Smartphone Nanocolorimetric Determination of Hydrogen Sulfide in

Apr 15, 2019 - ... Engineering Data Series, Industrial & Engineering Chemistry Fundamentals .... In this work, the sensitive detection of hydrogen sul...
0 downloads 0 Views 915KB Size
Subscriber access provided by UNIV OF LOUISIANA

Article

Smartphone Nano-Colorimetric Determination of Hydrogen Sulfide in Biosamples After Silver-Gold Core-Shell Nanoprism-Based Headspace Single-Drop Microextraction Sheng Tang, Tong Qi, Dasha Xia, Mengchan Xu, Mengyuan Xu, Anni Zhu, Wei Shen, and Hian Kee Lee Anal. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.analchem.9b00255 • Publication Date (Web): 15 Apr 2019 Downloaded from http://pubs.acs.org on April 15, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

Smartphone Nano-Colorimetric Determination of Hydrogen Sulfide in Biosamples After Silver-Gold Core-Shell Nanoprism-Based Headspace Single-Drop Microextraction Sheng Tanga,*, Tong Qia, Dasha Xia a, Mengchan Xua, Mengyuan Xua, Anni Zhua, Wei Shena, Hian Kee Leeb,c,d,* aSchool

of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu Province, PR China bDepartment of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore cNational University of Singapore Environmental Research Institute, T-Lab Building #02-01, 5A Engineering Drive 1, Singapore 117411, Singapore dTropical Marine Science Institute, National University of Singapore, S2S Building, 18 Kent Ridge Road, Singapore 119227, Singapore

Corresponding authors’ e-mail addresses: [email protected] (S. Tang); [email protected] (H.K. Lee) Abstract: In this work, sensitive detection of hydrogen sulfide (H2S) was realized at low cost and high efficiency through the application of silver-gold core-shell nanoprism (Ag@Au-np) combined with headspace-single drop microextraction (HS-SDME). After SDME, smartphone nano-colorimetry (SNC), with the aid of a smartphone camera and a colour picker software, was used to detect and quantify the H2S. The method took advantage of the inhibition of the ultraviolet-visible (UV-vis) signal caused by H2S etching of the Ag@Au-np pre-added to the SDME solvent, to measure the H2S concentration. The coating of the gold layer not only ensured the high stability of the nanomaterial, but also enhanced the selectivity towards H2S. The HS-SDME method was simple to process and only required a droplet of solvent for analysis to be realized. This HS-SDME-SCN approach exhibited a calibration graph linearity of between 0.1 and 100 μM, and a limit of detection of 65 nM. (relative standard deviations of N % (n=3)