Significantly Enhanced Energy Density in Nanocomposite Capacitors

Sep 13, 2016 - Significantly Enhanced Energy Density in Nanocomposite Capacitors Combining the TiO2 Nanorod Array with Poly(vinylidene fluoride)...
0 downloads 0 Views 2MB Size
Subscriber access provided by UNIVERSITY OF LEEDS

Article

Significantly Enhanced Energy Density in Nanocomposite Capacitors Combining the TiO2 Nanorod Array with Poly(vinylidene fluoride) Lingmin Yao, Zhongbin Pan, Shaohui Liu, JiWei Zhai, and Haydn H.D. Chen ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b09265 • Publication Date (Web): 13 Sep 2016 Downloaded from http://pubs.acs.org on September 15, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Significantly Enhanced Energy Density in Nanocomposite Capacitors Combining the TiO2 Nanorod Array with Poly(vinylidene fluoride) Lingmin Yaoa, Zhongbin Panb, Shaohui Liub, Jiwei Zhaib*, Haydn H.D. Chena* a

Institute of Applied Physics and Materials Engineering, Faculty of Science and

Technology, University of Macau, Macao SAR 999078, China b

Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education,

Functional Materials Research Laboratory, School of Materials Science & Engineeri g,Tongji University, 4800 Caoan Road, Shanghai 201804, China.

ABSTRACT A novel inorganic/polymer nanocomposite, using 1-dimensional TiO2 nanorod array as fillers (TNA) and poly(-vinylidene fluoride) (PVDF) as matrix, has been successfully synthesized for the first time. A carefully designed process sequence includes several steps with the initial epitaxial growth of highly oriented TNA on the fluorine-doped tin oxide (FTO) conductive glass. Subsequently, PVDF is embedded into the nanorods by spin coating method followed by annealing and quenching processes. This novel structure with dispersive fillers demonstrates a successful compromise between the electric displacement and breakdown strength, resulting in a dramatic increase in the electric polarization which leads to a significant improvement on the energy density and discharge efficiency. The nanocomposites with various height ratios of fillers between the TNA and total film thickness were investigated by

a

Faculty of Science and Technology, University of Macau Macau SAR, China. E-mail address: [email protected] (Haydn

H.D. Chen) b

School of Materials Science & Engineerig,Tongji University, 4800 Caoan Road, Shanghai 201804, China. E-mail address:

[email protected] (Jiwei, Zhai)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

us. The results show that nanocomposite with 18% height ratio fillers obtains maximum increase in the energy density (10.62 J cm-3) at a lower applied electric field of 340 MV m-1. And it also illustrates a higher efficiency (>85%) under the electric field less than 100 MV m-1. Even when the electric filed reached 340 MV m-1, the efficiency of nanocomposites can still maintained at ~ 70%. This energy density exceeds most of the previously reported TiO2-based nanocomposite values at such a breakdown strength, which provides another promising design for the next generation of dielectric nanocomposite material, by using the highly oriented nanorod array as fillers for the higher energy density capacitors. Additionally, the finite element simulation has been employed to analyze the distribution of electric fields and electric flux density to explore the inherent mechanism of the higher performance of the TNA/PVDF nanocomposites.

KEYWORDS: Energy density, Capacitors, Nanorod arrays, Titanium oxides, Nanocomposites, Poly(vinylidene fluoride)

ACS Paragon Plus Environment

Page 2 of 32

Page 3 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

1. INTRODUCTION Owing to the ever-increasing concerns of environmental problems caused by the exhaust of fossil fuels, research of energy storage system using the sustainable and renewable resources has attracted considerable attention. Among the various energy storage

systems,

the

dielectric

capacitors

with

the

merit

of

ultrafast

charging-discharging ability have become an important technology which would greatly benefit the high performance power electronics used in military power system, hybrid electric vehicles and some potable electronics

1-4

. However, compared with

some electrochemical energy storage such as the lithium ion battery and supercapacitor, the current dielectric capacitor suffers from the relatively lower energy density. In order to realize the large scale application of dielectric capacitors, it is critical to find solutions to significantly enhance its energy density. In general, the energy density in dielectric capacitor can be written in the form (1)

 =   

where E is the applied electric field, and D is the electric displacement. Specially, when it comes to the linear dielectrics, the total energy Ue =



  

 



, where

E,  ,  denote the breakdown strength, the relative dielectric constant and the vacuum permittivity, respectively. In consideration of the fact that  is proportional to the square of the electric field, organic polymers with higher breakdown strength as well as lower dielectric loss initially play a dominant role in dielectric capacitors. Furthermore, the formability and easy processability are helpful for the polymer-based dielectric capacitors to be made into various shapes and forms, readily embedded into the electronic devices, hence enabling the continuing miniaturization of electronic devices. However, the practical polymer dielectric materials, such as the biaxially oriented polypropylene (BOPP) film and polypropylene (PP), are impeded by its

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

inherent lower dielectric permittivity (generally Tg. This phenomenon becomes more obvious in higher frequency (1MHz). The shift of the dielectric relaxation peak towards a lower temperature and the reduced dielectric loss tangent at higher frequency are indicative of interface polarization interaction and an increased trap density caused by the incorporation of TO nanorod array into the PVDF 12. The electric breakdown strength was determined using the Weibull analysis after testing 12 samples with various filler height ratios (inserted in Fig.6d). The average breakdown strength could be obtained by the / intersect of the fitting line. The breakdown strength of the bare PVDF is 410 MV m-1. When the height ratio reaches 0.18, the value still could maintained at 344 MV m-1 though it decreases in other nanocomposites with various height ratios. The energy density was calculated according by the aforementioned integration of Equation 1. Figure 6 compares the (D-E) loops (a) before breakdown and energy density (b) of the TNA/PVDF nanocomposite and bare PVDF. Actually, the incorporation of TO nanorod array with

ACS Paragon Plus Environment

Page 14 of 32

Page 15 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

a homogenous dispersion and highly orientation in the polymer matrix would induce a significant electrical polarization and moderated breakdown strength, thus contributing to the final higher energy density of the nanocomposite. For the nanocomposite with h0.18, h0.25 and h0.36, the maximum polarization can reach to 8.57, 7.91, 7.85 µC cm-2, respectively, but the value is 3.82 µC cm-2 for the PVDF. Under the electric field of 150, 250, 300 and 400 MV m-1, the electric displacement of nanocomposites in h0.18 increases to 2.73, 5.70, 7.30 and 8.57 µC cm-2, respectively, but this value of bare PVDF with the similar condition is 1.46, 2.5, 3.0 and 3.82 µC cm-2, respectively (Figure 6c). The highly oriented nanorod array might play a dominant role in the contribution to the dramatic increase of the polarization besides the interfacial polarization in the binary nanocomposite. Consequently, the maximum discharge energy density, a more important parameter to characterize the effective energy storage capability of dielectric material, increases from 3.02 J cm-3 for bare PVDF to 10.62 J cm-3 for TNA/PVDF nanocomposite with h0.18 at the 340 MV m-1, respectively (Figure 6b). A comparison of the discharge energy density as a function of electric field is illustrated in Figure 6b. The maximum discharge energy density of nanocomposites with h0.36 is 2.2 J cm3 at 100 MV m-1 and that value is 4.1 J cm3 for h0.25 at 200 MV m-1. But the nanocomposite with h0.18 could obtain the energy density as high as 10.62 J cm-3 at the breakdown strength of 340 MV m-1, which is almost 3.5 times than the magnitude of PVDF under the same condition. Particularly, to the best of the authors’ knowledge, the energy density of 10.62 J cm-3 is by far the highest value achieved for similar condition in TO-based nanocomposites. Now the majority of the reported nanocomposite that could obtain higher energy density >10 J cm-3 relies strongly on the two following aspects rather than the high dielectric constant: Ⅰ) the outstanding higher breakdown strength and some even exceed the value of polymer itself; Ⅱ) the

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

polymer generally used in the experiments itself is characterized by the higher energy density. For instance, Nan9 demonstrated that the BTO@TO nfs could reach a discharged energy density of ≈20 J cm-3 at the enhanced electric breakdown strength of 646 MV m-1. And the energy density is about 8 J cm-3 at 400 MV m-1. Another higher energy density value of 21.2 J cm–3 also has been obtained in a ferroelectric copolymer nanocomposite, which generally benefits from polymer itself and the total loading of nanoparticles is ≈27 wt.% (17–25 J cm-3 could be reached for P(VDF-CTFE) manufactured via melt-stretching and extrusion-blowing processes) 32. Though Tang26 has reported that the energy density of nanocomposite with 7.5 vol.% TiO2 could reach 12.4 J cm-3 at 450 MV m-1, it also should be noted that this value relies strongly on the larger breakdown strength ( 450 MV m-1). Furthermore, the PVDF employed in their experiments exhibited by itself an excellent performance (about 10 J cm-3 at the 450 MV m-1). Particularly, the maximum displacement in our nanocomposite reached at a value as high as 8.57 µC cm-2 at 340 MV m-1, almost the same as the value of 450 MV m-1 in Tang’s report. Even compared with the other inorganic/polymer nanocomposite, the value of our energy density and the increment, though is not the highest so far, exceed most of the previous studies in similar conditions. The discharge efficiency η of a capacitor is another important factor in the practical application(η =

123456 768 173298 9:95; 78 173298

). The TNA/PVDF nanocomposites

with h0.18 illustrates a higher efficiency (>85%) under the electric field less than 100 MV m-1. Even when the electric filed reached 340 MV m-1, the efficiency of nanocomposites can still maintained at ~ 70%. However, efficiency of PVDF decreased dramatically to 48% at the 340 MV m-1. Consideration of the practical application in pulsed power source, the TNA/PVDF nanocomposite was evaluated by

ACS Paragon Plus Environment

Page 16 of 32

Page 17 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

charge-discharge test using similar circuit in the literature (Figure 7)

16, 34

. The

capacitor made of TNA/PVDF nanocomposite was initially charged under 100 MV m-1, and then discharged at an oscillation circuit. τ.= is defined as the time when the capacitor releases 90% of its total energy into the load. Figure 7a shows that the nanocomposites can release the energy in an extremely short time duration in the order of "μs". When the capacitor was charged at the electric field of 100 MV m-1, the released energy is ~ 0.9 J cm-3 (Figure 7b), which agreed well with the calculation result from the hysteresis loop (Figure 6b). In order to explore the reasons behind this high performance of the nanocomposites in energy density, the distribution of electric fields and electric flux density was simulated by the ANSYS (Figure 8) referring the height ratio of 0.18 . The deeper the color, the stronger the trend when follows the sequence of array. It is worthwhile to noting that weak electric fields are formed on the bottom region containing TO nanorod array when the interspace among TO nanorods is full of PVDF (Figure 8a). Actually, the electric fields at the interface between the fillers and matrix is indeed weaken than that of PVDF above nanorod, which is related to the lower dielectric contrast between the fillers and matrix. Therefore, the breakdown strength of the nanocomposites is mainly determined by the PVDF above the nanorods. Particularly, the electric flux density keeps a lower value in the most area except the edge region located by the TO nanorod (in red color of Figure 8b). Ultimately, experimental breakdown strength of the nanocomposites reduces a little when compares with the bare PVDF, but the TO nanorod array could enhance significantly the electric displacement to increase the energy density of the nanocomposites. Therefore, the reasons for higher performance of nanocomposites in energy density might include the following aspects:Ⅰ) choosing the non-ferroelectric TO as fillers so as to obtain a lower remnant polarization effectively in the whole test, thus increasing

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

the effective releasable energy density; Ⅱ) the TO with quite low dielectric constant helps to improve the compatibility between the fillers and the polymer, subsequently weakening the interfacial electric field imposed on the matrix; Ⅲ) the isolated nanorod array as fillers not only has a perfect dispersion in the polymer to reduce the construction of conductive network caused by filler agglomeration at higher electric field, but also efficiently reduces the contact surface area in parallel to the electric field between the TO and the polymer. Therefore, the newly designed structure as presented in this work bears relatively high breakdown strength even though the TO has not been modified by any functional group; More importantly, the highly oriented TO nanorod array made dramatic contribution to the higher dielectric constant (~20) and thus improving the electric polarization of the nanocomposite despite of the reduction of the interface polarization.

4. CONCLUSIONS A novel designed nanocomposite, using the TO nanorod array as fillers and PVDF as matrix, was obtained for the first time. Highly oriented TO nanorod array was initially synthesized by the hydrothermal reaction. Subsequently, the polymer was embedded into the nanorod interspace and on the nanorod surface by spin-coated method followed by an annealing and quenching process. And this new structure has demonstrated a dramatically increase in the electric polarization, thus leading to significant improvement on the energy density with the maximum energy density of 10.62 J cm-3 under a breakdown strength of 340 MV m-1 with fillers of h0.18. It is around 3.5 times than that of the PVDF at the same condition. The increment of the energy density almost exceeds most of the previously reported values in similar condition for the TO-based nanocomposite. Particularly, this new method does not need any modification of the surface or some other complicated treating process.

ACS Paragon Plus Environment

Page 18 of 32

Page 19 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Considering the extremely simplicity of process, the material diversity, low-cost, more importantly the dramatically increment in the energy density of 10.62 J cm-3 at 340 MV m-1, it provides another novel potential method to synthesize the inorganic/polymer nanocomposite so as to obtain the improved energy density.

Associated content Supporting information Three ideal models for nanocomposites and temperature dependence of the dielectric constant and loss tangent of bare PVDF and nanocomposites measured from −50 to 130 °C

Acknowledgments This work was financially supported by the RDG007/FST-CHD/2012 at the University of Macau and the Ministry of Sciences and Technology of China through 973-project under Grant (2015CB654601)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

References 1. Dang, Z.M.; Yuan, J.K.; Zha, J.W.; Zhou, T.; Li, S.T.; Hu, G.H., Fundamentals, Processes and Applications of High-permittivity Polymer–matrix Composites. Prog. Mater. Sci. 2012, 57, 660-723. 2. Chen, Q.; Shen, Y.; Zhang, S.; Zhang, Q. M., Polymer-Based Dielectrics with High Energy Storage Density. Annu. Rev. Mater. Res. 2015, 45, 433-458. 3. Baldwin, A. F.; Ma, R.; Mannodi-Kanakkithodi, A.; Huan, T. D.; Wang, C.; Tefferi, M.; Marszalek, J. E.; Cakmak, M.; Cao, Y.; Ramprasad, R.; Sotzing, G. A., Poly(dimethyltin glutarate) as a Prospective Material for High Dielectric Applications. Adv. Mater. 2015, 27, 346-351. 4. Karden, E.; Ploumen, S.; Fricke, B.; Miller, T.; Snyder, K., Energy Storage Devices for Future Hybrid Electric Vehicles. J. Power Sources 2007, 168, 2-11. 5. Dang, Z. M.; Yuan, J. K.; Yao, S. H.; Liao, R. J., Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage. Adv. Mater. 2013, 25 (44), 6334-6365. 6. Huang, X.; Jiang, P., Core-shell Structured High-k Polymer Nanocomposites for Energy Storage and Dielectric Applications. Adv. Mater. 2015, 27 (3), 546-554. 7. Liu, H.; Shen, Y.; Song, Y.; Nan, C. W.; Lin, Y.; Yang, X., Carbon Nanotube Array/polymer Core/shell Structured Composites with High Dielectric Permittivity, Low Dielectric loss, and Large Energy Density. Adv. Mater. 2011, 23 (43), 5104-5108. 8. Wang, Y.; Cui, J.; Yuan, Q.; Niu, Y.; Bai, Y.; Wang, H., Significantly Enhanced Breakdown Strength and Energy Density in Sandwich-Structured Barium Titanate/Poly(vinylidene fluoride) Nanocomposites. Adv. Mater. 2015, 27 (42), 6658-6663. 9. Zhang, X.; Shen, Y.; Zhang, Q.; Gu, L.; Hu, Y.; Du, J.; Lin, Y.; Nan, C. W., Ultrahigh Energy Density of Polymer Nanocomposites Containing BaTiO3@TiO2 Nanofibers by Atomic-scale Interface Engineering. Adv. Mater. 2015, 27 (5), 819-824. 10. Tang, H.; Lin, Y.; Sodano, H. A., Synthesis of High Aspect Ratio BaTiO3Nanowires for High Energy Density Nanocomposite Capacitors. Adv. Energy Mater. 2013, 3 (4), 451-456. 11. Dang, Z.M.; Zhou, T.; Yao, S.H.; Yuan, J.K.; Zha, J.W.; Song, H.T.; Li, J.Y.; Chen, Q.; Yang, W.T.; Bai, J., Advanced Calcium Copper Titanate/Polyimide Functional Hybrid Films with High Dielectric Permittivity. Adv. Mater. 2009, 21 (20), 2077-2082. 12. Li, J.; Seok, S. I.; Chu, B.; Dogan, F.; Zhang, Q.; Wang, Q., Nanocomposites of Ferroelectric Polymers with TiO2 Nanoparticles Exhibiting Significantly Enhanced Electrical Energy Density. Adv. Mater.2009, 21 (2), 217-221. 13. Wang, Y.; Cui, J.; Yuan, Q.; Niu, Y.; Bai, Y.; Wang, H., Significantly Enhanced

ACS Paragon Plus Environment

Page 20 of 32

Page 21 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Breakdown

Strength and

Energy

Density in

Sandwich-Structured

Barium

Titanate/Poly(vinylidene fluoride) Nanocomposites. Adv. Mater. 2015, 27 (42), 6658-6663. 14. Pan, Z.; Yao, L.; Zhai, J.; Shen, B.; Liu, S.; Wang, H.; Liu, J., Excellent Energy Density of Polymer Nanocomposites Containing BaTiO3@Al2O3 Nanofibers Induced by Moderate Interfacial Area. J. Mater. Chem. A 2016, 4, 13259-13264 15. Wang, B.; Liu, L.; Huang, L.; Chi, L.; Liang, G.; Yuan, L.; Gu, A., Fabrication and Origin of High-k Carbon Nanotube/Epoxy Composites with Low Dielectric Loss Through Layer-by-layer Casting Technique. Carbon 2015, 85, 28-37. 16. Tang, H.; Sodano, H. A., Ultra High Energy Density Nanocomposite Capacitors with Fast Discharge Using Ba0.2Sr0.8TiO3 Nanowires. Nano Lett. 2013, 13 (4), 1373-1379. 17. Xie, L.; Huang, X.; Li, B. W.; Zhi, C.; Tanaka, T.; Jiang, P., Core-satellite Ag@BaTiO3 Nanoassemblies for Fabrication of Polymer Nanocomposites with High Discharged Energy Density, High Breakdown Strength and Low Dielectric Loss. Phys. Chem. Chem. Phys. 2013, 15 (40), 17560-17569. 18. Luo, S.; Yu, S.; Sun, R.; Wong, C. P., Nano Ag-deposited BaTiO3 Hybrid Particles as Fillers for Polymeric Dielectric Composites: Toward High Dielectric Constant and Suppressed Loss. ACS Appl. Mater. Interfaces 2014, 6 (1), 176-182. 19. Niu, Y.; Bai, Y.; Yu, K.; Wang, Y.; Xiang, F.; Wang, H., Effect of the Modifier Structure on the Performance of Barium Titanate/Poly(vinylidene fluoride) Nanocomposites for Energy Storage Applications. ACS Appl. Mater. Interfaces 2015, 7 (43), 24168-24176. 20. Paniagua, S. A.; Kim, Y.; Henry, K.; Kumar, R.; Perry, J. W.; Marder, S. R., Surface-initiated Polymerization from Barium Titanate Nanoparticles for Hybrid Dielectric Capacitors. ACS Appl. Mater. Interfaces 2014, 6 (5), 3477-3482. 21. Li, Z.; Fredin, L. A.; Tewari, P.; DiBenedetto, S. A.; Lanagan, M. T.; Ratner, M. A.; Marks, T. J., In Situ Catalytic Encapsulation of Core-Shell Nanoparticles Having Variable Shell Thickness: Dielectric and Energy Storage Properties of High-Permittivity Metal Oxide Nanocomposites. Chem. Mater. 2010, 22 (18), 5154-5164. 22. Zhang, L.; Yuan, S.; Chen, S.; Wang, D.; Han, B.Z.; Dang, Z.M., Preparation and Dielectric Properties of Core–shell Structured Ag@polydopamine/poly(vinylidene fluoride) Composites. Compos. Sci. Technol.2015, 110, 126-131. 23. Tang, H.; Zhou, Z.; Bowland, C. C.; Sodano, H. A., Synthesis of Calcium Copper Titanate (CaCu3Ti4O12) Nanowires with Insulating SiO2 Barrier for Low loss High Dielectric Constant Nanocomposites. Nano Energy 2015, 17, 302-307. 24. Kim, P.; Doss, N. M.; Tillotson, J. P.; Hotchkiss, P. J.; Pan, M. J.; Marder, S. R.;

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Li, J.; Calame, J. P.; Perry, J. W., High Energy Density Nanocomposites Based on Surface-modified BaTiO3 and a Ferroelectric Polymer. ACS Nano 2009, 3 (9), 2581-2592. 25. Xu, N.; Hu, L.; Zhang, Q.; Xiao, X.; Yang, H.; Yu, E., Significantly Enhanced Dielectric Performance of Poly(vinylidene fluoride-co-hexafluoropylene)-based Composites Filled with Hierarchical Flower-like TiO2 Particles. ACS Appl. Mater. Interfaces 2015, 7 (49), 27373-27381. 26. Tang, H.; Sodano, H. A., High Energy Density Nanocomposite Capacitors Using Non-ferroelectric Nanowires. Appl.Phys. Lett. 2013, 102 (6), 06390-06394. 27. Shaohui, L.; Jiwei, Z.; Jinwen, W.; Shuangxi, X.; Wenqin, Z., Enhanced Energy Storage Density in Poly(vinylidene fluoride) Nanocomposites by a Small Loading of Suface-hydroxylated Ba0.6Sr0.4TiO3 Nanofibers. ACS Appl. Mater. Interfaces 2014, 6 (3), 1533-1540. 28. Liu, S.; Xue, S.; Shen, B.; Zhai, J., Reduced Energy Loss in Poly(vinylidene fluoride) Nanocomposites by Filling with a Small Loading of Core-shell Structured BaTiO3/SiO2 nanofibers. Appl.Phy. Lett. 2015, 107 (3), 032907-032911. 29. Xie, L.; Huang, X.; Yang, K.; Li, S.; Jiang, P., “Grafting to” Route to PVDF-HFP-GMA/BaTiO3 Nanocomposites with High Dielectric Constant and High Thermal Conductivity for Energy Storage and Thermal Management Applications. J. Mater. Chem. A 2014, 2 (15), 5244-5251. 30. Tomer, V.; Randall, C. A., High Field Dielectric Properties of Anisotropic Polymer-ceramic Composites. J. Appl. Phys. 2008, 104 (7), 074106-074113. 31. Tomer, V.; Randall, C. A.; Polizos, G.; Kostelnick, J.; Manias, E., High- and Low-field Dielectric Characteristics of Dielectrophoretically Aligned Ceramic/polymer Nanocomposites. J. Appl. Phys. 2008, 103 (3), 034115-034122. 32. Tang, H.; Lin, Y.; Sodano, H. A., Enhanced Energy Storage in Nanocomposite Capacitors through Aligned PZT Nanowires by Uniaxial Strain Assembly. Adv. Energy Mater. 2012, 2 (4), 469-476. 33. Xie, L.; Huang, X.; Huang, Y.; Yang, K.; Jiang, P., Core-shell Structured Hyperbranched Aromatic Polyamide/BaTiO3 Hybrid Filler for Ppoly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) Nanocomposites with the Dielectric Constant Comparable to that of Percolative Composites. ACS Appl. Mater. Interfaces 2013, 5 (5), 1747-1756. 34. Chu, B.; Zhou, X.; Ren, K.; Neese, B.; Lin, M.; Wang, Q.; Bauer, F.; Zhang, Q. M., A Dielectric Polymer with High Electric Energy Density and Fast Discharge Speed. Science 2006, 313 (5785), 334-336.

ACS Paragon Plus Environment

Page 22 of 32

Page 23 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Figure 1 synthetic process of the TNA/PVDF nanocomposite Figure 2 XRD patterns of FTO (a), TO nanorod array (b), and TNA/PVDF composite with h0.18(c) Figure 3 SEM images taken from: (a) top view of the TO nanorod array; (b) cross-sectional view of the TO nanorod array; (c) cross-sectional view of the TNA/PVDF nanocomposite with h0.18; (d) the magnification image of the TNA/PVDF nanocomposite with h0.18; (e) the EDS spectrum of the TO nanorod; (f) and (g) TEM images of the TO nanorod Figure 4 The infrared spectroscopy of TNA/PVDF nanocomposite with h0.18 (red color) and the PVDF spin coated on the FTO (green color). Figure 5 Comparison of measured dielectric constant (a) and loss tangent (b) at the frequency ranging from 0.1 Hz to 1 MHz of TNA/PVDF nanocomposite and bare PVDF Figure 6 (a) Electric displacement−electric field (D−E) loops of TNA/PVDF composite and bare PVDF before breakdown strength; (b) energy density in various electric field measured at 100 Hz; (c) D-E loops of PVDF and TAN nanocomposites with h0.18; (d) Breakdown strength and maximum polarization of the TAN/PVDF nanocomposites and bare PVDF, and the inserted one is the Weibull plots of electric strength Figure 7 Charge-discharge performance of TNA/PVDF nanocomposite with h0.18 at 100 MV m-1: (a) the discharge curve; (b) the discharge energy density. Figure 8 Simulation on the distribution of electric fields (a) and electric flux density(b).

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Table of contents graphic

ACS Paragon Plus Environment

Page 24 of 32

Page 25 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

254x190mm (96 x 96 DPI)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

254x190mm (96 x 96 DPI)

ACS Paragon Plus Environment

Page 26 of 32

Page 27 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

314x444mm (96 x 96 DPI)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

254x190mm (96 x 96 DPI)

ACS Paragon Plus Environment

Page 28 of 32

Page 29 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

314x222mm (96 x 96 DPI)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

314x222mm (96 x 96 DPI)

ACS Paragon Plus Environment

Page 30 of 32

Page 31 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

314x222mm (96 x 96 DPI)

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

314x222mm (96 x 96 DPI)

ACS Paragon Plus Environment

Page 32 of 32