Scale-Up Fabrication of Biodegradable Poly(butylene adipate-co

1 hour ago - This can be attributed to an increase in the nucleation sites in the polymer-crystallizing process and the amorphous form of PBAT matrix ...
0 downloads 12 Views 9MB Size
This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Article Cite This: ACS Omega 2018, 3, 1187−1196

Scale-Up Fabrication of Biodegradable Poly(butylene adipate-coterephthalate)/Organophilic−Clay Nanocomposite Films for Potential Packaging Applications Jiazhuo Xie,†,§ Zhou Wang,‡ Qinghua Zhao,†,∥ Yuechao Yang,§ Jing Xu,*,† Geoffrey I. N. Waterhouse,†,⊥ Kun Zhang,† Shan Li,§ Peng Jin,§ and Geyang Jin§ †

College of Chemistry and Material Science, Shandong Agricultural University, 61 Daizong Street, Tai’an 271000, Shandong, China State Key Laboratory of Nutrition Resources Integrated Utilization, Kingenta Ecological Engineering Co., Ltd, 19 Xingdaxi Street, Linshu 276700, Shandong, China § National Engineering Laboratory for Efficient Utilization of Soil and Fertilizer Resources, National Engineering & Technology Research Center for Slow and Controlled Release Fertilizers, College of Resources and Environment, Shandong Agricultural University, 61 Daizong Street, Tai’an 271000, Shandong, China ∥ Department of Basic Courses, Shandong Medicine Technician College, 999 Fengtian Road, Tai’an 271000, Shandong, China ⊥ School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand ‡

S Supporting Information *

ABSTRACT: The development of biodegradable packing materials is a global priority due to the huge volumes of plastic refuse entering landfills and the environment. In this study, a series of biodegradable nanocomposite films based on poly(butylene adipate-co-terephthalate) (PBAT) and reinforced with an organophilic layered double hydroxide (OLDH) were scale-up fabricated. The OLDH nanosheets with a basal spacing of 4.07 nm were presynthesized on a largescale by solvent-free high-energy ball milling. All of the PBAT/ OLDH nanocomposite films (0.5−4 wt % OLDH) showed a uniform dispersion of OLDH nanosheets in the PBAT matrix. A PBAT/OLDH film containing 1 wt % OLDH (denoted herein as OLDH-1) demonstrated outstanding thermal, optical, mechanical, and water vapor barrier properties compared with a pure PBAT film (OLDH-0), including a 37% reduction in haze and a 41.9% increase in nominal tensile strain at break dramatically. Furthermore, the food packaging measurement revealed that the OLDH-1 film showed a better packaging effect than the pure PBAT film and commercial polyethylene packing materials. The feasibility of scale-up manufacture and the excellent processability, manufacturing scalability, mechanical performance, optical transparency, water vapor barrier properties, and food packaging performance of the PBAT/ OLDH nanocomposite films encourage their future application as biodegradable packaging films.



INTRODUCTION Despite the worldwide application of the commercial petrochemical-based packaging materials nowadays, enormous research effort has been devoted to solve the problem of nonbiodegradable food packaging materials, motivated in large part by increasing the awareness of environmental problems caused by plastics entering landfills and the wider environment.1−5 Furthermore, the excessively strong barrier ability of these packaging materials for water can produce local environment with high humidity when used to pack fruits, giving rise to the possible rapid reproduction of microorganism and therefore accelerating the aging and spoilage process. Based on these disadvantages, to develop ecofriendly biodegradable polymeric packaging materials with appropriate water barrier abilities, many biodegradable polymers, such as polylactide, poly© 2018 American Chemical Society

(propylene carbonate), and poly(butylene adipate-co-terephthalate) (PBAT), have been extensively investigated in the context.6−10 Poly(butylene adipate-co-terephthalate) is a aliphatic− aromatic copolyester thermoplastic that can be blended with other polymeric materials (e.g., polylactic acid) to produce a broad range of plastic film materials for different applications.11−14 Although it shows excellent processability, filmforming property, and biodegradability, the optical, mechanical, and water vapor barrier properties of PBAT still need to be improved to match those of the conventional non-biodegradReceived: December 25, 2017 Accepted: January 9, 2018 Published: January 30, 2018 1187

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196

ACS Omega



Article

RESULTS AND DISCUSSION Fabrication and Processability of the PBAT/OLDH Nanocomposite Films. Intermolecular interactions between the PBAT macromolecular chains (primarily van der Waals interactions between aromatic−aromatic and hydrogen bonding of neighboring PBAT molecules) enhance fluid friction and cause PBAT polymer melts to be viscous,35 resulting in melt blown PBAT films that are sticky and difficult to separate. In this work, the incorporation of an OLDH into the PBAT matrix is found to be highly effective in improving the processability of the polymer. The PBAT/OLDH composites could be melted and blown into films without any difficulty, whereas the obtained films display none of the stickiness typical of pure PBAT films. The improved processability of PBAT/OLDH is attributed to the lubricating effect of OLDH to reduce chain entanglement and friction along the molecular chains. As expected, thermal degradation of organic anion intercalator in OLDH (C12H25PO42−, thermal decomposition temperature: 236 °C) does not occur during the melt blending and blowing steps used for composite film fabrication. Structural and Morphological Characterization of the OLDH and the PBAT/OLDH Films. The FT-IR, XRD, TEM, and scanning electron microscopy (SEM) are employed to characterize the structural and morphological characterization of the OLDH and the PBAT/OLDH films. The FT-IR spectra for the OLDH powder and PBAT/OLDH films (OLDH-0, OLDH-4) are shown in Figure 1. For the OLDH spectra in

able petrochemical-based counterparts, such as linear low density polyethylene.15,16 One of the most effective approaches for enhancing the properties of polymers is to introduce nanofillers at low loadings (typically 1 wt %), the intermolecular interactions between PBAT molecular chains are interrupted by the abundance of OLDH nanosheets and pores in the polymer matrix, weakening the mechanical strength of the films. The enhancement of the tensile properties of PBAT with OLDH addition at low loadings warrants further discussion. PBAT is a flexible polymer, whereas the OLDH particles are rigid fillers. Therefore, the increase in the tensile strength and the nominal tensile strain at break for OLDH-1 is likely related to the high aspect ratio of the OLDH nanosheets and their homogeneous dispersion within the PBAT matrix.43,44 The enhancement in the mechanical properties in the machine direction in the nanocomposite hybrids likely results from a uniform alignment of the OLDH nanosheets in the plane of the PBAT films caused by the shear stress during the film manufacture, and also the excellent interfacial contact of the PBAT chains with the OLDH nanosheets.45 Water Vapor Barrier Properties of PBAT/OLDH Films. The water vapor transmission properties of the PBAT/OLDH films are investigated to evaluate the effect of the OLDH content on the water vapor barrier properties of the films. The water vapor transmission rate (WVTR) of each sample is calculated according to the following eq 1 WVTR (g m−2·24 h) = (24·Δm)/(A ·t )

(1)

where Δm (g) is the mass of water vapor passing through the sample film; A (m2) is the area of each film; and t (h) is the measured time interval. As shown in Figure 8, the addition of OLDH decreases the WVTR of PBAT markedly. The WVTR



CONCLUSIONS A series of biodegradable nanocomposite films based on poly(butylene adipate-co-terephthalate) (PBAT) and an organophilic layered double hydroxide (OLDH) were fabricated at industrial level using a melt blending and blowing method. High-energy ball milling was used to synthesize an OLDH, yielding a pure product in a high yield, with large alkyl

Figure 8. WVTR of different PBAT/OLDH films: OLDH-0, OLDH0.5, OLDH-1, OLDH-2, and OLDH-4 and the water vapor barrier mechanism of PBAT/OLDH films containing OLDH nanosheets. 1192

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196

Article

ACS Omega

Figure 9. Photographs of banana samples with following treatment: (a) exposed to air, (b) packaged with pure PBAT film, and (c) packaged with OLDH-1 film.

Scheme 1. Schematic Illustration for the Manufacture of the Biodegradable PBAT/OLDH Nanocomposite Films

film containing 1% OLDH showed a better packaging effect than pure PBAT film and commercial polyethylene packing materials. These results suggest that OLDH addition to create polymer−OLDH nanocomposites is a viable approach for enhancing the properties of biodegradable polymer films for food packaging application.

phosphonate anions in the interlayer region. The data collected using a variety of techniques demonstrated that OLDH addition at a loading of ∼1 wt % could significantly enhance the optical and mechanical properties of PBAT, whereas also improving the general processability of the PBAT-based films. The SEM investigations confirmed a very uniform distribution of the OLDH particles throughout the PBAT/OLDH films, with the partial delamination of the OLDH layers during processing thought to be responsible for the enhanced optical (37% reduction in haze) and mechanical performance (41.9% increase in the nominal tensile strain at break in machine direction) compared to pure PBAT films. The OLDH nanoplatelets also enhanced the water vapor barrier properties of the PBAT films by creating a physical obstacle and thus a longer migration path for water molecules. The food packaging measurement revealed that the PBAT/OLDH nanocomposite



EXPERIMENTAL SECTION Materials. Poly(butylene adipate-co-terephthalate) (trade name: Biocosafe 2003) with melt flow index 4.2 g (10 min)−1 (190 °C, 2.16 kg) was supplied by Xinfu Pharmaceutical Co., Ltd. (Hangzhou, China). Al(NO3)3·9H2O (AR, 99%), Zn(NO3)2·6H2O (AR, 99%), and NaOH (AR, 99%) were purchased from Aladdin Reagent Co., Ltd. (Shanghai, China). Lauryl alcohol phosphoric acid ester potassium (MAPK) (AR, 97%) was obtained from Lihou Chemical Co., Ltd. 1193

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196

Article

ACS Omega

calorimeter under a nitrogen atmosphere (flow rate of 50 mL min−1). The PBAT/OLDH film samples (8−10 mg) were heated from ambient temperature to 200 °C at 10 °C min−1 and then held at 200 °C for 3 min to erase the thermal history, after which they were cooled to 0 °C at 10 °C min−1 to study the crystallization behavior and finally reheated to 200 °C at 10 °C min−1 to study their melting behavior. The optical properties of the PBAT/OLDH films were examined using an INESA WGT-2S light transmittance/haze tester using GB 2410-2008. Optical photographs of the films were taken with a Canon EOS-700d digital camera. The tensile tests on the PBAT/OLDH films were conducted at ambient temperature using a SUNS UTM2502 electronic universal testing machine. The crosshead speed was set at 200 mm min−1. The sample films were cut into dumbbell-shaped pieces according to the GB/T 1040.3-2006 standard. Five specimens of each PBAT/ OLDH films were measured and the average reported. The water vapor transmission rate (WVTR) of the PBAT/OLDH films was determined using a PERME W3/030 automatic water vapor transmission tester. The experiments were conducted at a temperature of 23 °C under 57% relative humidity conditions according to the GB 1037-88 standard. Before the measurements, the films were placed in a vacuum drying oven at 60 °C for 12 h to remove the moisture. The films were cut into circles of diameter 0.074 m for the measurements. Three specimens of each PBAT/OLDH film were measured and the average value reported.

(Guangzhou, China). All of the reagents were analytical grade and used as received. Deionized water was used in all of the experiments. Synthesis of ZnAl-MAPK OLDH. The organophilic ZnAlMAPK OLDH was directly synthesized by solvent-free highenergy ball milling using a QM-3SP2 planetary ball mill. A mixture of MAPK (51.3 g, 0.15 mol) and NaOH (19.2 g, 0.48 mol) was premilled for 30 min, followed by addition of Zn(NO3)2·6H2O (53.5 g, 0.18 mol) and Al(NO3)3·9H2O (22.5 g, 0.06 mol) and milling for a further 30 min. Four agate pots (inner volume: 500 cm3) and many agate balls (diameter: 6 mm; quantity: 2000; diameter: 10 mm; quantity: 400) were used in a single milling process. The total volume of reactants and agate balls was approximately three-fourths that of the agate pots. The revolution speed and autorotation rate were fixed at 250 and 500 rpm, respectively. After ball milling, the product slurry was washed three times with deionized water and then dried at 70 °C to obtain white ZnAl-MAPK OLDH powders (yield 180 g). The OLDH powders were ground in a mortar and pestle and then passed through an 800 mesh (0.015 mm) sieve before subsequent use in composite manufacture. The ZnAl-MAPK OLDH powder is simply denoted as OLDH in the text below. Manufacture of PBAT/OLDH Nanocomposite Films. The PBAT/OLDH nanocomposite films were manufactured by melt blending and blowing process. First, PBAT and OLDH were mixed using a SHR-10A high-speed mixer at a rotary speed of 60 rpm for 10 min, and then the resulting mixture was fed into a SHJ135 co-rotating twin-screw extruder operating at a screw speed of 120 rpm with a temperature difference between the feed and die zones of 120−145 °C. The extruded PBAT/OLDH nanocomposite granulates were subsequently melted and blown into films using a SGXM-1800 single-screw film blowing machine operating at 40 rpm and temperatures of 110, 120, 125, and 130 °C along the four barrel zones. The manufacturing process of the PBAT/OLDH nanocomposite films is summarized in Scheme 1. The mass ratios of PBAT and OLDH were 100/0, 99.5/0.5, 99/1, 98/2, and 96/4, respectively, with the corresponding PBAT/OLDH nanocomposite films abbreviated as OLDH-0, OLDH-0.5, OLDH1, OLDH-2, and OLDH-4 in the text below. For each film, the total mass of PBAT and OLDH was constant (4 kg) and the film thickness controlled at 50 ± 1 μm. The film samples were stored in a desiccator at room temperature before characterization tests. Characterization. FT-IR spectra were recorded on a Thermo Nicolet 380 spectrometer using the KBr disk method over the range of 4000−400 cm−1. Thirty two consecutive scans collected at a resolution of 4 cm−1 were co-added to produce a spectrum. The X-ray diffraction (XRD) patterns were obtained on a Bruker D8 Advance diffractometer, equipped with a Cu Kα source (λ = 1.54056 Å) operating at 40 kV and 40 mA. Data were collected over the 2θ range 1− 60°, with a step of 0.02° and a scan speed of 4° min−1. The sample morphologies were examined using an H-800 transmission electron microscope and a JEOL JSM-6380LV scanning electron microscope. The SEM analyses were performed on freeze-fractured PBAT/OLDH films, which were immersed in liquid nitrogen and then fractured. The fractured surfaces were then sputtered coated with gold to improve their conductivity for imaging. The melting and crystallization behavior of the PBAT/OLDH films were investigated using a Netzsch DSC 200PC differential scanning



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsomega.7b02062. Photograph of the condensation of the water droplet of banana packed by commercial polyethylene packing film; food packaging experiment packed with different films (PDF)



AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]. ORCID

Yuechao Yang: 0000-0003-4045-0252 Jing Xu: 0000-0003-2935-880X Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS This work was supported by the National Key R&D Program of China (Grant No. 2016YFB0302403), the Major Scientific and Technological Innovation Projects (Grant No. 310139), the Project of Shandong Province Education Department (Grant No. ZR2014JL023), the National Natural Science Foundation of China (Grant No. 31572201), and Shandong Youth Education Science Program for College Students (Grant No. 17BSH113). We thank Y.F. for his assistant in the revision of our manuscript.



REFERENCES

(1) Morelli, C. L.; Belgacem, M. N.; Branciforti, M. C.; Bretas, R. E.; Crisci, A.; Bras, J. Supramolecular aromatic interactions to enhance biodegradable film properties through incorporation of functionalized cellulose nanocrystals. Composites, Part A 2016, 83, 80−88.

1194

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196

Article

ACS Omega (2) Piekarska, K.; Sowinski, P.; Piorkowska, E.; Haque, M. M.-U.; Pracella, M. Structure and properties of hybrid PLA nanocomposites with inorganic nanofillers and cellulose fibers. Composites, Part A 2016, 82, 34−41. (3) El Miri, N.; Abdelouahdi, K.; Barakat, A.; Zahouily, M.; Fihri, A.; Solhy, A.; El Achaby, M. Bio-nanocomposite films reinforced with cellulose nanocrystals: Rheology of film-forming solutions, transparency, water vapor barrier and tensile properties of films. Carbohydr. Polym. 2015, 129, 156−167. (4) Youssef, A. M.; El-Sayed, S. M.; Salama, H. H.; El-Sayed, H. S.; Dufresne, A. Evaluation of bionanocomposites as packaging material on properties of soft white cheese during storage period. Carbohydr. Polym. 2015, 132, 274−285. (5) Dhar, P.; Gaur, S. S.; Soundararajan, N.; Gupta, A.; Bhasney, S. M.; Kumar, A.; Katiyar, V.; et al. Reactive extrusion of polylactic acid/ cellulose nanocrystal films for food packaging applications: Influence of filler type on thermo-mechanical, rheological and barrier properties. Ind. Eng. Chem. Res. 2017, 56, 4718−4735. (6) Ç oban, O.; Bora, M. Ö .; Kutluk, T.; Ö zkoç, G. Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites. Polym. Compos. 2017, DOI: 10.1002/pc.24393. (7) Li, R. Y.; Wu, L. B.; Li, B. G. Poly(l-lactide) materials with balanced mechanical properties prepared by blending with PEG-mbPPA multiblock copolymers. Ind. Eng. Chem. Res. 2017, 56, 2773− 2782. (8) Zheng, F.; Mi, Q. H.; Zhang, K.; Xu, J. Synthesis and characterization of poly(propylene carbonate)/modified sepiolite nanocomposites. Polym. Compos. 2016, 37, 21−27. (9) Zhou, L. Y.; Zhao, G. Y.; Jiang, W. Effects of catalytic transesterification and composition on the toughness of poly(lactic acid)/poly(propylene carbonate) blends. Ind. Eng. Chem. Res. 2016, 55, 5565−5573. (10) Li, S.; Deng, L.; Xu, C.; Wu, Q. H.; Wang, Z. G. Making a supertough flame-retardant polylactide composite through reactive blending with ethylene-acrylic ester-glycidyl methacrylate terpolymer and addition of aluminum hypophosphite. ACS Omega 2017, 2, 1886− 1895. (11) Wu, N.; Zhang, H. Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends. Mater. Lett. 2017, 192, 17−20. (12) Nofar, M.; Heuzey, M. C.; Carreau, P. J.; Kamal, M. R. Effects of nanoclay and its localization on the morphology stabilization of PLA/ PBAT blends under shear flow. Polymer 2016, 98, 353−364. (13) Moustafa, H.; Galliard, H.; Vidal, L.; Dufresne, A. Facile modification of organoclay and its effect on the compatibility and properties of novel biodegradable PBE/PBAT nanocomposites. Eur. Polym. J. 2017, 87, 188−199. (14) Lin, S.; Guo, W. N.; Chen, C. Y.; Ma, J.; Wang, B. B. Mechanical properties and morphology of biodegradable poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends compatibilized by transesterification. Mater. Des. 2012, 36, 604−608. (15) Fukushima, K.; Wu, M.-H.; Bocchini, S.; Rasyida, A.; Yang, M.C. PBAT based nanocomposites for medical and industrial applications. Mater. Sci. Eng., C 2012, 32, 1331−1351. (16) Raquez, J. M.; Nabar, Y.; Narayan, R.; Dubois, P. Novel highperformance talc/poly [(butylene adipate)-co-terephthalate] hybrid materials. Macromol. Mater. Eng. 2008, 293, 310−320. (17) Chieng, B.; Ibrahim, N.; Wan Yunus, W. Effect of organomodified montmorillonite on poly (butylene succinate)/poly (butylene adipate-co-terephthalate) nanocomposites. eXPRESS Polym. Lett. 2010, 4, 404−414. (18) Jo, C. I.; Ko, J. U.; Yin, Z. X.; Kim, Y. J.; Kim, Y. S. Solvent-free and highly transparent SiO2 nanoparticle-polymer composite with an enhanced moisture barrier property. Ind. Eng. Chem. Res. 2016, 55, 9433−9439. (19) Zhang, M.; Wei, T.; Zhang, A. M.; Li, S. L.; Shen, F. C.; Dong, L. Z.; Li, D. S.; Lan, Y. Q. Polyoxomolybdate-polypyrrole/reduced graphene oxide nanocomposite as high-capacity electrodes for lithium storage. ACS Omega 2017, 2, 5684−5690.

(20) Chen, J.-H.; Yang, M.-C. Preparation and characterization of nanocomposite of maleated poly (butylene adipate-co-terephthalate) with organoclay. Mater. Sci. Eng., C 2015, 46, 301−308. (21) Livi, S.; Sar, G.; Bugatti, V.; Espuche, E.; Duchet-Rumeau, J. Synthesis and physical properties of new layered silicates based on ionic liquids: improvement of thermal stability, mechanical behaviour and water permeability of PBAT nanocomposites. RSC Adv. 2014, 4, 26452−26461. (22) Xie, W.; Gao, Z. M.; Pan, W.-P.; Hunter, D.; Singh, A.; Vaia, R. Thermal degradation chemistry of alkyl quaternary ammonium montmorillonite. Chem. Mater. 2001, 13, 2979−2990. (23) Zhang, J.; Hu, H.; Li, Z.; Lou, X. W. Double-shelled nanocages with cobalt hydroxide inner shell and layered double hydroxides outer shell as high-efficiency polysulfide mediator for lithium-sulfur batteries. Angew. Chem., Int. Ed. 2016, 55, 3982−3986. (24) Zhou, C.-H. Emerging trends and challenges in synthetic claybased materials and layered double hydroxides. Appl. Clay Sci. 2010, 48, 1−4. (25) Hennous, M.; Derriche, Z.; Privas, E.; Navard, P.; Verney, V.; Leroux, F. Lignosulfonate interleaved layered double hydroxide: A novel green organoclay for bio-related polymer. Appl. Clay Sci. 2013, 71, 42−48. (26) Mohapatra, L.; Parida, K. A review on the recent progress, challenges and perspective of layered double hydroxides as promising photocatalysts. J. Mater. Chem. A 2016, 4, 10744−10766. (27) Long, X.; Wang, Z. L.; Xiao, S.; An, Y. M.; Yang, S. H. Transition metal based layered double hydroxides tailored for energy conversion and storage. Mater. Today 2016, 19, 213−226. (28) Wang, L. L.; Li, B.; Zhang, X. C.; Chen, C. X.; Zhang, F. Effect of intercalated anions on the performance of Ni-Al LDH nanofiller of ethylene vinyl acetate composites. Appl. Clay Sci. 2012, 56, 110−119. (29) Ciou, C.-Y.; Li, S.-Y.; Wu, T.-M. Morphology and degradation behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/layered double hydroxides composites. Eur. Polym. J. 2014, 59, 136−143. (30) Liu, L.; Yu, T.; Wang, G.; Wang, P.; Wei, Z.; Qi, M. Ringopening polymerization approach to ε-caprolactone grafting onto modified LDH biodegradable nanocomposites. J. Controlled Release 2013, 172, No. e132. (31) Chen, Y. A.; Tsai, G. S.; Chen, E. C.; Wu, T. M. Thermal degradation behaviors and biodegradability of novel nanocomposites based on various poly[(butylene succinate)-co-adipate] and modified layered double hydroxides. J. Taiwan Inst. Chem. Eng. 2017, 77, 263− 270. (32) Zhang, F. R.; Du, N.; Song, S.; Liu, J. Q.; Hou, W. G. Mechanohydrothermal synthesis of Mg2Al−NO3 layered double hydroxides. J. Solid State Chem. 2013, 206, 45−50. (33) Iwasaki, T.; Yoshii, H.; Nakamura, H.; Watano, S. Simple and rapid synthesis of Ni−Fe layered double hydroxide by a new mechanochemical method. Appl. Clay Sci. 2012, 58, 120−124. (34) Schrijvers, D. L.; Leroux, F.; Verney, V.; Patel, M. K. Ex-ante life cycle assessment of polymer nanocomposites using organo-modified layered double hydroxides for potential application in agricultural films. Green Chem. 2014, 16, 4969−4984. (35) Al-Itry, R.; Lamnawar, K.; Maazouz, A. Reactive extrusion of PLA, PBAT with a multi-functional epoxide: physico-chemical and rheological properties. Eur. Polym. J. 2014, 58, 90−102. (36) Chen, W.; Qu, B. J. Structural characteristics and thermal properties of PE-g-MA/MgAl-LDH exfoliation nanocomposites synthesized by solution intercalation. Chem. Mater. 2003, 15, 3208− 3213. (37) Xie, J.; Yang, Y.; Gao, B.; Wan, Y.; Li, Y. C.; Xu, J.; Zhao, Q. Biomimetic Superhydrophobic Biobased Polyurethane-Coated Fertilizer with Atmosphere “Outerwear”. ACS Appl. Mater. Interfaces 2017, 9, 15868−15879. (38) Ibrahim, N. A.; Rahim, N. M.; Yunus, W. Z. W.; Sharif, J. A study of poly vinyl chloride/poly (butylene adipate-co-terephthalate) blends. J. Polym. Res. 2011, 18, 891−896. (39) Gao, Y.; Wu, J.; Zhang, Z.; Jin, R.; Zhang, X.; Yan, X.; Umar, A.; Guo, Z.; Wang, Q. Synthesis of polypropylene/Mg3Al-X (X = CO32−, 1195

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196

Article

ACS Omega NO3−, Cl−, SO42−) LDH nanocomposites using a solvent mixing method: thermal and melt rheological properties. J. Mater. Chem. A 2013, 1, 9928−9934. (40) Xie, J. Z.; Zhang, K.; Wu, J. F.; Ren, G. F.; Chen, H. Y.; Xu, J. Bio-nanocomposite films reinforced with organo-modified layered double hydroxides: preparation, morphology and properties. Appl. Clay Sci. 2016, 126, 72−80. (41) Mathieu, L. M.; Mueller, T. L.; Bourban, P. E.; Pioletti, D. P.; Müller, R.; Månson, J. A. Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering. Biomaterials 2006, 27, 905−916. (42) Gopakumar, T. G.; Lee, J. A.; Kontopoulou, M.; Parent, J. S. Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene composites. Polymer 2002, 43, 5483− 5491. (43) Mohanty, S.; Nayak, S. K. Biodegradable nanocomposites of poly (butylene adipate-co-terephthalate) (PBAT) with organically modified nanoclays. Int. J. Plast. Technol. 2010, 14, 192−212. (44) Xie, J. Z.; Zhang, K.; Zhao, Q. H.; Wang, Q. G.; Xu, J. Largescale fabrication of linear low density polyethylene/layered double hydroxides composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties. J. Solid State Chem. 2016, 243, 62−69. (45) Inoue, Y.; Yoshie, N. Structure and physical properties of bacterially synthesized polyesters. Prog. Polym. Sci. 1992, 17, 571−610. (46) Ż enkiewicz, M.; Richert, J. Permeability of polylactide nanocomposite films for water vapour, oxygen and carbon dioxide. Polym. Test. 2008, 27, 835−840. (47) Tas, C. E.; Hendessi, S.; Baysal, M.; Unal, S.; Cebeci, F. C.; Menceloglu, Y. Z.; Unal, H. Halloysite nanotubes/polyethylene nanocomposites for active food packaging materials with ethylene scavenging and gas barrier properties. Food Bioprocess Technol. 2017, 10, 789−798.

1196

DOI: 10.1021/acsomega.7b02062 ACS Omega 2018, 3, 1187−1196