Practical Syntheses of 13-O-[(2-Methoxyethoxy ... - ACS Publications

Jun 13, 1997 - The successful selective manipulation of silyl protecting groups on ivermectin aglycon led to the facile preparation of 5,7-O-bis-silyl...
0 downloads 0 Views 198KB Size
J. Org. Chem. 1997, 62, 3989-3993

3989

Practical Syntheses of 13-O-[(2-Methoxyethoxy)methyl]-22,23-dihydroavermectin B1 Aglycon [Dimedectin Isopropanol, MK-324] and 13-epi-O-(Methoxymethyl)-22,23-dihydroavermectin B1 Aglycon [L-694,554], Flea Active Ivermectin Analogues Raymond J. Cvetovich,* Chris H. Senanayake,† Joseph S. Amato, Lisa M. DiMichele, Timothy J. Bill, Robert D. Larsen, R. F. Shuman, Thomas R. Verhoeven, and Edward J. J. Grabowski Department of Process Research, Merck Research Laboratories, Division of Merck & Co., Inc., P.O. Box 2000, Rahway, New Jersey 07065 Received February 3, 1997X

Practical high yielding syntheses of 13-O-[(2-methoxyethoxy)methyl]-22,23-dihydroavermectin B1 aglycon (dimedectin 2-propanol, MK-324, 1) and 13-epi-O-(methoxymethyl)-22,23-dihydroavermectin B1 aglycon (L-694,554, 2), both potent flea insecticides, from ivermectin are presented. The successful selective manipulation of silyl protecting groups on ivermectin aglycon led to the facile preparation of 5,7-O-bis-silyl-22,23-dihydroavermectin B1 aglycon 7 as the key intermediate for the large scale syntheses of these compounds. Development of a dual pyridine/tertiary amine system for mesylation of the C-13R hydroxyl group of 7 and subsequent displacement with cesium propionate-propionic acid led to the successful inversion of the 13-hydroxy group. The avermectins1a and the related milbemycins,1b 16membered macrolides produced by Streptomyces avermitilis or Streptomyces hygroscopicus, respectively, are potent anthelmintic and insecticidal compounds used in agriculture, animals, and man. Some of the commercialized successes of this class of compounds are: Agrimec, Ivomec, Doramectin, Interceptor, Cydectin, and Milbeknock. Among the many efforts to improve the biological profile and reduce toxicity in animals and humans of avermectins, analogues modified at the C-13 position were prepared.2 In addition, C-13 epi-avermectin analogues were investigated in the search for improved safety margins.3 Among the structural variations examined, those exhibiting interesting insecticidal activity are 13-O-[(2-methoxyethoxy)methyl]-22,23-dihydroavermectin B1 aglycon (MK-324, 1)2 and 13-epi-O-(methoxymethyl)-22,23-dihydroavermectin B1 aglycon (L-694,554, 2, Figure 1) which are active agents for the control of flea infestations in dogs. Results and Discussion Published procedures on the preparation of MK-3242 relied on (2-methoxyethoxy)methyl (MEM) derivatization of the monoprotected 5-O-tert-butyldimethylsilyl(TBDMS)22,23-dihydroavermectin B1 aglycon 4. This approach gave rise to the formation of significant amounts of bisMEM derivative 5, requiring conventional preparative silica gel column chromatography to remove this undesirable byproduct. Attempts were made to selectively † Current address: Sepracor Inc., Department of Pharmaceuticals, 111 Locke Dr., Marlborough, MA 01752. X Abstract published in Advance ACS Abstracts, May 15, 1997. (1) (a) Albers-Scho¨nberg, G.; Arison, B. H.; Chabala, J. C.; Douglas, A. W.; Eskola, P.; Fisher, M. H.; Mrozik, H.; Smith, J. L.; Tolman, R. L. J. Am. Chem. Soc. 1981, 103, 4216. (b) Takiguchi, J.; Mihima, H.; Okuda, M.; Terao, M.; Aoki, A.; Fukuda, R. J. Antibiot. 1980, 33, 1120. (2) Mrozik, H.; Linn, B. O.; Eskola, P.; Lusi, A.; Matzuk, A.; Preiser, F. A.; Ostlind, D. A.; Schaeffer, J. M.; Fisher, M. H. J. Med. Chem. 1989, 32, 375. (3) Blizzard, T. A.; Margiatto, G. M.; Mrozik, H.; Shoop, W. L.; Frankshun, R. A.; Fisher, M. H. J. Med. Chem. 1992, 35, 3873.

S0022-3263(97)00187-4 CCC: $14.00

Figure 1. MK-324, 1, and L-694,554, 2.

hydrolyze bis- and tris-MEM substituted intermediates but failed to produce significant yields of mono-MEM 1. A selective silylation and desilylation of ivermectin aglycon was developed to prepare a 5,7-O-bis-protected aglycon intermediate, which allowed the preparation of large quantities of MK-324 and L-694,554. The aglycon of 22,23-dihydroavermectin B1 (3), (see Figure 2, only B1a isomer shown) was prepared by acidcatalyzed solvolysis of ivermectin.4 This hydrolysis was complicated by the susceptibility of the aglycon toward acid catalyzed Grob-like fragmentation to produce ringopened aldehydes.5 Hydrolysis was best accomplished in 5% H2SO4 in methanol at temperatures below 30 °C, producing aglycon 3 in 93% yield. Silylation of aglycon 3 with excess TBDMSCl/imidazole in THF at 55 °C produced monoprotected aglycon 4, exclusively. The addition of excess TMSCl/imidazole to monoprotected 4 trimethylsilylated the remaining C-7 and C-13 hydroxy groups to produce tris-protected aglycon 6 in >95% (4) Chabala, J. C.; Mrozik, H.; Tolman, R. L.; Eskola, P.; Lusi, A.; Peterson, L. H.; Woods, M. F.; Fisher, M. H. J. Med. Chem. 1980, 23, 1134. (5) Blizzard, T. A.; Margiatto, G. M.; Mrozik, H.; Fisher, M. H. J. Org. Chem. 1993, 58, 3201.

© 1997 American Chemical Society

3990 J. Org. Chem., Vol. 62, No. 12, 1997

Figure 2. Ivermectin aglycon intermediates.

yield. The combination of these silylation steps was easily bundled into a one-pot procedure to provide trissilyl-protected 6 in 95% overall yield. The more difficult task of selective removal of either the C-7 or C-13 TMS group was then tackled. A variety of acid, solvent, nucleophile, and temperature parameters were investigated, most of which failed to selectively remove the less sterically hindered C-13 O-TMS group. A selective mono-deprotection of the C-13 hydroxyl group was effected using dichloroacetic acid in 13% aqueous THF at 20 °C, which left the C-7 O-TMS and C-5 O-TBDMS groups intact affording 5-O-TBDMS-7-O-TMS22,23-dihydroavermectin B1 aglycon, 7, in 93% yield. Alkylation of 7 with MEM-Cl and diisopropylethylamine (DIPEA) was achieved in acetonitrile from which the resulting MEM-ether 8 was directly crystallized in 86% yield. The rate of alkylation was found to be highly sensitive to the amount of DIPEA used in the reaction. An excess of base slowed the alkylation rate. It was also found that samples of MEM-Cl that contained HCl due to decomposition led to slower rates of alkylation. In fact, the addition of excess DIPEA‚HCl to reactions induced slower rates of alkylation. A mild removal of the TMS and TBDMS protecting groups in the presence of the MEM group of derivative 8 was accomplished with HCl in methanol at 50 °C. Following the deprotection, MK-324 (1) was crystallized from ethanol/water, producing an ethanol solvate which proved to be unstable to long term storage. Among the multiple degradates isolated were the 22,23-dihydroavermectin B1 aglycon, 3, and a ring-opened aldehyde.4 Single crystal X-ray analysis of the ethanolate revealed that the position of the ethanol in the crystal adjacent to the MEM group predisposed this group to solvolysis within the crystal structure. MK-324 (1) was crystallized from 2-propanol/water to produce a 2-propanol solvate. Single crystal X-ray analysis of this solvate indicated it shared the same positioning within the crystal packing as the ethanolate, but this solvate has proved to be stable to ambient storage. Procedures for the preparation of inverted 13β-avermectin and 13β-O-milbemycin analogues have been published, including (1) solvolysis of C-13β iodo intermediates,3,6 (2) epoxidation, ring opening, and rearrangement of milbemycin,7 microbiological hydroxylation,8

Cvetovich et al.

selenium dioxide allylic oxidation,9 and inversiondisplacement of a tosylate with tetrabutylammonium nitrate.10 While the preparation of the C-13R O-tosyl of ivermectin B1 aglycon with p-toluenesulfonic anhydride, displacement with nitrate, and reductive removal of the nitrate ester with Zn/HOAc (50% yield overall) represented a significant accomplishment in the preparation of C-13β O-derivatives, problems remained that were essential to overcome in order to develop an attractive process for the preparation of L-694,554, 2. Alternate chemistry11 was explored toward the accomplishment of the transformation. When bis-silyl-protected ivermectin aglycon 7 was treated with methanesulfonyl chloride/triethylamine, a complex mixture of products was produced with a low yield of mesylate 9. The use of diisopropylethylamine as base resulted in an increase in the yield of mesylate 9 to 65%, while the use of bases with the pK in the range of 5.5-7, such as pyridine, lutidine, (dimethylamino)pyridine, or collidine, afforded low yields. However, the coaddition of a pyridine base ((dimethylamino)pyridine, collidine, or 2,6-lutidine) with a tertiary alkylamine base resulted in significant enhancement of the mesylate formation. A highly effective procedure for the mesylation of alcohol 7 was developed using methanesulfonyl chloride (2 equiv) in the presence of diisopropylethylamine (3 equiv) and (dimethylamino)pyridine (2 equiv) in dichloromethane at -10 °C, which resulted in the formation of mesylate 9 (Figure 2) in >95% isolated yield. The mesylation is believed to proceed through the intermediacy of pyridinium sulfonyl ions and to not involve formation of sulfenes as the mesylating reagent, with the more basic tertiary amines serving to deprotonate and activate the alcohol (based on NMR studies). The isolation of mesylate 9 required the avoidance of an acidic workup due to the presence of the acid-labile silyloxy protecting groups, and this was accomplished by precipitation of the trialkylammonium and pyridinium salts with hexanes, followed by an aqueous bicarbonate wash. The inversion/displacement of mesylate 9 was explored, utilizing an array of reagents. Tetrabutylammonium nitrate or Amberlyst A-26 nitrate (prepared from amberlyst A-26 chloride) requires long reaction times at 4050 °C in toluene to produce 50-58% yields of nitrate ester 10 (see Figure 3, only B1a isomer shown). Potassium nitrate in DMSO produced mixtures of nitrate ester 10 and nitro derivative 11. Potassium formate, tetrabutylammonium formate, and potassium superoxide/18-crown-6 displacements led to complex mixtures of byproducts, some involving epimerization at C-2, migration of the C-3,4 double bond, and subsequent aromatization due to the base sensitivity of the avermectins.12 Cesium acetate/ 18-crown-6 produced a 50% yield of acetate 12, along with (6) Saito, A.; Naito, M.; Kobayashi, M. Tsuchiya, M.; Toyama, T.; Kaneko, S.; Nanba, T.; Morisawa, Y. J. Antibiot. 1992, 46, 1252. (7) Frei, B.; Huxley, P.; Maienfisch, P.; Mereyala, H. B.; Rist, G.; O’Sullivan, A. C. Helv. Chim. Acta 1990, 73, 1905. (8) Nakagawa, K.; Sato, K.; Tsukamoto, Y.; Okazaki, T.; Torikata, A. J. Antibiot. 1994, 47, 502. (9) Tsukamota, Y.; Sato, K.; Kinoto, T.; Yanai, T. Bull. Chem. Soc. Jpn. 1992, 65, 3300. (10) Jones, T. K.; Mrozik, H.; Fisher, M. H. J. Org. Chem. 1992, 57, 3248. (11) Senanayake, C. H.; Singh, S. B.; Bill, T. J.; DiMichele, L. M.; Liu, J.; Larsen, R. D.; Verhoeven, T. R. Tetrahedron Lett. 1993, 34, 2425.

Syntheses of 22,23-Dihydroavermectin B1 Aglycons

J. Org. Chem., Vol. 62, No. 12, 1997 3991

propionate/propionic acid to produce propionate 13, which was hydrolyzed via Ti(O-i-Pr)4-catalyzed transesterification. Preparation of the O-MOM derivative and selective desilylation successfully yielded L-694,554. Both agents have exhibited antiflea activity on dogs and are being evaluated for their commercial opportunities.

Experimental Section

Figure 3. Inverted C-13 intermediates.

base-derived decomposition (∼25%). Capitalizing on the positive effect of cesium13 and attempting to buffer the basicity of the reagent, we treated cesium acetate with an equimolar amount of acetic acid, which resulted in control of the base-catalyzed decomposition (96 area % by HPLC. HPLC: gradient elution, A:B, tR(min) 13Rmesylate, 9 B1b, B1a 4.47, 5.16; 13β-propionate 13 B1b, B1a 9.78, 10.94; 13β-propionate-7-OH 14 B1b, B1a 4.71, 4.8. 1H NMR: δ 5.87 (dd, J ) 14.8, 11.4, 1H), 5.68 (dt, J ) 11.4, 2.1, 1H), 5.47 (d, J ) 1.6, 1H), 5.45 (om, 1H), 5.35 (dd, J ) 14.8, 10.0, 1H), 5.03 (d, J ) 10.4, 1H), 4.79 (m, 1H), 4.67 (dd, J ) 14.3 2.2, 1H), 4.58 (dd, J ) 14.3, 2.0, 1H), 4.40 (m, 1H), 3.81 (d, J ) 5.2, 1H), 3.63 (m, 1H), 3.23 (q, J ) 2.2, 1H), 3.16 (d, J ) 7.4, 1H), 2.59 (m, 1H), 2.42-2.21 (om, 5H), 1.79 (br s, 3H), 1.74 (om, 1H), 1.63-1.35 (om, 8H), 1.57 (s, 3H), 1.19-1.13 (om, 1H), 1.15 (t, J ) 7.6, 3H), 1.04 (d, J ) 6.6, 3H), 1.01-0.83 (om, 4H), 0.94 (s, 9H), 0.86 (d, J ) 6.8, 3H), 0.80 (m, 3H), 0.144 (s, 3H), 0.140 (s, 3H), 0.13 (s, 9H). 13C NMR: δ 173.7, 170.6, 141.2, 137.0, 135.7, 134.3, 126.2, 124.5, 120.8, 120.3, 97.5, 83.6, 83.4, 80.8, 77.1, 69.4, 69.1, 67.3, 67.1, 47.3, 41.9, 39.8, 36.4, 35.65, 35.57, 34.5, 31.3, 28.1, 27.9, 27.4, 25.9 (3C), 20.0, 19.0, 18.4, 17.5, 12.5, 11.7, 11.1, 9.2, 2.3 (3C), -4.5, -4.7. Anal. Calcd for C46H76O9Si2: C, 66.63; H, 9.24. Found: C, 66.64; H, 9.34. 13β-Hydroxy-5-O-TBDMS-7-O-TMS-22,23-dihydroavermectin B1 Aglycon (15). A solution of propionate 13 (50 g, 0.06 mol) in i-PrOH (0.95 L) and titanium isopropoxide (56 mL, 0.188 mol) was heated at 80 °C for 12 h. The reaction mixture was cooled to 25 °C, diluted with ethyl acetate (2.5 L), and washed successively with 2% aqueous H3PO4 (2 × 2.5 L), 10% aqueous NaCl (1 L), 5% NaHCO3 (2.5 L), and 10% aqueous NaCl (2.5 L). The organic layer was dried over magnesium sulfate (80 g), filtered, and concentrated in vacuo to give 45 g of crystalline 13-epi-OH-7-O-TMS-5-O-TBS-22,23dihydroavermectin aglycon (15) in 95% yield (94.3 wt % assay, HPLC). HPLC: gradient elution, A:B, 90:10 to 100:0 in 30 min, tR(min) 13β-propionate 13 B1b, B1a 10.05, 11.21; 13-epialcohol 15 B1b, B1a 4.87, 5.85.

Syntheses of 22,23-Dihydroavermectin B1 Aglycons Recrystallization. Alcohol 15 (40 g, 94.3 wt % assay), acetonitrile (795 mL), and water (34 mL) were heated to dissolve at 80 °C for 15 min. The mixture was cooled slowly to 70 °C, seeded with crystalline alcohol 15 (250 mg), further cooled to 0 °C over 2 h, and then aged at 0 °C for 24 h. Product was filtered, washed with cold CH3CN:H2O (400 mL, 60:40), and dried in vacuo (25 °C, 24 h), yielding alcohol 15 as a crystalline white solid (30.4 g, 80% yield) with a purity of 99.15 wt % (HPLC assay), mp 192-194 °C. A second crop was obtained by seeding the mother liquors and stirring for 24 h at 0 °C, yielding an additional 6.57 g for a combined recovery of 37.0 g (95% yield). 1H NMR: δ 5.84 (dd, J ) 14.9, 11.5, 1H), 5.65 (dt, J ) 11.5, 2.4, 1H), 5.47 (q, J ) 1.6, 1H), 5.33 (dd, J ) 14.9, 9.9, 1H), 5.29 (om, 1H), 4.79 (m, 1H), 4.68 (dd, J ) 14.3, 2.4, 1H), 4.57 (dd, J ) 14.3, 2.4, 1H), 4.39 (m, 1H), 3.80 (d, J ) 5.2, 1H), 3.77 (d, J ) 9.9, 1H), 3.62 (m, 1H), 3.23 (q, J ) 2.4, 1H), 3.17 (d, J ) 7.5, 1H), 2.43-2.25 (om, 4H), 1.79 (s, 3H), 1.76 (om, 1H), 1.63-1.42 (om, 7H), 1.61 (s, 3H), 1.39 (m, 2H), 1.20-1.12 (om, 1H) 1.17 (d, J ) 6.7, 3H), 0.940.84 (om, 4H), 0.94 (s, 9H), 0.86 (d, J ) 6.7, 3H), 0.68 (m, 3H), 0.140 (s, 3H), 0.137 (s, 3H), 0.12 (s, 9H). 13C NMR: δ 170.7, 140.7, 140.2, 138.2, 134.2, 123.8, 123.7, 121.0, 120.3, 97.5, 83.7, 83.4, 80.8, 77.1, 69.4, 69.1, 67.4, 67.3, 47.3, 41.9, 41.6, 36.3, 35.64, 35.59, 34.5, 31.2, 28.1, 27.4, 25.9 (3C), 20.0, 19.3, 18.4, 17.5, 12.5, 11.7, 10.6, 2.3 (3C), -4.5, -4.7. Anal. Calcd for C43H72O8Si2: C, 66.80; H, 9.39. Found: C, 66.69; H, 9.45. 13β-O-MOM-5-O-TBDMS-7-O-TMS-22,23-Dihydroavermectin B1 Aglycon (16). A solution of chloromethylmethyl ether15 (31.62 mL, 0.419 mol) and dichloromethane (116 mL) was cooled to -10 °C. DIPEA (75.3 mL, 0.433 mol) was added, and the solution was stirred at -10 °C for 45 min. The 13βalcohol 15 (35.9, 0.046 mol) in dichloromethane (116 mL) was added at -10 °C, and the mixture was warmed to 25 °C and stirred for 23 h. The reaction mixture was cooled to -10 °C, 5% aqueous NaHCO3 (0.5 L) was added, and the mixture was stirred for 30 min to destroy excess chloromethyl methyl ether. Ethyl acetate (2 L) was added, the phases were separated, and the aqueous layer was extracted with ethyl acetate (0.5 L). The combined organic layers were washed with 5% aqueous NaCl (0.5 L) and filtered through a silica gel pad (100 g, 230400 mesh), and the eluent was concentrated in vacuo to afford 37.7 g of 13-β-MOM (16) in 98% yield with a purity of >99 area % by HPLC. HPLC: gradient elution, A:B, 90:10 to 100:0 in 30 min, tR(min) alcohol 15 B1b, B1a 5.39, 6.37; 13β-O-MOM 16 B1b, B1a 11.42, 12.84. 1H NMR: δ 5.83 (dd, J ) 14.8, 1.4, 1H), 5.66 (dt, J ) 11.4, 2.0, 1H), 5.46 (q, J ) 1.6, 1H), 5.32 (om, 2H), 4.78 (m, 1H), 4.68 (dd, J ) 14.3, 2.2, 1H), 4.63 (d, J ) 6.7, 1H), 4.56 (dd, J ) 14.3, 2.1, 1H), 4.45 (d, J ) 6.7, 1H), 4.39 (m, 1H), 3.79 (d, J ) 5.2, 1H), 3.68 (d, J ) 10.0, 1H), 3.61

J. Org. Chem., Vol. 62, No. 12, 1997 3993 (m, 1H), 3.38 (s, 3H), 3.22 (q, J ) 2.3, 1H), 3.15 (d, J ) 7.4, 1H), 2.44 (om, 2H), 2.30 (m, 2H), 1.78 (om, 4H), 1.62 (dd, J ) 9.8, 2.2, 1H), 1.56-1.44 (om, 5H), 1.51 (s, 3H), 1.37 (m, 2H), 1.17 (d, J ) 6.5, 3H), 1.16 (om, 1H), 0.99-0.90 (om, 3H), 0.93 (s, 9H), 0.87 (om, 1H), 0.85 (d, J ) 6.8, 3H), 0.78 (m, 3H), 0.14 (s, 3H), 0.13 (s, 3H), 0.12 (s, 9H). 13C NMR: δ 170.7, 140.6, 138.2, 136.6, 134.2, 126.1, 123.8, 121.1, 120.3, 97.5, 92.8, 86.1, 83.4, 80.9, 77.0, 69.4, 69.1, 67.4, 67.2, 55.6, 47.3, 41.9, 40.4, 36.4, 35.63, 35.57, 34.5, 31.2, 28.1, 27.4, 25.9 (3C), 20.0, 19.5, 18.4, 17.5, 12.5, 11.7, 10.8, 2.3 (3C), -4.5, -4.7. 13-β-O-MOM-22,23-Dihydroavermectin B1 Aglycon (2). A solution of 13β-O-MOM 16 (37.6 g, 0.046 mol) in MeOH (0.39 L), at 25 °C, was treated with 0.17 N methanolic HCl (13.4 mL) and stirred for 2.5 h at 25 °C. The reaction mixture was partitioned between 5% aqueous NaHCO3 (0.5 L) and ethyl acetate (2.0 L), the phases were separated, and the aqueous layer was reextracted with ethyl acetate (0.5 L). The combined organic layers were washed with 5% aqueous NaCl (0.5 L) and concentrated in vacuo to afford 29.3 g of L-694,554, 2, as an amorphous solid in 98% yield. HPLC: gradient elution, A:B, 60:40 to 80:20 in 18 min; 2.0 mL/min, tR(min) L-694,554 (2) B1b, B1a 8.15, 9.91. 1H NMR: δ 5.81-5.76 (om, 2H), 5.43 (br s, 1H), 5.40-5.21 (om, 3H), 4.70 (m, 2H), 4.66 (d, J ) 6.7, 1H), 4.44 (d, J ) 6.7, 1H), 4.30 (m, 1H), 3.97 (d, J ) 6.2, 1H), 3.96 (s, 1H), 3.64 (d, J ) 10.0, 1H), 3.61 (om, 1H), 3.38 (s, 3H), 3.28 (q, J ) 2.2, 1H), 3.17 (d, J ) 7.7, 1H), 2.44 (m, 1H), 2.36 (d, J ) 8.1, 1H), 2.33 (m, 2H), 2.02 (m, 1H), 1.88 (s, 3H), 1.72-1.60 (om, 2H), 1.58-1.37 (om, 7H), 1.50 (s, 3H), 1.32 (t, J ) 11.7, 1H), 1.15 (d, J ) 6.5, 3H), 0.96 (t, J ) 7.4, 3H), 0.90-0.84 (om, 1H), 0.86 (d, J ) 6.8, 3H), 0.80 (m, 3H). 13C NMR: δ 173.5, 140.3, 139.0, 137.9, 136.5, 125.8, 123.9, 120.4, 118.3, 97.5, 92.8, 85.8, 80.3, 79.4, 77.3, 68.7, 68.6, 67.7, 67.0, 55.7, 45.7, 41.4, 40.6, 36.7, 35.8, 35.5, 34.5, 31.3, 28.1, 27.5, 20.0, 19.1, 17.5, 12.6, 11.9, 10.7. HRMS: [M + H]+ ) 631.3839 (calculated ) 630.3846).

Acknowledgment. We would like to thank Drs. Karst Hoogsteen and Richard G. Ball for X-ray analyses of the crystalline MK-324 solvates. Supporting Information Available: Copies of 1H NMR and 13C NMR spectra of compounds 1, 2, 6, 7, 8, 9, 13, 15, and 16 (18 pages). This material is contained in libraries on microfiche, immediately follows this article in the microfilm version of this journal, and can be ordered from the ACS; see any current masthead page for ordering information. JO970187L