Recent Advances in the Application of Inorganic Salt Pretreatment for

Sep 1, 2015 - Bandar Sunway, Selangor Darul Ehsan, Malaysia. §. Department of Chemical and Process Engineering, Faculty of Engineering and Built ...
1 downloads 0 Views 6MB Size
Subscriber access provided by UNIV OF NEBRASKA - LINCOLN

Review

Recent Advances in Application of Inorganic Salt Pretreatment for Transforming Lignocellulosic Biomass into Reducing Sugars Yu-Loong Loow, Ta Yeong Wu, Khang Aik Tan, Yung Shen Lim, Lee Fong Siow, Jamaliah Md. Jahim, Abdul Wahab Mohammad, and Wen Hui Teoh J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.5b01813 • Publication Date (Web): 01 Sep 2015 Downloaded from http://pubs.acs.org on September 6, 2015

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 48

Journal of Agricultural and Food Chemistry

1 1

Recent Advances in Application of Inorganic Salt Pretreatment for Transforming

2

Lignocellulosic Biomass into Reducing Sugars

3 4

Yu-Loong Loowa, Ta Yeong Wua*, Khang Aik Tana, Yung Shen Lima, Lee Fong Siowb, Jamaliah

5

Md. Jahimc, Abdul Wahab Mohammadc, Wen Hui Teohd

6 7

a

Selatan, 47500 Bandar Sunway, Selangor Darul Ehsan, Malaysia

8 9

b

School of Science, Monash University, Jalan Lagoon Selatan, 47500 Bandar Sunway, Selangor Darul Ehsan, Malaysia

10 11

Chemical Engineering Discipline, School of Engineering, Monash University, Jalan Lagoon

c

Department of Chemical and Process Engineering, Faculty of Engineering and Built

12

Environment, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor Darul Ehsan,

13

Malaysia

14 15

d

Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia.

16 17

ABSTRACT: Currently, the transformation of lignocellulosic biomass into value-added products

18

such as reducing sugars is garnering attention worldwide. However, efficient hydrolysis is usually

19

hindered by the recalcitrant structure of the biomass. Many pretreatment technologies have been

20

developed to overcome the recalcitrance of lignocellulose such that the components can be

21

reutilized more effectively to enhance sugar recovery. Among all of the utilized pretreatment

22

methods, inorganic salt pretreatment represents a more novel method and offers comparable sugar

23

recovery with a potential for reducing costs. The use of inorganic salt also shows improved

24

performance when it is integrated with other pretreatment technologies. Hence, this review is

25

aimed to provide a detailed overview of the current situation for lignocellulosic biomass and its

26

physicochemical characteristics. Furthermore, this review discusses some recent studies using

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 2 of 48

2 27

inorganic salt for pretreating biomass and the mechanisms involved during the process. Finally,

28

some prospects and challenges using inorganic salt are highlighted in this review.

29 30

KEYWORDS: Cellulose, hemicellulose, lignin, inorganic salt, sustainability, valorization, waste

31

reuse

ACS Paragon Plus Environment

Page 3 of 48

Journal of Agricultural and Food Chemistry

3 32

 INTRODUCTION

33

Lignocellulosic biomass is plant dry matter that can be considered the most abundantly

34

available material on the earth. Currently, lignocellulosic material is the only renewable resource

35

that contains a carbon source that can be converted into products in solid, liquid and gas forms.1

36

As a result of depleting crude oil reserves and increasing global energy consumption, many

37

countries are relying on carbon-based biomass as an alternative source for fuel production and

38

chemical industries.2 However, the recalcitrant nature of lignocellulosic biomass prevents the

39

hydrolysis and fermentation of the biomass by solvents and microorganisms, which represents a

40

challenge for the effective utilization of the components contained in the biomass. Hence, a

41

pretreatment stage is often required to disrupt the complex structure of the biomass and thereby

42

increase the recovery of components and ensure the economic feasibility of the bioconversion

43

process. Over the years, various pretreatment methods such as dilute acid hydrolysis,3-7 alkaline

44

systems,8-12 autohydrolysis,13-15 steam explosion,16,17 and ionic liquids18 have been heavily

45

scrutinized by researchers. A substantial number of reviews have discussed these conventional

46

lignocellulose pretreatment technologies in detail.19-21 Among the available biomass pretreatment

47

methods, inorganic salt pretreatment is still relatively novel, though it has received considerable

48

attention in recent years. Nonetheless, inorganic salt pretreatment has not been critically discussed

49

in reviews as the other well-established pretreatments have, and little is known about its

50

mechanism, though recent studies22-39 have proven it to be successful. Thus, this review

51

investigates the current situation worldwide for various forms of lignocellulosic biomass such as

52

agricultural waste, energy grasses, and forest residues and discusses the complex structure of

53

lignocellulose to identify the source of its recalcitrant nature. In addition, this review provides a

54

critical overview on the recent use of inorganic salts as one of the more novel biomass

55

pretreatment methods, the mechanisms involved during the pretreatment process, and the

56

prospects and challenges.

57 58 ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 4 of 48

4 59

 CURRENT SITUATION OF LIGNOCELLULOSIC BIOMASS

60

Lignocellulosic biomass can be categorized into (1) agricultural wastes that arise mainly

61

from various agricultural and farming activities, (2) energy crops that are grown for biofuel or

62

electricity production, and (3) forestry residues from forest logging sites and management

63

operations. Figures 1 and 2 depict the major sources of lignocellulosic biomass that are currently

64

available as a feedstock to produce value-added products40-43 and the statistical global production

65

of potentially available lignocellulosic biomass,41 respectively.

66

Agricultural Wastes. Agricultural wastes consist of crop residues such as corn

67

stover/stalks, sugarcane bagasse, and crop straws. Table 1 represents some major types of

68

lignocellulosic crops and their availability in different countries as of 2013.44,45 Due to the

69

extensive agricultural activities in various countries, Menon and Rao estimated that up to 1.5 ×

70

1011 tons of agricultural wastes contribute to the yearly global yield of lignocellulosic biomass.46

71

For example, approximately 400 million tons of rice and wheat straw along with corn stalks are

72

harvested in the United States each year. In mainland China, 700-800 million tons of agricultural

73

residues are produced annually, and half of that amount is used as bioresources in the production

74

of fuels and chemicals.1,47,48 Brazil, which is the largest producer of sugarcane globally, generates

75

185 million tons of sugarcane bagasse per harvest.49 Agricultural residues such as rice husks are

76

used to produce electricity in gasification units and have been scrutinized intensely for use in

77

silica production.47 Additionally, rice husks were reported to be a potential source of biofertilizer

78

after undergoing a biodegradation process.50,51 Moreover, agricultural residues could be

79

reprocessed into animal feed and used for farm cultivation.48 However, agricultural residues are

80

still underutilized because a large portion of this biomass is discarded as a waste.46 For instance,

81

10% of the corn straw in United States is collected for reuse purposes such as mulching, but most

82

of the rice straw is disposed of by burning, which results in air pollution.2,49,52,53 Rocha et al. also

83

highlighted that certain components of agricultural residues such as sugarcane bagasse are still

84

underutilized, though these residue components could potentially serve forty different

85

applications.49 ACS Paragon Plus Environment

Page 5 of 48

Journal of Agricultural and Food Chemistry

5 86

Annual and Perennial Dry Energy Grasses. Annual and perennial energy crops are

87

produced mainly to serve as the raw materials in the production of biofuel due to their prominent

88

characteristic of being low-cost and low-maintenance, which leads to economic and

89

environmental advantages over other various forms of biomass.40 For instance, these crops, which

90

are normally densely planted, have the distinctive trait of high yields and do not require annual re-

91

seeding once established.54 Some of the common forms of energy crop biomass are illustrated in

92

Table 2, where switchgrass and Miscanthus straw are among the main contributors annually, with

93

5-19 and 5-43 tons/ha/year, respectively.42 Similarly, the cost of both maintenance and investment

94

are low for these perennial grasses because they require less harvesting and fertilizers, which

95

account for the major portion of the total cost.43 Energy crops are able to grow under poor soil

96

conditions without compromising the energy yield. A steady supply flow of these perennial crops

97

could be obtained, thus avoiding the concern of requirement for costly storage for large biomass

98

volumes.42 In both the United States and Canada, switchgrass serves as a major crop due to its

99

abundant availability and its ability to resist both disease and harsh environments.42 The effective

100

growth of Miscanthus is well known in Asia, whereas in European regions, Miscanthus is grown

101

as a source of combustible energy.19 In African grasslands, minimal amounts of nutrients are

102

required for growing Napier grasses, which can swiftly be harvested and yield high amounts of

103

lignocellulosic biomass.

104

Forestry Waste. Woody raw materials such as saw mill residues and wood chips are more

105

flexible in terms of harvesting times. Thus, long latency periods for forestry waste storage can

106

also be avoided.43 Conventionally, the lignin content in woody feedstock is greater and contains

107

less ash,40 and woody raw materials are thus used in the manufacture of paper and pulp.43 Because

108

of these characteristics, high densities of woody biomass are considered to be more attractive for

109

cost-effective transportation. In China, approximately 900 million tons of forestry wastes and

110

products are produced annually, and one third of the entire amount of waste could be converted

111

into renewable energy sources.1 Correspondingly, short-rotation forest crops are cultivated for the

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 6 of 48

6 112

production of wood chips to serve as a substitute for fossil fuels and other products such as

113

geotextiles and building materials in Europe.55

114 115 116

 COMPOSITIONAL

AND

STRUCTURAL

CHARACTERISTICS

OF

LIGNOCELLULOSIC BIOMASS

117

Lignocellulosic biomass is basically composed of different layers of plant cell wall (Figure

118

3).56 First, the primary wall is formed, followed by the secondary wall layers, through the

119

deposition of wall substances into the primary wall, where most cells are elongated and stretched

120

during differentiation. The chemical composition of the cell walls is dependent on the species of

121

the plants. Some cells contain only non-lignified primary cell wall, whereas others possess a

122

thickened secondary cell wall that is normally lignified. This lignified secondary cell wall consists

123

of a multilayered structure. As shown in Figure 4,57 the outer part of a softwood bleached kraft

124

pulp (SBKP) is the highly lignified compound that consists of middle lamellae and primary wall,

125

followed by a thin S1 layer, a thick, less lignified middle S2 layer, a thin inner S3 later and finally,

126

a warty layer formed by lignin precursors.58 This lignified secondary wall accounts for the

127

majority of the plant biomass and usually comprises 40-50, 15-25, 20-25 and 5-10% of cellulose,

128

hemicellulose, lignin and other components, respectively.57,59 Other minor non-structural

129

components, such as proteins, ash, extractives and pectin, are dependent on factors such as the

130

different species, tissues, plant maturity, harvest times and method of storage and environmental

131

factors. Extractives are usually complex mixtures that consist of sugars, terpenoid compounds and

132

monolignols.60 Every plant has its own floral cell walls with different amounts of specific

133

compounds.59 Some of the components of lignocellulosic biomass that consist primarily of

134

agricultural residues are summarized in Table 3.59-63

135

Cellulose. Normally, cellulose accounted for 30-40% of floral cell walls. Cellulose is a β-

136

1, 4-linked glucose polysaccharide that comprises the larger portion of the cell wall that is

137

common to all plants. Cellulose is long, consists of oriented microfibrils, and has the ability to

138

coalesce into larger and longer fibrils. These fibrils are hydrophobic and highly crystalline, which ACS Paragon Plus Environment

Page 7 of 48

Journal of Agricultural and Food Chemistry

7 139

enhances the recalcitrance of biomass.60 The FE-SEM (Field Emission Scanning Electron

140

Microscopy) image of microfibrils (Figure 5) can be seen clearly from the untreated SBKP.57

141

Therefore, decomposition of the fibril is difficult hydrolytically because of its connected area of

142

crystalline and amorphous structures.59 Generally, cellulose can withstand higher decomposition

143

temperatures than hemicellulose and lignin, with decomposition occurring at a temperature of

144

approximately 320-356°C.61

145

Hemicellulose. Hemicellulose is known as the second most abundant polymer on earth,

146

with an estimated production of 60 billion tons annually, and it comprises 30-35% of floral cell

147

walls.59,62 Hemicellulose chains usually interact with one or more cellulose fibrils to form non-

148

covalent cross-links between cellulose bundles. As an example, hardwood species are composed

149

mainly of glucuronoarabinoxylans, which are formed by the complex pentose sugar chain.

150

Conversely, softwood species are the combination of galactoglucomannans with a backbone of β-

151

1,4-linked D-mannopyranose and D-glucopyranose units.60 Furthermore, hemicellulose consists of

152

different branches of complex carbohydrate structures (xylose, arabinose, mannose, glucose, and

153

galactose) that are not recalcitrant to conversion to monomeric sugars because of its amorphous,

154

branched and single-chain polysaccharides. Therefore, hemicellulose is more favored for the

155

hydrolysis process than cellulose is.59,60 The processing step of extraction of the hemicellulose

156

from biomass can produce or liberate compounds such as acetic acid, which eventually will help

157

in autohydrolysis pretreatment. However, acetic acid may inhibit subsequent fermentation steps,

158

thereby lowering the production of ethanol and other compounds.62

159

Lignin. Lignin accounted for 11-25% of floral cell walls. Lignin is known as an

160

amorphous phenolic macromolecule that can be found only in the secondary cell wall. Three

161

primary units, namely, guaiacyl (G), sinapyl (S) and p-hydroxyphenyl (H) are linked by aryl ether

162

or C-C bonds to form lignin.58 The high level of heterogeneity of lignin is synthesized through the

163

oxidative coupling of 4-hydrophenylpropanoids during secondary cell wall deposition, which

164

results in layers of lignin in different monomers. Lignin acts as a protective barrier with

165

impermeability and immunity to prevent an attack from microorganisms and chemical degradation ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 8 of 48

8 166

by restricting the accessibility of efficient saccharification of cellulosic microfibils.56,59,60

167

Additionally, lignin provides mechanical support and water transport for the cell.61

168

Overall, cellulose provides strength over the cell walls, whereas hemicellulose acts as a

169

wire mesh that circulates around the cellulose and provides enhancement to the strength and

170

linkage. Lignin fills the remaining space and sets everything in place and excludes water from the

171

polysaccharide environment. This unique combination results in the high resistance of

172

lignocellulosic biomass to mechanical and biological degradation.60

173 174

 ROLE AND GOAL OF LIGNOCELLULOSIC BIOMASS PRETREATMENTS

175

Pretreatment is necessary in the bioconversion process to overcome the complex

176

recalcitrant biomass structure. Pretreatment provides higher accessibility for the enzymes to

177

convert cellulose and hemicellulose into useful fermentable sugars during the enzymatic

178

hydrolysis process. When biomass is exposed to pretreatment, several operations, such as the

179

increase in the surface area and porosity, modification of the lignin structure, removal of lignin,

180

partial depolymerization of hemicellulose, and reduction of cellulose crystallinity, can be

181

accomplished. These result in the improvement of the hydrolysis process such that a higher

182

percentage of fermentable sugars can be recovered.64,65 According to Singhvi et al.,66 only 20% of

183

the sugar can be recovered without introducing pretreatment, but 80-83% of the fermentable sugar

184

can be recovered with introduction of a pretreatment process.67 Generally, pretreatment can be

185

categorized into three areas: mechanical, chemical, and biological pretreatments. Mechanical

186

pretreatment such as milling, grinding and chipping reduces the size of the biomass and therefore

187

provides higher surface area and porosity.64 Another important example of mechanical

188

pretreatment is ultrasound pretreatment. Ultrasound pretreatment applies the principle of

189

cavitation that forms millions of microscopic vapor bubbles. The explosion of these bubbles will

190

create high temperature (1700-4700°C) and pressure (1800 bar) in a microsecond, thus producing

191

shockwaves that induce mechanical effects such as breaking larger molecules into smaller

192

fractions with particle size reduction.68,69 Chemical pretreatment involves the disruption of ACS Paragon Plus Environment

Page 9 of 48

Journal of Agricultural and Food Chemistry

9 193

biomass recalcitrance by means of chemical reactions. Some of the conventional methods are

194

liquid hot water, dilute and concentrated acid hydrolysis, alkaline hydrolysis, organosolv,

195

oxidative delignification and room temperature ionic liquids.70 Moreover, certain methods are

196

termed “physicochemical” pretreatments because they involve the integration of both mechanical

197

and chemical pretreatment, such as steam explosion and CO2 explosion.64 Biological pretreatment

198

involves the use of environmentally friendly enzymes such as cellulase and hemicellulase to break

199

down complex carbohydrates into simple sugars.70 However, enzymatic hydrolysis is usually

200

inefficient if it is applied directly to biomass, unless the biomass has already undergone the

201

aforementioned mechanical or chemical pretreatments. The advantages/disadvantages of some

202

common biomass pretreatments are tabulated in Table 4.3-18,20,21,35,38,70-75

203 204

 USE OF INORGANIC SALTS FOR BIOMASS PRETREATMENT

205

One of the most novel pretreatment technologies that has attracted interest is the use of

206

inorganic salts either as aqueous solutions in an acid-free environment or as catalysts in an acid

207

pretreatment system.22 The integration of inorganic salts has also been implemented with

208

organosolv23,24 and microwave irradiation25. This inorganic salt pretreatment method has been

209

used to pretreat various types of lignocellulosic biomass, as shown in Table 5.22-24,26-38 Some

210

examples of inorganic salts are NaCl, KCl, CaCl2, MgCl2, Fe2(SO4)3, FeCl2, FeSO4, and FeCl3,

211

which have been proven to increase the hydrolysis rate and yield of cellulose or

212

hemicelluloses.27,30,31 Among all of the inorganic salts, FeCl3 has been proven to be the most

213

effective inorganic salt and could be used to replace acid for biomass hydrolysis.70 FeCl3 has the

214

capability to solubilize hemicelluloses into monomeric and oligomeric sugars in liquid

215

hydrolysate with large amounts of xylose while producing a cellulose-rich solid substrate that is

216

highly useful in enzymatic hydrolysis for producing glucose at a later stage.28,32 Therefore,

217

inorganic salts possess potential for the production of both cellulosic bioethanol and value-added

218

chemicals from hemicellulose-derived sugars.

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 10 of 48

10 219

Hemicellulosic Sugar Recoveries. Pretreatment of biomass is carried out mostly to

220

produce cellulosic bioethanol via fermentation. However, only limited studies have shown a

221

remarkable recovery of hemicellulosic sugars from the biomass. One of the pretreatments that has

222

been extensively studied is dilute acid hydrolysis, where Fields and Wilson76 found that

223

temperatures between 100 and 150°C were usually preferred in xylose production. To compare

224

the performance of inorganic salts with dilute acid in the aforementioned temperature range,

225

Marcotullio et al.38 investigated the selective production of hemicellulose-derived carbohydrates

226

using FeCl3. At 120°C and 120 min, FeCl3 achieved a performance comparable to that of HCl,

227

with a total monomeric xylose yield of 20.6 wt% of the initial wheat straw in the hydrolysate.

228

Dilute acid hydrolysis of hemicelluloses and cellulose also produced higher amounts of

229

fermentable sugar yields when the biomass was first impregnated with FeSO4, again proving the

230

positive effect of an inorganic salt in the pretreatment of lignocellulosic biomass.39 Nevertheless,

231

the optimal operating conditions reported for hemicellulosic sugar recovery by using inorganic

232

salt pretreatment have been somewhat contradictory. According to Linares et al.,33 the use of 0.26

233

mol/L of FeCl3 at 153°C and 30 min produced a maximum of 63.2% total hemicellulosic sugar

234

recovery from olive tree biomass. Liu et al.27 reported 89.0% xylose recovery when corn stover

235

was pretreated with 0.1 mol/L of FeCl3 under almost similar conditions (140°C, 20 min) as

236

Linares et al.33 Thus, it can be concluded that the optimal operating conditions for inorganic salt

237

pretreatment vary depending on the biomass and the inorganic salt used. Generally, more severe

238

operating conditions are not suggested for sugar recovery from the biomass because the conditions

239

may cause sugar degradation to furfurals and/or other degradation products. Nevertheless, it is

240

important to achieve a balance between pretreatment severity and reducing sugar production by

241

using Equation (1).29,77 CS = logI – pH = log [t . exp[(TH – TR)/14.75] – pH

242

Equation (1)

243

where CS (unitless) is the combined severity parameter, t (min) is the pretreatment time, TH (°C)

244

is the reaction temperature, TR (100°C) is the reference temperature, and pH is the final pH of the

245

solution. ACS Paragon Plus Environment

Page 11 of 48

Journal of Agricultural and Food Chemistry

11 246

At low severity, hemicelluloses could not be degraded, whereas at high severity, the yield

247

of xylose was minimal due to the degradation of xylose into inhibitors, though up to 100% of

248

hemicellulose degradation was achieved.29,71 As a case in point, a high FeCl3 concentration >0.10

249

mol/L accelerated the dissolution of oligomeric xylose to monomeric xylose and then monomeric

250

xylose to degradation products, but not the transformation from xylan into oligomeric xylose.27 At

251

a temperature of 180°C, the degradation of xylose and xylotriose was increased by 6- and 49-fold,

252

respectively, when the xylose monomer and oligomer mixture were pretreated with 0.8% of FeCl3

253

compared with using pressurized hot water.78 However, the hemicellulose structure generally

254

forms chemical bonds with cellulose and lignin that are more complicated than the pure monomer

255

and oligomer interactions in the synthetic mixture.32 Less severe parameters may be incapable of

256

breaking down the hemicellulose structure, despite degrading the monomer and oligomer into

257

inhibitors. Sun et al.29 obtained the highest sugar content and a low inhibitor concentration at a

258

moderate combined severity of 0.32, when the severity parameter ranged from 0 to 1.81. The

259

efficient solubilization of hemicellulose by using inorganic salts could be attributed to the reduced

260

activation energy requirements for biomass hydrolysis.39 Hence, in the case of pentose-oriented

261

pretreatment, operating at mild temperatures and nearly atmospheric pressure could be a realistic

262

option.38

263

Cellulosic Sugar Recoveries. In the context of glucose recovery, the removal of

264

hemicelluloses and lignin fractions of the lignocellulosic biomass is essential during the

265

pretreatment process. FeSO4 was able to selectively hydrolyze up to 95.0% of the hemicelluloses

266

into a liquid fraction, with the cellulose still remaining in the biomass residue.22 As a result of

267

removing hemicellulose from the solid fraction, the subsequent enzymatic hydrolysis was

268

enhanced by promoting cellulose exposure and enzymatic activity of cellulase.22 Liu et al.28

269

achieved a high enzymatic hydrolysis of 98.0% for the solid residue after undergoing a

270

pretreatment process using 0.1 mol/L of FeCl3, which contributed to 93.0% of the glucose

271

recovery. In another notable study, Zhang et al.37 achieved a satisfactory glucose yield of 61.7%

272

via the enzymatic hydrolysis of pretreated cattail solid residue. Remarkably, the addition of 0.1 ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 12 of 48

12 273

mol/L of FeCl3 during the organosolv pretreatment also removed all hemicelluloses while

274

conserving approximately 90% of the initial cellulose in the residue for subsequent enzymatic

275

saccharification.23

276

The improvement of enzymatic digestibility and the subsequent increase in the cellulosic

277

sugar recoveries from the biomass residue was attributed to the effects of the inorganic salt

278

pretreatment on the biomass structure. Specifically, the smooth continuous surface of the cellulose

279

was damaged for better enzyme access, and the amorphous hemicelluloses existing as irregular

280

clumps were almost completely removed from the solid residue after introducing Fe(NO3)3

281

pretreatment, as shown in Figure 6.29 Similar changes to the surface morphology of the biomass

282

were also observed when NH4Cl or MgCl2 was used to pretreat Miscanthus straw, as shown in

283

Figure 7.31 According to Kang et al.,31 both NH4Cl and MgCl2 caused damage to the compact

284

structure of Miscanthus straw, but further studies to determine the cause of the different

285

morphology were apparently inconclusive. An application of FeCl3 also exhibited a disruption of

286

the recalcitrant structures of the crystalline cellulose that are normally observed in the biomass.

287

According to Liu et al.,27 the exposure of the cell internal structure and an improved surface area

288

and porosity made the material softer and more readily able to be digested. Hence, the enzymatic

289

digestibility of the solid residue pretreated with 0.1 mol/L of FeCl3 and 50% (w/w) ethanol was

290

observed to reach as high as 89%.23 Moreover, Yu et al.36 managed to enhance the enzymatic

291

digestibility to approximately 86.0% by applying CuCl2 in the flow-through mode. The increase in

292

the crystallinity index could possibly be explained by the fact that high amounts of hemicelluloses

293

were removed without much alteration to the cellulosic structure due to the milder pretreatment

294

conditions.38 Thus, the crystalline structure of the cellulose core was exposed.

295

Production of Inhibitors. When lignocellulosic biomass is pretreated with inorganic salts,

296

low generation of fermentation inhibitors might occur due to pentose dehydration.23,24 Some

297

studies have suggested that inorganic salts might generate fewer inhibitory coproducts compared

298

with the acid hydrolysis pretreatments that are well known to produce high amounts of toxic

299

degradation compounds, primarily acetic acid, furfural, and HMF (5-hydroxymethylfurfural).20 ACS Paragon Plus Environment

Page 13 of 48

Journal of Agricultural and Food Chemistry

13 300

For instance, low concentrations of furfural (0.011 g/L) and HMF (0.148 g/L) were achieved

301

when organosolv was used together with FeCl3.23 The results were in agreement with the results

302

of Kamireddy et al.,26 who found that corn stover produced lower amounts of inhibitors when it

303

was pretreated with CuCl2 or FeCl3 compared with H2SO4 using the same conditions (160°C, 10

304

min). Specifically, CuCl2 obtained approximately 0.42 g/L HMF and 1.50 g/L furfural, and FeCl3

305

produced 0.52 g/L HMF and 1.19 g/L furfural. The HMF and furfural produced during H2SO4

306

hydrolysis were 1.10 and 2.40 g/L, respectively. Nonetheless, the production of inhibitors is

307

heavily dependent on inorganic salt characteristics and pretreatment harshness. Increases in the

308

Fe(NO3)3 concentration and pretreatment time were proven to intensify furfural production.30 The

309

trend of xylose monomer degradation was observed to accelerate significantly when the FeCl3

310

concentration was increased from 0.1 to 0.4%.27 When the concentration of FeCl3 was increased

311

from 100 to 200 mmol/L, Marcotullio et al.38 observed a growth in acetic acid formation from 1.6

312

to 2.6 wt% during the pretreatment of wheat straw at 100°C. Furthermore, temperature had a

313

profound effect on inhibitor production,29,30 where temperatures higher than 160°C favored the

314

conversion of xylose to furfural.23 The increase in pretreatment temperature from 100 to 120°C

315

also caused the concentration of acetic acid to rise from 1.6 to 3.2 wt%, though the FeCl3

316

concentration was maintained.38

317

Nonetheless, some previous studies were also done to test whether inorganic salts could be

318

used for intentional conversion of sugars to furfural.78-80 FeCl3 was found to have a peculiar

319

catalytic effect on xylose and xylotriose degradation, with the rate constants being 3- and 7-fold

320

greater than those of dilute H2SO4 at the same pH.78 Zhang et al.80 noted that an isomerization of

321

xylose for accelerating sugar dehydration and furfural production was promoted by metal

322

chlorides at 185°C and 100 min. The degradation rates of carbohydrates using inorganic salts were

323

faster than using dilute H2SO4 at the same pH.78 Thus, this phenomenon suggests that the

324

inorganic salts contributed to more efficient carbohydrate dehydration into the furfural compound,

325

which is desirable in the context of using the furfural compound in the fields of chemical industry

326

and liquid fuel production. ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 14 of 48

14 327

 REACTION MECHANISM FOR INORGANIC SALT PRETREATMENT

328

Although some studies have reported on the effects of inorganic salts on lignocellulosic

329

biomass pretreatment, little is known about the reaction mechanism involved. To date, several

330

mechanisms have been proposed to explain the behavior of inorganic salts. First, metal salts act as

331

Lewis acid by dissolving in aqueous solvents to produce complex cations. A Lewis acid can be

332

defined as a molecular body that serves as an electron pair acceptor that can react with a Lewis

333

base to form a Lewis adduct.71 Accordingly, coordinate covalent bonds with six water molecules

334

as monodentate ligands are formed around the central metal cation. Leshkov and Davis81 proposed

335

the general expression of these metal ion ligand complexes as [M(H2O)n]z+ (where M is the metal

336

ion, z is the cation oxidation state, and n is the solvation number, typically ranging between 4 and

337

9). Hence, metal chlorides such as Al3+ and Fe3+ are presumed to follow this reaction mechanism

338

to form six coordinate covalent bonds with water molecules, whereas Cu2+ achieves a stable

339

complex ion by coordinating as a tetradentate ligand.26,36

340

The formation of the metal cations ultimately acting as Lewis acids would then aid in the

341

cleavage of the glycosidic linkages. The coordinated water molecules from the hydrated cation

342

play a pivotal role in xylose formation by participating as nucleophiles.82,83 Similarly, the

343

conversion of cellulose to glucose mediated by ZnCl2 has also been examined to understand the

344

mechanism of formation of inorganic salts as Lewis acids. First, the zinc was found to coordinate

345

to the glycosidic oxygen to help break down the glycosidic linkage, resulting in the reduction of

346

reaction energy. Then, in the second step of the mechanism, the coordinated water molecules of

347

the metal cation complex participated as nucleophiles to yield D-glucose, as shown in Figure 8.84

348

The same Lewis acid mechanism pathway can be observed for AlCl3 83 and FeCl3 salts.85

349 350

Second, metal ions can undergo hydrolysis when they are mixed with water to produce H3O+ ion. The hydrolysis reactions are represented by Equations (2) and (3).86

351

[M(H2O)6]2+ + H2O

[M(H2O)5OH]+ + H3O+

Equation (2)

352

[M(H2O)6]3+ + H2O

[M(H2O)5OH]2+ + H3O+

Equation (3)

353

where M is the metal ion. ACS Paragon Plus Environment

Page 15 of 48

Journal of Agricultural and Food Chemistry

15 354

Therefore, the aqueous metal salt solutions present a Brønsted acid character similar to

355

HCl to depolymerize hemicelluloses into monosaccharides,38,85 as shown in Figure 9.26

356

Interestingly, FeSO4 was proposed to facilitate the breakdown of the glycosidic linkage due to the

357

adsorption of Fe2+ to the hydroxyl oxygen atoms and the oxygen of the cellulose pyran ring to

358

form a carbohydrate complex.22 In the dilute acid pretreatment, each proton pairs with one

359

electron to weaken the bond energy for easier bond rupture. Thus, Zhao et al.22 suggested that

360

metal ions could be playing the same role and may possibly be even more effective in assisting

361

bond rupture because they have more positive charges to pair with more electrons.

362

However, the capability of metal salts to accept electrons and the different ionic radii of

363

metal ions contribute to the varying stabilities of the carbohydrate complexes.32 The effect of the

364

inorganic salts on the decomposition of hemicellulose seems to follow this particular order:

365

Transition metal chlorides (FeCl2, FeCl3, CuCl2, ZnCl2) > alkaline earth metal chlorides (MgCl2,

366

CaCl2) > alkaline metal chlorides (KCl, NaCl). Transition metal ions such as Fe3+ and Fe2+ make

367

good electron acceptors compared with the alkaline metal ions, namely K+ and Na+,32 because

368

transition metal ions are able to coordinate with the oxygen donor atoms of carbohydrates and

369

their derivatives without losing the protons that make up the hydroxyl groups of the ligand.36

370

Alkaline metal cations are weak electron acceptors and are unable to coordinate with

371

carbohydrates, thus providing an explanation for the relatively low sugar recovery compared with

372

the sugar recovery observed for transition and alkaline earth metals. Hence, the dissimilar

373

arrangements of extranuclear electrons in the metal elements and the saccharide-metal cation

374

intermediate complex between inorganic salts result in contrasting performance in hemicellulose

375

hydrolysis.36 According to Marcotullio et al.,38 FeCl3 produced filtrates with the pH lower than the

376

HCl pretreatment (1.73–1.81 and 2.25–2.46, respectively). The results concur with those of Liu et

377

al.,27 where the pH after FeCl3 pretreatment reached as low as 1.68. Pretreatment with other

378

inorganic salts, namely NaCl, KCl, CaCl2, and MgCl2, produced filtrates with pH close to 7.

379

When the pH approached neutral, hemicelluloses were mainly solubilized as oligomers, despite

380

the lesser degradation of the hemicelluloses into toxic inhibitors.22 With respect to the findings of ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 16 of 48

16 381

Kang et al., the effect of a trivalent salt was reported to be greater than the effect of a di- or

382

monovalent salt during biomass hydrolysis.31 For example, FeCl3 generated 71.6% enzymatic

383

digestibility and almost 100% xylan removal from biomass, which were at least 26.7% and 31.8%

384

higher than di- and monovalent metal salts, respectively.31 Hence, Fe3+ apparently formed a

385

stronger acid in aqueous solution than did other cations because of its pKa (acid dissociation

386

constant) value of 2.46, which was significantly lower than Al3+ (4.85), Cu2+ (6.50), Fe2+ (9.49),

387

Mg2+ (11.4), Ca2+ (12.7), and Na+ (14.1).26

388 389

 PROSPECTS AND CHALLENGES OF THE INORGANIC SALT PRETREATMENT

390

Reduction in Operational Cost. Generally, inorganic salts have several advantages over

391

the “current technology” of lignocellulosic biomass pretreatment, such as dilute acid hydrolysis.

392

The dilute acid hydrolysis pretreatment method has been known to cause corrosion issues and

393

requires expensive materials for equipment construction.22 Corrosion occurs easily because

394

inorganic acids such as H2SO4, which is commonly used in dilute acid hydrolysis, produces a

395

strong electrolyte during the pretreatment process. An inorganic salt is less corrosive than an

396

inorganic acid35 because the former undergoes hydrolysis to release hydrogen ions as a weak

397

electrolyte to provide a steadier reactive environment.32 Moreover, Liu et al.27 discovered that

398

certain inorganic salts (NaCl, KCl, MgCl2, CaCl2) generated a hydrolysate with a pH that was

399

more suitable for downstream fermentation. The need for high neutralization requirements may

400

therefore be eliminated. However, stronger inorganic salts such as FeCl3 and Fe2(SO4)3

401

demonstrated higher xylose recovery, despite a low pH of ~2.0 that may require additional

402

neutralization.27 The inorganic salts can be recovered in the form of metal hydroxides via

403

ultrafiltration, and the treatment with conjugated acids is able to convert the metal hydroxides

404

back to metal chlorides, which could be recycled and reused in the later part of the biomass

405

pretreatment process.26

406

Associated Limitations. However, some concerns arise regarding the use of inorganic

407

salts for lignocellulosic biomass pretreatment. In particular, the effect of different inorganic salts ACS Paragon Plus Environment

Page 17 of 48

Journal of Agricultural and Food Chemistry

17 408

on the cellulase hydrolysis is not well understood.71 For instance, excessive Fe and Cl proportions

409

left in the solid fraction might affect the microorganisms or enzymes during bioconversion at the

410

later stage.38 In a study to identify the inhibitory effects of metal ions, Fe3+ and Fe2+ were thought

411

to target cellulose and cause undesirable impacts on cellulolysis.87 Heavy metal elements such as

412

chromium even caused the denaturing and inactivation of cellulase, which led to the

413

unsatisfactory enzymatic hydrolysis of Cr3+ pretreated sugarcane bagasse.35 Kamireddy et al.26

414

reported contradictory results, in which the enzymatic hydrolysis was improved due to the

415

presence of metal complexes that formed lignin-metal complexes. This occurrence eliminated

416

lignin inhibition and granted access to more cellulose sites. This result may explain the huge

417

fluctuation of enzymatic hydrolysis yield, which ranged from 36.6 to 98.0%,28,33 as well as other

418

factors such as biomass characteristics, pretreatment severity, and enzymatic loadings. Kim et al.23

419

argued that FeCl3 could be removed via a washing/filtration process to a point where it was

420

undetected. A novel approach has been developed to generate electricity while removing Fe2+

421

from the liquid fraction by using a fuel cell system.88 Nevertheless, further investigations are

422

required to analyze the mechanism of inorganic salt pretreatments and the effects on downstream

423

applications caused by metal ions in the biomass residues and liquid hydrolysate.

424

Economic Feasibility. At present, the development of second-generation fuels and

425

chemicals from lignocellulosic biomass via a biochemical route may present greater cost

426

reduction potential than the thermochemical route because the latter involves extremely energy-

427

intensive processes. The biotechnological conversion of biomass to second-generation products

428

has not been intensively commercialized, though the subject has been studied for decades, mainly

429

due to the uncertainty of the techno-economic feasibility of large-scale production.46,66

430

Pretreatment of lignocellulosic biomass, which is necessary to achieve high sugar yields in

431

biotechnological operation, has been singled out as the most expensive step, as it represents

432

approximately 20% of the total cost of the whole process.65 Among the available pretreatment

433

technologies, those that employ chemicals currently offer better yields at lower costs, which are

434

essential for economic viability. As part of an initiative of the United States Department of ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 18 of 48

18 435

Agriculture, Eggeman and Elander performed a comprehensive economic analysis to evaluate

436

various biomass pretreatment methods (dilute acid, hot water, ARP, AFEX, and lime).89 They

437

concluded that low-cost pretreatment reactors were often counterbalanced by the higher costs

438

associated with catalysts/solvents and product recovery, which resulted in little difference in

439

economic performance among the pretreatments investigated. To date, no literature is available

440

regarding the economics of biomass pretreatment using inorganic salts. Generally, inorganic salts

441

such as FeCl3 and AlCl3 are expensive.90 Nonetheless, the application of inorganic salt has

442

showed promising opportunities for reduced costs because of its less corrosive nature, which

443

allow for the use of cheaper construction materials.35 Furthermore, a recent study conducted by

444

Liu et al.27 proved that inorganic salts could be used directly as an aqueous solution for biomass

445

pretreatment without an addition of acid, which reduced neutralization requirements. Additionally,

446

Marcotullio et al.38 successfully carried out pretreatment of biomass at mild temperatures and at

447

approximately atmospheric pressure using an inorganic salt. Hence, scale-up issues concerning

448

continuous biomass feeding at high pressures and material resistance could be avoided. Silva and

449

Chandel70 also stated that inorganic salts allowed simple process conditions that would reduce

450

operational costs and energy consumption. In conclusion, further research is necessary to

451

investigate the physicochemical changes and mechanisms involved during not only inorganic salt

452

pretreatment but also other lignocellulose pretreatment methods in general on a cellular scale.

453

With an advancement in the field of analytical chemistry, better optimization studies could be

454

performed to develop more cost-effective pretreatment technologies in the future.

455 456

 AUTHOR INFORMATION

457

Corresponding Author

458

*(T. Y. Wu) Tel : +60 3 55146258. Fax : +60 3 55146207.

459

Email : [email protected]; [email protected]

460 461 ACS Paragon Plus Environment

Page 19 of 48

Journal of Agricultural and Food Chemistry

19 462

Funding

463

The funding of this research is supported by the Ministry of Higher Education, Malaysia, under

464

Long Term Research Grant Scheme (LRGS/2013/UKM-UKM/PT/01). In addition, the authors

465

would like to thank Monash University, Malaysia, for providing Y.-L. Loow with a postgraduate

466

scholarship.

467 468

Notes

469

The authors declare no competing financial interest.

470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 20 of 48

20 489

 REFERENCES

490

(1) Zhang, K.; Chang, J.; Guan, Y.; Chen, H.; Yang, Y.; Jiang, J. Lignocellulosic Biomass

491 492 493

Gasification Technology in China. Renewable Energy. 2013, 49, 175-184. (2) Sarkar, N.; Ghosh, S.K.; Bannerjee, S.; Aikat, K. Bioethanol Production From Agricultural Wastes: An Overview. Renewable Energy. 2012, 37, 19-27.

494

(3) Kristiani, A.; Abimanyu, H.; Setiawan, A.H.; Sudiyarmanto; Aulia, F. Effect of Pretreatment

495

Process by Using Diluted Acid to Characteristic of Oil Palm’s Frond. Energy Procedia. 2013,

496

32, 183-189.

497 498

(4) Nguyen, Q.A.; Tucker, M.P.; Keller, F.A.; Eddy, F.P. Two-stage dilute-acid pretreatment of softwoods. Applied Biochemistry and Biotechnology. 2000, 84-86, 561-576.

499

(5) Saha, B.C.; Iten, L.B.; Cotta, M.A.; Wu, Y.V. Dilute acid pretreatment, enzymatic

500

saccharification, and fermentation of rice hulls to ethanol. Biotechnology Progress. 2005,

501

21(3), 816-822.

502

(6) Sassner, P.; Martensson, C.G.; Galbe, M.; Zacchi, G. Steam pretreatment of H2SO4-

503

impregnated Salix for the production of bioethanol. Bioresource Technology. 2008, 99(1),

504

137-145.

505 506

(7) Sun, Y.E.; Cheng J.J. Dilute acid pretreatment of rye straw and bermudagrass for ethanol production. Bioresource Technology. 2005, 96(14), 1599-1606.

507

(8) Chiesa, S.; Gnansounou, E. Use of Empty Fruit Bunches from the Oil Palm for Bioethanol

508

Production: A Thorough Comparison between Dilute Acid and Dilute Alkali Pretreatment.

509

Bioresource Technology. 2014, 159, 355-364.

510

(9) Ishiguro, M.; Endo, T.; Addition of Alkali to the Hydrothermal-mechanochemical Treatment

511

of Eucalyptus Enhances its Enzymatic Saccharification. Bioresource Technology. 2014, 153,

512

322-326.

513

(10)

Holtzapple, M.T.; Lundeen, J.E.; Sturgis, R.; Lewis, J.E.; Dale, B.E. Pretreatment of

514

lignocellulosic municipal solid-waste by ammonia fiber explosion (AFEX). Applied

515

Biochemistry and Biotechnology. 1992, 34(5), 5-21. ACS Paragon Plus Environment

Page 21 of 48

Journal of Agricultural and Food Chemistry

21 516 517 518

(11)

Kim, T.H.; Lee, Y.Y. Pretreatment and fractionation of corn stover by ammonia recycle

percolation process. Bioresource Technology. 2005, 96(18), 2007-2013. (12)

Mes-Hartree, M.; Dale, B.E.; Craig, W.K. Comparison of steam and ammonia

519

pretreatment for enzymatic hydrolysis of cellulose. Applied Microbiology and Biotechnology.

520

1988, 29(5), 462-468.

521

(13)

Boussarsar, H.; Roge, B.; Mathlouthi, M. Optimization of sugarcane bagasse conversion

522

by hydrothermal treatment for the recovery of xylose. Bioresource Technology. 2009, 100,

523

6537-6542.

524

(14)

Carvalheiro, F.; Silva-Fernandes, T.; Duarte, L.C.; Girio F.M. Wheat straw autohydrolysis:

525

Process optimization and products characterization. Applied Biochemistry and Biotechnology.

526

2009, 153, 84-93.

527

(15)

Cara, C.; Ruiz, E.; Carvalheiro, F.; Moura, P.; Ballesteros, I.; Castro, E.; Girio, F.

528

Production, Purification and Characterization of Oligosaccharides from Olive Tree Pruning

529

Autohydrolysis. Industrial Crops and Products. 2012, 40, 225-231.

530

(16)

Singh, J.; Suhag, M.; Dhaka, A., Augmented Digestion of Lignocellulose by Steam

531

Explosion, Acid and Alkaline Pretreatment Methods: A Review. Carbohydrate Polymers.

532

2015, 117, 624-631.

533

(17)

Theuretzbacher, F.; Lizasoain, J.; Lefever, C.; Saylor, M.K.; Enguidanos, R.; Weran, N.;

534

Gronauer, A.; Bauer, A. Steam explosion pretreatment of wheat straw to improve methane

535

yields: Investigation of the degradation kinetics of structural compounds during anaerobic

536

digestion. Bioresource Technology. 2015, 179, 299-305.

537 538 539

(18)

Tan, H.T.; Lee, K.T. Understanding the Impact of Ionic Liquid Pretreatment on Biomass

and Enzymatic Hydrolysis. Chemical Engineering Journal. 2012, 183, 448-458. (19)

Limayem, A.; Ricke, S.C. Lignocellulosic Biomass for Bioethanol Production: Current

540

Perspectives, Potential Issues and Future Prospects. Progress in Energy and Combustion

541

Science. 2012, 38, 449-467.

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 22 of 48

22 542

(20)

Brodeur, G.; Yau, E.; Badal, K.; Collier, J.; Ramachandran, K.B.; Ramakrishnan, S.

543

Chemical and Physicochemical Pretreatment of Lignocellulosic Biomass: A Review. Enzyme

544

Research. 2011, 1-17.

545

(21)

Mosier, N.; Wyman, C.; Dale, B.; Elander, R.; Lee, Y.Y.; Holtzapple, M.; Ladisch, M.

546

Features of Promising Technologies for Pretreatment of Lignocellulosic Biomass. Bioresource

547

Technology. 2005, 96, 673-686.

548

(22)

Zhao, J.; Zhang, H.; Zheng, R.; Lin, Z.; Huang H. The Enhancement of Pretreatment and

549

Enzymatic Hydrolysis of Corn Stover by FeSO4 Pretreatment. Biochemical Engineering

550

Journal, 2011. 56, 158-164.

551

(23)

Kim, Y.; Yu, A.; Han, M.; Choi, G.W.; Chung, B.; Ethanosolv Pretreatment of Barley

552

Straw with Iron (III) Chloride for Enzymatic Saccharification. Journal of Chemical

553

Technology and Biotechnology. 2010, 85, 1494-1498.

554

(24)

Park, N.; Kim, H.Y.; Koo, B.W.; Yeo, H.; Choi, I.G. Organosolv Pretreatment with

555

Various Catalysts for Enhancing Enzymatic Hydrolysis of Pitch Pine (Pinus rigida).

556

Bioresource Technology. 2010, 101, 7046-7053.

557

(25)

Lu, J.; Zhou, P. Optimization of Microwave-assisted FeCl3 Pretreatment Conditions of

558

Rice Straw and Utilization of Trichoderma viride and Bacillus pumilus for Production of

559

Reducing Sugars. Bioresource Technology. 2011, 102, 6966-6971.

560

(26)

Kamireddy, S.R.; Li, J.; Tucker, M.; Degenstein, J.; Ji, Y.; Effects and Mechanism of

561

Metal Chlorides on Pretreatment and Enzymatic Digestibility of Corn Stover. Industrial &

562

Engineering Chemistry Research. 2013, 52, 1775-1782.

563

(27)

Liu, L.; Sun, J.; Cai, C.; Wang, S.; Pei, H.; Zhang, J. Corn Stover Pretreatment by

564

Inorganic Salts and its Effects on Hemicellulose and Cellulose Degradation. Bioresource

565

Technology. 2009, 100, 5865-5871.

566

(28)

Liu, L.; Sun, J.; Li, M.; Wang, S.; Pei, H.; Zhang, J. Enhanced Enzymatic Hydrolysis and

567

Structural features of Corn Stover by FeCl3 Pretreatment. Bioresource Technology. 2009, 100,

568

5853-5858. ACS Paragon Plus Environment

Page 23 of 48

Journal of Agricultural and Food Chemistry

23 569

(29)

Sun, Y.; Lu, X.; Zhang, R.; Wang, X. Pretreatment of Corn Stover Silage with Fe(NO3)3

570

for Fermentable Sugar Production. Applied Biochemistry and Biotechnology. 2011, 164, 918-

571

928.

572

(30)

Sun, Y.; Lu, X.; Zhang, S.; Zhang, R.; Wang, X. Kinetic Study for Fe(NO3)3 Catalyzed

573

Hemicellulose Hydrolysis of Different Corn Stover Silages. Bioresource Technology. 2011,

574

102, 2936-2942.

575 576 577 578 579

(31)

Kang, K.E.; Park, D.H.; Jeong, G.T. Effects of NH4Cl and MgCl2 on Pretreatment and

Xylan Hydrolysis of Miscanthus Straw. Carbohydrate Polymers. 2013, 92, 1321-1326. (32)

Kang, K.E.; Park, D.H.; Jeong, G.T. Effects of Inorganic Salts on Pretreatment of

Miscanthus Straw. Carbohydrate Polymers. 2013, 132, 160-165. (33)

Linares, J.C.L.; Romero, I.; Moya, M.; Cara, C.; Ruis, E. Pretreatment of Olive tree

580

Biomass with FeCl3 Prior Enzymatic Hydrolysis. Bioresource Technology. 2013, 128, 180-

581

187.

582

(34)

Monavari, S.; Galbe, M.; Zacchi, G. The Influence of Ferrous Sulfate Utilization on the

583

Sugar Yields from Dilute-acid Pretreatment of Softwood for Bioethanol Production.

584

Bioresource Technology. 2011, 102, 1103-1108.

585 586 587

(35)

Chen, L.; Chen, R.; Fu, S. Preliminary Exploration on Pretreatment with Metal Chlorides

and Enzymatic Hydrolysis of Bagasse. Biomass and Bioenergy. 2014, 71, 311-317. (36)

Yu, Q.; Zhaung, X.; Yuan, Z.; Qi, W.; Wang, Q.; Tan, X. The Effect of Metal Salts on the

588

Decomposition of Sweet Sorghum Bagasse in Flow-Through Liquid Hot Water. Bioresource

589

Technology. 2011, 102, 3445-3450.

590

(37)

Zhang, B.; Shahbaz, A.; Wang, L.; Whitmore, A.; Riddick, B.A. Fermentation of Glucose

591

and Xylose in Cattail Processed by Different Pretreatment Technologies. BioResources. 2012,

592

7(3), 2848-2859.

593 594

(38)

Marcotullio, G.; Krisanti, E.; Giuntoli, J.; Jong, W.D. Selective Production of

Hemicellulose-derived Carbohydrates from Wheat Straw using Dilute HCl or FeCl3 Solutions

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 24 of 48

24 595

under Mild Conditions. X-ray and Thermo-gravimetric Analysis of the Solid Residues.

596

Bioresource Technology. 2011, 102, 5917-5923.

597 598 599 600 601

(39)

Nguyen, Q.A.; Tucker, M.P. Dilute Acid/Metal Salt Hydrolysis of Lignocellulosics. US

Patent 6,423,145 B1, 2002, 1-12. (40)

Hadar ,Y. Sources For Lignocellulosic Raw Materials for The Production of Ethanol, In

Lignocellulose Conversion, Faraco, V., ed.; Springer, Berlin Heidelberg, 2013, 21-38. (41)

Kurian, J.K.; Nair, G.R.; Hussain, A.; Raghavan, G.S.V. Feedstocks, Logistics and Pre-

602

treatment Processes For Sustainable Lignocellulosic Biorefineries: A Comprehensive Review.

603

Renewable and Sustainable Energy Reviews. 2013, 25, 205-219.

604 605 606 607 608

(42)

Ho, D.P.; Ngo, H.H.; Guo, W.; A mini review on renewable sources for biofuel.

Bioresource Technology. 2014, 169, 724-749. (43)

Maity, S.K. Opportunities, recent trends and challenges of integrated biorefinery: Part I.

Renewable and Sustainable Energy Reviews. 2015, 43, 1427-1445. (44)

Muller, A.; Schmidhuber, J.; Hoogeveen, J.; Steduto, P. Some insights in the effect of

609

growing bio energy demand on global food security and natural resources. Water Policy.

610

2008, 10, 83-94.

611 612 613

(45)

Food and Agriculture Organization of the United Nations (FAO). FAOSTAT. Production:

Crops. http://faostat.fao.org/site/567/desktopdefault.aspx#ancor (Accessed: 8th April 2015). (46)

Menon, V.; Rao, M. Trends In Bioconversion of Lignocellulose: Biofuels, Platform

614

Chemicals and Biorefinery Concept. Progress in Energy and Combustion Science. 2012, 38,

615

522-550.

616 617 618 619

(47)

Bazargan, A.; Bazargan, M.; Mckay, G. Optimization of rice husk pretreatment for energy

production. Renewable Energy. 2015, 77, 512-520. (48)

Ji, L. An assessment of agricultural residue resources for liquid biofuel production in

China. Renewable and Sustainable Energy Reviews. 2015, 44, 561-575.

ACS Paragon Plus Environment

Page 25 of 48

Journal of Agricultural and Food Chemistry

25 620

(49)

Rocha, G.J.M.; Nascimento, V.M.; Goncalves, A.R.; Silva, V.F.N.; Martin, C. Influence of

621

mixed sugarcane bagasse samples evaluated by elemental and physical-chemical composition.

622

Industrial Crops and Products. 2015, 64, 52-58.

623 624 625

(50)

Lim, S.L.; Wu, T.Y.; Sim, E.Y.S.; Lim, P.N.; Clarke, C. Biotransformation of rice husk

into organic fertilizer through vermicomposting. Ecological Engineering. 2012, 41, 60-64. (51)

Shak, K.P.Y.; Wu, T.Y.; Lim, S.L.; Lee, C.A. Sustainable reuse of rice residues as

626

feedstocks in vermicomposting for organic fertilizer production. Environmental Science and

627

Pollution Research. 2014, 21(2), 1349-1359.

628 629 630

(52)

Puri, M.; Abraham, R.E.; Barrow, C.J.; Biofuel Production: Prospects, Challenges and

Feedstock in Australia. Renewable and Sustainable Energy Reviews. 2012, 16, 6022-6031. (53)

Mushtaq, Z.; Imran, M.; Rehman, S.; Zahoor, T.; Ahmad, R.S.; Arshad, U. Biochemical

631

perspectives of xylitol extracted from indigenous agricultural by-product mung bean (vigna

632

radiata) hulls in a rat model. Journal of the Science of Food and Agriculture. 2014, 94, 969-

633

974.

634

(54)

Gupta, V.K.; Potumarthi, R.; O’Donovan, A.; Kubicek, C.P.; Sharma, G.D.; Tuohy, M.G.

635

Chapter 2 – Bioenergy research: An overview on technological developments and

636

bioresources. In Bioenergy Research: Advances and Applications, Gupta, V.K., Tuohy, M.G.,

637

Kubicek, C.P., Saddler, J., Xu, F., Eds.; Elsevier, Amsterdam, 2014, 23–47.

638

(55)

Garcia, S.G.; Yudego, B.M.; Murphy, R.J.; Life cycle assessment of potential energy uses

639

for short rotation willow biomass in Sweden. The International Journal of Life Cycle

640

Assessment. 2013, 18, 783-795.

641 642 643

(56)

Manavalan, T.; Manavalan, A.; Heese, K. Characterization of Lignocellulolytic Enzymes

from White-Rot Fungi. Current Microbiology. 2014, DOI: 10.1007/s00284-014-0743-0. (57)

Li, X.P.; Clarke, K.; Li, K.C.; Chen, A.C. The Pattern of Cell Wall Deterioration in

644

Lignocellulose Fibres Throughout Enzymatic Cellulose Hydrolysis. Biotechnology Progress.

645

2012, 28(6), 1389-1399.

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 26 of 48

26 646

(58)

Zeng, Y.; Zhao, S.; Yang, S.; Ding, S.; Lignin plays a negative role in the biochemical

647

process for producing lignocellulosic biofuels. Current Opinion in Biotechnology. 2014, 27,

648

38-45

649

(59)

Kotarska, K.; Swierczynska, A.; Dziemianowicz, W. Study on the decomposition of

650

lignocellulosic biomass and subjecting it to alcoholic fermentation: Study on the

651

decomposition of lignocellulosic biomass. Renewable Energy. 2014, 75, 389-394.

652

(60)

Davison, B.H.; Parks, J.; Davis, M.F.; Donohoe, B.S. Plant Cell Walls: Basics of

653

Structure, Chemistry, Accessibility and the Influence on Conversion. In Aqueous Pretreatment

654

of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals, 1;

655

Wyman, C.E., Ed.; John Wiley & Sons, Ltd, 2013, 23-38.

656

(61)

Pang, C.H.; Gaddipatti, S.; Tucker, G.; Lester, E.; Wu T. Relationship between thermal I

657

of lignocellulosic components and properties of biomass. Bioresource Technology. 2014, 172,

658

312-320.

659

(62)

Rocha, G.J.; Nascimento, V.M.; Goncalves, A.R.; Silva, V.F.N.; Martin, C. Influence of

660

mixed

661

composition. Industrial Crops and Products. 2014, 64, 52-58.

662

(63)

sugarcane

bagasse

samples

evaluated

by elemental and physical–chemical

Szczerbowski, D.; Pitarelo, A.P.; Filho, A.Z.; Ramos, L.P. Sugarcane

663

biorefineries:

664

components of bagasse and straw. Carbohydrate Polymers. 2014, 114, 95-101.

665

(64)

Comparative

composition

of carbohydrate

and

biomass

for

non-carbohydrate

Harmsen, P.F.H.; Hujigen, W.J.J.; Lopez, L.M.B.; Bakker, R.R.C. Literature Review of

666

Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass. Energy Research

667

Centre of the Netherlands. 2010, 10-013.

668 669 670 671

(65)

Yang, B.; Wyman, C.E. Pretreatment: The Key to Unlocking Low-cost cellulosic ethanol.

Biofuels, Bioproducts and Biorefining. 2007, 2, 26-40. (66)

Singhvi, M.S.; Chaudhari, S.; Gokhale, D.V. Lignocellulose processing: A current

challenge. Royal Science of Chemistry. 2014, 4, 8271-8277.

ACS Paragon Plus Environment

Page 27 of 48

Journal of Agricultural and Food Chemistry

27 672

(67)

He, Y.; Zhang, J.; Bao, J. Dry dilute acid pretreatment by co-currently feeding of corn

673

stover feedstock and dilute acid solution without impregnation. Bioresource Technology.

674

2014, 158, 360-364.

675 676 677 678 679

(68)

Tabasso, S.; Carnaroglio, D.; Gaudino, E.C.; Cravotto, G. Microwave, Ultrasound and Ball

Mill Procedures for Bio-waste Valorisation. Green Chemistry. 2015, 17, 684-693. (69)

Wu, T.Y.; Guo, N.; Teh, C.Y.; Hay, J.X.W.; Advances in Ultrasound Technology for

Environmental Remediation; Springer, Netherlands, 2013, DOI: 10.1007/978-94-007-5533-8 (70)

Silva, S.S.; Chandel, A.K.; Part I: Biomass Hydrolysis for Xylose Recovery and

680

Detoxification. In D-Xylitol: Fermentative Production, Application and Commercialization.

681

Silva, S.S., Chandel A.K., Eds.; Springer Heidelberg, New York, 2012, 3-37.

682

(71)

Zhang, B.; Shahbazi A. Recent Developments in Pretreatment Technologies for

683

Production of Lignocellulosic Biofuels. Journal of Petroleum and Environmental

684

Biotechnology. 2011, 2(2), 1-8.

685 686 687

(72)

Morikawa, Y.; Zhao, X.; Liu, D. Biological Co-production of Ethanol and Biodiesel from

Wheat Straw: A Case of Dilute Acid Pretreatment. RSC Advances. 2014, 4, 37878-37888. (73)

Goldstein, I.S. Acid Processes for Cellulose Hydrolysis and Their Mechanisms Wood and

688

Agricultural Residues. In Wood Agricultural Residues: Research on Use for Feed, Fuels, and

689

Chemicals. Soltes, E.J., Ed.; Academic Press Inc: New York., 1983, 315-328.

690

(74)

Agbor, V.B.; Cicek, N.; Sparling, R.; Berlin, A.; Levin, D.B. Biomass Pretreatment:

691

Fundamentals toward Application, Biotechnology Toward Application. Biotechnology

692

Advances. 2011, 29, 675-685.

693

(75)

Zheng, Y.; Pan, Z.; Zhang, R. Overview of Biomass Pretreatment for Cellulosic Ethanol

694

Production. International Journal of Agricultural and Biological Engineering. 2009, 2(3), 51-

695

68.

696

(76)

Fields, P.; Wilson, R. Process for the Production of Xylose, US Patent 5, 1994, 340-403.

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 28 of 48

28 697

(77)

Pappas, I.A.; Koukoura, Z.; Tananaki, C.; Goulas, C. Effect of Dilute Acid Pretreatment

698

Severity on the Bioconversion Efficiency of Phalaris aquatica L. Lignocellulosic Biomass into

699

Fermentable Sugars. Bioresource Technology. 2014, 166, 395-402.

700

(78)

Liu, C.; Wyman, C.E. The Enhancement of Xylose Monomer and Xylotriose Degradation

701

by Inorganic Salts in Aqueous Solutions at 180oC. Carbohydrate Research. 2006, 341, 2550-

702

2556.

703 704 705

(79)

Marcotullio, G.; Jong, W.D. Chloride Ions Enhance Furfural Formation from D-xylose in

Dilute Aqueous Acidic Solutions. Green Chemistry. 2010, 12, 1739-1746. (80)

Zhang, L.; Yu, H.; Wang, P.; Dong, H.; Peng, X. Conversion of Xylan, D-xylose and

706

Lignocellulosic Biomass into Furfural using AlCl3 as Catalyst in Ionic Liquid. Bioresource

707

Technology. 2013, 130, 110-116.

708 709 710 711 712 713 714 715 716

(81)

Leshkov, Y.R.; Davis, M.E. Activation of Carbonyl Containing Molecules with Solid

Lewis Acids in Aqueous Media. ACS Catalysis, 2011. 1(11), 1566-1580. (82)

Cotton, F.; Wilkinson, G. In Advanced Inorganic Chemistry, 5, Wiley & Sons New York:

Hoboken, NJ, 1988. (83)

Peng, L.; Lin, L.; Zhang, J.; Zhuang, J.; Zhang, B.; Gong, Y. Catalytic Conversion of

Cellulose to Levulinic Acid by Metal Chlorides. Molecules. 2010, 15, 5258-5272. (84)

Amarasekara, A.S.; Ebede, C.C. Zinc Chloride Mediated Degradation of Cellulose at

200oC and Identification of the Products. Bioresource Technology. 2009, 100, 5301-5304. (85)

Zhang, L.; Yu, H.; Wang, P.; Li, Y. Production of Furfural from Xylose, Xylan and

717

Corncob in Gamma-Valerolactone using FeCl3.6H2O as Catalyst. Bioresource Technology.

718

2014, 151, 355-360.

719 720 721

(86)

Scienceaid.co.uk,

Lewis

Acids

and

Bases.

http://scienceaid.co.uk/chemistry/inorganic/lewis.html (Accessed: 24th December 2014). (87)

Tejirian, A.; Xu, F.; Inhibition of Cellulase-Catalyzed Lignoceluulosic Hydrolysis by Iron

722

and Oxidative Metal Ions and Complexes. Applied and Environmental Microbiology. 2010,

723

76(23), 7673-7682. ACS Paragon Plus Environment

Page 29 of 48

Journal of Agricultural and Food Chemistry

29 724

(88)

Kim, I.; Rehman, M.S.U.; Kim, K.H.; Han, J.I. Generation of Electricity from FeCl3

725

Pretreatment of Rice Straw using a Fuel Cell System. Bioresource Technology. 2013, 135,

726

635-639.

727 728 729

(89)

Eggeman, T.; Elander, R.T. Process and Economic Analysis of Pretreatment Technologies.

Bioresource Technology. 2005, 96, 2019-2025. (90)

Degenstein, J.; Kamireddy, S.R.; Tucker, M.P.; Ji, Y. Oligomer Saccharide Reduction

730

during Dilute Acid Pretreatment Co-catalyzed with Lewis Acids on Corn Stover Biomass.

731

International Journal of Agricultural & Biological Engineering. 2013, 6(2), 54-62.

732 733

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 30 of 48

30 734

 LIST OF TABLES Table 1. Breakdown of worldwide major crops.44,45

735

Crop

Cassava

World production (tonnes) 2.77 × 108

Major Producing Country (tonnes) [% of world total production] Nigeria : 5.3 × 107 [19.1%]

Hemp

1.24 × 105

France : 4.93 × 104 [39.8%]

Maize

1.02 × 109

United States : 3.54 × 108 [34.7%]

Oil Palm

2.66 × 108

Indonesia: 1.2 × 108 [45.1%]

Rapeseed

7.27 × 107

Canada: 1.79 × 107 [24.6%]

Soybean

2.76 × 108

United States: 8.95 × 107 [32.4%]

Sugar Beet

2.46× 108

Russia: 3.93 × 107 [16.0%]

Sugarcane

1.91 × 109

Brazil: 7.68 × 108 [40.2%]

Sorghum

6.23 × 107

United States : 9.88 × 106 [15.9%]

736

737

738

739

740

741

ACS Paragon Plus Environment

Other Countries (tonnes) Thailand : 3.02 × 107 Indonesia : 2.39 × 107 Brazil : 2.15 × 107 China : 1.6 × 104 Korea : 1.4 × 104 Netherlands : 1.03 × 104 China : 2.19 × 108 Brazil : 8.03 × 107 Argentina : 3.21 × 107 Malaysia : 9.57 × 107 Thailand : 1.28 × 107 Nigeria : 8.00 × 106 China : 1.45 × 107 India : 7.82 × 106 Germany : 5.78 × 106 Brazil : 8.17 × 107 Argentina : 4.93 × 107 China : 1.20 × 107 France : 3.36 × 107 United States : 2.98 × 107 Germany : 2.28 × 107 India : 3.41 × 108 China : 1.29 × 108 Thailand : 1.00 × 108 Nigeria : 6.7 × 106 Mexico : 6.31 × 106 India : 5.28 × 106

Page 31 of 48

Journal of Agricultural and Food Chemistry

31

Table 2. Biomass yields of different energy crops.42

742

Energy Crop Willow

Establishment time (years) 3+

Dry matter biomass yield (ton/ha/year) 5-11

Poplar

3+

2-10

Eucalyptus

4+

10-12

Miscanthus

3+

5-43

Switchgrass

2-3

5-19

Reed Canary Grass

1-2

2-10

Alfalfa

1-2

1-17

Fibre sorghum

1-2

16-43

743

744

745

746

747

748

749

750

751

752

753

754

755

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 32 of 48

32 756

Table 3. Typical components and particle size of various lignocellulosic biomass,

757

mainly agricultural residues. Lignocellulosic Material Corn stover Corn stover Wheat Straw Rice Straw Switchgrass Poplar Wood

Particle Size (diameter) 0.279 mm N/A N/A N/A N/A N/A 500-1000 µm 212-300 µm

Miscanthus

500-1000 µm 212-300 µm 500-1000 µm 212-300 µm 500-1000 µm 212-300 µm 500-1000 µm 212-300 µm N/A

31.2 27.8 41.6 37.4 72.7 77.7 66.8 74.6 42.19

42.1 45.8 30.0 37.0 5.6 1.8 11.5 6.8 27.60

26.7 26.4 28.4 25.6 21.7 20.5 21.7 18.6 21.56

62

N/A

37.74

27.23

20.57

63

N/A

33.77

27.38

21.28

Straw Distiller Dried Grains Wheat Shorts Sugarcane Bagasse Sugarcane Bagasse Straw

Components of Lignocellulose (%) Cellulose Hemicellulose Lignin 37.99 22.45 18.39 36.4 22.6 16.6 38.2 24.7 23.4 34.2 24.5 11.9 31.0 24.4 17.6 49.9 25.1 18.1 13.9 57.9 28.1 9.1 65.2 25.7

758 759 760 761 762 763 764 765 766 767 768 769 770 ACS Paragon Plus Environment

References 59 60

61

Page 33 of 48

Journal of Agricultural and Food Chemistry

33

Table 4. Comparison of different biomass pretreatments.

771

Pretreatment Dilute acid hydrolysis

Advantages Obtain high yields of fermentable sugars

Concentrated Obtain high yields of acid hydrolysis fermentable sugars Autohydrolysis (Liquid hot water)

Produces less inhibitors, simple operation

Sodium hydroxide (NaOH)

Effectively removes lignin, low temperature and pressure operation, low inhibitor production Low enzyme demands during enzymatic hydrolysis, low inhibitor production

Ammonia fiber expansion (AFEX) Ammonia recycle percolation (ARP) Ionic liquid

Effectively removes lignin, low inhibitor production

Inorganic salt

Less corrosive, low enzyme demands

Steam Explosion

Low enzyme dosages demand, low energy demand. Environmentally friendly, low energy demand

Enzymatic hydrolysis

Effectively dissolves cellulose, minimal environmental impacts

Disadvantages Produces inhibitory by-products, corrosive, requires acid neutralization Sugar recovery rate is slow, highly corrosive, requires acid recovery system for feasibility High temperature operation, high energy and water input. Dissolved pentose appeared mainly in oligomeric form which required further post hydrolysis step to obtain monomeric sugar. Long pretreatment time, expensive chemical, complex recovery process

Reference 3-7, 72

71, 73

13-15, 20, 21

8, 9

Produces high amounts of oligomers which cannot be fermented by microorganism, safety and environmental issues of ammonia Can only handle low solid loadings

10, 21, 70

High costs of reagents, regeneration requirements, lack of knowledge regarding toxicity and causticity of reagent Little understanding of salt residues effect on downstream processing Formation of degradation product that inhibits subsequent hydrolysis and fermentation Inefficient without other pretreatment beforehand, slow process

18, 20, 71, 74, 75

ACS Paragon Plus Environment

11, 12, 20

35, 38, 71

16, 17

70

Journal of Agricultural and Food Chemistry

Page 34 of 48

34

Table 5. Performance of inorganic salts pretreatment for various biomass. Biomass Corn stover

Initial pretreatment FeSO4 T = 180oC Time = 20 min 10% (w/v) FeSO4

Subsequent pretreatment Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 20 FPU/g substrate T = 50oC, Time = 72 h

Barley straw

Organosolv + FeCl3 T = 170oC Time = 60 min L/S ratio = 7:1 (v/w) 0.1 mol/L FeCl3, 50% (w/w) ethanol Organosolv + MgCl2 T = 210oC Time = 10 min 0.1% (w/v) MgCl2, 50% (v/v) ethanol CuCl2 T = 160oC Time = 10 min 0.125 mol/L CuCl2

Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 20 FPU/g cellulose, β-glucosidase (Novozyme 188) 40 CBU/g cellulose T = 45oC, Time = 72 h

Pitch pine

Corn stover

FeCl3 T = 160oC Time = 10 min 0.125 mol/L FeCl3 Corn stover

FeCl3 T = 140oC

Key findings 1) Liquid fraction: 60.3% xylose recovery 2) Solid fraction: ~79% glucose recovery, ~86% enzymatic hydrolysis yield 1) Solid fraction: 90% cellulose recovery, 89% enzymatic digestibility 2) Liquid fraction: 0.011g/L HMF, 0.148g/L furfural

Enzymatic hydrolysis 1) Solid fraction: 75.8% glucose yield, Cellulase (Celluclast 1.5L) 700 EGU/g 61.2% enzymatic digestibility WIS, β-glucosidase (Novozymes NS50010) 250 CBU/g cellulose T = 50oC, Time = 72 h Enzymatic hydrolysis 1) Liquid fraction: 93% monomeric Cellulase (Accelerase 1500) xylose yield T = 50oC, Time = 72 h 2) Liquid fraction: 3.45 ± 0.34 g/L acetic acid, 0.42 ± 0.09 g/L HMF, 1.50 ± 0.33 g/L furfural Enzymatic hydrolysis 1) Liquid fraction: 94% monomeric Cellulase (Accelerase 1500) xylose yield T = 50oC, Time = 72 h 2) Liquid fraction: 3.30 ± 0.61 g/L acetic acid, 0.52 ± 0.08 g/L HMF, 1.19 ± 0.15 g/L furfural None 1) Liquid fraction: 89.0% xylose recovery

ACS Paragon Plus Environment

Reference 22

23

24

26

27

Page 35 of 48

Journal of Agricultural and Food Chemistry

35

Time = 20 min 0.1 mol/L FeCl3 Corn stover

FeCl3 T = 160oC Time = 20 min 0.1 mol/L FeCl3

Corn stover silage

Fe(NO3)3 T = 150oC Time = 10 min L/S ratio = 9:1 (w/w) 0.05 mol/L Fe(NO3)3

Corn stover silage

Fe(NO3)3 T = 150oC Time = 21.2 min L/S ratio = 9:1 (w/w) 0.05 mol/L Fe(NO3)3 Miscanthus NH4Cl straw T = 185oC Time = 15 min L/S ratio = 10:1 2% NH4Cl

Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 60 FPU/g glucan, β-glucosidase (Novozyme 188) T = 50oC, Time = 72 h None

None

Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 30 FPU/g cellulose, β-glucosidase (Novozyme 188) 30 CBU/g cellulose T = 50oC, Time = 72 h

MgCl2 T = 185oC Time = 15 min L/S ratio = 10:1 2% MgCl2

Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 30 FPU/g cellulose, β-glucosidase (Novozyme 188) 30 CBU/g cellulose T = 50oC, Time = 72 h

Miscanthus FeCl3 straw T = 200oC Time = 15 min L/S ratio = 10:1

Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 30 FPU/g cellulose, β-glucosidase (Novozyme 188) 30 CBU/g cellulose

ACS Paragon Plus Environment

2) Solid fraction: ~90% glucose recovery 1) Solid fraction: 93.0% glucose recovery, 98.0% enzymatic hydrolysis yield

28

1) Liquid fraction: 91.80% xylose recovery, 19.09% glucose recovery, 96.74% arabinose recovery 2) Liquid fraction: 0.03g/L total inhibitor concentration 1) Liquid fraction: 81.66% xylose recovery 2) Liquid fraction: 0.5g/L furfural concentration

29

1) Liquid fraction: 90.2% xylan recovery 2) Solid fraction: 94.4% glucan recovery, 39.7% enzymatic digestibility 1) Liquid fraction: 94.6% xylan recovery 2) Solid fraction: 95.0% glucan recovery, 29.9% enzymatic digestibility 1) Solid fraction: 60.1% glucan recovery, 71.6% enzymatic digestibility

31

30

32

Journal of Agricultural and Food Chemistry

Page 36 of 48

36

Olive tree biomass (OTB)

Softwood chips

Sugarcane bagasse

0.5% FeCl3 FeCl3 T = 153oC Time = 30 min L/S ratio = 5:1 (v/w) 0.26 mol/L FeCl3

T = 50oC, Time = 72 h Enzymatic hydrolysis Cellulase (Celluclast 1.5L) 45 FPU/g WIS, β-glucosidase (Novozyme 188) 15 CBU/g cellulose T = 50oC, Time = 48 h

SO2 + FeSO4 T = 200oC Time = 5 min 0.5 mmol/L FeSO4 H2SO3 + FeSO4 T = 200oC Time = 5 min 0.5 mmol/L FeSO4 FeCl3 T = 170oC Time = 30 min L/S ratio = 10:1 (v/w) 0.1 mol/L FeCl3 CrCl3 T = 170oC Time = 30 min L/S ratio = 10:1 (v/w) 0.1 mol/L CrCl3 AlCl3 T = 170oC Time = 30 min L/S ratio = 10:1 (v/w) 0.1 mol/L AlCl3 FeCl2 T = 170oC Time = 30 min

1) Liquid fraction: 63.2% total hemicellulosic sugars recovery 2) Solid fraction: 36.6% enzymatic hydrolysis yield

33

Enzymatic hydrolysis Cellulase 15 FPU/g WIS, βglucosidase 18 IU/g WIS T = 40oC, Time = 96 h Enzymatic hydrolysis Cellulase 15 FPU/g WIS, βglucosidase 18 IU/g WIS. T = 40oC, Time = 96 h None

1) Solid fraction: 69.1% overall sugar yield

34

None

1) Liquid fraction: ~60% xylose recovery, ~20% glucose recovery 2) Liquid fraction: 1.88 ± 0.47 g/L furfural, 0.667 ± 0.003 g/L HMF

None

1) Liquid fraction: ~46% xylose recovery, ~2% glucose recovery 2) Liquid fraction: 1.70 ± 0.10 g/L furfural, 0.816 ± 0.058 g/L HMF

None

1) Liquid fraction: ~35% xylose recovery 2) Liquid fraction: 3.72 ± 0.10 g/L

ACS Paragon Plus Environment

1) Solid fraction: 67.7% overall sugar yield 1) Liquid fraction: ~52% xylose recovery, ~16% glucose recovery 2) Liquid fraction: 5.11 ± 0.15 g/L furfural, 0.752 ± 0.030 g/L HMF

35

Page 37 of 48

Journal of Agricultural and Food Chemistry

37

Sweet sorghum bagasse

L/S ratio = 10:1 (v/w) 0.1 mol/L FeCl2 ZnCl2 T = 170oC Time = 30 min L/S ratio = 10:1 (v/w) 0.1 mol/L ZnCl2 CuCl2 T = 184oC Time = 8 min (20 mL/min), 10 min (10 mL/min) 0.1% CuCl2

furfural, 0.268 ± 0.007 g/L HMF None

1) Liquid fraction: ~15% xylose recovery 2) Liquid fraction: 0.870 ± 0.002 g/L furfural, 0.069 ± 0.022 g/L HMF

Enzymatic hydrolysis Cellulase (Imperial Jade Biotechnology) 40 FPU/g dry solid T = 50oC, Time = 48 h

1) Liquid fraction: 2.5% glucan recovery, 19.7% xylan recovery 2) Solid fraction: 42.0% glucan recovery, 2.7% xylan recovery, ~86.0% enzymatic digestibility 1) Liquid fraction: 90% xylose recovery 2) Solid fraction: 61.7% glucose recovery 1) Liquid fraction: 22.9% xylose (20.6% monomeric), 2.6% glucose, 3.1% arabinose (d.b. initial wheat straw), 96.8% total pentose yield

Typha latifolia cattails

MgCl2 T = 180oC Time = 15 min 0.4 mol/L MgCl2

Enzymatic hydrolysis Cellulase 15 FPU/g glucan T = 37oC, Time = 48 h

Wheat straw

FeCl3 T = 120oC Time = 120 min L/S ratio = 5:1 (v/w) 0.2 mol/L FeCl3

None

ACS Paragon Plus Environment

36

37

38

Journal of Agricultural and Food Chemistry

Page 38 of 48

38

FIGURE CAPTIONS

Figure 1. Major sources of lignocellulosic biomass.40-43 Figure 2. Global production of potentially available lignocellulosic biomass, adapted from Kurian et al.41 Figure 3. Structure and chemical composition of lignocellulose residues.56 Figure 4. TEM images for SBKP (a) show the thin primary cell wall (P) and outermost layer (S1), middle layer (S2) and inner most layer (S3) of the thick secondary cell wall (S) and (b) displays the lamella separation, S1/P and S2.57 Figure 5. FE-SEM image of untreated SKBP (a) shows the microfibrils on the cell wall, (b) displays the exposed P wall layer, whereas (c) presents the exposed secondary cell wall layer (S).57 Figure 6. Scanning electron micrograph of (a) untreated and (b) Fe(NO3)3-pretreated corn stover silage at x1000 magnification.29 Figure 7. Scanning electron micrograph of (a) untreated, (b) NH4Cl-pretreated, and (c) MgCl2-pretreated miscanthus straw at x1000 magnification.31 Figure 8. Conversion of cellulose into glucose via the Lewis acid mechanism.84 Figure 9. Conversion of xylan into xylose via the Brønsted acid mechanism.26

ACS Paragon Plus Environment

Page 39 of 48

Journal of Agricultural and Food Chemistry

39

Major Sources of Lignocellulosic Biomass

Annual and Perennial Dry Energy Grasses (US$ 100-120/ton)

Forestry Waste Feedstock (US$ 60-80/ton)

Examples i. Switchgrass ii. Miscanthus iii. Canary Grass iv. Giant Reed v. Napier Grass

Examples i. Saw mill ii. Paper mill iii. Wood chips iv. Poplar

Figure 1

ACS Paragon Plus Environment

Agricultural Waste (US$ 60-80/ton)

Examples i. Corn Stover ii. Sugarcane Bagasse iii. Rice Straw/Husk iv. Wheat Straw

Journal of Agricultural and Food Chemistry

Page 40 of 48

40

Wheat Straw 24% Rice Straw 25% Corn stover 32% Forest wood residues 6% Sorghum stover 2%

Figure 2

ACS Paragon Plus Environment

Sugarcane bagasse 11%

Page 41 of 48

Journal of Agricultural and Food Chemistry

41

Figure 3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 42 of 48

42

Figure 4

ACS Paragon Plus Environment

Page 43 of 48

Journal of Agricultural and Food Chemistry

43

Figure 5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 44 of 48

44

Figure 6

ACS Paragon Plus Environment

Page 45 of 48

Journal of Agricultural and Food Chemistry

45

Figure 7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 46 of 48

46

Figure 8

ACS Paragon Plus Environment

Page 47 of 48

Journal of Agricultural and Food Chemistry

47

Figure 9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

 FOR TABLE OF CONTENTS ONLY

ACS Paragon Plus Environment

Page 48 of 48