OXFORD
Reagent Chemicals American Chemical Society Specifications Ninth Edition
• Updated for January 2000 with official ACS Committee on Analytical Reagents specifications. • New section on standard grade reference materials containing over 400 standards with their requirements and tests. • Specifies reagents suitable for use in ultra-trace analysis. • Includes new analytical techniques of mass, infrared and plasma emission spectroscopy. • Extensive Tables. The latest edition of this indispensable reference continues in the traditions of the previous volumes, providing detailed specifications and analytical procedures for approximately 450 laboratory reagents, while updating some of the more complicated classical procedures for trace analysis and adding instrumental methods where possible. New to Reagent Chemicals, 9th editiotr.The addition of standard-grade reference materials at the request of the EPA and The Chemical Reference Materials Manufacturers Association, featuring 400 specified standards in a section separate from the traditional reagent chemicals. Other important additions include reagents for use in ultra trace analysis, such as sub-boiled acids packaged in Teflon containers, and new analytical techniques such as plasma emission spectroscopy and "clean room" analytical procedures that are required in the use of these reagents. This rigorous volume, with its many specifications, up-to-date procedures, and constant improvement through years of research, is an essential tool in assuring the required quality of your reagent chemicals and another step towards the worldwide unification of reagent chemicals specifications. (An American Chemical Society Publication) September 1999 768 pp.; 113 line illus 32. 0-8412-3671-2 $165.00w/$132.00
CONTENTS DEFINITIONS, PROCEDURES, STANDARDS, AND SPECIFICATIONS 1. Introduction and Definitions: Reagents for Special Purposes, Containers, Interpretation of Requirements, Precautions for Tests 2. General Directions and Procedures: Gravimetric Method for Determining Small Amounts of Impurities, Measurement of Physical Properties, Colorimetry and Turbidimetry, Trace and Ultratrace Elemental Analysis, Direct Electrometric Methods, Titrimetry: Electrometric End-Point Detection, Chromatography, Recommended Chromatography Procedures, Infrared Spectroscopy 3. Reagent Solutions: Preparation: Reagent Water, Water, Reagent Solutions, Solid Reagent Mixtures, Control and Standard Solutions, Reagent Chemicals 4. Volumetric Solutions: Preparation and Standardization 5. Registered Trademarks 6. References SPECIFICATIONS FOR REAGENT CHEMICALS Requirements and Tests SPECIFICATIONS FOR STANDARD-GRADE REFERENCE MATERIALS Requirements and Tests
To order, or for more informaiion, please write to: OXFORD UNIVERSITY PRESS • 198 Madison Avenue, N e w York, NY 10016. To order any book by credit card, call toll-free 1-800-451-7556. Prices and publication dates are subject to change.
wrww.oup-usa.org/acs
