Removal of Pharmaceuticals and Illicit Drugs from Wastewater Due to

May 9, 2019 - School of Civil, Mining and Environmental Engineering, University of ..... following the three heavy-burst model to obtain the carbon th...
0 downloads 0 Views 682KB Size
Subscriber access provided by UNIV OF LOUISIANA

Environmental Processes

Removal of pharmaceuticals and illicit drugs from wastewater due to ferric dosing in sewers Jagadeeshkumar Kulandaivelu, Jianfa Gao, Yarong Song, Sohan Shrestha, Xuan Li, Jiaying Li, Katrin Doederer, Jürg Keller, Zhiguo Yuan, Jochen F. Mueller, and Guangming Jiang Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.8b07155 • Publication Date (Web): 09 May 2019 Downloaded from http://pubs.acs.org on May 9, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 36

Environmental Science & Technology

1

Removal of pharmaceuticals and illicit drugs from

2

wastewater due to ferric dosing in sewers

3

Jagadeeshkumar Kulandaivelu1, Jianfa Gao2, Yarong Song1, Sohan Shrestha1, Xuan Li1, Jiaying

4

Li1, Katrin Doederer1, Jurg Keller1, Zhiguo Yuan1, Jochen F. Mueller2, Guangming Jiang1,3,4, *

5

1

6

Australia

7

2

8

Woollongabba, Queensland 4072, Australia

9

3

Advanced Water Management Centre, The University of Queensland, St. Lucia, Queensland 4072,

Queensland Alliance for Environmental Health Sciences, The University of Queensland,

Department of Chemistry and Chemical Engineering, Sichuan University of Arts and Science,

10

Sichuan, China

11

4

12

NSW 2522, Australia

13

* Corresponding author.

14

KEYWORDS. Micropollutants, adsorption, iron sulfide, biodegradation, sewer, ferric dosing

School of Civil, Mining and Environmental Engineering, University of Wollongong, Wollongong,

ACS Paragon Plus Environment

1

Environmental Science & Technology

Page 2 of 36

15

ABSTRACT. Ferric (Fe3+) salt dosing is an efficient sulfide control strategy in the sewer

16

network, with potential for multiple benefits including phosphorus removal in the biological

17

reactors and sulfide emission control in the anaerobic digesters of wastewater treatment plant

18

(WWTP). This paper extends the knowledge on the benefit of iron dosing by exploring its

19

impact on the fate of organic micropollutants (MPs) in the wastewater using sewer reactors

20

simulating a rising main sewer pipe. The sulfide produced by the sewer biofilms reacted with

21

Fe3+ forming black colored iron sulfide (FeS). Among the selected MPs, morphine, methadone

22

and atenolol had >90% initial rapid removal within five minutes of ferric dosing in the sewer

23

reactor. The ultimate removal after 6-hr of retention time in the reactor reached 93-97%.

24

Other compounds, ketamine, codeine, carbamazepine and acesulfame had 30-70%

25

concentration decrease. The ultimate removal varied between 35 and 70% depending on the

26

biodegradability of those MPs. In contrast, paracetamol had no initial removal. The rapid

27

removal of MPs was likely due to adsorption to the FeS surface, which is further confirmed by

28

batch tests with different FeS concentrations. The results showed a direct relationship between

29

the removal of MPs and FeS concentration. The transformation kinetics of these compounds

30

in the reactor without Fe3+ dosing is in good agreement with biodegradation associated with

31

the sewer biofilms in the reactor. This study revealed a significant additional benefit of dosing

32

ferric salts in sewers, that is the removal of MPs before the sewage enters the WWTP.

33

INTRODUCTION. Hydrogen sulfide in sewers causes serious cracking and failure of the

34

concrete structure, malodor and human health problems 1, 2. Billions of dollars are expended

ACS Paragon Plus Environment

2

Page 3 of 36

Environmental Science & Technology

35

every year due to the need for rehabilitation or replacement of the corroded sewer pipes3. The

36

anaerobic condition in the rising main induces the growth of stratified biofilms comprising of

37

sulfate-reducing bacteria (SRB) and methanogenic archaea (MA)4. The SRB reduce sulfate in

38

the wastewater and produce sulfide that subsequently transfers to the gas phase in the gravity

39

sewers. The H2S gas induces sewer corrosion by forming sulfuric acid on the concrete surface5.

40

Chemicals are commonly used for the control of sulfide, including i) chemical oxidation of

41

sulfide by the injection/addition of air, pure oxygen, nitrate salts

1, 6-8,

42

peroxide, hypochlorites, chlorine and potassium permanganate

ii) pH elevation by the

43

addition of alkali such as Mg(OH)2 and iii) precipitation of sulfide by forming insoluble metal

44

particles through the addition of metal salts such as iron, zinc, lead and copper salts 2. Among

45

the various metal salts used, iron based salts were shown to be most efficient because of its

46

specificity to H2S 11. In Australia iron salts accounted for 66% of the sewage flow dosed with

47

chemicals for sulfide control12.

9, 10

ozone, hydrogen

48

The iron salt dosing in the sewers is effective in the control of dissolved sulfide by the

49

formation of iron sulfide particles 2, 13-15. These studies showed that the mechanism responsible

50

for the removal of sulfide includes the precipitation reaction of Fe2+ ions with sulfide forming

51

ferrous sulfide (FeS), while Fe3+ ions oxidizes sulfide chemically to elemental sulfur, with itself

52

being reduced to Fe2+, which subsequently precipitates sulfide (Equation 1&2). The continuous

53

dosing of iron salts for two months significantly inhibits the SRB and MA production in the

54

long run, leading to reduced demand for iron salts 2.

55

2𝐹𝑒3 + + 𝑆2 ― → 2𝐹𝑒2 + + 𝑆0

(1)

ACS Paragon Plus Environment

3

Environmental Science & Technology

56

𝐹𝑒2 + + 𝐻𝑆 ― → 𝐹𝑒𝑆↓ + 𝐻 +

Page 4 of 36

(2)

57

Further studies found that FeS particles formed in the sewer network can be oxidized in the

58

aerobic activated sludge reactor. This enables phosphorus removal at a ratio of 0.44 and 0.37

59

mg-P/mg of Fe2+ and Fe3+ added to the sewer network13. The iron dosing (e.g. 5–20 mg-Fe/L)

60

to the sewer network was also demonstrated to provide iron for H2S emission control in the

61

anaerobic digester by forming iron sulfide particles 16. Previous studies have demonstrated the

62

multiple benefits of iron salts dosed into sewers, including sewer corrosion and odour control,

63

phosphorus removal and biogas desulfurization 17.

64

Iron salt was shown to be an effective coagulant for the removal of MPs such as

65

pharmaceuticals and personal care products (PPCPs) in the drinking water treatment systems

66

and WWTPs

67

traditional secondary treatment processes. The MPs thus find their way in the aquatic

68

environment and can have adverse effects on aquatic organisms

69

WWTP, MPs go through the sewers with sewage flow and there is very limited understanding

70

about their fate and transformation in the sewers. Some recent studies focused on the biological

71

transformation of organic MPs in the sewer network due to the presence of biofilms 23-25. Also,

72

there are a couple of studies focused on the biodegradation of pharmaceuticals and illicit drugs

73

in the sewer network 26, 27.

18-20.

Organic MPs are ubiquitous in wastewater, and are recalcitrant to the

21, 22.

Before entering the

74

However, no study has systematically investigated the impact of iron salt dosing on the

75

removal of MPs in the sewer network. Considering the coagulating nature of iron salt and the

ACS Paragon Plus Environment

4

Page 5 of 36

Environmental Science & Technology

76

adsorbing nature of iron sulfide particles

28,

it is hypothesized that there can be additional

77

removal of some MPs due to iron dosing on top of in-sewer biodegradation.

78

Collectively speaking, ferric dosing is one of the most widely used strategy to control sewer

79

odor corrosion and odor, with additional beneficial effects on the downstream WWTP. The

80

main objective of this study is to investigate the fate and removal of selected organic MPs from

81

wastewater due to ferric dosing and biological processes in the sewer network. Experiments

82

using laboratory-scale rising main sewer reactors were carried out with selected MPs,

83

including pharmaceuticals and illicit drugs in the wastewater. To understand the removal

84

mechanisms of MPs, batch tests were conducted with different levels of iron sulfide precipitate

85

that was identified and characterized with advanced electron microscopic analysis.

86

2. MATERIALS AND METHODS

87

2.1. CHEMICALS. The reagent grade ferric chloride (FeCl3.6H2O) was purchased from Sigma

88

Aldrich (NSW, Australia). All the drugs and pharmaceuticals were purchased from Cerilliant

89

(Texas, US), Provet (Australia) and Sigma Aldrich (NSW, Australia). The selected MPs include

90

ketamine, methadone, morphine, codeine, carbamazepine, atenolol, paracetamol and

91

acesulfame and their properties are presented in Table S1. The compounds were selected to

92

represent the hydrophobic and hydrophilic MPs in the wastewater. The octanol-water

93

partition coefficient is arranged in the ascending order in Table S1 (Acesulfame being

94

hydrophilic and methadone hydrophobic). Spiking solutions were prepared in Milli-Q water

95

before being spiked in to the reactors. Liquid Chromatography grade methanol was purchased

ACS Paragon Plus Environment

5

Environmental Science & Technology

Page 6 of 36

96

from Merck, Germany. Deionized water was produced by a Milli-Q system (Millipore, 0.22

97

μm filter, 18.2 mΩ·cm−1).

98

2.2. WASTEWATER CHARACTERISTICS. The wastewater used in this study was collected

99

from a local sewer wet well (St. Lucia, Brisbane, Queensland) every week and was stored in

100

the cold room at -4 °C. The sewage typically contained sulfate at concentrations of 10-25 mg-

101

S/L, sulfide at