Real-Time Online Monitoring for Assessing Removal of Bacteria by

5 days ago - Rigorous monitoring of microbial water quality is essential to ensure the safety of recycled water after advanced treatment for indirect ...
0 downloads 4 Views 550KB Size
Subscriber access provided by Universiteit Utrecht

Novel Remediation and Control Technologies

Real-time Online Monitoring for Assessing Bacteria Removal by Reverse Osmosis Takahiro Fujioka, Anh Tram Hoang, Hidenobu Aizawa, Hiroki Ashiba, Makoto Fujimaki, and Menu Leddy Environ. Sci. Technol. Lett., Just Accepted Manuscript • DOI: 10.1021/acs.estlett.8b00200 • Publication Date (Web): 26 Apr 2018 Downloaded from http://pubs.acs.org on April 26, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 16

Environmental Science & Technology Letters

1

Real-time Online Monitoring for Assessing Bacteria Removal

2

by Reverse Osmosis

3

Takahiro Fujioka,†,* Anh T. Hoang,† Hidenobu Aizawa,‡

4

Hiroki Ashiba,§ Makoto Fujimaki,§ Menu Leddy,ǁ



5 6 7

Nagasaki University, 1-14 Bunkyo-machi, Nagasaki 852-8521, Japan ‡

Environment Management Research Institute, National Institute of Advanced Industrial Science

8 9

Water and Environmental Engineering, Graduate School of Engineering,

and Technology (AIST), 16-1 Onogawa, Tsukuba, Ibaraki 305-8569 Japan §

Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science

10

and Technology (AIST), Central 5, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan

11

ǁ

12 13 14

Orange County Water District, 18700 Ward Street, Fountain Valley, CA 92708, USA

_______________________ * Corresponding author: Takahiro Fujioka, Email: [email protected], Tel: +81 095 819 2695, Fax: +81 95 819 2620

ACS Paragon Plus Environment

Environmental Science & Technology Letters

15

Abstract

16

Rigorous monitoring of microbial water quality is essential to ensure the safety of recycled water

17

after advanced treatment for indirect and direct potable reuse. This study evaluated real-time

18

bacterial monitoring for assessing reverse osmosis (RO) treatment for removal of bacteria. A

19

strategy was employed to monitor bacterial counts on-line and in real time in RO feed and

20

permeate water using a real-time continuous bacteriological counter. Over the course of 68-hours

21

pilot-scale testing, bacterial counts were monitored in real-time at an approximate range of

22

1×103–4×104 and 4–342 counts/mL in RO feed (ultrafiltration-treated wastewater) and permeate,

23

respectively. The results indicate that the bacteriological counter can track the variations in

24

bacterial counts in RO feed and permeate. Bacterial concentrations were confirmed by Epi-

25

fluorescence microscopy for total bacterial counts. A high correlation (R2 = 0.83) was identified

26

between the online bacterial counts and Epi-fluorescence counts in RO feed; a negligible

27

correlation was observed for RO permeate. In this study we evaluated a real-time bacteriological

28

counter (i.e. counts/mL every second) to ensure continuous removal of bacterial contaminants by

29

RO treatment.

30

1

ACS Paragon Plus Environment

Page 2 of 16

Page 3 of 16

Environmental Science & Technology Letters

31

INTRODUCTION

32

Potable reuse (PR) has been increasingly used to augment potable water supplies in arid regions.1,

33

2

34

and reliability in recycled water quality, particularly microbiological quality, is a critical

35

component for public health protection. This is especially important for direct potable reuse

36

(DPR), where highly treated wastewater at advanced water treatment plants (AWTPs) is directly

37

used as a potable water source without going through an environmental buffer.3 At AWTPs,

38

reverse osmosis (RO) membrane process can have an important role in removing most of the

39

dissolved ions, trace organic chemicals and microorganisms in treated wastewater.4 However, the

40

credibility of RO membranes for removing microorganisms and pathogens has been undervalued.

41

For example, current RO membrane integrity monitoring methods are mostly based on the

42

removal of surrogate substances: total organic carbon (TOC) and electrical conductivity; these

43

surrogate indicators provide up to a 2-log reduction (i.e. 99% removal) for viruses and protozoa.5

44

Bacterial water quality has also attracted much attention in DPR to minimize health risk of

45

infection from enteric bacterial pathogens such as Salmonella spp.3, 5, 6 For example, a 9-log

46

reduction of total coliform bacteria through the treatment processes has been suggested for

47

DPR.7

48

Considering RO membrane deterioration over time and unforeseen spikes of bacteria in raw

49

sewage, the implementation of continuous monitoring of bacterial contaminants at low

50

concentrations after RO treatment or in RO permeate will considerably enhance monitoring for

51

bacterial contaminants in recycled water for water quality disruptions. For this purpose, the

52

analytical instruments must be fast, reliable, sensitive and accurate. Many commercial devices

Potable reuse turns treated wastewater effluent into potable water; thus, the assurance of safety

2

ACS Paragon Plus Environment

Environmental Science & Technology Letters

53

are capable of detecting bacteriological cells within a short analysis time (every 5 min to several

54

hours).8 Among them, flow cytometric bacterial cell counters combined with general nucleic acid

55

staining is an emerging technology capable of rapidly counting total bacterial cells.9, 10 In recent

56

years, several near real-time or real-time bacteriological sensing technologies (e.g. BioSentry

57

sensor)11 have been evaluated for relatively clean waters including drinking water.12

58

Nevertheless, to date, real-time monitoring techniques have not been fully established in potable

59

reuse due to limitations with availability and adaptability in analyzing treated wastewater.

60

A real-time continuous bacterial counting technique that is capable of monitoring bacterial

61

counts as low as one count per second in ultrapure water at a flow rate of 0.16 mL/s was

62

evaluated with RO feed and permeate of ultrafiltration (UF)-treated secondary wastewater in this

63

study. The real-time bacteriological counter can differentiate bacterial and non-bacterial particles

64

using auto-fluorescence light emitted from riboflavin and nicotinamide adenine dinucleotide -

65

hydrogen (NADH) and their scattered light.13 This technique has an advantage of speed, no

66

additional chemicals and sensitivity over other bacteriological monitoring technologies,

67

including flow cytrometry that has a range of approximately 20–100 cells/mL.14, 15 In addition to

68

continuous online monitoring for bacteria, this technique, when applied to RO feed and permeate,

69

has a potential application for real-time membrane integrity monitoring. However, big challenges

70

for real-time RO monitoring in RO feed are interferences by humic-like substances that can mask

71

the detection of bacterial counts.16 To enable online monitoring of RO feed, a new strategy was

72

adopted for the RO feed that is likely to contain higher concentrations of bacteria than RO

73

permeate was continuously diluted on line in real-time.

74

This study aimed to evaluate the ability of real-time bacteriological counters to ensure that

75

microbial contaminants are being removed by RO treatment. The study was performed by 3

ACS Paragon Plus Environment

Page 4 of 16

Page 5 of 16

Environmental Science & Technology Letters

76

tracking the variation in bacterial counts in RO feed and permeate at the pilot scale. The

77

reduction in bacterial counts by RO treatment was confirmed by determining the total bacterial

78

counts using Epi-fluorescence microscopy.

79

MATERIALS AND METHODS

80

Analytical techniques

81

Two real-time bacteriological counters (IMD-WTM, Azbil Corporation, Tokyo, Japan) were used

82

to monitor bacterial counts in the RO feed and RO permeate in real-time. The real-time counter

83

is capable of detecting the number of bacterial particles at one count per second by introducing

84

part of the sample flow into the counter at a sampling flow rate of 0.16 mL/s. In other words, it

85

can provide bacterial counts at as low as 1 counts/mL every second. The real-time

86

bacteriological counter first irradiates the excitation light (wavelength = 405 nm) to the running

87

sample solution, which primes the system to identify particles with scattered light (Fig. S1). If

88

the particle is a bacteria, intrinsic fluorescence emission is induced due to their auto-fluorescence

89

property from riboflavin and NADH. The intensity of faint fluorescent light is received by two

90

fluorescence detectors with different wavelength bands (wavelength = about 415–450 and 490–

91

530 nm) (Fig. S1). Particles holding a certain level of auto-fluorescence light are recognised as

92

bacteria and counted as biological particle. The real-time instrument counts all particles similar

93

in size to bacteria in the sample and determines whether they are bacterial or non-bacterial

94

particles. To confirm the real-time bacteriological counts, this study also analysed total bacterial

95

counts using a fluorescence microscopy method with 4’-6-diamidino-2-phenylindole (DAPI) dye

96

(Text S1). Excitation emission matrix (EEM) fluorescence spectra were obtained using Aqualog

97

(Horiba, Kyoto, Japan). Details for the analytical conditions can be found elsewhere.17

4

ACS Paragon Plus Environment

Environmental Science & Technology Letters

98

Validation protocol

99

A pilot-scale cross-flow RO filtration system comprised of a 4-in. spiral wound RO membrane

100

element with the surface area of 7.43 m2 (ESPA2-LD-4040, Hydranautics/Nitto, Oceanside, CA,

101

USA) was used (Fig. S2 and Text S2). The operation was performed by recirculating RO

102

permeate and concentrate into the feed reservoir and maintained at a permeate flux of 20 L/m2h,

103

RO feed temperature of 14–16 °C and a recovery of 20% (permeate and concentrate flow rate =

104

2.5 and 10 L/min, respectively). To stabilize the process condition, the RO system was first

105

operated using a drinking water disinfected with chlorine (