Solution-Processed CuInS2-Based White QD-LEDs with Mixed Active

Mar 8, 2017 - The implemented materials were selected in a way to suppress the FRET between them, allowing efficient devices with a balanced white ...
0 downloads 0 Views 1MB Size
Subscriber access provided by UB + Fachbibliothek Chemie | (FU-Bibliothekssystem)

Article 2

Solution-processed CuInS – based white QDLEDs with mixed active layer architecture Svenja Wepfer, Julia Frohleiks, A-Ra Hong, Ho Seong Jang, Gerd Bacher, and Ekaterina Nannen ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b15660 • Publication Date (Web): 08 Mar 2017 Downloaded from http://pubs.acs.org on March 9, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Solution-processed CuInS2 – based white QD-LEDs with mixed active layer architecture Svenja Wepfer

1,2

, Julia Frohleiks

1,2

, A-Ra Hong 3, Ho Seong Jang 3, Gerd Bacher, 2,

Ekaterina Nannen* 1,2 1: Research Group „Solid State Lighting“, NanoEnergieTechnikZentrum, University Duisburg-Essen, 47057 Duisburg, Germany 2: Werkstoffe der Elektrotechnik and CENIDE, University Duisburg-Essen, 47057 Duisburg, Germany 3: Materials Architecturing Research Center, Korea Institute of Science and Technology (KIST), 5, Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Republic of Korea

KEYWORDS quantum dots, white, light emitting devices, mixed layer, core/shell

ABSTRACT Colloidal quantum dots (QDs) are attractive candidates for future lighting technology. However, in contrast to display applications, the realization of balanced white lighting devices remains conceptually challenging. Here we demonstrate two-component white light-emitting QD-LEDs with high color rendering indices (CRI) up to 78. The implementation of orange CuInS2/ZnS (CIS/ZnS) QDs with a broad emission and high quantum yield together with blue ZnCdSe/ZnS QDs in a mixed approach allowed white light emission with low blue QD content. The devices reveal only a small color drift in a wide operation voltage range. The correlated color temperature (CCT) could be adjusted between 2200 and 7200°K (from warm

1 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 26

white to cold white) by changing the volume ratio between orange and blue QDs (1:0.5 and 1:2). INTRODUCTION Colloidal semiconductor quantum dots (QDs) are considered as promising candidates for the next generation of surface light-emitting devices due to their high photoluminescence quantum yield (PL-QY), good stability and tunable emission wavelength over the entire visible spectrum range by controlling the size and composition.1–6 Their typically narrow emission profile (FWHM ca. 20-40 nm) is preferred for high color gamut in display applications, however, it is less favorable when approaching solid state lighting applications.7– 11

In contrast to converter based devices that benefit from the excellent performance of the

underlying GaN-based LED chip as optical pumping source12,13, QD light-emitting devices (QD-LEDs) are excited by direct electrical carrier injection into the QDs.4,14 In case of QDLEDs, it is possible to fabricate the whole device (electron and hole supporting layers as well as light-emitting QD layer) from material dispersions which enables printing or roll-to-roll technologies for future lighting applications.4,15 In the field of lighting applications, getting the best possible color rendering (quantified by color rendering index, CRI) is important, in addition to good color stability and adjustable correlated color temperature (CCT). Ideally, a white light source should replicate the natural sun spectrum or the one of a black body radiator, resulting in the best possible CRI of 100.

Typically, white light-emitting QD-LEDs are fabricated by a combination of multiple QD colors (e.g. red, green, blue; RGB) in one device whereby several device architectures have been introduced in literature yielding promising external quantum efficiencies (EQE) between 0.1 – 1.6 %.16–20 The stacking approach, where different colored QD layers are stacked on top of each other, implies careful control of the QD layer thickness and sequence to realize 2 ACS Paragon Plus Environment

Page 3 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

emission from all QD species for balanced and stable white color.19,21,22 Otherwise, unbalanced charge accumulation and/or unbalanced quenching of QD luminance due to high current may lead to a significant color shift during device operation.19

Favorable for fabrication and upscaling is the mixing approach, where a single active layer contains a mixture of RGB QDs that enables the adjustment of the emission color from “warm white” to “cold white” by the R:G:B ratio of corresponding QD loads.16,17,20,23 Typically, an unbalanced QD load with very high blue content (R