Solubility of Acesulfame Potassium in Ethanol+ Water and Methanol+

Feb 29, 2008 - ... load: https://cdn.mathjax.org/mathjax/contrib/a11y/accessibility-menu.js .... + Water and Methanol + Water Systems from (275.84 to ...
0 downloads 0 Views 48KB Size
854

J. Chem. Eng. Data 2008, 53, 854–856

Solubility of Acesulfame Potassium in Ethanol + Water and Methanol + Water Systems from (275.84 to 322.90) K Li Gao,* Jing-kang Wang, and Hong-xun Hao School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, People’s Republic of China

The solubilities of acesulfame potassium in pure solvents and mixed solvents were measured using a synthetic method. The laser monitoring observation technique was used to determine the disappearance of the solid phase in a solid + liquid mixture. All data were measured at atmospheric pressure and temperatures ranging from (275.84 to 322.90) K. The effect of solvent composition and temperature on the solubility was discussed. The experimental data were correlated with an empirical equation.

Introduction Acesulfame potassium, a potassium salt of 3,4-dihydro-6methyl-1,2,3-oxathiazine-4-one-2,2-dioxide, is a high-intensity calorie-free artificial sweetener. It is a white crystalline powder with a molecular formula of C4H4NO4KS and a molecular weight of 201.24. It is not metabolized by the body and is excreted unchanged. It was approved for use by the FDA in 1988 and has been evaluated 8 times for safety. Acesulfame potassium is about 200 times sweeter than sucrose or about half as sweet as aspartame or saccharin. Its taste is generally considered to be good. Under most processing and storage conditions used for foods and beverages, it seems to be virtually stable. No adverse reactions or unacceptable losses in sweetness have been observed. Acesulfame potassium is currently used in food, beverage, oral hygiene, and pharmaceutical products in about 90 countries. It can be used alone or in combination with other sweeteners (i.e., aspartame).1,2 In industrial manufacturing, acesulfame potassium is crystallized from aqueous solution in the purification step. Ethanol or methanol solvent may be used as washing liquor to wash filter cake. To design an optimized crystallization process and crystallizer, it is necessary to know its solubility in pure water, ethanol, methanol, and their mixed solvents. However, from a review of the literature on acesulfame potassium, it was found that only rough data in pure water and ethanol were available. No experimental solubility data of acesulfame potassium in pure methanol and ethanol + water or methanol + water solvents have been reported. The scarcity of basic solubility data hinders progress in the design of production flow processes or the expansion of production capacity. Therefore, in this work, the solubilities of acesulfame potassium in pure water, ethanol, methanol, and ethanol + water and methanol + water mixed solvents were measured using a synthetic method. As we know, methods of measuring the solubility of a solid in a liquid mixture can be classified as analytical and synthetic. Compared with the analytical method, the synthetic method is much faster and more readily produces solubility data. The synthetic method involves weighing or measuring the individual components to obtain a system with a known composition; the state in which the solid phase just disappears is then determined for this system. * To whom correspondence should be addressed. E-mail: lily0827@ 163.com. Fax: 0086-22-27374971.

The disappearance of the solid phase can be achieved either by a change in the temperature or by the addition of a known amount of solvent.3–10 In this work, the last crystal disappearance method, a synthetic method, was used to determine the solubility data of acesulfame potassium in different solvents. The disappearance of the solid phase is achieved by changing the temperature. The effects of temperature and solvent composition on the solubility of acesulfame potassium were studied. The experimental solubility data were correlated with an empirical equation.

Experimental Section Materials. Acesulfame potassium, a white crystal with a melting point of (229 ( 0.5) °C, was supplied by Jiangsu Haobo Co., Ltd. It was recrystallized twice from aqueous solution. It was dried in a vacuum oven for 12 h at 50 °C and stored in a desiccator. Its mass fraction purity, determined by HPLC, is higher than 0.995. The ethanol used is analytical reagent grade from Tianjin Chemical Reagent Co. of China. Its mass fraction purity was higher than 0.998, as determined by gas chromatography. Distilled–deionized HPLC-grade water was used. Apparatus and Procedure. The solubility of acesulfame potassium was measured by the last crystal disappearance method. The laser monitoring observation technique was used to determine the disappearance of the last crystal in the solid + liquid mixture. The experimental apparatus consists of an equilibrium cell, a magnetic stirrer, a thermostat, and a laser monitoring system. The laser monitoring system consists of a laser generator, a photoelectric transformer, and a recorder. The equilibrium cell is a cylindrical double-jacketed glass vessel (60 mL). It was maintained at the desired temperature through circulating water through the outer jacket from the thermostat. A condenser was fitted to reduce the solvent’s evaporation. A thermometer with an uncertainty of ( 0.01 K was used to determine the temperature of the system. The magnetic stirrer (type CJJ79-1) was used to stir the mixture of solute and solvent in the vessel. A laser beam generated by the laser generator was used to observe the dissolving process. The signal penetrating through the vessel was transferred to the recorder by the photoelectric transformer. The masses of solute and the solvent were weighed using an electronic analytic balance (type AB204-N) with an uncertainty of ( 0.0001 g. The maximum weighing mass of the balance

10.1021/je700713q CCC: $40.75  2008 American Chemical Society Published on Web 02/29/2008

Journal of Chemical & Engineering Data, Vol. 53, No. 3, 2008 855 Table 1. Solubility of Acesulfame Potassium in Pure Solvents water

methanol

ethanol

T/K

102Xexptl

102Xcalcd

T/K

103Xexptl

103Xcalcd

T/K

104Xexptl

104Xcalcd

277.98 281.23 284.73 288.35 294.90 298.02 301.03 304.01 307.07 310.24 313.53 317.30 322.30

1.5120 1.6726 1.8612 2.0718 2.4935 2.7061 2.9203 3.1422 3.3773 3.6288 3.8969 4.1910 4.7443

1.5895 1.7319 1.8978 2.0841 2.4624 2.6631 2.8703 3.0893 3.3295 3.5955 3.8914 4.2567 4.7878

277.70 281.79 286.10 290.39 294.20 298.51 302.21 307.80 311.39 315.47 319.30 322.80

1.5585 1.7293 1.8883 2.0489 2.2217 2.3752 2.5555 2.8831 3.1287 3.4064 3.7142 4.0093

1.5712 1.7063 1.8623 2.0328 2.1981 2.4022 2.5932 2.9121 3.1380 3.4166 3.7010 3.9819

277.10 282.39 287.47 292.30 297.55 302.65 307.90 312.93 317.87 322.90

1.2259 1.5369 1.7592 2.0000 2.2600 2.5865 2.9968 3.9632 4.9616 6.3400

1.0389 1.2777 1.5573 1.8782 2.3002 2.7980 3.4196 4.1399 4.9895 6.0275

Table 2. Solubility of Acesulfame Potassium in Ethanol (1) + Water (2) Mixed Solventsa w1 ) 0.19897

w1 ) 0.39755

102Xexptl

102Xcalcd

T/K

102Xexptl

102Xcalcd

T/K

102Xexptl

102Xcalcd

278.11 282.97 286.79 290.14 293.87 297.73 301.76 306.16 310.58 314.97 318.63 321.64

0.94829 1.1857 1.4024 1.6243 1.8710 2.1548 2.4824 2.8536 3.2609 3.6800 4.0388 4.3549

0.94768 1.1900 1.4067 1.6160 1.8701 2.1559 2.4780 2.8553 3.2586 3.6798 4.0438 4.3501

277.70 280.29 285.70 289.87 293.75 297.05 300.72 304.06 307.47 311.42 315.31 321.77

0.76145 0.92190 1.1525 1.3596 1.5660 1.7755 1.9958 2.2274 2.4849 2.7779 3.0949 3.6591

0.80069 0.90195 1.1407 1.3505 1.5660 1.7646 2.0015 2.2315 2.4796 2.7827 3.0962 3.6449

275.84 281.04 286.03 290.05 293.77 297.75 301.75 306.09 310.91 315.70 320.95

0.64122 0.83043 1.0191 1.1816 1.3542 1.5450 1.7681 2.0274 2.3290 2.6653 3.0528

0.73655 0.87707 1.0349 1.1808 1.3326 1.5148 1.7210 1.9738 2.2947 2.6609 3.1237

w1 ) 0.59933 T/K 278.20 283.50 287.39 291.45 295.43 299.36 303.67 307.57 311.87 316.72 321.87 a

w1 ) 0.50016

T/K

3 exptl

w1 ) 0.70031 3 calcd

10 X

10 X

6.1391 7.5936 8.7623 9.9918 11.340 12.921 14.754 16.575 18.774 21.562 24.918

6.2443 7.5710 8.6782 9.9645 11.365 12.892 14.743 16.586 18.817 21.598 24.877

T/K 278.95 285.06 288.70 292.13 295.88 299.90 303.69 307.53 311.35 315.45 321.68

3 exptl

w1 ) 0.79947 3 calcd

10 X

10 X

4.4003 5.3059 6.0091 6.7515 7.6551 8.6631 9.7226 10.930 12.352 14.032 16.886

4.3721 5.3534 6.0307 6.7404 7.6039 8.6420 9.7387 10.979 12.357 14.011 16.918

T/K

103Xexptl

103Xcalcd

281.73 288.50 294.15 298.60 302.75 306.41 309.55 313.11 315.85 318.33 321.27

1.9686 2.8449 3.4415 4.0458 4.6720 5.2486 5.9089 6.6131 7.1894 7.7886 8.4450

2.2276 2.8235 3.4346 4.0029 4.6128 5.2232 5.8075 6.5452 7.1727 7.7897 8.5865

w1 is the mass fraction of ethanol in the mixed solvents in the table.

Table 3. Solubility of Acesulfame Potassium in Methanol (1) + Water (2) Mixed Solventsa w1 ) 0.20144

w1 ) 0.39899

w1 ) 0.60080

w1 ) 0.79817

T/K

103Xexptl

103Xcalcd

T/K

103Xexptl

103Xcalcd

T/K

103Xexptl

103Xcalcd

T/K

103Xexptl

103Xcalcd

277.55 282.10 286.30 289.55 292.95 296.46 299.15 302.59 305.97 309.81 314.43 318.50 322.40

9.1088 11.173 13.161 15.138 17.218 19.383 21.512 23.745 26.333 29.684 33.904 37.984 41.688

10.372 12.023 13.769 15.285 17.042 19.059 20.758 23.143 25.740 29.030 33.520 38.019 42.867

278.70 283.67 286.85 291.25 295.69 300.17 304.39 308.00 311.60 315.05 318.19 321.45

7.9299 9.5289 10.971 12.888 15.177 17.677 20.337 22.713 25.259 27.839 30.458 33.180

8.5410 10.090 11.215 12.965 14.987 17.323 19.830 22.239 24.910 27.748 30.590 33.826

277.85 281.50 286.65 290.15 294.05 297.65 300.57 304.45 307.97 311.63 315.80 319.83 321.72

5.4923 6.5721 7.7806 8.8983 10.092 11.350 12.395 13.874 15.606 17.598 19.855 22.281 23.873

5.9062 6.6516 7.8603 8.8001 9.9753 11.193 12.285 13.896 15.531 17.427 19.858 22.514 23.873

278.63 283.06 287.77 291.93 295.55 299.25 301.99 306.05 309.50 313.09 316.50 320.40 322.30

3.0102 3.6636 4.2471 4.7723 5.3228 5.9259 6.4764 7.1803 7.9785 8.8693 9.8527 10.957 11.529

3.1302 3.6044 4.1780 4.7508 5.3051 5.9305 6.4352 7.2536 8.0205 8.8945 9.8023 10.941 11.537

a

w1 is the mass fraction of methanol in the mixed solvents in the table.

was 210 g. The estimated uncertainty in the mole fraction was less than 0.001. The solubilities of acesulfame potassium in pure water, ethanol, methanol, and ethanol + water and methanol + water mixed solvents were measured as follows. Predetermined amounts of solute and solvents were placed into the jacketed vessel. At the beginning of the experiment, the solute was

excessive. So some undissolved particles of acesulfame potassium existed. The mixture was heated slowly at rates of less than 2 K · h-1 with continuous stirring. In the early stage of the experiment, the laser beam was blocked by the undissolved particles of acesulfame potassium in the solution, so the intensity of the laser beam penetrating the vessel was low. The intensity increased gradually along with the increase in the amount of

856 Journal of Chemical & Engineering Data, Vol. 53, No. 3, 2008 Table 4. Parameters of Equation 2 for Acesulfame Potassium in Different Solventsa methanol (1) + water (2) mixed solvents 10A 103B C 104 rmsd

water

methanol

ethanol

w1 ) 0.20144

w1 ) 0.39899

w1 ) 0.60080

w1 ) 0.79817

-5.2946 0.30600 8.4768 4.5375

-9.3347 2.3258 13.955 0.22915

-12.799 2.4153 19.577 0.22639

-9.6397 1.7181 15.222 6.8456

-8.1764 1.0127 13.031 4.0443

-10.013 1.8447 15.703 1.6011

-5.7833 0.072535 9.2020 0.52496

ethanol (1) + water (2) mixed solvents 10A 103B C 104 rmsd a

w1 ) 0.19897

w1 ) 0.39755

w1 ) 0.50016

w1 ) 0.59933

w1 ) 0.70031

w1 ) 0.79947

20.986 -12.194 -30.326 0.39280

17.857 -10.752 -25.714 1.4441

-7.7294 0.83336 12.342 4.6917

1.7197 -3.3733 -1.8030 0.48592

-7.5080 0.72271 11.908 0.32158

-9.9837 1.6034 15.607 0.99446

w1 is the mass fraction of solvent (1) in the mixed solvents in the table.

acesulfame potassium dissolved. When the last particles of the solute disappeared completely, the intensity of the laser beam penetrating the vessel reached a maximum. The temperature was recorded as the saturation temperature of the acesulfame potassium solution at a given composition. The mass fraction solubility was calculated. The saturated mole fraction solubility of the solute (xA) in binary ethanol (methanol) + water solvent mixtures can be obtained as follows

xA )

mA ⁄ MA mA ⁄ MA + mB ⁄ MB + mC ⁄ MC

(1)

where mA, mB, and mC are the masses of solute, ethanol (methanol), and water, respectively. MA, MB, and MC are the molecular weights of solute, ethanol (methanol), and water, respectively. The same solubility experiment was performed three times.

Results and Discussion The experimental mole fraction solubility data of acesulfame potassium in pure water, ethanol, and methanol are presented in Table 1. The solubilities of acesulfame potassium in ethanol + water and methanol + water mixed solvents are presented in Table 2 and Table 3, respectively. The temperature dependence of acesulfame potassium solubility in different solvents was correlated by the modified Apelblat equation11

ln x ) A + B ⁄ T (K) + C ln T (K)

(2)

where x is the mole fraction solubility of acesulfame potassium; T (K) is the absolute temperature, and A, B, and C are the model parameters. The calculated solubility values of acesulfame potassium are also given in Tables 1 to 3. The values of parameters A, B, and C and root-mean-square deviations (rmsd) are listed in Table 4. The rmsd is defined as

rmsd )

{

N



}

1 (Xcalcd - Xiexptl)2 N i)1 i

1⁄2

(3)

where N is the number of experimental points; Xicalcd represents the solubility calculated from eq 2; and Xiexptlrepresents the experimental solubility values. From data listed in Tables 1 to 3, it can be seen that the solubility of acesulfame potassium in various solvents increases with increasing temperature. The solubility of acesulfame potassium in pure water is higher than in other pure solvents and mixed solvents. The solubility of acesulfame potassium in

pure ethanol is the minimum. In the ethanol + water and methanol + water mixed solvents, the existence of ethanol or methanol has an apparent influence on the solubility of acesulfame potassium. The solubility of acesulfame potassium in ethanol + water and methanol + water mixed solvents decreases with increasing ethanol and methanol content at constant temperature. According to the principle of “like dissolves like”, acesulfame potassium which is a kind of strong polar solute dissolves well in strong polar solvent. The polar order of solvent is water > methanol > ethanol, so the solubility of acesulfame potassium decreases as one moves from water to methanol and ethanol. From Table 1 to 3, it was found that the calculated solubility of acesulfame potassium showed good agreement with the experimental values. This shows that eq 2 is appropriate to describe the temperature dependence of the solubility of acesulfame potassium.

Literature Cited (1) Tian, L. T.; Tian, N. S. The Fourth Generation Artificial Sweetener Acesulfame Potassium. Food Sci. 1998, 19 (8), 29–32. (2) Von Rymon Lipinski, G.-W. The new intense sweetener AcesulfameK. Food Chem. 1985, 16 (3–4), 259–269. (3) Ren, G. B.; Wang, J. K.; Li, G. Z. Solubility of paroxetine hydrochloride hemi-hydrate in (water + acetone). J. Chem. Thermodyn. 2005, 37, 860–865. (4) Roberts, K. L.; Rousseau, R. W.; Teja, A. S. Solubility of long-chain n-alkanes in heptane between 280 and 350 K. J. Chem. Eng. Data 1994, 39, 793–795. (5) Jiang, Q.; Gao, G. H.; Yu, Y. X.; Qin, Y. Solubility of sodium dimethyl isophthalate-5-sulfonate in water and in water + methanol containing sodium sulfate. J. Chem. Eng. Data 2000, 45, 292–294. (6) Li, X. N.; Yin, Q. X.; Chen, W.; Wang, J. K. Solubility of hydroquinone in different solvents from 276.65 to 345.10 K. J. Chem. Eng. Data 2006, 51, 127–129. (7) Wu, J. H.; Wang, J. K. Solubility of cefazolin sodium pentahydrate in aqueous 2-propanol mixtures. J. Chem. Eng. Data 2005, 50, 980– 982. (8) Ren, B. Z.; Hou, C. H.; Chong, H. G. Solubility of o-Phthalic Acid in Methanol + Water and Methanol + Butyl Acetate from (295.87 to 359.75) K. J. Chem. Eng. Data 2006, 51, 2022–202. (9) Roberts, K. L.; Rousseau, R. W.; Teja, A. S. Solubility of long-chain n-alkanes in heptane between 280 and 350 K. J. Chem. Eng. Data 1994, 39, 793–795. (10) Jiang, Q.; Gao, G. H.; Yu, Y. X.; Qin, Y. Solubility of sodium dimethyl isophthalate-5-sulfonate in water and in water + methanol containing sodium sulfate. J. Chem. Eng. Data 2000, 45, 292–294. (11) Apelblat, A.; Manzurola, E. Solubilities of o-acetylsalicylic, 4-aminosalic, 3,5-dinitrosalicylic, and p-toluic acid, and magnesiumDLaspartate in water from T ) (278 to 348) K. J. Chem. Thermodyn. 1999, 31, 85–91. Received for review December 4, 2007. Accepted January 9, 2008.

JE700713Q