Goodrich-Gulf Chemicals, Inc. Ameripol ; Code · HOT
R E M A R K S
Α Ρ Ρ LI
1OO0
General purpose hot rubber adaptable to most black products or products where color is unimportant.
lOOl
More resistant to staining and discoloring than 1002. Higher tensile and lower modulus in cured com pounds than 1000 o r 1001. Tends to slower curing, thus some adjustment might be necessary. Improved non-discoloring and non-staining polymer.
1002 1O06
A glue-acid coagulated staining polymer with rela tively low water absorption- low ash, and improved electrical properties. Non-staining cross-linked polymer. Use o f small quantities with other type polymers effectively r e duces shrinkage and die-swell in calender a n d extrusion operations.
1O07 1O09 COLD
1501 1502
COLD
1705 1707
1708
1710 1712
NON-OIL.
I O N S
Tires, molded and extruded mechanical goods, and many general purpose appli cations. Tires, molded and extruded mechanical goods, shoe soles and heels. Tires, molded and extruded mechanical goods. Light colored and white products such as white side-wall tires, shoe soles, floor tile, toys, etc. Wire and cable insulation, electrical mat ting, gaskets, hard rubber products, etc. Wherever control of shrinkage is impor tant—footwear, wire and cable insulation, calendered sheet goods, camelback, soles and heels.
POLYMERS
General purpose cold rubber where color a n d stain ing is unimportant. Same as 1500 except slightly staining stabilizer which permits use in some darker colored p r o d u c t s . Relatively non-discoloring and non-staining cold rubber.
1500
1703
CAT
POLYMERS
OIL-EXTENDED
Tires, camelback, molded and extruded mechanical goods. Tires, molded mechanical goods. Light colored and white products such as white sidewall tires, white and light col ored mechanical goods, floor tile, hos pital sheeting, toys, shoe soles and heels.
POLYMERS
General purpose relatively non-discoloring, nonstaining polymer containing 2 5 parts oil. Presence of naphthenic oil may affect stain characteristics. General purpose polymer containing 25 parts aro matic oil for use where staining, discoloring is un important. Similar to 1703 but for 3 7.5 parts naphthenic o i l , and emulsified with rosin soap rather than mixed soaps. Relatively non-discoloring, non-staining polymer containing 37.5 parts naphthenic oil. Glue acid coagulation provides lower water absorption a n d improved electrical properties. Similar to 1705 except for 37.5 parts o f an aro matic oil. General purpose oil extended for use where color is unimportant. 37.5 parts high aromatic o i l .
selection guide to Ameripol man-made rubber is a preferred material for conveyor and drive belts, rolls, extrusions, molded goods, and many other industrial products. Ameripol is superior to natural rubber in resistance to wear, water, and chemicals. Superior aging properties can be provided by com pounding techniques.
Light colored and white products—tires, mechanical g o o d s , floor tile, h o s p i t a l sheeting, toys, shoe soles and heels. Tires, camelback, molded and extrudedmechanical goods. Tires, camelback, shoe soles and heels, molded and extruded mechanical goods.
r
Wire and cable insulation, athletic goods, coated fabrics, molded a n d e x t r u d e d mechanical goods. Tires, camelback, molded and extruded goods. Tires, camelback, molded and extruded mechanical goods, wire and cable in sulation.
man-made rubber A 24-page booklet "Ameripol— the preferred rubber" lists tech nical data, specifications, and physical properties. T o get the facts on this preferred material write for your free copy today.
Cold Non-Oil Polymers Cold Oi ExtendedPolymers Hot Non-Oil Polymers .
^ r
Goodrich-Gulf Chemicals, Inc. 3 1 2 1 Euclid Avenue · Cleveland 1 5. O h i o FEB.
4,
1957
C&EN
17
