Room Temperature Magnesite Precipitation - Crystal Growth & Design

Oct 6, 2017 - Michael Lindner , Giuseppe D. Saldi , Salvatore Carrocci , Pascale Bénézeth , Jacques Schott , Guntram ... Keaton M. Belli , Martial T...
5 downloads 0 Views 13MB Size
Subscriber access provided by AUSTRALIAN NATIONAL UNIV

Article

Room temperature magnesite precipitation Ian M. Power, Paul Alexander Kenward, Gregory Martin Dipple, and Mati Raudsepp Cryst. Growth Des., Just Accepted Manuscript • DOI: 10.1021/acs.cgd.7b00311 • Publication Date (Web): 06 Oct 2017 Downloaded from http://pubs.acs.org on October 6, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Crystal Growth & Design is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Crystal Growth & Design

Room temperature magnesite precipitation Ian M. Power*,1, Paul A. Kenward2, Gregory M. Dipple2, and Mati Raudsepp2 School of the Environment, Trent University, Peterborough, ON K9L 0G2, Canada. IMP – [email protected] 2 Department of Earth, Ocean and Atmospheric Sciences, The University of British Columbia, 2207 Main Mall, Vancouver, British Columbia V6T 1Z4, Canada; PAK – [email protected], GMD – [email protected], MR – [email protected] 1

Abstract. Magnesite (MgCO3) is one of the most stable sinks for carbon dioxide (CO2) and is therefore of great interest for long-term carbon storage. Although magnesite is the thermodynamically stable form of magnesium carbonate, the kinetic inhibition of lowtemperature precipitation has hindered the development of carbon sequestration strategies that can be economically conducted under ambient temperature. Here we document the precipitation of magnesite from waters (magnesite saturation index = 1.45) in batch reactors at room temperature with the aid of carboxylated polystyrene microspheres over the course of 70 days. Microspheres provide surfaces with a high density of carboxyl groups that act to bind and dehydrate Mg2+ ions in solution, thereby minimizing the kinetic barrier and facilitating magnesite formation. Magnesite crystals are observed on sphere surfaces and their organic matrices. Mineral identification was confirmed by X-ray diffraction and selected area electron diffraction of a thin section obtained by focused ion beam milling. We demonstrate that kinetic barriers to magnesite formation can be overcome at ambient conditions. Incorporating surfaces with high carboxyl site densities into ex situ mineral carbonation processes and the use of such ligands for deep geologic CO2 storage may offer novel and economically viable strategies for permanent carbon storage.

*corresponding author: Ian M. Power, [email protected] 1 ACS Paragon Plus Environment

Crystal Growth & Design

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 29

Room temperature magnesite precipitation Ian M. Power*,1, Paul A. Kenward2, Gregory M. Dipple2, and Mati Raudsepp2 School of the Environment, Trent University, Peterborough, ON K9L 0G2, Canada. IMP – [email protected] 2 Department of Earth, Ocean and Atmospheric Sciences, The University of British Columbia, 2207 Main Mall, Vancouver, British Columbia V6T 1Z4, Canada; PAK – [email protected], GMD – [email protected], MR – [email protected] 1

*corresponding author: Ian M. Power, [email protected]

ABSTRACT Magnesite (MgCO3) is one of the most stable sinks for carbon dioxide (CO2) and is therefore of great interest for long-term carbon storage. Although magnesite is the thermodynamically stable form of magnesium carbonate, the kinetic inhibition of lowtemperature precipitation has hindered the development of carbon sequestration strategies that can be economically conducted under ambient temperature. Here we document the precipitation of magnesite from waters (magnesite saturation index = 1.45) in batch reactors at room temperature with the aid of carboxylated polystyrene microspheres over the course of 70 days. Microspheres provide surfaces with a high density of carboxyl groups that act to bind and dehydrate Mg2+ ions in solution, thereby minimizing the kinetic barrier and facilitating magnesite formation. Magnesite crystals are observed on sphere surfaces and their organic matrices. Mineral identification was confirmed by selected area electron diffraction of a thin section obtained by focused ion beam milling. We demonstrate that kinetic barriers to magnesite formation can be overcome at ambient conditions. Incorporating surfaces with high carboxyl site densities into ex situ mineral carbonation processes and the use of such ligands for deep geologic CO2 storage may offer novel and economically viable strategies for permanent carbon storage.

ACS Paragon Plus Environment

2

Page 3 of 29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Crystal Growth & Design

1. INTRODUCTION Mechanisms of carbonate formation have long been studied to further our understanding of carbonate depositional environments, yet this area of research has gained greater attention because of its relevance to permanent storage of carbon dioxide (CO2) in both ex situ mineral carbonation processes and deep geologic storage.1-3 Ex situ mineral carbonation technologies aim to capitalize on the globally abundant natural deposits of ultramafic and mafic rocks by forming magnesite (MgCO3) as a stable sink for CO2.1 These proposed technologies are usually operated at high temperature and pressure to achieve fast carbonation rates; however, these approaches are not yet economically viable with current technology.3 At low temperatures, carbonation of Mg-bearing feedstock, either abiotically or biologically, results in the precipitation of metastable hydrated Mg-carbonate minerals such as nesquehonite (MgCO3·3H2O), dypingite [Mg5(CO3)4(OH)2·5H2O] and hydromagnesite [Mg5(CO3)4(OH)2·4H2O].4-9 These metastable phases require considerably more onerous chemical conditions (e.g., higher Mg concentration) than those required to reach magnesite saturation.10 This conundrum in balancing carbonation rates with acceptable costs has spurred a wealth of scientific inquiry with the goal of developing economically feasible carbonation pathways. Magnesite and dolomite [CaMg(CO3)2] have precipitation rates that are orders of magnitude slower than calcite (CaCO3) at Earth’s surface conditions, which has hampered the formation of these minerals in the laboratory at room temperature.9, 11-13 These sluggish rates have hindered our understanding of magnesite formation in natural environments and have generally restricted carbon sequestration technologies that form magnesite to high temperature systems.3, 11 However, magnesite has successfully been precipitated at 35 °C using supercritical

ACS Paragon Plus Environment

3

Crystal Growth & Design

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 29

CO2.14-17 At ambient pressure and low temperatures (