Quantitative Characterization of Aqueous Byproducts from

Jan 9, 2017 - Organic acids (acetic acid), oxygenates (ethanol, acetone, butanone, and alkyl derivatives of 2-cyclopenten-1-one), and anhydrous sugars...
0 downloads 15 Views 1MB Size
Subscriber access provided by UNIV OF CALIFORNIA SAN DIEGO LIBRARIES

Article

Quantitative Characterization of Aqueous Byproducts from Hydrothermal Liquefaction of Municipal Wastes, Food Industry Wastes, and Biomass Grown on Waste Balakrishna Maddi, Ellen A. Panisko, Thomas Wietsma, Teresa Lemmon, Marie Swita, Karl Albrecht, and Daniel Trusler Howe ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.6b02367 • Publication Date (Web): 09 Jan 2017 Downloaded from http://pubs.acs.org on January 14, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

3

Quantitative Characterization of Aqueous Byproducts from Hydrothermal Liquefaction of Municipal Wastes, Food Industry Wastes, and Biomass Grown on Waste

4 5

Balakrishna Maddi,a* Ellen Panisko,a Thomas Wietsma,a Teresa Lemmon,a Marie Swita,a Karl Albrecht,a and Daniel Howea

1 2

6

a

Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352, USA

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

*Corresponding author

24

Post Doctorate Research Associate

25

Pacific Northwest National Laboratory, P.O. Box 99352, Richland, WA 99352, USA

26

e-mail: [email protected]

27

Phone: 1-509-375-6491

28

Fax: 1-509-372-1861

Balakrishna Maddi

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

29 30

Highlights •

31

The total carbon yield in the aqueous fraction from hydrothermal liquefaction (HTL) of municipal/food industry waste was 20 to 55 wt%.

32



40 to 70% of the total carbon in the aqueous fraction was identified and quantified.

33



50 to 90% of the total nitrogen in aqueous byproducts produced from HTL of municipal

34 35

waste and algae grown on municipal waste is ammonia. •

36 37

The aqueous stream generated from HTL of grape pomace primarily consists of ethanol, acetone, acetic acid and 2-butanone.



High-value organic species (such as acetone, acetic acid, ethanol, N-methylsuccinimide,

38

etc.), alkaline salts, sulfur, and phosphorous should be utilized/recycled from these

39

aqueous streams for the overall sustainability of a biorefinery.

40

ACS Paragon Plus Environment

Page 2 of 42

Page 3 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Abstract

41 42

Hydrothermal liquefaction (HTL) is a viable thermochemical process for converting wet

43

solid wastes into biocrude which can be hydroprocessed to liquid transportation fuel blendstocks

44

and specialty chemicals. The aqueous byproduct from HTL contains significant amounts (20 to

45

50%) of the biogenic feed carbon, which must be valorized to enhance economic sustainability

46

of the process on an industrial scale. In this study, aqueous fractions produced from HTL of food

47

industry wastes, municipal wastes and biomass cultivated on wastewater were characterized

48

using a wide variety of analytical approaches. Organic species present in these aqueous fractions

49

were identified using two-dimensional gas chromatography equipped with time-of-flight mass

50

spectrometry. Identified compounds include organic acids, nitrogen compounds, alcohols,

51

aldehydes, and ketones. Conventional gas chromatography coupled with flame ionization

52

detection and liquid chromatography utilizing refractive index detection were employed to

53

quantify the identified compounds. Inorganic species in the aqueous streams were also were

54

quantified using ion chromatography and inductively coupled plasma optical emission

55

spectroscopy. The concentrations of organic compounds and inorganic species are reported, and

56

the significance of these results are discussed in detail.

57 58

Keywords: Municipal waste, Hydrothermal liquefaction, Food industry waste, Aqueous

59

byproduct, Biorefinery, Biofuels, Biocrude.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

60

1.

Introduction

61

Based on a recent survey of fossil energy resources, energy security and independence are

62

challenges encountered by the United States as well as developing countries 1-3. Therefore, there

63

is an incentive to explore renewable energy resources that have potential for use in producing

64

liquid transportation fuels (especially jet fuel and diesel) and/or fuel additives. Conventional

65

biomass, which includes lignocellulosic and aquatic feedstocks, has the potential to produce

66

liquid transportation fuels via biochemical and thermochemical conversion processes 4.

67

According to several techno-economic studies, lignocellulosic biomass can only satisfy 30% of

68

today’s energy demand. For large-scale production of liquid transportation fuels, several

69

scientific, technical, economical and logistical challenges must be overcome before aquatic

70

biomass is viable 5. Therefore, attention has shifted to the estimated 18 billion metric tons of

71

carbon 6 that is discarded across the globe annually for liquid fuel blendstocks production. Wet

72

solid wastes generated at municipal wastewater treatment plants and food processing industry

73

have attracted significant interest for biofuel production 7. These wet solid wastes are generated

74

continuously from existing infrastructures/industries and have the potential to produce liquid

75

transportation fuels at the industrial scale via either biochemical or thermochemical pathways.

76

Wet solid waste generated from municipal wastewater plants consist of 80 to 97 % moisture

77

depending on dewatering techniques or sludge generation operations employed 8-9. At present,

78

wet municipal sludge has been utilized to generate methane or hydrogen via anaerobic digestion

79

10-11

80

cultivating agricultural crops and aquatic species such as algae, bacteria, fungi, and yeast 12-16.

81

This sludge residue also can be applied as a landfill cover material 11, 17. Similarly, wet solid

82

waste generated from food processing industries also has been anaerobically digested to produce

. The remaining residue from this process has been employed as a nutrient source for

ACS Paragon Plus Environment

Page 4 of 42

Page 5 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

83

methane/hydrogen, and the residue produced has been used to fertilize agricultural crops or as a

84

material cover to landfills 18-20. Municipal solid wastes contain heavy metals and toxic chemicals

85

that might be harmful to the environment 12; therefore, their application as fertilizer and landfill

86

cover material is regulated under environmental laws 11-12, 21-22. As an alternative to the

87

conventional anaerobic digestion approach, wet solid wastes from food industry and municipal

88

wastewater treatment plants are also being thermally processed to produce electricity, process

89

heat or syngas 23-25.

90

Hydrothermal liquefaction (HTL) is a thermochemical process that uses water naturally

91

associated with wet feedstocks such as aquatic feedstocks, or with additional water in the case of

92

lignocellulosic feedstocks, to produce an intermediate biocrude material as the first step in the

93

production of liquid transportation fuels 25-29.Wet wastes have a natural advantage over

94

lignocellulosics for HTL because they do not require drying, grinding, and rehydration to make a

95

pumpable slurry, reducing the overall feedstock preprocessing and preparation steps. The

96

products from HTL include an organic biocrude fraction, an aqueous stream, a solid residue, and

97

a small fraction of gaseous product 27. The bio-crude product is readily converted into liquid

98

transportation fuels via a single temperature catalytic hydroprocessing step with subsequent

99

fractionation/distillation 30-31.

100

The HTL of biomass is an active area of research so there are no definitive process

101

conditions. A recent study that collected data from over 30 previously published HTL

102

experiments revealed that biocrude yields ranged from 0% to 85%, with the mean at 26% oil32.

103

Consequently, the organic yield to the aqueous phase also demonstrated a similar phenomenon.

104

The minimum water soluble organic was 2%, the maximum was 75% and the mean was 28%.

105

The statistical analysis performed revealed that the increase in concentration of organics to the

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

106

aqueous phase correlated with long reaction times, fast heating rates, high concentrations of

107

catalysts, high lipid and lignin feedstocks, and low carbon/hydrogen ratio feedstocks32.

108

Techno-economic analysis of liquid fuel production utilizing HTL with woody biomass

109

determined that the waste disposal costs associated with the aqueous phase was second only to

110

feedstock costs 30. Utilizing organic as well as inorganic species in the aqueous phase is one

111

pathway to reduce operating costs of a biomass HTL to fuel facility. Since this aqueous stream

112

from biomass HTL (lignocellulosic and algal feedstocks) contains biogenic carbon 33-34, nitrogen,

113

phosphorous and micronutrients, it can be used to cultivate algal/aquatic feedstocks 35-36.

114

Aqueous byproducts from biomass HTL can also be utilized to produce 48.5 – 63.4 MJ/m3 fuel

115

gas via anaerobic digestion or catalytic hydrothermal gasification or catalytic reforming37-38.

116

High-value specialty chemicals (such as ethanol, acetic acid, acetone and N-methylsuccinimide)

117

derived via liquid-liquid extraction followed by catalytic processes 39-40 may also be viable.

118

Alternatively, the aqueous fraction can be sent to water treatment plant for discharge into natural

119

water bodies provided that the constituents are within permitted ranges41. For effective

120

downstream conversion or conditioning of the aqueous stream generated from HTL of wet solid

121

wastes, qualitative and quantitative data of constituent organic and inorganic species are

122

required. Limited information is available in the literature about the chemical composition of the

123

aqueous phase generated from the HTL of food industry waste, municipal wastewater treatment

124

plant solids or aquatic biomass grown on wastewater streams41. In this article, a wide-variety of

125

analytical techniques is employed to qualitatively and quantitatively characterize the organic and

126

inorganic constituents present in these aqueous streams.

127

2.

Materials and methods

128

2.1

Feedstocks

ACS Paragon Plus Environment

Page 6 of 42

Page 7 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

129

Wastes used in this study were obtained from food processing and municipal wastewater

130

treatment plants. Food industry wastes (FIW) 1 and 2 were Montepulciano grape pomace

131

(collected from Sleeping Dog Wines, Benton City, WA) and Cabernet Sauvignon grape pomace

132

(obtained from Columbia Crest Winery, Paterson, WA), respectively. FIW3 was sugar beet

133

tailings (from industrial collaborator, Fargo, ND), and FIW4 was the extracted grain procured

134

from Ice Harbor Brewing Company (Kennewick, WA). Primary, secondary, and digested sludge

135

were provided by Metro Vancouver (Canada). Two biomass feedstocks, oleaginous yeast

136

(PNNL, Richland, WA) grown on corn stover lignin residue (NREL, Denver, CO) and a mixed

137

algae culture grown on municipal wastewater (produced by the full-scale algae raceway

138

wastewater treatment facility in Delhi, CA) were utilized.

139

2.2

140

Hydrothermal liquefaction of municipal and industrial waste HTL was performed on the wastes described above at 350°C and 3000 psi using a

141

continuous-flow, bench-scale system. Process flow diagram of HTL continuous-flow, bench-

142

scale system is shown in supplementary information, Figure S1. Table 1 shows the processing

143

conditions used to generate aqueous streams that were analyzed in this study. Ultimate analysis

144

of the feedstocks processed using HTL is shown in Table S1. Calculation of the percentage

145

feedstock carbon reporting to the aqueous phase is simply the measured concentration of C in the

146

aqueous phase times the total volume generated divided by the total measured C in the feedstock.

147

Detailed information on HTL experiments and calculations for percent carbon of feedstock

148

present in aqueous phase and high heating value (HHV) of bio-crude for municipal wastes is

149

presented elsewhere 42-43. Similarly, HTL experiments on grape pomace are presented elsewhere

150

44

.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

151

2.3

152

Total carbon, inorganic carbon, total nitrogen, cation and anion analysis Total carbon, total nitrogen and inorganic carbon content of these HTL aqueous streams were

153

determined using a Shimadzu (Columbia, MD) TOC-5000A TC analyzer equipped with a

154

Shimadzu ASI-5000A auto-sampler and a non-dispersive infrared detector. Cation analysis was

155

performed on a Perkin Elmer (Waltham, MA) Optima 7300DV inductively coupled plasma

156

optical emission spectrometer with a Meinhard nebulizer, glass cylonic spray chamber and 2.0

157

mm alumina injector. Anion content was estimated using a Dionex-3000 (Sunnyvale, CA) Liquid

158

Chromatography system equipped with a conductivity detector and a Dionex IonPac AS 11

159

hydrocracking column. Data acquisition methods used for estimating total carbon, total nitrogen,

160

inorganic carbon, and the cation and anion contents of aqueous byproducts from HTL of waste

161

feedstocks have been described previously in the literature 33-34. Chemical oxygen demand and

162

ammonia content were determined using an HACH (Loveland, CO) reagent-kit and

163

spectrophotometry.

164

2.4

165

of-flight mass spectrometry (GC × GC – TOF – MS )

Qualitative characterization using two-dimensional gas chromatography with time-

166

All aqueous byproducts from HTL of wastes were characterized using a LECO (St. Joseph,

167

MI) Pegasus 4DTM instrument. The data acquisition method has been described extensively in the

168

literature 33, 45. For each sample, 0.5 µL was injected into the gas chromatograph. The GC

169

injector temperature was maintained at 260°C. A split ratio of 1:150 was used in this analysis.

170

The temperature program for the GC primary column was as follows: constant temperature of

171

40°C for 0.2 min followed by a temperature ramp to 250°C at 5°C min-1 and finally holding at a

172

constant temperature of 260°C for 5 min. An optimum modulation period of 6 s was used with

173

1.2 s of hot pulse and 1.8 s of cold pulse. The temperature of the modulator was maintained 5°C

ACS Paragon Plus Environment

Page 8 of 42

Page 9 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

174

higher than the secondary column while the temperature of the GC secondary column was

175

maintained 5°C higher than the primary column. The transfer line connecting the GC × GC and

176

the TOF/MS was maintained at 260°C. The MS ion source was maintained at 225°C. An

177

acquisition rate of 200 spectra sec-1 was used for the MS detector. Data processing was

178

performed using ChromaTOF version 4.50. Chemical compounds were identified using the

179

NIST2008 mass spectral database.

180

2.5

Quantitative gas chromatography and liquid chromatography analysis

181

Organic compounds in aqueous co-products from HTL of municipal waste, food industry

182

waste, and biomass feedstocks grown on wastes identified using GC × GC – TOF – MS were

183

quantified using one-dimensional gas chromatography. An Agilent (Santa Clara, CA) 7890 GC

184

equipped flame ionization detection (FID) and fused silica capillary column with a stationary

185

phase of 5%-phenyl-methylpolysiloxane (Agilent HP-5 column; 30 m × 0.25 mm × 0.25 µm)

186

was used for quantification analysis. Prepared or purchased standards were used for quantitative

187

characterization. A custom commercial calibration mixture was purchased from Restek

188

Corporation containing acetone, 2-butanone, cyclopenatanone, 2-cyclopenten-1-one, 2-

189

pyrrolidinone, and N-methylpyrrolidone at 1.0% (weight/weight) in water. Other standards

190

contained ethanol, pyrazine, acetamide, N-methylsuccinimide, 3-pyrindol, phenol, and N-

191

ethylsuccinimide, each at 1.0 wt% in water. Sample preparation, standard calibration ranges, and

192

the GC data acquisition method were described previously in the literature 33-34. Each standard

193

solution was diluted with water gravimetrically to produce eight-point calibration ranges from

194

approximately 0.005%–1.0% (weight/weight). Four replicates of all HTL aqueous samples and

195

each standard mixture at every calibration level were prepared for GC/MS, GC/flame ionization

196

detection (FID) and liquid chromatography analysis and were analyzed in a blocked randomized

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

197

experimental design to control for instrument performance. This procedure was recommended by

198

NIST (Chapter 2, Section 2.3.6.2 Data Collection)46. Calibration and testing are coupled in one

199

design to maintain statistical balance, avoid confounding of treatment effects estimates, improve

200

the estimation of variance components, and simplify the statistical analysis.

201

An Agilent (Santa Clara, CA) 1100 Liquid Chromatography system equipped with a

202

refractive index (RI) detector was used to quantify the organic acids present in the aqueous

203

samples. An Aminex HPX-87H (7.8 × 300 mm2) ion exclusion column equipped with a guard

204

column (4.6 × 30 mm2) was used for this analysis. A custom commercial calibration mixture

205

containing acetic acid, propanoic acid, and butanoic acid at 1.0% (weight/weight) in water was

206

purchased from Restek Corporation. Sample preparation, standards calibration range and liquid

207

chromatography data acquisition method were described previously in the literature 33-34. The R2

208

value from the linear regression of calibrations utilized to generate data reported in this

209

publication was >0.98.

210

3.

211

Results and discussion Although the HTL process itself is not the main focus of this paper, differences in the

212

processing conditions and results can help elucidate the quantity and nature of the aqueous

213

byproduct. The differences in the solids loading for the feeds reported in Table 1 were due to the

214

necessity of producing a pumpable slurry that is not prone to dewatering effects. Hence the wt%

215

of solids in the slurry varies from 8.1 to 14.9%. The mass-basis yield of biogenic carbon which

216

reports to the aqueous fractions generated from HTL of municipal waste, food industry wastes,

217

and biomass grown on municipal/food wastes is in the 20 to 55 wt% range. The broad interval of

218

20 to 55 wt% of feed carbon in the aqueous phase is a significant challenge for the overall

ACS Paragon Plus Environment

Page 10 of 42

Page 11 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

219

sustainability of industrial processes if the entire stream is considered as waste30. The disparity of

220

the biogenic carbon in the aqueous stream could be due to either the operating conditions of the

221

HTL process (such as solid loading, space velocity) or the type of waste/biomass feedstock. The

222

two species of grape pomace provide a striking example, where one strain, FIW01 has a 1.5 fold

223

greater aqueous carbon yield than the FIW02 strain (the aqueous carbon yield values shown in

224

Table 1). While it has been determined for HTL of algae that increased solids loading assist in

225

retaining carbon in the oil phase27, there is also evidence that chemical compositions of grape

226

pomace can differ by cultivation47. Three varieties of red wine grapes with seedless pomaces

227

have oil contents that range from 3 to 6%, monosaccharides from 21 to 31% and tannins from 26

228

to 36%. Pomace containing grape seeds have been reported to have oil up to 14%48. Higher lipid

229

content in algal feedstocks resulted in increased bio-crude yields in comparison to those strains

230

that had high carbohydrate composition 27. Similarly, compositional analysis of waste water

231

sludge may indicate why the secondary sludge sample had the highest amount of carbon in the

232

aqueous phase. The secondary sludge at 50% protein was more than twice that of the primary

233

sludge (21%), and nearly twice the digested sample (28%). This feedstock was also the only

234

sample that experienced issues in separating the bio-crude from the aqueous phase. In addition to

235

examining process conditions to increase bio-crude yield, strategies to utilize products

236

partitioned into the aqueous phase will improve economics and carbon yields for HTL processes.

237

Aqueous phases generated from HTL of FIW03, oleaginous yeast grown on corn stover

238

lignin residue, and FIW04 are slightly acidic (4 to 6 pH). The acidic nature of these aqueous

239

streams is likely the result of the presence of organic acids formed from degradation of either

240

monomeric sugars or carbohydrates present in the feed during HTL. Aqueous byproducts

241

generated from HTL of municipal waste, FIW01, FIW02, and algae grown on municipal waste

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

242

are mildly basic (pH of 6 to 8). The alkaline nature of these aqueous streams likely result from

243

the high concentration of nitrogenous compounds that are formed during degradation of

244

constituent proteins in the waste feedstocks 49.

245

As reported previously33-34, the aqueous byproduct from HTL has a very high COD that

246

will necessitate either onsite wastewater treatment facilities or further processing to valorize the

247

carbon present. The COD of the streams shown in Table 1 range from 41 to 110 g/L, compared

248

to 0.2 to 1.2 g/L50 for raw municipal wastewater. For different HTL feedstocks, this compares to

249

ranges of 41 to77 g/L for lignocellulosic feedstocks34, and 44 to 85 for algal feedstocks33.

250

GC × GC – TOF – MS was used to identify compounds present in aqueous byproducts

251

generated from HTL of municipal waste, food industry wastes and biomass grown on

252

municipal/food waste. Three-dimensional (3D) plots of the total ion chromatogram obtained for

253

the HTL aqueous byproducts of FIW02 and FIW03 are shown in the Figure 1 and Figure 2,

254

respectively (3D plots of aqueous byproduct from HTL of Montepulciano grape pomace and

255

extracted grain from beer brewing are shown in supplementary data, Figure S2 and Figure S3.)

256

Organic acids (acetic acid), oxygenates (ethanol, acetone, butanone, and alkyl derivatives of 2-

257

cyclopenten-1-one) and anhydrous sugars (such as isosorbide) are observed in the aqueous

258

fraction generated from HTL of food industry wastes, (shown in Table S2, S3, S4 and S5).

259

Organic acids, oxygenates, and anhydrous sugars could be formed from degradation of

260

carbohydrates present in these waste materials during HTL. In addition to organic acids and

261

oxygenates, aqueous streams generated from HTL of municipal wastes and algae grown on

262

municipal wastes (shown in Figure 3 and Figure 4 and Figure S4 and S5) contain nitrogenous

263

compounds (pyrazine, 2-pyrrolidinone, 2-piperdine, N-methyl succinimide, and 3-pyrindol).

264

These nitrogenous compounds are likely produced from the degradation of proteins present in

ACS Paragon Plus Environment

Page 12 of 42

Page 13 of 42

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

265

the feedstocks during HTL. These compounds i.e. organic acids, oxygenates and nitrogenous

266

compounds were observed previously in the aqueous co-product produced from HTL of algae

267

cultures grown on municipal wastes 16. Dissolved carbon dioxide and/or carbon dioxide-

268

ammonia salts such as ammonium carbamate also were observed in HTL aqueous streams from

269

municipal waste and algae cultivated on municipal waste. These carbon dioxide-ammonia salts

270

also were observed in the aqueous byproducts generated from HTL of algal feedstocks not grown

271

on municipal wastewater 33. Organic compounds present in the aqueous streams generated from

272

HTL of municipal wastes and algae grown on municipal waste were similar to those obtained

273

from algal biomass 33. Therefore, wet municipal wastes and algal cultures may be co-fed to HTL

274

reactor for production of organic bio-crude and aqueous byproducts.

275

Because the maximum programmable temperature of GC × GC – TOF – MS was 250°C,

276

higher molecular weight compounds cannot be identified using this method. Therefore, these

277

aqueous samples were analyzed using conventional GC-MS with a maximum programmable

278

temperature of 300°C. High molecular weight compounds were identified in aqueous streams

279

generated from HTL of sugar beet tailings (shown in Figure S7) but were not quantified in this

280

study.

281

The total carbon and inorganic carbon contents were determined prior to quantifying the

282

organic compounds present in the aqueous byproducts obtained from HTL of municipal wastes,

283

food industry wastes, and biomass feedstocks grown on wastes,. The total carbon content

284

determined for aqueous byproducts collected from HTL of municipal waste, food industry

285

wastes, and biomass feedstocks grown on food/municipal wastes are in the 1.0 to 3.0 wt% range

286

(shown in Figure 5). The amounts of these identified compounds present in all of the aqueous

287

byproduct generated from HTL of both food industry and municipal wastes are shown in Table

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

288

2. The total amounts of quantified organic carbon compared to the total organic carbon for each

289

sample is shown in Figure 6. The quantified carbon (except for FIW04) is in the 40 to 70% range

290

of the total organic carbon. The quantified carbon for the aqueous stream produced from HTL of

291

extracted grains from beer brewing is 25% of the total organic carbon. This may be due to the

292

presence of many low concentration compounds that are below the detection limit for gas and

293

liquid chromatography. The high amount of ethanol present in the aqueous phase of the two

294

grape pomace samples (1.5% and 2%) are by far the highest observed for any aqueous phase

295

from HTL to date33-34. It is probable a significant amount of ethanol is retained by the wet grape

296

pomace following wine fermentation.

297

Total nitrogen content and ammonia in the aqueous byproducts examined in this paper was

298

also determined. Trace amounts (