ral Sulfone-Containing Styrenes - American Chemical Society

Supporting Information Placeholder. ABSTRACT: We describe herein an organocatalytic enantiose- lective approach for the construction of axially chiral...
2 downloads 0 Views 398KB Size
Subscriber access provided by Monash University Library

Communication

Organocatalytic Enantioselective Construction of Axially Chiral Sulfone-Containing Styrenes Shiqi Jia, Zhili Chen, Nan Zhang, Yu Tan, Yidong Liu, Jun Deng, and Hailong Yan J. Am. Chem. Soc., Just Accepted Manuscript • DOI: 10.1021/jacs.8b03211 • Publication Date (Web): 21 May 2018 Downloaded from http://pubs.acs.org on May 21, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Organocatalytic Enantioselective Construction of Axially Chiral Sulfone-Containing Styrenes Shiqi Jia, Zhili Chen, Nan Zhang, Yu Tan, Yidong Liu, Jun Deng and Hailong Yan* Chongqing Key Laboratory of Natural Product Synthesis and Drug Research, School of Pharmaceutical Sciences, Chongqing University, Chongqing 401331, P. R. China. Supporting Information Placeholder ABSTRACT: We describe herein an organocatalytic enantiose-

Scheme 1. Background and Project Synopsis

lective approach for the construction of axially chiral sulfonecontaining styrenes. Various axially chiral sulfone-containing styrenes compounds were prepared with excellent enantioselectivities (up to >99% ee) and almost complete E/Z-selectivities (>99% E/Z). Furthermore, the axially chiral sulfone-containing styrenes could be easily converted into phosphonic acid, S/P ligand, which could be potentially used as organocatalysts or ligands in asymmetric catalysis.

As a member of the axially chiral family, axially chiral styrene1 was firstly proposed to demonstrate a new concept of the memory of chirality by Kawabata et al.2 in 1991. Their enantiomers exist due to the restricted rotation around a single bond between a substituted alkene and an aromatic ring. The use of chiral olefins3 as ligands in metal mediated catalysis has revolutionized the fields of organometallic chemistry and asymmetric synthesis. Axially chiral styrenes can be used as a potential chiral catalyst, ligand or substrate to induce the selectivity in chemical transformations. Consequently, the development of methods for enantioselective synthesis of these axially chiral styrenes is an important task in organic chemistry. Unlike well-established synthetic approaches for the construction of biaryl atropisomers4, the enantioselective construction of axially chiral styrenes remains a daunting challenge in modern organic synthesis. To date, only a few examples of the enantioselective construction of axially chiral styrenes have been reported by the research groups of Robert W. Baker5, Sotaro Miyano6, Gu7 and Smith8. Recently, the seminal work on organocatalytic atroposelective synthesis of axially chiral styrenes via a direct enantioselective reaction of the nucleophilic addition to alkynal was published by Tan.9 Despite these progresses, a practical enantioselective synthetic route allowing various substitution patterns is still highly desirable. Sulfones10 are important class of pharmaceutically relevant compounds because of their wide spectrum of biological activities, such as cancer agents, secretase inhibitors for the treatment of Alzheimer’s disease, and antibacterial agents. The synthesis of hybrid molecules with more than one pharmacological property has gained momentum recently.11 In this regard, integrating the features of axially chiral styrenes and sulfones into a single molecule is expected to increase the diversity of pharmaceuticals with new pharmacological activities. However, to the best of our knowledge, the asymmetric method for the enantioselective preparation of axially chiral sulfone-containing styrenes has not been reported.

Recently we reported the first asymmetric intramolecular [4+2] cycloaddition of vinylidene ortho-quinone methide (VQM), derived from 2-ethynylphenol derivatives, with benzofuran.12 As part of an ongoing effort in our group to explore the application of vinylidene ortho-quinone methide (VQM) in asymmetric synthesis, we presumed that if an activated nucleophile could attack the highly electrophilic VQM intermediate, a formal nucleophilic addition13 of VQM intermediate and subsequent aromatization would occur and afford axially chiral styrenes (Scheme 1). Since we were interested in the research field of sulfone chemistry, we decided to use the sulfone-type nucleophilic reagents to verify our conception. We initially evaluated the reaction between 1(phenylethynyl)naphthalen-2-ol 1a and sodium benzene sulfinate14 2a in CHCl3 in the presence of quinine-derived thiourea A15 at room temperature. Unfortunately, the reaction did not provide any desired product, this possibly attributed to the poor solubility of sodium benzenesulfinate in CHCl3. After optimizing the

Scheme 2. Initial Attempt

ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

reaction conditions, the desired product was obtained with low yields and enantioselectivities when the polar solvent such as 1,4dioxane and acetonitrile were used (Scheme 2). This preliminary progress encouraged us to search for a more efficient catalytic system for this transformation.

Table 1. Optimization of the Reaction Conditionsa

lower yields (Table 1, entries 6-7). The enantioselectivity and yield of this reaction dropped sharply when more acidic hydrochloride was used (Table 1, entry 8). With the best catalyst system in hand, the solvent effect on this reaction was evaluated and various solvents including dichloromethane, toluene, THF, and acetonitrile were examined. However, all of these solvents proved to be worse in terms of chemical yields and stereoselectivities (Table 1, entries 9-12). Furthermore, increasing the equivalent of the boric acid provided a small benefit to the chemical yields (Table 1, entries 13-14). Finally, by prolonging the reaction time to 48 h, the yield of the reaction could be increased to 85% (Table 1, entry 15). Under the optimized reaction conditions, the use of D-proline can also gave the same enantioselectivity as L-proline. This result indicated that the chirality of proline is not responsible for the induction of high enantioselectivity and the bifunctional thiourea catalyst A dominated the enantioselectivity. Moreover, the structure and absolute configuration of the product were further confirmed by X-ray crystallographic study. Studies on thermal racemization demonstrated that the half-life of enantiopure 3a was about 1733 h at 90 oC in toluene (see Supporting Information for details).

Scheme 3. Preliminary Mechanistic Studies entry

cat.

additive (equiv.)

solvent

yield (%)b

ee (%)c

1

A

-

CHCl3

49

66

2

B

-

CHCl3

15

72

3

C

-

CHCl3

62

32

4

D

-

CHCl3

27

40

5

A

H3BO3 (1.0)

CHCl3

75

99

6

A

malonic acid (1.0)

CHCl3

8

75

7

A

benzoic acid (1.0)

CHCl3

30

96

8

A

HCl (6.0 M) (1.0)

CHCl3

5

54

9

A

H3BO3 (1.0)

CH2Cl2

45

98

10

A

H3BO3 (1.0)

toluene

70

99

A

H3BO3 (1.0)

THF