Selective Adsorption and Selective Transport Diffusion of CO2–CH4

Aug 12, 2016 - Beijing Key Laboratory of Energy Saving and Emission Reduction for Metallurgical Industry, University of Science and Technology Beijing...
0 downloads 0 Views 3MB Size
Subscriber access provided by Northern Illinois University

Article

Selective adsorption and selective transport diffusion of CO-CH binary mixture in coal ultramicropores 2

4

Yongliang Zhao, Yanhui Feng, and Xinxin Zhang Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b01294 • Publication Date (Web): 12 Aug 2016 Downloaded from http://pubs.acs.org on August 15, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 40

Environmental Science & Technology

1

Selective adsorption and selective transport diffusion

2

of CO2-CH4 binary mixture in coal ultramicropores

3

Yongliang Zhao,a,b Yanhui Feng, a,c,* and Xinxin Zhang a,c a

4

School of Energy and Environmental Engineering, University of Science and Technology

5

Beijing, Beijing 100083, China b

6

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University,

7

Xi’an 710049, China c

8 9

Beijing key laboratory of Energy Saving and Emission Reduction for Metallurgical Industry, University of Science and Technology Beijing, Beijing 100083, China

10

*

Corresponding author

E-mail: [email protected] (Yanhui Feng) Tel: +86-010-62334971 Fax: +86-010-62329145

ACS Paragon Plus Environment

1

Environmental Science & Technology

Page 2 of 40

11

ABSTRACT

12

The adsorption and diffusion of the CO2-CH4 mixture in coal and the underlying mechanisms

13

significantly affect the design and operation of any CO2-enhanced coal-bed methane recovery

14

(CO2-ECBM) project. In this study, bituminous coal was fabricated based on the Wiser

15

molecular model and its ultra-microporous parameters were evaluated; molecular simulations

16

were established through Grand Canonical Monte Carlo (GCMC) and Molecular Dynamic (MD)

17

methods to study the effects of temperature, pressure, and species bulk mole fraction on the

18

adsorption isotherms, adsorption selectivity, three distinct diffusion coefficients, and diffusivity

19

selectivity of the binary mixture in the coal ultramicropores. It turns out that the absolute

20

adsorption amount of each species in the mixture decreases as temperature increasing, but

21

increases as its own bulk mole fraction increasing. The self-, corrected, and transport diffusion

22

coefficients of pure CO2 and pure CH4 all increase as temperature or/and their own bulk mole

23

fractions increasing. Compared to CH4, the adsorption and diffusion of CO2 are preferential in

24

the coal ultramicropores. Adsorption selectivity and diffusivity selectivity were simultaneously

25

employed to reveal that the optimal injection depth for CO2-ECBM is 800-1000 m at 308-323 K

26

temperature and 8.0-10.0 MPa.

27

28

ACS Paragon Plus Environment

2

Page 3 of 40

29

Environmental Science & Technology

Table of Contents

30 31 32

KEYWORDS:

33

Binary mixture; Adsorption selectivity; Diffusivity selectivity; Transport diffusion coefficient;

34

CO2-ECBM.

35

ACS Paragon Plus Environment

3

Environmental Science & Technology

36

Page 4 of 40

1. Introduction

37

Anthropogenic greenhouse gas (GHG) emissions and their impact on the global climate

38

represent one of the defining environmental issues facing modern society. Of particular concern

39

is the emission of CO2, which is the largest contributor to climate change effects.1-5 CO2-

40

enhanced coal-bed methane recovery (CO2-ECBM) project, which pumps CO2 into deep,

41

unmineable coal seams, represents an effective and direct approach to reducing atmospheric CO2

42

concentration.6-8 CO2-ECBM is attractive because it can not only store CO2 that has been

43

captured but also can recover CH4 as a fuel or a technical gas, which makes CO2 storage an

44

interesting economic prospect.9, 10 Prior to any large-scale implementation of this type of project,

45

it is necessary to comprehensively establish both the adsorption and diffusion mechanisms of the

46

CO2-CH4 mixture in coal.

47

Competitive adsorption equilibria in the CO2-CH4 mixture are of key importance for CO2-

48

ECBM, so considerable efforts have been made in recent years to determine their adsorption

49

properties.11, 12 There are many available methods for measuring the adsorption isotherms of pure

50

CO2 and pure CH4 including the volumetric method,13,

51

gravimetric method.17 Based on the single component, the literature provides an estimate of the

52

maximum capacity for CO2 storage and CH4 recovery; of course, the adsorptions of CO2 and

53

CH4 actually happen simultaneously on the coal matrix, i.e., there is adsorption of a CO2-CH4

54

mixture. Studies on multi-component adsorption have grown increasingly popular. The

55

adsorption of the binary mixture can be measured by a gravimetric-chromatographic method18-20

56

or using a high pressure scanning calorimeter.21 According to International Union of Pure and

57

Applied Chemistry (IUPAC), the coal pores were classified into four groups: macropores (pore

58

size d>50 nm), mesopores (2-50 nm), micropores (d