Subscriber access provided by - Access paid by the | UCSB Libraries
Article
Process for Preparing Value Added Products from Microalgae Using Textile Effluent Through Biorefinery Approach Sourish Bhattacharya, Sumit Kumar Pramanik, Praveen Singh Gehlot, Tejal Gajaria, Himanshu Patel, Sandhya Mishra, and Arvind Kumar ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.7b01961 • Publication Date (Web): 06 Sep 2017 Downloaded from http://pubs.acs.org on September 7, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
1
Process for preparing value added products from microalgae using textile
2
effluent through biorefinery approach
3
Sourish Bhattacharya1,5#, Sumit Kumar Pramanik2#, Praveen Singh Gehlot3,5#,
4
Himanshu Patel1,5, Tejal Gajaria4,5, Sandhya Mishra3*, Arvind Kumar3*
5
1
6
Research Institute, Bhavnagar-364002, Bhavnagar - 364002, India.
7
2
8
Marine Chemicals Research Institute, G. B. Marg, Bhavnagar, Gujarat - 364002,
9
India.
Process Design and Engineering Cell, CSIR- Central Salt and Marine Chemicals
Analytical Division and Centralized Instrument Facility, CSIR-Central Salt and
10
3
11
Research Institute, Bhavnagar-364002, India.
12
4
13
Chemicals Research Institute, Bhavnagar-364002, Bhavnagar - 364002, India.
14
5
Academy of Scientific and Innovative Research (AcSIR), Bhavnagar - 364002, India.
15
#
These authors contributed equally to the work.
16
*Corresponding Authors. Tel: +91-278-2567760. Email:
[email protected] (Dr.
17
Sandhya Mishra);
[email protected] (Dr. Arvind Kumar)
Salt & Marine Chemicals Division, CSIR- Central Salt and Marine Chemicals
Marine Biotechnology and Ecology Division, CSIR- Central Salt and Marine
18
19
20
21
22
23 1 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
24
Abstract
25
A model was designed for effective utilization of textile effluent as the nutrient
26
medium for the production of high-value products from Chlorella variabilis through
27
greener approach. Biomass productivity of 74.96±2.62 g/m2/d with lipid yield of
28
20.1±2.2% (w.r.t. dry biomass) was obtained using textile effluent as the nutrient
29
source. A novel integrated process based on detergent (sodium dodecyl sulphate)
30
based hydrolysis to convert the carbohydrates present in microalgal biomass to
31
reducing sugars for microbial fermentation, while making available lipids for
32
downstream processing of γ- linolenic acid, leaving protein rich fragment behind. Our
33
experimental data showed that from 495 g of microalgal biomass, 109.4 g total lipids
34
was extracted containing 34.65 g γ- linolenic acid, 1.3 g pure ε-polylysine from 36.68
35
g of reducing sugars. A two-step efficient green process was developed for recovering
36
ε-polylysine using ethyl ammonium nitrate having 74 % recovery. In addition to value
37
added products, CSIR-CSMCRI’s Chlorella variabilis (ATCC PTA 12198) can
38
remediate 100% of aluminium, 82.72% boron, 45.66% calcium, 100% cobalt, 14.5%
39
potassium, 0.1% magnesium, 42.18% sodium, 100% nickel and 100% iron. A total
40
decrease of 78.17 % total phosphate and 25.22% total inorganic phosphate with
41
respect to total phosphate present in the effluent was observed.
42
43
44
Keywords: Textile effluent, Chlorella variabilis, unreacted dyes, bicarbonate, γ-
45
linolenic acid.
46
2 ACS Paragon Plus Environment
Page 2 of 36
Page 3 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
47
Introduction
48
Industrialization renders an important functioning in the growth of the country. Textile
49
industry is an important and fast growing industrial sector which is also essential for any
50
growing economy of the country. Any particular textile industry uses various types of raw
51
materials such as cotton, woollen and synthetic fibres.
52
categorized into two, i.e., dry and wet fabric industry. Solid wastes are generated in dry fabric
53
industries, whereas wet fabric industries utilize lot of water generating a lot of waste water
54
containing salts and unreacted dyes1. However, the final disposal of this effluent in solid
55
form (sludge) or liquid form is still a challenge, as even after treatment through conventional
56
techniques, it doesn’t decolorize and detoxify the dye effluents2. However, the textile dyes
57
make water toxic3 and unsafe for human and animal consumption. At the same time, it causes
58
an imbalance within the different aquatic ecosystem and can serve as the mutagenic agent
59
which is harmful to the ecosystem4-7. Simultaneously, the discharge of effluents pollutes
60
rivers, affecting soil properties as well as the growth of plants along with the biodiversity8-10.
61
Various researchers have performed various studies about reduction in dye concentration as
62
well as remediation of salts present in the textile effluent through microalgae. Chia and Musa,
63
2013 was able to reduce concentration of indigo dye present in the textile effluent by growing
64
Scenedesmus quadricanda ABU12 in the textile effluent. Furthermore, removal at a
65
concentration of 17.5% with respect to total dye colour and chemical oxygen demand (COD)
66
level was done utilizing Chlorella vulgaris12. Simultaneously, 73% of the total dye present in
67
textile effluent collected from Karur unit, Tamil Nadu13. Prabina & Kumar, 2013 developed a
68
process for decolorizing the dye present in the textile effluent by growing microalgal
69
consortium in the effluent14. The consortium consists of Anabaena sp., Nostoc sp. and
70
Chlorella sp. which when grown in the effluent, removed 90% of dye.
The textile industries may be
3 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
71
Microalgae such as Chlorella, Scenedesmus and Ankistrodesmus species possess potential to
72
biodegrade organic pollutants present in oil mill wastewater and paper industry wastewater15-
73
19
74
accumulation by physical adsorption, ion exchange and chemisorption, covalent bonding,
75
surface precipitation, redox reactions or crystallization on the cell surface20-27. Microalgae
76
play a key role in nutrient removal through assimilating it as they require high nitrogen and
77
phosphorus for proteins, nucleic acid and phospholipids synthesis inside the cell28-32. Another
78
important application of microalgae is in pollutant removal as certain green microalgae and
79
cyanobacteria can use toxic recalcitrant compounds as carbon, nitrogen, sulphur or
80
phosphorous source for its growth33,34. Chlorococcum vitiosum has the potential to remediate
81
COD at a concentration of 13% along with complete removal of the heavy metals35.
82
In-addition to the reduction of COD and dye concentration in the textile effluent, researchers
83
have succeeded in cultivating microalgae in high rate algal ponds (HRAP). Chlorella vulgaris
84
was cultivated in HRAP (dimensions - 1m x 0.5m x 0.3m; agitation 15 rpm using paddle
85
wheels) using textile effluent containing Supranol Red B3W dye for generation of 106.7 mg/l
86
biomass biomass36. However, it has been reported that live algae as well as non-viable algae
87
(dried algal mats) have been used in the reduction of dyes present in effluent37. The
88
mechanism involves both biosorption and bioconversion. Maurya et al., 2014 reported
89
utilizing non-viable microalgal mat for reducing methylene blue dye. Simultaneously, non-
90
viable Spirogyra biomass can be utilized as an important biosorbent for removal of Synazol
91
dye present in wastewater39,40. Chlorella vulgaris can remove around 69% of the colour
92
through converting mono- azo- dyes such as tectilon yellow 2G to aniline40. Such potentiality
93
of microalgae for removing reactive dyes present in the effluent can be done through
94
manipulating the microalgal growth. In the present study, a model was designed for effective
95
reduction of chemicals as well as residual dyes present in the textile effluent. The chemicals
. Simultaneously microalgae also have the potential to remediate heavy metals through its
4 ACS Paragon Plus Environment
Page 4 of 36
Page 5 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
96
present in the textile effluent are utilized as the nutrient for the growth of Chlorella variabilis,
97
and at the same time, the unreacted dyes reduced through microalgae making the effluent
98
safer for its discharge.
99
One of the major challenges related with the algal biofuel production in a biorefinery
100
approach is improving biomass utilization for net energy gain providing economically viable
101
and scalable process for deriving commercially important co-products through a greener
102
route. Laurens et al., 2015 demonstrated an integrated technology based on moderate
103
temperature and low pH (controlled microwave pretreatment) to convert the carbohydrate in
104
wet algal biomass to soluble sugars for fermentation, while, making lipids more accessible
105
for downstream extraction and leaving a protein-enriched fraction behind41. However, there
106
are several hydrolysis techniques being developed by the researchers for past few decades,
107
but the most common and green process available for hydrolysis of carbohydrates from, e.g.,
108
cellulosic biomass, microalgal biomass is the use of enzymes42. Researchers have developed
109
few low-cost ionic liquids for hydrolysis of lignocellulosic biomass43, its economics about the
110
scalable process is still in question. However, ionic liquids can be used for the extraction and
111
purification of high-value biopolymers from algal source.
112
This work aimed to investigate the potential of carbohydrate containing biomass of Chlorella
113
variabilis grown mixotrophically using textile waste as a substrate for ε-polylysine
114
production along with microalgal lipids containing γ-linolenic acid - a nutraceutical. To the
115
best knowledge of the authors, no published work exists wherein the hydrolysis of Chlorella
116
biomass was performed using sodium dodecyl sulphate (SDS) – a detergent and extraction
117
and purification of ε-polylysine performed using ionic liquid, e.g. ethyl ammonium nitrate.
118
Furthermore, the microalgal biomass was grown using textile effluent along with critical
119
nutrients yielded 74.96±2.62 g/m2/d with total lipid yield of 20.1±2.2%.
5 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 6 of 36
120
Experimental Section
121
Culture maintenance of microalga Chlorella variabilis PTA 12198
122
Oleaginous CSIR - CSMCRI’s Chlorella variabilis (ATCC PTA 12198) was isolated from
123
Diu, India (N 20° 41.341'; E70°53.734') and was maintained as a monoalgal culture in
124
modified Zarrouk’s media44 as per Bhattacharya et al., 201645.
125
Inoculum development
126
The inoculum was initially prepared in 10L carboys (Zarrouk’s medium, 25±5 °C) from a 1L
127
Erlenmeyer flask (Zarrouk’s medium, 700-800 lux, 25±5 °C) in the CSMCRI-P2 medium as
128
per Bhattacharya et al., 2016. The air temperature during daytime was 46±3°C and during the
129
night was 35±3 °C during May’ 2016.
130
Microalgal cultivation
131
CSMCRI’s terrace (21°75.92783’ N; 72°14.41304’ E; Elevation 121 ft.) was chosen as the
132
mass cultivation site. The cultures were agitated manually three times a day.
133
collected from textile industry diluted with tap water in the proportion of 3:7 due to high
134
alkalinity of the effluent. One plastic tank having area 1.1m x 1.1 m with depth 0.085m was
135
used for the cultivation of Chlorella variabilis (ATCC PTA 12198) utilizing textile effluent.
136
The availability of abundant sunlight and prevailing high temperature conditions during the
137
day were the other factors favourable for the selected strain.
138
The Chlorella variabilis was grown in the tank using 40% textile effluent with tap water. The
139
previously described inoculum raising tank was supplemented with CSMCRI-P2 medium
140
consisting of g/l NaHCO3 5; NaNO3 1.2; K2HPO4 0.25; K2SO4 0.25; NaCl 1.0; CaCl2 0.04;
141
Na2EDTA 0.08; MgSO4.7H2O 0.1; FeSO4.7H2O 0.01.
142
Mass cultivation
143
The cultivation was carried out during the peak summer season (June’ 2016) in Gujarat, India
144
with a 46±3°C ambient air temperature. The water temperature range was 43 ± 3ºC during the 6 ACS Paragon Plus Environment
Effluent
Page 7 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
145
entire cultivation. The desired culture for the mass cultivation needed was initially grown in
146
inoculum raising tank with an area of 0.35 m2 each. The mass cultivation tank was monitored
147
regularly by measuring the OD at 540 nm using UV-visible spectrophotometer (Cary Bio 50,
148
Varian Inc., USA) and biomass yield was measured by measuring gravimetrically the dry
149
biomass obtained after centrifugation of the culture of C. variabilis.
150
The open cultivation of Chlorella variabilis (ATCC PTA 12198) was carried out from 13th to
151
18th June’ 2016 having average solar irradiation of 4.8 KWh/m2/d. The air temperature during
152
day time was 46±3°C and during the night was 43±3 °C during June’ 2016.
153
A cell concentration of 2g/L (wet basis) was used to inoculate the tank with an area of 1.2 m2.
154
The biomass yield and total lipid yield were monitored on a regular basis. The agitation of the
155
ponds was done manually three times a day.
156
The textile effluent collected from western overseas, Jetpur, Gujarat. The textile effluent
157
consists of 0.2 g/L inorganic carbon and 4.3 g/L organic carbon in the form of sodium and
158
ammonium bicarbonate having a pH of 12.11±1.2 which was utilized for the growth of
159
Chlorella variabilis. The composition of textile effluent obtained from the textile mill at
160
Jetpur, Rajkot, Gujarat contains (ppm) total dissolved solids 8.13, ammonium ion 5.8, nitrate
161
24.1, salinity 7.7, aluminium 52, boron 1200, cobalt 60, calcium 894, chromium 4, iron 0.5,
162
potassium 2300, magnesium 441, manganese 1, sodium 5368, zinc 1, lead 2 and nickel 16.1.
163
Due to high alkaline concentration, the effluent was mixed with tap water at a proportion of
164
4:6 ratio i.e 40 L of textile effluent is mixed with 60L fresh water, followed by addition of P2
165
medium containing (g/L) K2HPO4 0.25, NaNO3 1.2, K2SO4 0.25, NaCl 1.0, MgSO4.7H2O
166
0.2, EDTA 0.08, CaCl2 0.04, FeSO4 0.01. It addition to components of P2 medium, media
167
also consists aluminium 2.08 g, boron 40 g, cobalt 2.4 g, calcium 2.679 g, iron 0.02 g,
168
potassium 92 g, magnesium 17.64 g, manganese 0.04 g, sodium 214.72 g, zinc 0.04 g, lead
169
0.08 g, Nickel 25.764 g and chromium 0.16 g which came directly from the effluent being 7 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
170
added. Thereafter, 40L of Chlorella variabilis culture added to the medium as an inoculum
171
(Fig. 4a, 4b).
172
Fig. 4a 40% textile effluent media prior to inoculation.
173
174 175
Fig. 4b Cultivation of Chlorella variabilis in open tanks using 40% textile effluent.
176
Lipid estimation
177
The lipid content was quantified gravimetrically from the sun-dried biomass46. The
178
microalgal lipid was extracted three times to obtain clear extracts using 10 ml of Chloroform
179
and Methanol (1:2 v/v) in one gram biomass. The pooled extracts were filtered to remove the
180
cell debris. The filtered extract was evaporated under vacuum to dryness at 55 °C using a 8 ACS Paragon Plus Environment
Page 8 of 36
Page 9 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
181
Büchi rotary evaporator.
182
Fatty acid profiling
183
The Chlorella variabilis methyl esters (CvME) were obtained from the lipid using 1 mL of
184
1% sodium hydroxide in methanol, followed by heating at 55 °C for 15 min. Thereafter, 5%
185
of 2 ml methanolic HCl was added with heating at 55 °C for 15 min47. The prepared FAMEs
186
were then separated by adding 1 ml of hexane to the reaction mixture. The FAMEs
187
containing hexane were analyzed by a GC-2010 gas chromatograph coupled with a mass
188
spectrometer (GC–MS QP-2010, Shimadzu, Japan). The FAMEs were analyzed through a
189
gas chromatography mass spectrometer (GC-2010 twinned with a GC– MS QP-2010) from
190
Shimadzu (Japan). An RTX-5-fused silica capillary column (30 m x 0.25 mm, 0.25 µm)
191
maintained a flow rate of 1 mL/min and a pre-column pressure of 49.7 kPa with Helium as a
192
carrier gas. The column temperature regime was 40 °C for 3 min, followed by an increase at a
193
rate of 5 °C/min up to 230 °C, and then maintained at 230 °C for 40 min. The injection
194
volume and temperature were 1.0 µL and 240 °C, respectively, with a split ratio of 1/30. The
195
mass spectrometer operated in electron compact mode with 70 eV of electron energy. The ion
196
source and the interface temperature were set at 200 °C. The peaks were compared with the
197
standards with respect to their retention times (Standard FAME Mix C4–C24; Sigma Aldrich)
198
by GCMS post-run analysis and quantified by area normalization.
199
Elemental composition of biomass
200
The elemental (C, H, N, S) composition (%) of dried biomass (90O C for 24 h in the oven)
201
was analysed by the CHNS analyzer (elementarvario Micro) and, sulphanilamide was used as
202
a reference standard48. The measured values of the standard had 150 ºC through thermogravimetric analysis (TGA).
C . However, EAN was found to be showing a good thermal stability at a temperature
281
Fig. 2 DSC of synthesized Ethyl ammonium nitrate.
282
283
Moisture analysis
284
The moisture content of the ionic liquid was measured using Karl Fisher (KF) titrator (890
285
titrando, Metrohm-Switzerland). Synthesized EAN was found to be having only 1.27%
286
moisture content.
287
NMR 13 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
288
Chemical Shift (δ) value in ppm, 1.15 (t, 3H), 2.85 (m, 2H), 7.76 (s, broad due to N, 3H).
289
Fig. 3 NMR spectrum of synthesized EAN in DMSO-d6 at 200MHz.
290 291
Downstream processing of ε-PL
292
Ammonium sulphate precipitation
293
In order to precipitate the total protein present in the supernatant after separating the biomass,
294
100 ml of the supernatant was subjected to 40 %, 60 % and 80 % saturated ammonium
295
sulphate solution at 4 oC.
296
Salting out
297
Ammonium sulphate and other salts were removed through dialysis (5 KDa membrane) by
298
using 0.1M tris HCl buffer solution to obtain crude ε-PL.
299
Purification of ε-polylysine using Ethyl ammonium nitrate (EAN)
300
The crude ε-PL extract obtained after ammonium sulphate precipitation was subjected to
301
lyophilization for obtaining the dry powder containing ε-PL. The dried material containing ε-
302
PL was completely dissolved in 10 ml EAN and stirred at 80 rpm for 15 min. at 60 °C to
14 ACS Paragon Plus Environment
Page 14 of 36
Page 15 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
303
dissolve completely 1.35 g ε-PL present in the crude extract and kept immediately at -20 °C
304
for 4 h for precipitation of ε-PL. Finally, the ionic liquid (EAN) was decanted, and the
305
precipitate was dried for obtaining pure ε-PL.
306
Green Metrics
307
With reference to waste utilization for producing value added products, the greenness of the
308
developed process was estimated as per Lukasik et al., 201357. The E-factor can be calculated
309
as
310
E − factor =
311
Material efficiency can be calculated as
312
! " = $%&'()*+,#
#
………….. Equation (1)
………….. Equation (2)
313
314
-'.. *& /+*01().
= -'.. *& /+*01().,-'.. *& 2'.)3.
………….. Equation (3)
315
316
Basically, energy efficiency is having an important impact in all major biochemical processes
317
and the evaluation of new and existing processes. The energy efficiency can be calculated as
318
per below mentioned equation.
319
4!5" ! " =
$63+789:;?@ $63+78AB9=?@
× 100%
………….. Equation (4)
320
15 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
321
Considering non-renewable energy sources for the production of high-value products from
322
microalgae involving the energy required for running equipment and considering energy
323
outputs in products, the energy efficiency can be estimated as,
324
4!5" ! " = G*6%+3632'HI3 363+78
$63+789:;?@
× 100% ………….. Equation (5) AB9=?@
325
Results and Discussions
326
Mass cultivation of C. variabilis using textile effluent in open tanks
327
The textile effluent was used for growing Chlorella variabilis due to the presence of large
328
quantity of inorganic and organic nutrient sources present in it.
329
The biomass productivity of 74.96±2.62 g/m2/d with lipid yield of 20.1±2.2 % (w.r.t. dry
330
biomass) was obtained (Fig. 2). Carbon fixation rate was around 141 g/m2/d. The possible
331
reason may be presence of both organic and inorganic carbon source present in textile
332
effluent used for growth of the Chlorella variabilis. The cultivation was carried out during
333
summer’ 2016, i.e., during the month of June’ 2016 as biomass productivity of Chlorella
334
variabilis is maximum during that period45. Also, during the cultivation, there was an
335
increase in pH from the initial day to final day which indicates an increase in the growth of
336
the biomass may be due to bicarbonate uptake. However, biomass productivity varies with
337
light intensity, nutrient supplementation, etc. Benemann, Goebel, and Weissman (1988)
338
obtained 30 g/m2/d biomass productivity using Chlorella sp. (Chlorophyceae)58-60, whereas,
339
Liang et al., 2013 found 11.2 g/m2/d biomass productivity in open ponds using Chlorella
340
vulgaris61.
341
The lipid productivity was found to be highest on the 6th day (production age 144h). The
342
maximum total lipid yield of 20.1±2.2% (w.r.t. dry biomass) was obtained. The fatty acids
16 ACS Paragon Plus Environment
Page 16 of 36
Page 17 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
343
present in the microalgal oil are 8.2% C17:1, 3.3% C15:0, 32.61% C18:3n6, 12.56% C18:0
344
and 43.4% C16:1.
345
Carbon utilizing percentage by Chlorella variabilis from the culture medium
346
During the initial day of cultivation, i.e., just after the addition of the inoculum, 430g total
347
organic carbon and 20 g total inorganic carbon was present in the media. However, 379.17g
348
total carbon was utilized by Chlorella variabilis after 3 days and 388.935g of total carbon
349
was utilized after 6 days wherein maximum biomass was obtained. In total, 86.43% of total
350
carbon was utilized by the Chlorella variabilis with respect to the total carbon present in the
351
medium (Table 1).
352
Table 1 Carbon utilization percentage by Chlorella variabilis
353 354
Bioremediation in textile effluent
355
Reduction of elements present in textile effluent through its accumulation by Chlorella
356
variabilis was observed. It was observed that using Chlorella variabilis (ATCC PTA 12198),
357
the microalgae can remediate 96% of aluminium, 82.72% boron, 45.66% calcium, 98%
358
cobalt, 14.5% potassium, 0.1% magnesium, 42.18% sodium, 94% nickel and 90% iron
359
present in the textile effluent(Fig. 5). Simultaneously, the decrease of 78.17 % total
360
phosphate and 25.22% total inorganic phosphate was observed in the effluent through 17 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
361
utilizing microalgae Chlorella variabilis (Table 2). However, in most of the reports,
362
bioremediation of textile effluent was carried out using algal consortium or with bacterial
363
isolate62-63, whereas our process deals with unialgal strain. Also, the present study
364
demonstrates a sustainable model for producing value added products along with
365
bioremediation of textile effluent.
366
367
368
Table 2 Phosphate utilization by the microalgae Chlorella variabilis (ATCC PTA 12198) Day
Total phosphate (mg/L)
Inorganic Phosphate (mg/L)
0
11.45±1.2
8.76±0.8
2
10.76±1.4
6.98±1.1
4
9.90±0.8
4.53±0.7
6
8.95±0.13
2.21±1.05
% Reduction
78.17±0.7
25.22±0.9
369
370
371
372 373
Fig. 5 Reduction of elements in the textile effluent through Chlorella variabilis (PTA 12198).
374
Decrease in Dye concentration during cultivation of microalgae
18 ACS Paragon Plus Environment
Page 18 of 36
Page 19 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
375
Fig. 6 illustrates the decrease in concentration of dye present in the textile effluent during the
376
cultivation of microalgae. However, it is also clear just seeing through the naked eye that
377
there is a decrease in the colour from the supernatant collected from the initial day culture
378
and the culture having maximum biomass productivity on the 6th day (Fig. 6).
379 380
Fig. 6 Decrease in dye concentration during cultivation of microalgae
381
Sodium dodecyl sulphate (SDS) mediated hydrolysis of deoiled microalgal biomass
382
The total carbon present in spent microalgal biomass was 8% w.r.t. dry spent biomass. For
383
substituting chemical route for hydrolysis of microalgal biomass to a greener route for
384
obtaining microalgal hydrolysate as carbon and nitrogen source, various concentrations of
385
SDS was used. However, the hydrolysis reaction carried out at ambient temperature for 10h
386
using 5% (w/v) SDS yielded 74.1 mg reducing sugars per gram dry microalgal spent biomass
387
(Table 3). Simultaneously, the saccharification yield was also compared through chemical
388
and enzymatic route. After completion of the hydrolysis of dried spent microalgal biomass
389
(obtained after oil extraction) through chemical and enzymatic route, it was found that 25.22
390
mg reducing sugars were obtained per gram dried spent microalgal biomass through
391
enzymatic hydrolysis and 20 mg of reducing sugars per gram dried spent microalgal biomass
392
were obtained from chemical hydrolysis. The microalgal hydrolysate obtained from SDS
393
mediated hydrolysis was subjected to 100 g/l alumina for complete SDS removal and the
19 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
394
residual hydrolysate was directly subjected to microbial fermentation for production of ε-
395
polylysine.
396
Table 3 Total residual sugars obtained from SDS mediated hydrolysis of microalgae Concentration of SDS (w/v)
Total sugars (mg) per gram of dry biomass of Chlorella variabilis
1
3.68±0.86
3
41.856±2.6
5
74.1±6.86
7
70.8±5.33
10
68.6±6.4
397 398
After complete submerged fermentation having 36 h production age and agitation 220 rpm,
399
fermentation broth was centrifuged to obtain the supernatant containing ε-polylysine at a
400
scale of 1L. The extracellular production of ε-polylysine was found to be 1.76 mg/ml.
401
Overall, 1.76 g ε-polylysine was produced extracellularly in the fermentation broth utilizing
402
34g total reducing sugars having 5.18% carbon utilization efficiency.
403
Extraction and purification of ε-PL using EAN
404
The supernatant obtained after centrifugation was subjected to 40 % ammonium sulphate
405
saturation precipitated 7 % of the total protein present in the supernatant; 60 % ammonium
406
sulphate saturation precipitated 76.48 % of the total protein present in the supernatant; 80 %
407
ammonium sulphate saturation precipitated 38.77 % of the total protein present in the
408
supernatant. Therefore, 60 % ammonium sulphate saturation was considered further for
409
precipitating ε-PL for recovery of maximum ε-PL. The extracellular production of ε-
410
polylysine in fermentation broth was found to be 1.76 mg/mL i.e., 1.76 g of ε-PL was present 20 ACS Paragon Plus Environment
Page 20 of 36
Page 21 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
411
in the fermentation broth containing microalgal hydrolysate. After ammonium sulphate
412
precipitation, 1.35 g of crude ε-PL was obtained. The pure 1.3 g ε-PL was found to be
413
precipitate as a light yellow powder which was recovered by decanting the residual EAN and
414
drying the precipitate at 60 °C to obtain pure ε-PL powder (Fig. 7).
415 416
Fig. 7 Extraction and purification of ε-polylysine using ionic liquid Ethyl ammonium nitrate
417
Characterization of isolated ε-PL using 1H NMR
418
The peaks showing peptide linkage between α-carboxyl group and the ε-amino group,
419
confirming the structure as ε-polylysine as per Bhattacharya et al., 201664.
420
Scale up potential for generation of microalgal biomass by phytoremediation of textile
421
effluent through biorefinery approach.
422
Mass balance analysis of γ- linolenic acid production from Chlorella variabilis was studied.
423
In the current context, textile effluent was supplementing the carbon and nitrogen source for
424
the growth of Chlorella variabilis. From 495 g of microalgal biomass, 109.4 g total lipids can
425
be extracted containing 34.65 g γ- linolenic acid. After lipid extraction, SDS mediated
426
hydrolysis of spent microalgal biomass yielded 36.68 g of reducing sugars and protein rich
427
biomass was left containing 9.65g total proteins. The microbial fermentation using obtained 21 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
428
hydrolysate containing 36.68 g fermentable sugars along with medium components was
429
carried for obtaining 1.3 g pure ε-polylysine (Fig. 8).
430 431
Fig. 8 Mass balance fluxogram showing green process for microalgal biomass as energy
432
feedstock through biorefinery approach.
433
The energy efficiency calculations were done considering all energy inputs during γ-
434
linolenic acid and ε-polylysine production which includes the energy requirement for process
435
equipment, utilities, and fossil energy input. Table 4 shows all the energy inputs including
436
energy accumulated in the product and table 6 shows green metrics value involving E-factor
437
and material efficiency. The analysis of E-factor and material efficiency calculated using the
438
real values are in considerable ranges. The cost of γ- linolenic acid and ε-polylysine
439
production were also analyzed and mentioned in table 5. The revenues from selling the γ-
440
linolenic acid at the cost of 1500 INR per gram and 103 INR per gram along with protein
441
powder and residual algal oil is generating a net gain of 44752 INR. However, the present
442
process is at a demonstration scale, and the energy and cost calculations may vary at pilot
443
scale and manufacturing scale. 22 ACS Paragon Plus Environment
Page 22 of 36
Page 23 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
444
Based on the experimental data, it can be stated that based on material efficiency and
445
economic assessment, the developed process may be feasible and has a good scope for its
446
scalability at 1ton scale utilizing the textile effluent as a nutrient medium for producing γ-
447
linolenic acid and ε-polylysine.
448
Table 4 The economic and energetic inputs used for the green metric calculations Economic evaluation input
Cost
Nutrient salt for microalgal cultivation 250L tank for Cultivation Electricity cost
Rs. 1.3 per Kg Biomass
Total microalgal biomass Manpower cost
495gm
Water cost Water pump (2) Chemicals
Rs. 2250 Rs. 991
Rs. 2500
Energetic evaluation input K-Fertilizer
Nitrate Fertilizer Phosphate Fertilizer HHV microalgae HHV dry Bacillus licheniformis biomass HHV crude reducing sugars
Value
ref
8.036 MJfossil (kg K)−1
65
216.956 MJfossil (kg NO3)−1 6.650 MJfossil (kg P)−1 16.31 MJ/kg
65
23.13 kJ/g
66
16.3 MJ kg−1
67
Rs. 2.4 Rs. 9000 2291.15
449
450
Table 5 The cost and revenues of microalgal γ- linolenic acid and ε-polylysine Cost per batch
INR
Revenue
INR
Depreciation (5 years) Raw materials Utilities Labour and other
409
Microalgal oil
139
2292.5 991 2500
γ- linolenic acid ε-polylysine Protein powder
45000 133.776 5670
451 23 ACS Paragon Plus Environment
65
45
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
452
Table 6 Metrics of microalgal γ- linolenic acid and ε-polylysine evaluated in this work Metric
Real value
E-factor
4.8 х 10-3 a
Material
0.995 10-3 b
efficiency Total energy
123.9 KWH
input γ- linolenic acid
158 INR per
production cost
gram γlinolenic acid
ε-polylysine
1453 INR per
production cost
gram
453
a,b
454
Conclusion
455
One of the major environmental issues with the textile industry sector is the disposal of their
456
effluent containing unreacted dyes and high concentration of salts. Most of the textile
457
effluents consists of a high concentration of bicarbonate salts which is an important substrate
458
for the growth of Chlorella sp. In the present study, Chlorella variabilis was grown in open
459
tanks at a scale of 100L using 40% textile effluent for generating microalgal biomass
460
containing γ- linolenic acid which is an important nutraceutical and generally added into the
461
cooking oils. A total of 495 g microalgal biomass was generated containing 34.65 g γ-
462
linolenic acid. 36.68 g of fermentable sugars was extracted from the deoiled microalgal
463
biomass for preparing 1.3 g ε-polylysine which has various biomedical application in the
464
pharmaceutical sector.
Calculated considering the output of residual nutrients as a waste
24 ACS Paragon Plus Environment
Page 24 of 36
Page 25 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
465
Associated content
466
Supporting Information
467
1
468
signals from the fatty acid, δ 3.24 (single peak from methylic hydrogen of ester), δ 2.36
469
(triplet from methylenic group between olefinic hydrogen); δ 1.89 (triplet from methylenic
470
groups in δ position with respect to carbonylic group); δ 1.65-1.62 (multiplet from
471
methylenic group in both sides of olefinic hydrogen); δ 1.22-1.20 (multiplet from methylenic
472
group on δ position with respect to carbonylic group); δ 0.97-0.86 (signal from methylenic
473
groups in fatty acid chain); and δ 0.48 (triplet from terminal methyl group).
474
H NMR spectrum in chloroform-d, multiplet peaks at δ 5.34.98-4.89 belong to olefinic
13
C NMR spectrum in chloroform-d, δ 174.10, 130.15, 128.07, 51.37, 34.08, 31.57, 29.62,
475
29.39, 29.20, 27.21, 25.65, 24.97, 22.61, 14.07.
476
Obtained microalgal PUFA fraction of Chlorella variabilis after Silver-silica gel column
477
chromatography was found to be γ-linolenic acid after its characterization through 1H NMR
478
and
479
http://pubs.acs.org.
480
AUTHOR INFORMATION
481
*Corresponding Authors
482
Tel/Fax: +91-278-2567760.
483
Email:
[email protected] (Dr. Sandhya Mishra);
484
Email:
[email protected] (Dr. Arvind Kumar).
485
ORCID ID Sandhya Mishra: 0000-0002-2412-4927
486
ORCID ID Arvind Kumar: 0000-0001-9236-532X
487
ORCID ID Praveen Singh Gehlot: 0000-0002-5569-8296
13
C NMR. The Supporting Information is available free of charge via the Internet at
25 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 26 of 36
488
ORCHID ID Sourish Bhattacharya: 0000-0001-7257-1994
489
Notes
490
The authors declare no competing financial interest.
491
Acknowledgements
492
SB and SM would like to acknowledge CSIR for providing financial support through CSC
493
0105 & 0203. SKP acknowledges SERB (PDF/2015/000745) for financial support.
494
authors gratefully acknowledge Dr. Pankaj Pathak, Assistant Professor, Environmental
495
Science and Engineering Department, Marwadi Education Foundation, Rajkot for arranging
496
the textile effluent from Jetpur. PSG would like to acknowledge UGC for SRF. SB
497
acknowledges Kaumeel Chokshi for analyzing the phosphate content in the effluent and in
498
the samples. The authors would like to thank ADCIF, CSIR-CSMCRI, Bhavnagar for the
499
help during the analysis of the effluent and biomass. BDIM is acknowledged for providing
500
PRIS number CSIR-CSMCRI – 152/2016.
501
References
502
(1) Chia, A. M.; Lombardi, A. T.; Melao, M. G. G.; Parrish, C. C., Lipid composition of
503
Chlorella vulgaris (Trebouxiophyceae) as a function of different cadmium and phosphate
504
concentrations,
505
10.1016/j.aquatox.2012.12.004.
506 507
Aquat.
Toxicol.
2013a,
128,
171-182.
The
DOI:
(2) Puvaneswari, N.; Muthukrishnan, J.; Gunasekaran, P., Toxicity Assessment and microbial degradation of Azo dye, Indian J. Exp. Biol. 2006, 44, 618-626.
508
(3) Robinson, T.; Mcmullan, G.; Marchant, R.; Nigam, P., Remediation of dyes in textile
509
effluent: a critical review on current treatment technologies with a proposed alternative,
510
Bioresour. Technol. 2001, 77, 247-255. DOI: 10.1016/S0960-8524(00)00080-8.
26 ACS Paragon Plus Environment
Page 27 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
511 512
ACS Sustainable Chemistry & Engineering
(4) Rocha, A. A., Eds. Algae and the environment: a general approach. SociedadeBrasileira de Ficologia, São Paulo, 1992.
513
(5) Knasmüller, S.; Zöhrer, E.; Kainzbauer, E.; Kienzl, H.; Colbert, B.; Lamprecht, G.;
514
Schulte-Hermann, R., Detection of mutagenic activity in textiles with Salmonella
515
typhimurium, Mutat. Res. 1993, 299, 45-53. DOI: 10.1016/0165-1218(93)90118-W.
516 517 518 519
(6) Jäger, Research Feasibility Study, Hydrotox GmbH, Report to the European Commission, 1998. (7) Mathur, N.; Bhatnagar, P.; Sharma, P., Review of the mutagenicity of textile dye products, Universal J. Environ. Res. Technol. 2012, 2(2), 1-18.
520
(8) Srivastava, S. K.; Kumar, R.; Srivastava, A. K., Effect of textile industry effluents on the
521
biology of river Tons at Mau (U.P.) I Physicochemical characteristics, Poll. Res. 1994,
522
13(4), 369-373.
523
(9) Raj, G. B.; Patnaik, M. C.; Subbaiah, V. V., Heavy metal pollution in soil and fodder
524
(paragrass) irrigated with sewage and effluent water all along Musi River, Proc. Acad.
525
Environ. Biol. 1997, 6(2), 177-182.
526
(10)
Khandelwal, S., Impact of dyeing industries, wastewater on vegetation of Luni
527
catchment area: A case study through remote sensing technique, J. Environ. Poll. 1996,
528
3(2), 77-78.
529
(11)
Chia, M. A.; Musa, R. I., Effect of indigo dye effluent on the growth, biomass
530
production and phenotypic plasticity of Scenedesmus quadricauda (Chlorococcales), An.
531
Acad. Bras. Ciênc. 2014, 86(1), 419-428. DOI: 10.1590/0001-3765201420130225.
532
(12)
El-Kassas, H. Y.; Mohamed, L. A., Bioremediation of the textile waste effluent by
533
Chlorella
vulgaris,
Egypt.
534
10.1016/j.ejar.2014.08.003.
J.
Aquat.
Res.,
2014,
27 ACS Paragon Plus Environment
40(3),
301-308.
DOI:
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
535
(13)
Page 28 of 36
Henciya, S.; Shankar, A. M.; Malliga, P., Decolorization of textile dye effluent by
536
marine cyanobacterium Lyngbya sp. BDU 9001 with coir pith, J. Environ. Sci., 2013,
537
3(6), 1909. DOI: 10.6088/ijes.2013030600013.
538
(14)
Prabina, B. J.; Kumar, K., Toxicity Based Evaluation of Textile Waste Water
539
Treatment Efficiency with Algae on the Growth and Enzyme Activity of the Seedlings of
540
Helianthus
541
10.5829/idosi.ajps.2012.5.4.1128.
542 543 544 545 546 547 548
(15)
annuus,
Abeliovich,
L.
A.;
Acad.
Azov,
Y.,
Plant
Sci.
Toxicity
5
2012,
of
(4),
128-132.
ammonia
to
DOI:
algae
in
sewage oxidation ponds, Appl. Environ. Microbiol. 1976, 31, 801–806. (16)
Narro, M. L., Petroleum toxicity and the oxidation of aromatic hydrocarbons. The
Cyanobacteria. Elsevier, Amsterdam, 1987. (17)
Pinto, G.; Pollio, A.; Previtera, L.; Temussi, F., Biodegradation of phenols by
microalgae, Biotechnol. Lett. 2002, 24, 2047–2051. DOI: 10.1023/A:1021367304315. (18)
Pinto,
G.;
Pollio,
of
low
A.;
549
Removal
550
wastewater using microalgae,
551
10.1023/A:1025667429222.
552
J.
(19)
Tarlan,
E.;
Previtera,
molecular
Dilek,
L.;
weight
Stanzione,
phenols
from
Biotechnol. Lett. 2003,
F.B.;
Yetis,
U.,
M.;
Temussi, oil
mill
25, 1657–1659.
DOI:
Effectiveness
olive
F.,
of
algae
in
the
553
treatment of a wood-based pulp and paper industry wastewater, Bioresour. Technol. 2002,
554
84, 1–5. DOI: 10.1016/S0960-8524(02)00029-9.
555
(20)
Chojnacka, Cd2+
K.;
Chojnacki,
Gorecka,
H.,
Biosorption
of
Spirulina
sp.:
556
Cr3+,
557
kinetics,
558
Chemosphere 2005, 59, 75–84. DOI: 10.1016/j.chemosphere.2004.10.005.
and
Cu2+
A.;
equilibrium
ions and
by the
blue–green
algae
mechanism
of
28 ACS Paragon Plus Environment
the
process,
Page 29 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
559
ACS Sustainable Chemistry & Engineering
(21)
Kaplan,
D.;
Christiaen,
D.;
Arad,
S.M.,
Chelating
properties
of
560
extracellular polysaccharides from Chlorella spp., Appl. Environ. Microbiol. 1987, 53,
561
2953–2956.
562
(22)
Kaplan,
D.;
Heimer,
toxicity
and
Y.
M.;
563
Cadmium
564
129–137. DOI:10.1016/0168-9452(95)04165-Q.
565
(23)
resistance
Abeliovich,
in
Chlorella
Dunn,
567
sulphate
reducing
568
treatment
of
569
1998, 9, 247–257. DOI: 10.1023/A:1008352008353. (24)
sp.,
Goldsbrough, Plant
Sci.
K.
Travieso,
M.;
Duncan, high
acid
L.;
F.;
R.,
rate
mine
Benitez, A.
J.
An
ponding
drainage
Weiland, Experiments
nutrient
removal
wastewaters,
P.;
Sanchez, on
E.;
Dupeyron,
Bioresour. Technol. 1996, 55, 181–186. DOI: 10.1016/0960-8524(95)00196-4.
immobilization wastewater
continuous
576
metal
577
Recycl. 1999, 27, 157–167. DOI: 10.1016/S0921-3449(99)00010-5.
process
for
contaminated
Wilde,
E.
acid
W.;
mine
Benemann,
781–812. DOI: 10.1016/0734-9750(93)90003-6.
582
and
583
different
R. zinc
Q.; in
use
Wang,
of
J.
580
Yu,
the
biological
metals
(27)
by
the
579
581
R.; of
treatments,
Van Hille, R. P.; Boshoff, G. A.; Rose, P. D.; Duncan, J. R., A
575
(26)
the
Biodegradation
573
in
algal
for
microalgae
for
R.,
process
572
578
109,
integrated
Dominguez,
(25)
B.,
1995,
571
574
P.
Rose, P. D.; Boshoff, G. A.; Van Hille, R. P.; Wallace, L. C. M.;
566
570
A.;
microalgae,
W.
freshwater
phosphorus
and
X.,
treatment
water,
R.,
nitrogen
Resourc.
Bioremoval
Biotechnol.
Biokinetics
alga
of
of
ACS Paragon Plus Environment
heavy
1993,
cadmium,
conditions
29
Conserv.
of
Adv.
Scenedesmus
heavy
obliquus and
11,
selenium, under metal
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
584
transfer
585
10.1016/j.envpol.2003.11.013.
586
(28)
to
Laliberte´,
587
technology
588
283–302.
589 590 591
(29)
Daphnia
Oswald,
G.;
magna,
Environ.
Proulx,
in
wastewater
W.
J.,
My
G.;
Pollut.
Pauw,
N.;
treatment,
sixty
years
in
129,
443–456.
DelaNou¨e,
Ergenisse
J.,
Limnol.
applied
1994,
algology,
J.
DOI:
Algal 42,
Appl.
Phycol. 2003, 15, 99–106. (30)
McGriff
Jr.,
C.;
activated
algae,
1155–1164. DOI: 10.1016/0043-1354(72)90015-2. Y.;
by
R.
593
Nurdogan,
organics
McKinney,
nutrients
(31)
and
E.
592
594
2004,
Page 30 of 36
Oswald,
W.
J.,
E.,
Enhanced
The
Water
Res.
nutrient
removal
of
1972,
6,
removal
in
595
high rate ponds, Water. Sci. Technol. 1995, 31, 33–43. DOI: 10.1016/0273-
596
1223(95)00490-E.
597
(32)
Vollenweider,
A.,
598
of
599
Arch. Hydrobiol. 1985, 105, 11–29.
600
(33)
plankton
R.
Elemental
biomass-some
and
comments
biochemical-composition and
explorations,
Semple, K. T.; Cain, R. B.; Schmidt, S., Biodegradation of aromatic compounds by
601
microalgae, FEMS Microbiol. Lett. 1999, 170(2), 291-300. DOI:10.1111/j.1574-
602
6968.1999.tb13386.x.
603 604 605 606
(34)
Subaramaniana G.; Uma, L., Recent Advances in Ecobiological Research, APH
Publishing Corporation, New Delhi, India, 1997. (35)
Chitra, M. J.; Das, A.; Goel M.; Kumar M. R., Microalgae Application for Treatment
of Textile Effluents, J. Pharm. Chem. Biol. Sci. 2013, 4(4), 1602-0606.
30 ACS Paragon Plus Environment
Page 31 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
607
ACS Sustainable Chemistry & Engineering
(36)
Lim, S. L.; Chu, W. L.; Phang, S. M., Use of Chlorella vulgaris for bioremediation of
608
textile
609
10.1016/j.biortech.2010.04.092.
610
(37)
wastewater,
Bioresour.
Technol.
2010,
101(19),
7314-7322.
DOI:
Maurya, R.; Ghosh, T.; Paliwal, C.; Shrivastav, A.; Chokshi, K.; Pancha, I.; Ghosh,
611
A.; Mishra, S., Biosorption of methylene blue by de-oiled algal biomass: equilibrium,
612
kinetics and artificial neural network modelling, PloS one, 2014, 9(10), e109545. DOI:
613
10.1371/journal.pone.0109545.
614
(38)
Khalaf, M. A., Biosorption of reactive dye from textile wastewater by non-viable
615
biomass of Aspergillus niger and Spirogyra sp., Bioresour. Technol. 2008, 99, 6631–
616
6634. DOI: 10.1016/j.biortech.2007.12.010.
617
(39)
Holkar, C. R.; Jadhav, A. J.; Pinjari, D. V.; Mahamuni, N. M.; Pandit, A. B., A critical
618
review on textile wastewater treatments: Possible approaches, J. Environ. Manage. 2016,
619
182, 351-366. DOI: 10.1016/j.jenvman.2016.07.090.
620 621 622
(40)
Acuner, E.; Dilek, F.B., Treatment of tectilon yellow 2G by Chlorella vulgaris, Proc.
Biochem. 2004, 39, 623–631. DOI: 10.1016/S0032-9592(03)00138-9. (41)
Laurens, L. M. L.; Nagle, N.; Davis, R.; Sweeney, N.; Van Wychen, S.; Lowell, A.;
623
Pienkos, P. T., Acid-catalyzed algal biomass pretreatment for integrated lipid and
624
carbohydrate-based biofuels production, Green Chem. 2015, 17(2), 1145-1158. DOI:
625
10.1039/C4GC01612B.
626
(42)
Markou, G.; Angelidaki, I.; Nerantzis, E.; Georgakakis, D., Bioethanol production by
627
carbohydrate-enriched biomass of Arthrospira (Spirulina) platensis, Energies, 2013, 6(8),
628
3937-3950. DOI: 10.3390/en6083937.
629
(43)
Gschwend, F. J.; Brandt, A.; Chambon, C. L.; Tu, W. C.; Weigand, L.; Hallett, J. P.,
630
Pretreatment of lignocellulosic biomass with low-cost ionic liquids, J. Vis. Exp. 2016,
631
114, e54246-e54246. DOI: 10.3791/54246. 31 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
632
(44)
Page 32 of 36
Zarrouk, C., Contribution à l’étude d’une cyanophycée. Influence dedivers’ facteurs
633
physiques et chimiques sur la croissance et la photosynthèse de Spirulina maxima . Ph.D.
634
Thesis, Université de Paris, Paris, 1966.
635
(45)
Bhattacharya, S.; Maurya, R.; Mishra, S. K.; Ghosh, T.; Patidar, S.K.; Paliwal, C.;
636
Chokshi, K.; Pancha, I.; Maiti, S.; Mishra, S., Solar driven mass cultivation and the
637
extraction of lipids from Chlorella variabilis: A case study, Algal Res. 2016, 14, 137-142.
638
DOI: 10.1016/j.algal.2016.01.009.
639 640 641
(46)
Bligh, E. G.; Dyer, W. J., A rapid method of total lipid extraction and purification,
Can. J. Biochem. Phys. 1959, 37(8), 911-917. DOI: 10.1139/o59-099. (47)
Carreau, J. P.; Dubacq, J. P., Adaptation of a macro-scale method to the micro-scale
642
for fatty acid methyl transesterification of biological lipid extracts, J. Chromatogr. A
643
1978, 151(3), 384-390. DOI: 10.1016/S0021-9673(00)88356-9.
644
(48)
Patidar, S. K.; Mitra, M.; George, B.; Soundarya, R.; Mishra, S., Potential of
645
Monoraphidium minutum for carbon sequestration and lipid production in response to
646
varying
647
10.1016/j.biortech.2014.08.070.
648
(49)
growth
mode,
WILEY-VCH,
650
10.1002/9783527613984.
652 653 654 655 656
(50)
Technol.
2014,
172,
32-40.
DOI:
Grasshoff, K.; Kremling, K.; Ehrhard, M., 3rd Eds. Methods of seawater analysis,
649
651
Bioresour.
Verlag
GmbH,
D-69469,
Weinheim,
1983.
DOI:
Miller, G. L., Use of dinitrosalicylic acid reagent for determination of reducing sugar,
Anal. Chem., 1959, 31(3), 426-428. DOI: 10.1021/ac60147a030. (51)
Lowry, O. H.; Rosebrough, N. J.; Farr, A. L.; Randall, R. J., Protein measurement
with the Folin phenol reagent, J. Boil. Chem. 1951, 193(1), 265-275. (52)
Parimi, N. S.; Singh, M.; Kastner, J. R.; Das, K. C.; Forsberg, L. S.; Azadi, P.,
Optimization of protein extraction from Spirulina platensis to generate a potential co-
32 ACS Paragon Plus Environment
Page 33 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Sustainable Chemistry & Engineering
657
product and a biofuel feedstock with reduced nitrogen content, Front. Energy Res. 2015,
658
3, 30. DOI: 10.3389/fenrg.2015.00030.
659
(53)
López, C. V. G.; García, M. D. C. C.; Fernández, F. G. A.; Bustos, C. S.; Chisti, Y.;
660
Sevilla, J. M. F., Protein measurements of microalgal and cyanobacterial biomass,
661
Bioresour. Technol. 2010, 101(19), 7587-7591. DOI: 10.1016/j.biortech.2010.04.077.
662 663 664
(54)
Itzhaki, R. F., Colorimetric method for estimating polylysine and polyarginine, Anal.
Biochem., 1972, 50(2), 569-574. DOI: 10.1016/0003-2697(72)90067-X. (55)
Chiappe, C.; Rajamani, S.; D'Andrea, F., A dramatic effect of the ionic liquid
665
structure in esterification reactions in protic ionic media, Green Chem. 2013, 15(1), 137-
666
143. DOI: 10.1039/C2GC35941C.
667
(56)
Salgado, J.; Teijeira, T.; Parajó, J. J.; Bouzón, S.; Rodríguez, J. R.; Villanueva M.;
668
Varela, L.M., Thermal characterization of ethylammonium nitrate, In Proceedings of the
669
20th Int. Electron. Conf. Synth. Org. Chem., 1–30 November 2016; Sciforum Electronic
670
Conference Series, 2016, 20, f003. DOI: 10.3390/ecsoc-20-f003.
671
(57)
Matos, C. T.; Gouveia, L.; Morais, A. R. C.; Reis, A.; Bogel-Łukasik, R., Green
672
metrics evaluation of isoprene production by microalgae and bacteria, Green Chem, 2013,
673
15(10), 2854-2864. DOI: 10.1039/C3GC40997J.
674
(58)
Benemann, J. R.; Koopman, B.; Weissman, J.; Goebel, R., Algae Biomass Production
675
and
676
10.1016/0302-184X(82)90009-9.
677
(59)
Use.
Elsevier/North-Holland
Biomedical
Press,
Amsterdam,
1980.
DOI:
Weissman, J. C.; Goebel, R.P.; Tillett, D.M., Design and Operation of an Outdoor
678
Microalgae Test Facility, Final Report, Subcontract XK- 1-06 1 1 3- 1, Golden, CO: Solar
679
Energy Research Institute, 1988.
33 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
680
(60)
Page 34 of 36
Weissman, J. C.; Goebel, R.P.; Benemann, J.R., Photobioreactor design: mixing,
681
carbon utilization and oxygen accumulation, Biotechnol. Bioeng. 1988, 31, 336-344.
682
DOI: 10.1002/bit.260310409.
683
(61)
Liang, F.; Wen, X.; Geng, Y.; Ouyang, Z.; Luo, L.; Li, Y., Growth rate and biomass
684
productivity of Chlorella as affected by culture depth and cell density in an open circular
685
photobioreactor,
686
10.4014/jmb.1209.09047.
687
(62)
J.
Microbiol.
Biotechnol.
2013,
23(4),
539-544.
DOI:
Bhattacharya, S.; Dubey, S.; Singh, P.; Shrivastava, A.; Mishra, S., Biodegradable
688
polymeric substances produced by a marine bacterium from a surplus stream of the
689
biodiesel industry, Bioengineering, 2016, 3(4), 34. DOI: 10.3390/bioengineering3040034.
690
(63)
El-Kassas, H. Y.; Mohamed, L. A., Bioremediation of the textile waste effluent by
691
Chlorella
692
10.1016/j.ejar.2014.08.003.
693
(64)
vulgaris.
Egypt
J.
Aquat.
Res.
2014,
40(3),
301-308.
DOI:
Mahmood, R.; Sharif, F.; Ali, S.; Hayyat, M. U., Bioremediation of textile effluent by
694
indigenous bacterial consortia and its effects on Zea mays L. CV C1415. J. Anim. Plant
695
Sci. 2013, 23(4).
696 697 698
(65)
BIOGRACE,
Complete
list
of
standard
values,
version
4
–
Public,
http://www.biograce.net/content/ghgcalculationtools/standardvalues. 27-12-2012. (66)
Cordier, J. L.; Butsch, B. M.; Birou, B.; Von Stockar, U., The relationship between
699
elemental composition and heat of combustion of microbial biomass, Appl Microbiol
700
Biotechnol, 1987, 25(4), 305-312. DOI: 10.1007/BF00252538.
701
(67)
Modarresi, A.; Wukovits, W.; Friedl, A., Exergy analysis of biological hydrogen
702
production,
Comput
Aided
Chem
703
10.1016/j.applthermaleng.2009.04.027
Eng,
2008,
704
34 ACS Paragon Plus Environment
25,
1137-1142.
DOI:
Page 35 of 36
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
705
ACS Sustainable Chemistry & Engineering
TOC Graphic 600 DPI with 9 X 15 cm
706 707
708
709
Synopsis: A sustainable model was designed for effective utilization of textile effluent as
710
a nutrient medium for the production of high-value products from Chlorella variabilis
711
through greener approach.
712 713 714 715 716 717 718 719 720 35 ACS Paragon Plus Environment
ACS Sustainable Chemistry & Engineering
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
For Table of Contents Use Only 34x19mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 36 of 36