Quantification of Mercury Bioavailability for Methylation Using Diffusive

Jun 19, 2018 - Nevertheless, there may have been production and evasion of Hg0 in the .... 2006, 72 (1), 457– 464, DOI: 10.1128/AEM.72.1.457-464.200...
1 downloads 0 Views 965KB Size
Subscriber access provided by UNIVERSITY OF TOLEDO LIBRARIES

Environmental Measurements Methods

Quantification of Mercury Bioavailability for Methylation Using Diffusive Gradient in Thin-Film Samplers Udonna Ndu, Geoff A. Christensen, Nelson A. Rivera, Caitlin M Gionfriddo, Marc A. Deshusses, Dwayne A Elias, and Heileen Hsu-Kim Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.8b00647 • Publication Date (Web): 19 Jun 2018 Downloaded from http://pubs.acs.org on June 21, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 25

Environmental Science & Technology

Quantification of Mercury Bioavailability for Methylation Using Diffusive Gradient in Thin-Film Samplers

Udonna Ndu1, Geoff A. Christensen2, Nelson A. Rivera1, Caitlin M. Gionfriddo2, Marc A. Deshusses1, Dwayne A. Elias2, and Heileen Hsu-Kim1,* 1

Department of Civil and Environmental Engineering, Duke University, Box 90287, Durham, North Carolina, 27708, United States 2

Biosciences Division, Oak Ridge National Laboratory, P.O. Box 2008, MS-6036, Oak Ridge, Tennessee 37831-6036, United States

*Corresponding author: Heileen Hsu-Kim (email: [email protected]; phone: +1-919-660-5109).

ACS Paragon Plus Environment

1

Environmental Science & Technology

1 2

Page 2 of 25

Abstract Mercury (Hg)-contaminated sediment and water contain various Hg species, with a small

3

fraction available for microbial conversion to the bioaccumulative neurotoxin

4

monomethylmercury (MeHg). Quantification of this available Hg pool is needed to prioritize

5

sites for risk management. This study compared the efficacy of diffusive gradient in thin-film

6

(DGT) passive samplers to a thiol-based selective extraction method with glutathione (GSH) and

7

conventional filtration (0.2 µm) of nanocrystalline FeS (0.95 µmol 199Hg per g FeS) (Figure S1), and

92

196

93

Preparation of these stock solutions are described in the Supporting Information (SI).

94

Measurements of 198Hg were used to track Hg(II) and MeHg derived from the ambient or

95

“native” mercury of the original sediment. Dissolved stock solutions of 202Hg(II) and Me202Hg

96

were used as internal standards to correct for method extraction efficiencies for total Hg and

97

MeHg analysis. The measured isotopic compositions of all Hg stocks are shown in Table S1.

98

Each DGT sampler entailed a 25-mm circular plastic housing (DGT Research Ltd,

99

Hg2+, nanoparticulate 200HgS (39 nm average hydrodynamic diameter), 199Hg(II) sorbed to Hg(II) bound to dissolved Suwannee humic acid (5 µmol 196Hg per mg of organic C).

Lancaster, UK) layered with a 0.45 µm nitrocellulose filter, an agarose gel diffusion layer, and a

100

resin binding layer of thiolated silica beads supported on a polyacrylamide gel, as described

101

previously33 and in the SI.

102

Sediment and surface water samples from two different locations were used for laboratory

103

microcosms. The first location was a mesohaline tidal salt marsh near the Rhodes River

104

(Edgewater, Maryland, USA). Sediment (top 15 cm, 172 ± 7 ng g-1 Hg dry weight basis) and

105

surface water were collected on 30th September 2015, were stored at 4 °C, and used for the

106

experiment 1 month after collection. Slurries made from these samples were designated the

107

‘mesohaline’ microcosm for this study. The second site is a small (approximately 8000 m2)

108

retention pond of Sandy Creek (Durham, North Carolina, USA), a freshwater stream located in

109

an urbanized watershed and known to receive moderate amounts of legacy Hg, possibly

110

originating from historical application of turf grass pesticides in upland areas37. The sediments

111

(49.6 ± 6 ng Hg g-1) were collected by hand from the edge of this pond and were used for the

112

“freshwater” slurry microcosms within 2 days of collection on 3rd March 2017.

113

ACS Paragon Plus Environment

5

Environmental Science & Technology

Page 6 of 25

114

Slurry Preparation and Experimental Design. We selected batch anaerobic sediment slurries

115

(instead of more complex laboratory or field experiments) to test our hypothesis. Reasons for this

116

approach were to: 1) Control for a range of Hg bioavailability and methylation potentials; 2)

117

Incorporate multiple replicates across multiple time points (from 0.5 to 7 days) and microbial

118

communities; and 3) Focus on Hg methylation while minimizing confounding factors associated

119

with MeHg degradation.

120

Two sediment slurry microcosm experiments (i.e., the mesohaline and freshwater

121

microcosms) were performed independently. In both cases, the slurries were prepared by placing

122

80 g (wet weight) of sediment and 100 mL of surface water in 0.2 L glass jars. The mesohaline

123

slurries (20 individual jars) were amended with 5 µM sodium pyruvate and the freshwater

124

slurries (15 jars) were amended with 1 mM sodium pyruvate as a means to stimulate the

125

methylating microbial community in these slurries. The slurries were sealed with gas-tight screw

126

caps and incubated at room temperature in the dark for 4 days. An additional replicate slurry

127

with a resazurin indicator (0.001%) changed from dark pink to colorless over this time,

128

indicating the development of anoxic conditions in the jars. After this pre-incubation period, all

129

further manipulations of the slurry were performed in an anaerobic chamber with a 3% H2/97%

130

N2 atmosphere (Coy Labs).

131

Each anaerobic jar was amended with four forms of inorganic Hg (i.e., “endmembers”):

132

dissolved 204Hg2+, 196Hg(II)-humic acid, nanoparticulate 200HgS, and 199Hg(II) sorbed to FeS. The

133

target Hg content for each endmember was within the range of 50-200 ng g-1 d.w. (The amount

134

of each isotope spike was verified later by analysis of total Hg content in the slurry). The jars

135

were shaken end-over-end for a few seconds between each Hg addition. After all Hg spike

136

addtions, a DGT sampler was added to each jar, and the jars were stored under static conditions

137

in the dark (to avoid photodegradation of MeHg). During this incubation, the jars were mixed

138

end-over-end once per day. Replicate jars (n = 3 or 4) were sacrificed periodically from < 0.5 d

139

and up to 7 d after Hg isotope addition.

140

We note that results between the mesohaline and freshwater slurry experiments were not

141

designed to be similar to each other (e.g., they utilized sediment-water from different sites and

142

were stimulated to different extents with organic carbon). Rather, we view these slurries as

143

distinct microbial community mixtures and geochemical compositions for us to test our

ACS Paragon Plus Environment

6

Page 7 of 25

Environmental Science & Technology

144

hypothesis regarding the efficacy of DGTs as indicators for Hg bioavailability and methylation

145

potential.

146 147

Microcosm Sampling. At the designated incubation time point, each jar was mixed end-over-end

148

and held static for 10 minutes to allow for large particles to settle prior to subsampling in the

149

anaerobic chamber. Porewater was collected by filtering 15 mL of the overlying water through a

150

0.2 µm polyethersulfone filter (VWR). This filtered sample was apportioned into samples

151

designated for total Hg analysis, major cations including Fe, sulfate and dissolved organic carbon

152

(DOC) analyses.

153

The whole slurry was then mixed end-over-end again and aliquots of the unfiltered slurry

154

were immediately collected and frozen for later analysis of MeHg, total Hg contents, the GSH-

155

extractable Hg fraction, dry-wet mass ratio, microbial community composition, and abundance

156

of methylating microorganisms. The pH values of the slurries were measured at the time of

157

sampling.

158 159

Chemical Analyses. Procedures for all chemical analyses are described in the SI. Isotopic-

160

specific MeHg and Hg contents were quantified by cold vapor inductively coupled plasma mass

161

spectrometry (ICP-MS). Other cations were determined by conventional ICP-MS. Dry-wet mass

162

ratio was determined by the gravimetric mass of a whole slurry sample before and after heating

163

in an oven overnight at 105 oC.

164

The glutathione (GSH)-extractable fraction of Hg(II) for each sample was determined as

165

described previously.17 In brief, 1 mL of whole slurry (corresponding to 0.13 gdw sediment) was

166

added to 10 mL of deionized water spiked with dissolved GSH to a final concentration of 1 mM

167

and mixed end-over-end for 1 h. The supernatant was then collected and subjected to

168

centrifugation (