Process of Making Sulfuric Anhydrid

having dropped through the hot blast. 15 impacts the crusher surface 4 of the container at the bottom and inasmuch as the structure of the ore in bein...
0 downloads 0 Views 288KB Size
July,

1911

T H E J O U R N A L OF l A Y D U S T R I A L A N D ENGIhrEERING C H E M I S T R Y .

535

produced by igniting the burner 16 in any desired manner, and the containers are set in motion. The ore 29 will be carried up by the partitions 1 2 and 13 and dropped through the blast or flame 15 where they will come into direct contact with the hot blast and have their water of crystallization and volatile products driven off. Any sulphur in the ore will be removed in this manner. The ore having dropped through The hot blast 15 impacts the crusher surface 4 of the container a t the bottom and inasmuch as the structure of the ore in being heated is weakened and made porous, the impact will break and crush the ore, which breaking and crushing is further assisted by the rolling and tumbling of the softer particles in connection with the

practically so, so as to avoid the boiling of the solvent but still allow sufficient heat to assist,the chemical reaction. As soon as a sufficient quantity of ore is deposited in the solution 7 in the container 6 , said container is rolled away and another container substituted. The dissolved ore and solvent from the container 6 which has been rolled away may be emptied after forced percolation by steam or vacuum, or both, and extracting the values thereby into any suitable reservoir where it may be further treated by the usual means to separate the dissolved values if any remain. The inventor is Isaac A Braddock, of Haddonfield, New Jersey, assignor of one-sixth to William C. Cood, of Baltimore

harder particles in the container I during its rotation. The temperature within the container I is usually carried up to about 5ooo F. so as to thoroughly dry the ore and drive off the volatile products. Attention is called to the fact that the removal of the volatile products in the ore while passing through the heat zone causes decrepitation to take place, and the ore becomes porous and spongy so when it contacts the bottom of the container it vi11 be broken and crumbled, the breaking and crumbling action being also assisted by the rolling and tumbling of the ore within the retort during its movements, the heavier and lesser heated ores serving to assist in crushing the softer particles until the ore is reduced to a fine powder. The force of the heated blast serves to cause the crushed particles of the ore to padually work toward the outlet g of the container and as soon :is the ore rocks have been crushed fine enough the heated blast will carry the ore particles through the outlet 9 of the retort I into the second container 6 where the hot ore particles are deposited into the solvent 7. The container 6 being provided with partitions 13 will serve to agitate the solution within the container 6 and as the hot ore particles are directly deposited into said solution the temperature within the container 6 will be maintained a t the desired degree (usually from zooo to Z I Z O F.). The air opening between the containers I and 6 is so regulated that the temperature within the container 6 will be maintained constant or

Maryland, and one-sixth to Sicholas A. Kestler and one-sixth to David E Anthony, of Washington, District of Columbia. 988,646. Process of Making Sulfuric Anhydrid. This invention relates to a process of manufacturing sulfuric anhydrid from iron and copper pyrites, sulfid ores, and mattes resulting from the treatment of such ores. In carrying out the process, sulfur-bearing ores or mattes, preferably fines, on account of their lower commercial value, Fi.3

A

d

e

536

T H E J O U R N A L OF I N D U S T R I A L A N D E N G I N E E R I N G C H E M I S T R Y .

are ground t o a n impalpable powder. This is then fed into a furnace, kiln or shaft, heated to a temperature high enough to ignite the sulfur, preferably being fed by a n air blast or drawn into the furnace by a fan or blower suction. The pulverulent ore is at once ignited, with formation of sulfurous anhydrid and metallic oxids. The finely divided metallic oxids are carried along in the furnace with the mixture of sulfurous anhydrid and air, and being in such a fine state of division, act at once as a catalyzer, converting 3-40 per cent. of the sulfurous anhydrid into sulfuric anhydrid, and a t the same time the gases are purified by the removal of arsenic and the like by their intimate contact with the fine non-volatile oxids. The spent metallic oxids are then separated from the gas. The resulting sulfuric anhydrid is absorbed in strong sulfuric acid in the well-known absorption towers, and the remaining sulfurous anhydrid converted into sulfuric anhydrid by the continuance of the contact process or into hydrated sulfuric acid by the wellknown chamber process. The accompanying illustration shows the apparatus in which the process is carried out. The inventor is Jos. McFetridge, of Vandergrift, Pa.

July, I 9 i I

heat in the column resister being communicated to the main body or mass of molten or other material under treatment by conduction from such resister and chiefly by convection and rapid circulation; and it is a further feature of the invention that the patentee so constructs and proportions the column

I

FA.&.

988,724. Cement Treating Process. This invention is a process for treating Portland cement clinker, by running the intensely heated clinker from a rotary kiln into a receiver and treating the same for the desired time with steam at high pressure generated by spraying water upon the heated material in a closed receiver or otherwise, so that the

.

3

4

___

Y”

b

/.-‘1.9

-

clinker is disintegrated or made firable so as to facilitate grinding and its ageing or hydration to the desired extent is effected, that is, the free or objectionably loosely combined or lime magnesia in the clinker is hydrated or reduced to other forms. The accompanying illustration shows apparatus for carrying out this process. The inventors are Robert W. Lesley, of Haverford, and Henry S. Spackman, of Ardmore, Pennsylvania.

988,936. Electric Furnace Process and Electric Furnace. This invention resides in a n electric furnace wherein the resister comprises a column or columns of molten material, electrodes furnishing communication with the columns, the

resister that the “pinch effect” in such column is availed of for causing more or less violent circulation and movement of the heated material from the columns into the mass of molten material under treatment. The accompanying illustration is a vertical sectional view of an electric furnace in which the resister is in the form of a column or columns of molten material contacting with the electrodes and communicating with the main mass of molten material above it. The inventor is Carl Hering, of Philadelphia, Pa.

988,963. Manufacture of Lead Oxid and White Lead. In the manufacture of white lead from oxid by dissolving the latter in acetate of lead solution, nearly half the lead remains behind as sludge. This is owing to the oxid of lead having been fused in its manufacture, and no matter how finely i t is ground afterward, this fused oxid is in large part insoluble in the acetate of lead solution. It is the purpose df this invention to avoid the fusing of the oxid altogether by making it as a highly soluble massicot at a temperature a long way below the fusing point, and thus the difficulty hitherto experienced in working commercial litharge is avoided. Further, in the manufacture of red lead i t is also very desirable to have the lead oxid in as fine a state of division as possible to avoid the fusing of the oxid, and t o have every particle of the charge at the same degree of oxidation, and especially to avoid powdered lead in the charge, as the lead takes much longer t o oxidize t o red lead than the fused oxid, and the fused oxid much longer than the finely divided unfused oxid. It is thus impossible t o bring all the lead oxid at the same time to the right color, and individual parts are too much oxidized, and others too little. The process is defined in the patent as consisting in subjecting metallic lead to a blast of air and steam, discharging the mixed