valuable addition to the toolkit of primary alkyl radical precursors in synthetic chemistry.



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.orglett.9b01124. Experimental procedures, and characterization data and spectra of new compounds (PDF)



Figure 1. EPR capture tests. (a) EPR test for the alkyl pentafluorosilicate. (b) EPR test for the C-1 alkylation reaction mixture.

AUTHOR INFORMATION

Corresponding Author

13.98G, and αH = 1.69G. However, in the control experiment (i.e., in the absence of 2a), no radical adduct was observed (Figure 1a, black line). It should be noted that the R group in the spin-adduct product, R(Ph)CHN(•OC)tBu, may be two different groups. One possibility is the phenethyl moiety, as would be expected from radical generation via oxidation of RSiF5K2 by CuII. The other possibility would result from addition of •CCl3 radical that is generated from the Cl abstraction of CCl4 by the phenethyl radical.16 Next, we added PBN under the standard reaction conditions, and in this case, we observed a similar alkyl radical spin adduct (Figure 1b) for which

*E-mail: [email protected]. ORCID

Dong-Hui Wang: 0000-0002-4318-5450 Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS We acknowledge support from the National Key R&D Program of China (2016YFA0202900), the Strategic Priority Research D

DOI: 10.1021/acs.orglett.9b01124 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters

Qiao, W.; Sun, L.; Collins, M. R.; Fadeyi, O. O.; Gallego, G. M.; Mousseau, J. J.; Nuhant, P.; Baran, P. S. Science 2018, 360, 75. Alkyl-1,4dihydropyridines: (h) Gutierrez-Bonet, A.; Tellis, J. C.; Matsui, J. K.; Vara, B. A.; Molander, G. A. ACS Catal. 2016, 6, 8004. (i) Phelan, J. P.; Lang, S. B.; Sim, J.; Berritt, S.; Peat, A. J.; Billings, K.; Fan, L.; Molander, G. A. J. Am. Chem. Soc. 2019, 141, 3723. (j) Buzzetti, L.; Prieto, A.; Roy, S. R.; Melchiorre, P. Angew. Chem., Int. Ed. 2017, 56, 15039. (8) (a) Corcé, V.; Chamoreau, L.-M.; Derat, E.; Goddard, J.-P.; Ollivier, C.; Fensterbank, L. Angew. Chem., Int. Ed. 2015, 54, 11414. (b) Jouffroy, M.; Primer, D. N.; Molander, G. A. J. Am. Chem. Soc. 2016, 138, 475. (c) Patel, N. R.; Kelly, C. B.; Jouffroy, M.; Molander, G. A. Org. Lett. 2016, 18, 764. (d) Patel, N. R.; Kelly, C. B.; Siegenfeld, A. P.; Molander, G. A. ACS Catal. 2017, 7, 1766. (e) Lang, S. B.; Wiles, R. J.; Kelly, C. B.; Molander, G. A. Angew. Chem., Int. Ed. 2017, 56, 15073. (f) Zheng, S.; Primer, D. N.; Molander, G. A. ACS Catal. 2017, 7, 7957. (9) (a) Tamao, K.; Yoshida, J.; Yamamoto, H.; Kakui, T.; Matsumoto, H.; Takahashi, M.; Kurita, A.; Murata, M.; Kumada, M. Organometallics 1982, 1, 355. (b) Yoshida, J.; Tamao, K.; Kakui, T.; Kurita, A.; Murata, M.; Yamada, K.; Kumada, M. Organometallics 1982, 1, 369. (10) (a) Chenneberg, L.; Lévêque, C.; Corcé, V.; Baralle, A.; Goddard, J.-P.; Ollivier, C.; Fensterbank, L. Synlett 2016, 27, 731. (b) Zhang, Q.W.; An, K.; Liu, L.-C.; Zhang, Q.; Guo, H.; He, W. Angew. Chem., Int. Ed. 2017, 56, 1125. (11) For successful C−H activation reviews, albeit suffering from harsh conditions or poor functional groups tolerance, see: (a) He, G.; Wang, B.; Nack, W. A.; Chen, G. Acc. Chem. Res. 2016, 49, 635. (b) He, J.; Wasa, M.; Chan, K. S. L.; Shao, Q.; Yu, J.-Q. Chem. Rev. 2017, 117, 8754. (12) (a) Li, Z.; Bohle, D. S.; Li, C.-J. Proc. Natl. Acad. Sci. U. S. A. 2006, 103, 8928. (b) Zhao, L.; Li, C.-J. Angew. Chem., Int. Ed. 2008, 47, 7075. (c) Huo, C.; Wu, M.; Jia, X.; Xie, H.; Yuan, Y.; Tang, J. J. Org. Chem. 2014, 79, 9860. (d) Wang, T.; Schrempp, M.; Berndhäuser, A.; Schiemann, O.; Menche, D. Org. Lett. 2015, 17, 3982. For a review, see: (e) Li, C.-J. Acc. Chem. Res. 2009, 42, 335. (13) For amine as electron donor, see: (a) Shaw, M. H.; Shurtleff, V. W.; Terrett, J. A.; Cuthbertson, J. D.; MacMillan, D. W. C. Science 2016, 352, 1304. (b) Davies, J.; Booth, S. G.; Essafi, S.; Dryfe, R. A. W.; Leonori, D. Angew. Chem., Int. Ed. 2015, 54, 14017. (c) Duan, Z.; Li, W.; Lei, A. Org. Lett. 2016, 18, 4012. (14) A similar water effect was also observed for potassium organotrifluoroborates (RBF3K). For mechanism details, see: (a) Molander, G. A.; Ellis, N. Acc. Chem. Res. 2007, 40, 275. (b) Lennox, A. J. J.; Lloyd-Jones, G. C. J. Am. Chem. Soc. 2012, 134, 7431. (c) Liu, Z.; Chao, D.; Li, Y.; Ting, R.; Oh, J.; Perrin, D. M. Chem. - Eur. J. 2015, 21, 3924. (d) Molander, G. A. J. Org. Chem. 2015, 80, 7837. (15) Slaugh, L. H. J. Am. Chem. Soc. 1959, 81, 2262. (16) Gregg, R. A.; Mayo, F. R. J. Am. Chem. Soc. 1948, 70, 2373. (17) The cationic radical A might be stabilized by CuI by forming a radical−CuI complex. See: Ahn, J. M.; Ratani, T. S.; Hannoun, K. I.; Fu, G. C.; Peters, J. C. J. Am. Chem. Soc. 2017, 139, 12716. (18) (a) Li, Z.; Li, C.-J. J. Am. Chem. Soc. 2004, 126, 11810. (b) Boess, E.; Sureshkumar, D.; Sud, A.; Wirtz, C.; Farès, C.; Klussmann, M. J. Am. Chem. Soc. 2011, 133, 8106. (19) Xu, P.; Wang, F.; Fan, G.; Xu, X.; Tang, P. Angew. Chem., Int. Ed. 2017, 56, 1101. (20) (a) Jin, J.; MacMillan, D. W. C. Nature 2015, 525, 87. (b) Li, G.X.; Morales-Rivera, C. A.; Wang, Y.; Gao, F.; He, G.; Liu, P.; Chen, G. Chem. Sci. 2016, 7, 6407. (c) Mai, D. N.; Baxter, R. D. Org. Lett. 2016, 18, 3738.

Program of the Chinese Academy of Sciences (XDB20000000), and the CNSF 21871286.



REFERENCES

(1) (a) Sorin, G.; Martinez Mallorquin, R.; Contie, Y.; Baralle, A.; Malacria, M.; Goddard, J.-P.; Fensterbank, L. Angew. Chem., Int. Ed. 2010, 49, 8721. (b) Fujiwara, Y.; Domingo, V.; Seiple, I. B.; Gianatassio, R.; Del Bel, M.; Baran, P. S. J. Am. Chem. Soc. 2011, 133, 3292. (c) Liu, Y.; Yi, H.; Lei, A. Chin. J. Chem. 2018, 36, 692. (2) For reviews, see: (a) Prier, C. K.; Rankic, D. A.; MacMillan, D. W. C. Chem. Rev. 2013, 113, 5322. (b) Romero, N. A.; Nicewicz, D. A. Chem. Rev. 2016, 116, 10075. (c) Staveness, D.; Bosque, I.; Stephenson, C. R. Acc. Chem. Res. 2016, 49, 2295. (d) Skubi, K. L.; Blum, T. R.; Yoon, T. P. Chem. Rev. 2016, 116, 10035. (e) Larsen, C. B.; Wenger, O. S. Chem. - Eur. J. 2018, 24, 2039. (f) Koike, T.; Akita, M. Inorg. Chem. Front. 2014, 1, 562. (3) (a) Matsui, J. K.; Primer, D. N.; Molander, G. A. Chem. Sci. 2017, 8, 3512. (b) Li, Z.; Wang, Z.; Zhu, L.; Tan, X.; Li, C. J. Am. Chem. Soc. 2014, 136, 16439. (c) Xu, G.; Lüthy, M.; Habegger, J.; Renaud, P. J. Org. Chem. 2016, 81, 1506. For a review, see: (d) Tellis, J. C.; Kelly, C. B.; Primer, D. N.; Jouffroy, M.; Patel, N. R.; Molander, G. A. Acc. Chem. Res. 2016, 49, 1429. (e) Li, G.-X.; Morales-Rivera, C. A.; Wang, Y.; Gao, F.; He, G.; Liu, P.; Chen, G. Chem. Sci. 2016, 7, 6407. (f) Shu, C.; Noble, A.; Aggarwal, V. K. Angew. Chem., Int. Ed. 2019, 58, 3870. (4) Qian, B.; Chen, S.; Wang, T.; Zhang, X.; Bao, H. J. Am. Chem. Soc. 2017, 139, 13076. (5) (a) Tan, X.; Liu, Z.; Shen, H.; Zhang, P.; Zhang, Z.; Li, C. J. Am. Chem. Soc. 2017, 139, 12430. (b) Liu, Z.-J.; Lu, X.; Wang, G.; Li, L.; Jiang, W.-T.; Wang, Y.-D.; Xiao, B.; Fu, Y. J. Am. Chem. Soc. 2016, 138, 9714. (c) Jian, W.; Ge, L.; Jiao, Y.; Qian, B.; Bao, H. Angew. Chem., Int. Ed. 2017, 56, 3650. (d) Qin, T.; Cornella, J.; Li, C.; Malins, L. R.; Edwards, J. T.; Kawamura, S.; Maxwell, B. D.; Eastgate, M. D.; Baran, P. S. Science 2016, 352, 801. (e) Huihui, K. M. M.; Caputo, J. A.; Melchor, Z.; Olivares, A. M.; Spiewak, A. M.; Johnson, K. A.; DiBenedetto, T. A.; Kim, S.; Ackerman, L. K. G.; Weix, D. J. J. Am. Chem. Soc. 2016, 138, 5016. (f) Qin, T.; Malins, L. R.; Edwards, J. T.; Merchant, R. R.; Novak, A. J. E.; Zhong, J. Z.; Mills, R. B.; Yan, M.; Yuan, C.; Eastgate, M. D.; Baran, P. S. Angew. Chem., Int. Ed. 2017, 56, 260. (g) Smith, J. M.; Qin, T.; Merchant, R. R.; Edwards, J. T.; Malins, L. R.; Liu, Z.; Che, G.; Shen, Z.; Shaw, S. A.; Eastgate, M. D.; Baran, P. S. Angew. Chem., Int. Ed. 2017, 56, 11906. (6) (a) Shen, H.; Liu, Z.; Zhang, P.; Tan, X.; Zhang, Z.; Li, C. J. Am. Chem. Soc. 2017, 139, 9843. (b) Cheng, Y.; Mück-Lichtenfeld, C.; Studer, A. Angew. Chem., Int. Ed. 2018, 57, 16832. (c) Atack, T. C.; Cook, S. P. J. Am. Chem. Soc. 2016, 138, 6139. (d) Rezazadeh, S.; Devannah, V.; Watson, D. A. J. Am. Chem. Soc. 2017, 139, 8110. (e) Hatakeyama, T.; Nakagawa, N.; Nakamura, M. Org. Lett. 2009, 11, 4496. (f) Paul, A.; Smith, M. D.; Vannucci, A. K. J. Org. Chem. 2017, 82, 1996. (g) Hazra, A.; Lee, M. T.; Chiu, J. F.; Lalic, G. Angew. Chem., Int. Ed. 2018, 57, 5492. (h) Kurandina, D.; Parasram, M.; Gevorgyan, V. Angew. Chem., Int. Ed. 2017, 56, 14212. (i) Wang, G.-Z.; Shang, R.; Cheng, W.-M.; Fu, Y. J. Am. Chem. Soc. 2017, 139, 18307. (j) Zhou, W.J.; Cao, G.-M.; Shen, G.; Zhu, X.-Y.; Gui, Y.-Y.; Ye, J.-H.; Sun, L.; Liao, L.-L.; Li, J.; Yu, D.-G. Angew. Chem., Int. Ed. 2017, 56, 15683. (k) Zhou, Q.-Q.; Düsel, S. J. S.; Lu, L.-Q.; König, B.; Xiao, W.-J. Chem. Commun. 2019, 55, 107. (7) For hypervalent iodines, see: (a) Wang, Y.; Zhang, L.; Yang, Y.; Zhang, P.; Du, Z.; Wang, C. J. Am. Chem. Soc. 2013, 135, 18048. For alkylpyridiniums, see: (b) Basch, C. H.; Liao, J.; Xu, J.; Piane, J. J.; Watson, M. P. J. Am. Chem. Soc. 2017, 139, 5313. (c) Wu, J.; He, L.; Noble, A.; Aggarwal, V. K. J. Am. Chem. Soc. 2018, 140, 10700. (d) Wu, J.; Grant, P. S.; Li, X.; Noble, A.; Aggarwal, V. K. Angew. Chem., Int. Ed. 2019, 58, 5697. For other recent reports in primary alkyl radical precursors, see the following. Alkyl sulfinates: (e) Fujiwara, Y.; Dixon, J. A.; O’Hara, F.; Funder, E. D.; Dixon, D. D.; Rodriguez, R. A.; Baxter, R. D.; Herlé, B.; Sach, N.; Collins, M. R.; Ishihara, Y.; Baran, P. S. Nature 2012, 492, 95. (f) Smith, J. M.; Dixon, J. A.; deGruyter, J. N.; Baran, P. S. J. Med. Chem. 2019, 62, 2256. Alkyl sulfones: (g) Merchant, R. R.; Edwards, J. T.; Qin, T.; Kruszyk, M. M.; Bi, C.; Che, G.; Bao, D.-H.; E

DOI: 10.1021/acs.orglett.9b01124 Org. Lett. XXXX, XXX, XXX−XXX