Letter pubs.acs.org/OrgLett
Silver-Catalyzed Decarboxylative Azidation of Aliphatic Carboxylic Acids Yuchao Zhu,† Xinyao Li,† Xiaoyang Wang,† Xiaoqiang Huang,† Tao Shen,† Yiqun Zhang,† Xiang Sun,† Miancheng Zou,† Song Song,*,† and Ning Jiao*,†,‡ †
State Key Laboratory of Natural and Biomimetic Drugs, School of Pharmaceutical Sciences, Peking University, Xue Yuan Road 38, Beijing 100191, China ‡ State Key Laboratory of Elemento-organic Chemistry, Nankai University, Weijin Road 94, Tianjin 300071, China S Supporting Information *
ABSTRACT: The catalytic decarboxylative nitrogenation of aliphatic carboxylic acids for the synthesis of alkyl azides is reported. A series of tertiary, secondary, and primary organoazides were prepared from easily available aliphatic carboxylic acids by using K2S2O8 as the oxidant and PhSO2N3 as the nitrogen source. The EPR experiment sufficiently proved that an alkyl radical process was generated in the process, and DFT calculations further supported the SET process followed by a stepwise SH2 reaction to afford azide product.
A
On the basis of their stability, easy operability, ready availability, and low cost, carboxylic acids are frequently used as raw materials in organic synthesis.6 During the numerous transformations of the carboxylic group to other functional groups, decarboxylative functionalization has become an important strategy to build new C−C or C−X bonds because of the excellent site selectivity of this strategy. For instance, decarboxylative reactions of alkynyl acids,7 α-ketone acids,8 alkenyl acids,9 and benzoic acid derivatives10 to construct new C(sp)−C (or X) or C(sp2)−C bonds have been widely reported. Compared to the above success, the formation of C(sp3)−C (or X) bonds via decarboxylation of aliphatic carboxylic acids remains a challenging subject.11 The decarboxylative halogenation was achieved in many named reactions such as the Hunsdiecker reaction,12 Crisstol−Firth reaction,13 or Kochi reaction.14 However, stoichiometric metal (Ag, Hg, Pb) reagents are indispensable in these named reactions (Scheme 1b). Liu’s group reported the decarboxylative coupling of activated aliphatic acids (Scheme 1c).15 The catalytic decarboxylation of simple aliphatic acids was not achieved until Li’s pioneering work.16 Using catalytic silver as a catalyst, Li and co-workers realized the decarboxylative chlorination,16a fluorination,16b as well as alkynylation16c of various aliphatic carboxylic acids and provided an efficient approach to construct C(sp3)−C (or X) bonds (Scheme 1c). MacMillan’s,17a Xiao’s,17b and Waser’s17c groups employed photoredox chemistry as a powerful tool to realize decarboxylative reactions of aliphatic carboxylic acids (Scheme 1c). By developing the highly efficient Mn catalyst, Groves’ group also reported decarboxylative fluorination with PhIO as oxidant (Scheme 1c).18 Despite the significance of these methods to generate new C(sp3)−C or C(sp3)−halo bonds, the decarbox-
liphatic azides are highly synthetically useful and serve as direct precursors of various N-containing molecules within a single-step transformation.1 Moreover, in drug discovery, lead compounds are designed by introducing the azido moiety to enhance biological activity.2 Additionally, due to the development of “click” cycloaddition, azides have also achieved a significant position in bioconjugation and material science.3 Therefore, chemists are always interested in more convenient and quick methods for the synthesis of aliphatic azides from readily available materials.4 For some prominent examples, Hartwig’s group5a and Groves’ group5b independently developed aliphatic C−H azidation reactions using iron and manganese catalysis, respectively (Scheme 1a). Scheme 1. Decarboxylation of Aliphatic Carboxylic Acids
Received: July 26, 2015
© XXXX American Chemical Society
A
DOI: 10.1021/acs.orglett.5b02155 Org. Lett. XXXX, XXX, XXX−XXX
Letter
Organic Letters ylation of aliphatic carboxylic acid to form a C−N bond has been rarely reported.19 Herein, as continuous efforts in developing azidation reactions,4b,j,l we describe the silver-catalyzed decarboxylative azidation of aliphatic carboxylic acids. A series of primary, secondary, and tertiary azides were prepared by the present approach. The mechanistic studies indicated that radical process was involved in this reaction. Optimization studies using adamantane-1-carboxylic acid (1a) as the model substrate are summarized in Table 1. With AgNO3
Scheme 2. Decarboxylative Azidation of Aliphatic Carboxylic Acids.a
Table 1. Examination of Reaction Conditionsa
entry
catalyst
[N3]
oxidant
solvent
yieldb (%)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
AgNO3 AgNO3 AgNO3 AgNO3 AgNO3 AgF CuBr FeCI2 AgF AgF AgF AgNO3 AgF AgF
NaN3 TMSN3 Togni-N3 EtSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3 PhSO2N3
K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 K2S2O8 PIDA TBHP
DMSO/H2O DMSO/H2O DMSO/H2O DMSO/H2O DMSO/H2O DMSO/H2O DMSO/H2O DMSO/H2O DMSO EA/H2O CH3CN/H2O CH3CN/H2O CH3CN/H2O CH3CN/H2O
nd nd nd 16 18 18 1 2 1 25 72 (75)c 72 (72)c trace nd
a
Reaction conditions: 1 (0.3 mmol), AgF (20 mol %), PhSO2N3 (0.6 mmol), K2S2O8 (0.3 mmol), MeCN/H2O (3 mL:3 mL), stirred at 55 °C under argon atmosphere for 24 h. Isolated yield. bYield was determined by 1H NMR analysis of the crude reaction mixture using Cl2CHCHCl2 as an internal standard. cAgF (30 mol %) was used, and the reaction time was 48 h. dMesSO2N3 was used instead of PhSO2N3.
a Reaction conditions: 1a (0.3 mmol), catalyst (20 mol %), [N3] (0.6 mmol), oxidant (0.3 mmol), solvent (6 mL), stirred at 55 °C under argon atmosphere. bYield was determined by 1H NMR analysis of the crude reaction mixture using Cl2CHCHCl2 as an internal standard. c Isolated yield.
compared to that of tertiary carboxylic acid and were converted to secondary azides 2h−m in 44−64% yields. The 1-azido-4-tertbutylcyclohexane (2n) was obtained in 59% yield (trans/cis = 4.3:1). The decarboxylative azidation of primary carboxylic acids afforded the products with only moderate yields even when 30 mol % of AgF was used as the catalyst. The bromo and phthalamide groups were tolerated under the conditions, affording the desired product 2q,r in 43% and 40% yields, respectively. The decarboxylative azidation of benzoic acid derivative 1s did not work under the present reaction conditions. In order to show the importance of the azidation products, we synthesized memantine 3, whose hydrochloride is an antisenile dementis drug,21 by the reduction of azide 2b in the presence of H2 (Scheme 3).
(20 mol %) as catalyst, K2S2O8 (1 equiv) as oxidant, and DMSO/ H2O (1:1) as solvent, various azide reagents were tested (entries 1−5). When NaN3, TMSN3, or togni-N3 was used as azide source, no product (2a) was detected (entries 1−3). However, 16% yield of 2a was obtained with EtSO2N3 as the azidation reagent (entry 4), and this result encouraged us to test other sulfonyl azide reagents. When EtSO2N3 was changed to PhSO2N3, the yield was improved to 18% (entry 5). Other silver salts such as AgF showed almost the same catalytic efficiency compared to that of AgNO3 (entry 6). With CuBr or FeCl2 as the catalyst, only less than 5% yield of 2a was detected (entries 7−8). When we screened other solvents (entries 9−11), to our delight, the yield increased to 72% in MeCN/H2O (1:1) (entry 11). AgNO3 exhibited similar catalytic behavior as AgF (entry 12), and we chose AgF because it more stable than AgNO3 under light20 (see the Supporting Information). It was demonstrated that K2S2O8 was the best oxidant. When other oxidants such as PIDA or TBHP were used, 2a was detected in very low yield (entries 13 and 14). With AgF as the catalyst and PhSO2N3 as the azide source, we investigated the substrate scope of this useful decarboxylation. Aliphatic carboxylic acids 1a−c bearing an adamantane skeleton reacted efficiently to give the corresponding azides 2a−c in good yields (68−79%) (Scheme 2). The tertiary azides 2d−g were obtained by the decarboxylative azidation of acids 1d−g in good yields. Secondary acids showed slightly lower reactivity
Scheme 3. Synthesis of Memantine
The results in Scheme 2 show that the reactivity of tertiary alkyl acids was higher than that of secondary or primary alkyl acids. Thus, we speculated that a radical process may be involved in the present decarboxylative reaction. To prove our hypothesis, 2 equiv of TEMPO was added to the standard reaction system. As expected, no azide 2a was detected (eq 1). By treatment of 2methyl-5-oxo-5-phenylpentanoic acid (1i) under the standard conditions, the cyclic product 4 was separated in 17% yield along with azidation product 2i (eq 2). The two experiments strongly B
DOI: 10.1021/acs.orglett.5b02155 Org. Lett. XXXX, XXX, XXX−XXX
Letter
Organic Letters
The subsequent N−S bond cleavage through TS3 requires only 8.0 kcal/mol in an activation free energy to give the azidation product. When ethyl radical attacks the alternative internal N of benzenesulfonyl azide, the SH2 undergoes a concerted process without any intermediate to provide azidation product directly. However, this process through TS4 requires an energy barrier of 25.6 kcal/mol, which is higher by 12.7 kcal/mol in energy than TS2. The stepwise SH2 process via TS2 is favored over the concerted one via TS4, which presumably is due to the existence of stable INT. When TMSN3 was used as another azido source, the N-radical intermediate INT is less stable, leading to the higher energy barrier of 19.2 kcal/mol (6.3 kcal/mol higher than PhSO2N3). This difference is consistent with the experimental observations. Based on the experiment results as well as DFT calculations, we proposed a plausible mechanism involving the catalytic generation of carbon radical. As Scheme 4 shows, AgI was first
suggested the generation of carbon radical in the decarboxylative process. Although the control experiments have provided indirect proof for a radical process, we still want to trap the carbon radical through EPR experiments. To our delight, when 1a was exposed under standard conditions for 50 min, we successfully trapped the signal of carbon radical (Figure 1). This experiment directly proves the existence of carbon radical and indicates that the carbon radical is initially generated and then reacts with azide reagent.
Scheme 4. Proposal Mechanism
Figure 1. EPR experiment.
oxidized into AgII intermediate by K2S2O8,23 and then the aliphatic carboxylic acids underwent an SET process to generate the corresponding carbon radical and release CO2. The carbon radical then attacked PhSO2N3 through a stepwise SH2 process that implicated the intermediacy of N-radical INT to afford azide product and sulfonyl radical. The sulfonyl radical underwent a process of releasing SO2 and generating aryl radical which was quenched by either H-abstraction or a reduction−protonation sequence to generate the corresponding aromatic compound (see the Supporting Information). In conclusion, silver-catalyzed decarboxylative nitrogenation of aliphatic carboxylic acids under mild conditions has been developed. Readily available aliphatic carboxylic acids with broad substrate scope were fully compatible to produce a series of tertiary, secondary, and primary organoazides by employing PhSO2N3 as the azide source. EPR experiments provided strong evidence for the SET process to deliver carbon radical and DFT calculations, further revealing the subsequent stepwise SH2 process that implicates the intermediacy of N-radical species to afford the azide product.
To further unravel the mechanism, a DFT calculation investigation into the Ag-catalyzed decarboxylative azidation of propionic acid as the model reaction was carried out (Figure 2).22
Figure 2. DFT-computed energy profiles for Ag-catalyzed decarboxylative azidation.
Ag2S2O8 was in situ generated from AgF and K2S2O8 as the starting point which undergoes O−O bond cleavage to oxidize AgI to AgII, as in the results for the dimer of AgSO4. The oxidation process is endergonic by 8.9 kcal/mol. Once AgII was formed, it reacted with propionic acid through a SET process to deliver propionic acid radical. Although this is endergonic by 10.8 kcal/ mol, it could occur as a reversible process under the condition used. The propionic acid radical undergoes decarboxylation through transition state TS1 almost barrierlessly (ΔG⧧ = 2.4 kcal/mol) to afford ethyl radical. This decarboxylation step is largely endergonic by 13.5 kcal/mol and is considered as an irreversible process. Ethyl radical reacts with benzenesulfonyl azide through two homolytic substitution (SH2) pathways. When ethyl radical attacks the terminal N of benzenesulfonyl azide, the SH2 process is stepwise. The first step corresponds to the C−N bond formation through TS2 with an energy barrier of 12.9 kcal/ mol to deliver the stable N-radical intermediate INT reversibly.
■
ASSOCIATED CONTENT
S Supporting Information *
The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.orglett.5b02155. Experimental procedures, full characterization of products, and copies of NMR spectra (PDF)
■
AUTHOR INFORMATION
Corresponding Authors
*E-mail: ssongchem@gmail.com. *E-mail: jiaoning@pku.edu.cn. Notes
The authors declare no competing financial interest. C
DOI: 10.1021/acs.orglett.5b02155 Org. Lett. XXXX, XXX, XXX−XXX
Letter
Organic Letters
■
Wang, G.; Guo, L.-N.; Liang, Y.-M.; Yang, S.-D. Chem. - Eur. J. 2011, 17, 5516. (10) (a) Kan, J.; Huang, S.; Lin, J.; Zhang, M.; Su, W. Angew. Chem., Int. Ed. 2015, 54, 2199. (b) Tang, J.; Gooßen, L. J. Org. Lett. 2014, 16, 2664. (c) Song, B.; Knauber, T.; Gooßen, L. J. Angew. Chem., Int. Ed. 2013, 52, 2954. (d) Bhadra, S.-y.; Dzik, W. I.; Goossen, L. J. J. Am. Chem. Soc. 2012, 134, 9938. (e) Cornella, J.; Righi, M.; Larrosa, I. Angew. Chem., Int. Ed. 2011, 50, 9429. (f) Dai, J.-J.; Liu, J.-H.; Luo, D.-F.; Liu, L. Chem. Commun. 2011, 47, 677. (g) Sun, Z.; Zhang, J.; Zhao, P. Org. Lett. 2010, 12, 992. (h) Zhang, S.-L.; Fu, Y.; Shang, R.; Guo, Q.-X.; Liu, L. J. Am. Chem. Soc. 2010, 132, 638. (i) Hu, P.; Kan, J.; Su, W.; Hong, M. Org. Lett. 2009, 11, 2341. (j) Sun, Z.; Zhao, P. Angew. Chem., Int. Ed. 2009, 48, 6726. (k) Gooßen, L. J.; Deng, G.; Levy, L. M. Science 2006, 133, 662. (l) Forgione, P.; Brochu, M.-C.; St-Onge, M.; Thesen, K. H.; Bailey, M. D.; Bilodeau, F. J. Am. Chem. Soc. 2006, 128, 11350. (m) Tanaka, D.; Romeril, S. P.; Myers, A. G. J. Am. Chem. Soc. 2005, 127, 10323. (n) Nguyen, T. B.; Ermolenko, L.; Corbin, M.; Al-Mourabit, A. Org. Chem. Front. 2014, 1, 1157. (11) (a) Zuo, Z.; MacMillan, D. W. C. J. Am. Chem. Soc. 2014, 136, 5257. (b) Zhang, C.; Seidel, D. J. Am. Chem. Soc. 2010, 132, 1798. (c) Bi, H.-P.; Zhao, L.; Liang, Y.-M.; Li, C.-J. Angew. Chem., Int. Ed. 2009, 48, 792. (d) Yin, L.; Kanai, M.; Shibasaki, M. J. Am. Chem. Soc. 2009, 131, 9610. (12) Hunsdiecker, H.; Hunsdiecker, C. Ber. Dtsch. Chem. Ges. B 1942, 75B, 291. (13) Cristol, S. J.; Firth, W. C., Jr. J. Org. Chem. 1961, 26, 280. (14) (a) Kochi, J. K. J. Am. Chem. Soc. 1965, 87, 2500. (b) Kochi, J. K. J. Org. Chem. 1965, 30, 3265. (c) Kochi, J. K. Science 1967, 155, 415. (15) (a) Shang, R.; Yang, Z.-W.; Wang, Y.; Zhang, S.-L.; Liu, L. J. Am. Chem. Soc. 2010, 132, 14391. (b) Shang, R.; Ji, D.-S.; Chu, L.; Fu, Y.; Liu, L. Angew. Chem., Int. Ed. 2011, 50, 4470. (c) Shang, R.; Huang, Z.; Chu, L.; Fu, Y.; Liu, L. Org. Lett. 2011, 13, 4240. (d) Shang, R.; Huang, Z.; Xiao, X.; Lu, X.; Fu, Y.; Liu, L. Adv. Synth. Catal. 2012, 354, 2465. (16) (a) Wang, Z.; Zhu, L.; Yin, F.; Su, Z.; Li, Z.; Li, C. J. Am. Chem. Soc. 2012, 134, 4258. (b) Yin, F.; Wang, Z.; Li, Z.; Li, C. J. Am. Chem. Soc. 2012, 134, 10401. (c) Liu, X.; Wang, Z.; Cheng, X.; Li, C. J. Am. Chem. Soc. 2012, 134, 14330. (17) (a) Ventre, S.; Petronijevic, F. R.; MacMillan, D. W. C. J. Am. Chem. Soc. 2015, 137, 5654. (b) Zhou, Q.-Q.; Guo, W.; Ding, W.; Wu, X.; Chen, X.; Lu, L.-Q.; Xiao, W.-J. Angew. Chem., Int. Ed. 2015, 54, 11196. (c) Le Vaillant, F.; Courant, T.; Waser, J. Angew. Chem., Int. Ed. 2015, 54, 11200. (18) Huang, X.; Liu, W.; Hooker, J. M.; Groves, J. T. Angew. Chem., Int. Ed. 2015, 54, 5241. (19) During submission, a significant Ag-catalyzed decarboxylative azidation of aliphatic carboxylic acids was published: Liu, C.; Wang, X.; Li, Z.; Cui, L.; Li, C. J. Am. Chem. Soc. 2015, 137, 9820. (20) Wu, Q.-S.; Cui, Y.; Yang, L.-M.; Zhang, G.-Y.; Gao, D.-Z. Sep. Purif. Technol. 2015, 142, 168. (21) Ataie, A.; Ataee, R.; Shadifar, M.; Shahabi, S.; Aghajanpour, S. M.; hosseinpour, Y. Inter. J. Mol. Cell. Med. 2012, 1, 145. (22) All of the geometry optimizations and frequency calculations were performed at the (U)M06//(U)B3LYP level in Gaussian 09. Frisch, M. J.et al. Gaussian 09; Gaussian, Inc.: Wallingford, CT, 2009. Computational details and references are given in the Supporting Information. (23) (a) Anderson, J. M.; Kochi, J. K. J. Am. Chem. Soc. 1970, 92, 1651. (b) Anderson, J. M.; Kochi, J. K. J. Org. Chem. 1970, 35, 986. (c) Patel, N. R.; Flowers, R. A. J. Org. Chem. 2015, 80, 5834.
ACKNOWLEDGMENTS Financial support from the National Basic Research Program of China (973 Program) (Grant No. 2015CB856600), the National Natural Science Foundation of China (Nos. 21325206 and 21172006), and the National Young Top-notch Talent Support Program are greatly appreciated.
■
REFERENCES
(1) For reviews on organoazides, see: (a) Bräse, S.; Gil, C.; Knepper, K.; Zimmermann, V. Angew. Chem., Int. Ed. 2005, 44, 5188. (b) Minozzi, M.; Nanni, D.; Spagnolo, P. Chem. - Eur. J. 2009, 15, 7830. (c) Bräse, S.; Banert, K. Organic Azides: Syntheses and Applications; Wiley-VCH: Weinheim, 2010. (d) Driver, T. G. Org. Biomol. Chem. 2010, 8, 3831. (e) Lapointe, G.; Kapat, A.; Weidner, K.; Renaud, P. Pure Appl. Chem. 2012, 84, 1633. (f) Chiba, S. Synlett 2012, 23, 21. (2) (a) Huryn, D. M.; Okabe, M. Chem. Rev. 1992, 92, 1745. (b) Kolb, H. C.; Sharpless, K. B. Drug Discovery Today 2003, 8, 1128. (3) For click chemistry, see: (a) Kolb, H. C.; Finn, M. G.; Sharpless, K. B. Angew. Chem., Int. Ed. 2001, 40, 2004. (b) Rostovtsev, V. V.; Green, L. G.; Fokin, V. V.; Sharpless, K. B. Angew. Chem., Int. Ed. 2002, 41, 2596. (c) Thirumurugan, P.; Matosiuk, D.; Jozwiak, K. Chem. Rev. 2013, 113, 4905. (4) For some recent azidation reactions, see: (a) Lubriks, D.; Sokolovs, I.; Suna, E. J. Am. Chem. Soc. 2012, 134, 15436. (b) Tang, C.; Jiao, N. J. Am. Chem. Soc. 2012, 134, 18924. (c) Deng, Q.; Bleith, T.; Wadepohl, H.; Gade, L. H. J. Am. Chem. Soc. 2013, 135, 5356. (d) Song, W.; Kozhushkov, S. I.; Ackermann, L. Angew. Chem., Int. Ed. 2013, 52, 6576. and references therein (e) Xie, F.; Qi, Z.; Li, X. Angew. Chem., Int. Ed. 2013, 52, 11862. (f) Vita, M. V.; Waser, J. Org. Lett. 2013, 15, 3246. (g) Liu, Z.; Liu, J.; Zhang, L.; Liao, P.; Song, J.; Bi, X. Angew. Chem., Int. Ed. 2014, 53, 5305. (h) Klahn, P.; Erhardt, H.; Kotthaus, A.; Kirsch, S. F. Angew. Chem., Int. Ed. 2014, 53, 7913. (i) Galligan, M. J.; Akula, R.; Ibrahim, H. Org. Lett. 2014, 16, 600. (j) Yin, H.; Wang, T.; Jiao, N. Org. Lett. 2014, 16, 2302. (k) Fan, Y.; Wan, W.; Ma, G.; Gao, W.; Jiang, H.; Zhu, S.; Hao, J. Chem. Commun. 2014, 50, 5733. (l) Sun, X.; Li, X.; Song, S.; Zhu, Y.; Liang, Y.-F.; Jiao, N. J. Am. Chem. Soc. 2015, 137, 6059. (5) (a) Sharma, A.; Hartwig, J. F. Nature 2015, 517, 600. (b) Huang, X.; Bergsten, T. M.; Groves, J. T. J. Am. Chem. Soc. 2015, 137, 5300. (6) For reviews on decarboxylative reactions, see: (a) Dzik, W. I.; Lange, P. L.; Gooßen, L. J. Chem. Sci. 2012, 3, 2671. (b) Shang, R.; Liu, L. Sci. China: Chem. 2011, 54, 1670. (c) Weaver, J. D.; Recio, A.; Grenning, A. J.; Tunge, J. A. Chem. Rev. 2011, 111, 1846. (d) Rodríguez, N.; Gooßen, L. J. Chem. Soc. Rev. 2011, 40, 5030. (e) Gooßen, L. J.; Rodríguez, N.; Gooßen, K. Angew. Chem., Int. Ed. 2008, 47, 3100. (7) (a) Zhang, P.; Zhang, L.; Gao, Y.; Xu, J.; Fang, H.; Tang, G.; Zhao, Y. Chem. Commun. 2015, 51, 7839. (b) Sun, F.; Gu, Z. Org. Lett. 2015, 17, 2222. (c) Hu, G.; Gao, Y.; Zhao, Y. Org. Lett. 2014, 16, 4464. (d) Jia, W.; Jiao, N. Org. Lett. 2010, 12, 2000. (e) Pan, D.; Zhang, C.; Ding, S.; Jiao, N. Eur. J. Org. Chem. 2011, 4751. (f) Yu, M.; Pan, D.; Chen, W.; Jiao, N. Tetrahedron Lett. 2010, 51, 1287. (g) Moon, J.; Jang, M.; Lee, S. J. Org. Chem. 2009, 74, 1403. (h) Zhao, D.; Gao, C.; Su, X.; He, Y.; You, J.; Xue, Y. Chem. Commun. 2010, 46, 9049. (i) Zhang, W.; Zhang, X.; Li, J. J. Org. Chem. 2010, 75, 5259. (j) Feng, C.; Loh, T. Chem. Commun. 2010, 46, 4779. (8) (a) Tan, H.; Li, H.; Ji, W.; Wang, L. Angew. Chem., Int. Ed. 2015, 54, 8374. (b) Li, H.; Li, P.; Tan, H.; Wang, L. Chem. - Eur. J. 2013, 19, 14432. (c) Kim, M.; Park, J.; Sharma, S.; Kim, A.; Park, E.; Kwak, J. H.; Jung, Y. H.; Kim, I. S. Chem. Commun. 2013, 49, 925. (d) Li, H.; Li, P.; Wang, L. Chem. Commun. 2013, 49, 9170. (e) Fang, P.; Li, M.-Z.; Ge, H.-B. J. Am. Chem. Soc. 2010, 132, 11898. (f) Li, M.; Wang, C.; Ge, H. Org. Lett. 2011, 13, 2062. (g) Gooßen, L. J.; Rudolphi, F.; Oppel, C.; Rodríguez, N. Angew. Chem., Int. Ed. 2008, 47, 3043. (9) (a) Huang, H.; Jia, K.; Chen, Y. Angew. Chem., Int. Ed. 2015, 54, 1881. (b) Singh, R.; Allam, B. K.; Singh, N.; Kumari, K.; Singh, S. K.; Singh, K. N. Org. Lett. 2015, 17, 2656. (c) Li, S.; Li, X.; Yang, F.; Wu, Y. Org. Chem. Front. 2015, 2, 1076. (d) Wu, Y.; Liu, L.; Yan, K.; Xu, P.; Gao, Y.; Zhao, Y. J. Org. Chem. 2014, 79, 8118. (e) Hu, J.; Zhao, N.; Yang, B.; D
DOI: 10.1021/acs.orglett.5b02155 Org. Lett. XXXX, XXX, XXX−XXX