Stability and Catalytic Performance of Reconstructed Fe3O4(001) and

Subscriber access provided by UNIV OF NEW ENGLAND ARMIDALE

Article 3

4

Stability and Catalytic Performance of Reconstructed FeO(001) and FeO(110) Surfaces During Oxygen Evolution Reaction 3

4

Matthias Müllner, Michele Riva, Florian Kraushofer, Michael Schmid, Gareth S. Parkinson, Stijn F. L. Mertens, and Ulrike Diebold J. Phys. Chem. C, Just Accepted Manuscript • DOI: 10.1021/acs.jpcc.8b08733 • Publication Date (Web): 29 Oct 2018 Downloaded from http://pubs.acs.org on October 29, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Stability and Catalytic Performance of Reconstructed Fe3O4(001) and Fe3O4(110) Surfaces during Oxygen Evolution Reaction Authors: Matthias Müllner, Michele Riva, Florian Kraushofer, Michael Schmid, Gareth S. Parkinson*, Stijn F.L. Mertens* and Ulrike Diebold Institute of Applied Physics, TU Wien, Wiedner Hauptstrasse 8-10/134, 1040 Vienna, Austria Abstract Earth-abundant oxides are promising candidates as effective and low-cost catalysts for the oxygen evolution reaction (OER) in alkaline media, which remains one of the bottlenecks in electrolysis and artificial photosynthesis. A fundamental understanding of the atomic-scale reaction mechanism during OER could drive further progress, but a stable model system has yet to be provided. Here we show that Fe3O4 single crystal surfaces, prepared in ultra high vacuum (UHV) are stable in alkaline electrolyte in the range pH 7–14 and under OER conditions in 1 M NaOH. Fe3O4(001) and (110) surfaces where studied with X-ray photoelectron spectroscopy, low-energy electron diffraction and scanning tunneling microscopy in UHV, and atomic force microscopy in air. Fe3O4(110) is found to be more reactive for oxidative water splitting than (001)-oriented magnetite samples. Magnetite is electrically conductive, the structure and properties of its major facets are well understood in UHV. With these newly obtained results we propose magnetite (Fe3O4) as a promising model system for further mechanistic studies of electrochemical reactions in alkaline media and highly oxidizing conditions. Corresponding authors:

ACS Paragon Plus Environment

1

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 40

[email protected], [email protected]


2

Page 3 of 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1. Introduction Renewable electricity resources such as solar or wind power are a promising alternative to decreasing reserves of fossil fuels 1. The fluctuating nature of these energy sources poses great challenges however, because energy storage solutions are required to compensate for downtimes in production and give relief to increasingly strained electricity grids. Water electrolysis is a promising technology for the storage of surplus electricity in the form of hydrogen. An alternative to electricity-driven electrolysis would be direct, photo-driven water splitting or artificial photosynthesis, where solar energy is stored in the form of hydrogen or more complex, carbon-based energy-rich chemicals. In all these electrochemical processes the oxygen evolution reaction (OER), i.e., 2 H2O ⟶ 4 H+ + O2 + 4 e− in acidic media or 4 OH− ⟶ 2 H2O + O2 + 4 e− in alkaline media, is one of the bottlenecks due to slow kinetics at the anode surface. In acidic media, only noble metals such as Ru, Pt or Ir show promising OER activity and stability. In contrast, in alkaline solution many inexpensive, abundant metals and their alloys show comparable or even better catalytic performance than noble metals2. Nonetheless, alkaline water electrolysis has long been considered inefficient compared to acidic electrolysis, where the electrodes with Ir and Pt catalysts are separated by proton conducting polymer electrolyte membranes (PEM). Recent results however suggest that alkaline cells with Ni-based catalysts could be more efficient with respect to acidic systems if thinner hydroxide conducting PEMs than those typically used in current systems would be used 3, 4. The search for the best OER catalyst in alkaline media is ongoing, and transition metal oxides containing Ni, Co and Fe have been proposed as suitable candidates. Recently, Ni0.9Fe0.1Ox was demonstrated to be the most active ACS Paragon Plus Environment

3


Page 4 of 40

water oxidation catalyst in basic media, with OER activity roughly one order of magnitude higher than IrOx control films 5. A recent review6 focused on NiFe-based (oxy)hydroxide catalysts, and determined the optimum range of Fe concentration in Ni (oxy)hydroxides to be 10-50%. The reason for the excellent activity of these compounds is still debated however, and strategies to identify the catalytically active sites have yet to be provided. The synergistic role of Fe and Ni cations on the OER mechanism is unexplained, and it is not yet possible to assess to which extent factors such as the Fe and Ni oxidation states are important. To obtain a detailed understanding of the mechanisms governing chemical reactions on surfaces, a useful approach has been to reduce the level of complexity using model systems

7-9.

Studies on noble-metal single-crystal samples have laid the foundation for

the field of physical electrochemistry and electrochemical surface science at the atomic level. Atomically well-defined metallic surfaces can be reproducibly prepared either in UHV, by flame annealing in air, or by annealing in controlled atmospheres; early studies have investigated surface phenomena within the stability region of water. Experiments focused on adsorption of molecules

10-11,

electro-oxidation of metal electrodes

underpotential deposition of metals

13-14,

12

and

as well as the activity and stability of

bimetallic systems 15-16. However, in highly oxidizing conditions, such as during OER, all metals are oxidized. This can lead to electrochemical roughening or dissolution of well-defined single-crystal surfaces, and thus to a loss of atomic-level control 17-18. It is therefore reasonable to expand such investigations to well-defined metal-oxide model surfaces, which are expected to be intrinsically more stable than metals in an ACS Paragon Plus Environment

4

Page 5 of 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


oxidizing environment. The choice of a suitable model system is, however, crucial since it should: 1) mimic the system on which the reaction under investigation occurs as closely as possible; 2) be electrically conductive; 3) have a well-understood surface structure; and 4) be stable under reaction conditions. Upon introduction of a new model system, fulfillment of these criteria should be explicitly evaluated: in this respect, UHVbased surface science provides guidelines on how to address 1) – 3). One approach is to grow well-defined oxide thin films on metal substrates. This is particularly useful when the oxides under investigation are non-conductive or when bulk single crystals (of sufficient size) are not available. Fe3O4(111) 19 and FeO(111) thin films grown on Pt(111) have been shown to be stable systems for CO and H2 reduction, and show good stability in liquid water 20. Cobalt oxide is another promising material for OER in alkaline media. Interestingly, Co3O4 nanorods and nanocubes exposing (001) and (110) surfaces, respectively, differed in reactivity 21. Whether this is due to different surface reactivity or other parameters remains to be seen. Pioneering electrochemical studies of UHV-prepared Co3O4 thin films

22

have demonstrated a stability region in phosphate

buffer at pH 10 at potentials between 0.33 to 1.33 VRHE was reported 22, but focused on the (111) facet. The alternative to thin film growth is to study bulk single crystals. TiO2, a wide-bandgap semiconductor, is a popular model system in UHV surface science since it can be made conductive by annealing in UHV

23,

and recipes exist for the preparation of atomically

well-defined surfaces. TiO2 is stable in a wide potential and pH region, and the surfacescience approach has been recently used to investigate its photoelectrochemical properties. 24-26. ACS Paragon Plus Environment

5


Page 6 of 40

Another popular single-crystalline model system is the wide-bandgap semiconductor ZnO(0001) 27. The stability region in electrolyte has been identified as a pH range from 5.5 to 11, and slow dissolution below pH 5.5 has been shown directly by in situ by ECAFM 28. The search for a stable model system in realistic OER conditions, namely highly alkaline media (pH > 13) is ongoing. This work investigates magnetite (Fe3O4) as a promising model system for the OER in alkaline media. Fe3O4 belongs to the family of spinels, which are of great interest for OER 29. It is conductive at room temperature 30 and methods to prepare homogeneous surface terminations on various low-index facets of single crystals are well established in UHV

31.

The Fe3O4(110) surface reconstructs with a (1 × 3) periodicity due to regularly

spaced (111) nano-facets, which have a lower surface energy than a (110) termination 32-33.

The Fe3O4(001) surface exhibits a (√2x√2)R45° reconstruction originating from the

ordering of subsurface iron vacancies and interstitials 34. Interestingly, the reconstructed Fe3O4(001) surface provides well-defined sites for the adsorption or incorporation of various metal atoms including Ni or Co

35-36,

offering an ideal template for the

investigation of the OER on bimetallic model Ni/Fe oxides and hydroxides with atomicscale control. With this in mind, it is imperative to first test the stability and reactivity of the Fe3O4 oxide substrate itself under reaction conditions. Pourbaix diagrams for the iron-water system at room temperature indicate the tendency of Fe3O4 to be oxidized to Fe2O3 in solutions with pH > 12.5, and at potentials required for water oxidation 37. However, all cations in the four outermost layers of the reconstructed Fe3O4(001)-(√2x√2)R45° surface already have an Fe3+ like character

34,

which may aid its stability in alkaline media. ACS Paragon Plus Environment

6

Page 7 of 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


In the current paper, we examine whether UHV-prepared (001) and (110) surfaces are stable in electrolyte in the pH range 7–14, whether the stability is affected when the samples are subjected to cyclic voltammetry under OER conditions, and whether the atomic structure affects reactivity. We show that the surface morphology remains unchanged after electrolyte exposure, and that the nanostructure of the surfaces also appear unaffected under OER conditions in 1 M NaOH, pH 14, as judged by ambient AFM. Comparing the onset for OER, the (110) facet appears more reactive than (001). We conclude that Fe3O4 is a suitable substrate for future studies into fundamental aspects of the OER.


7


Page 8 of 40

2. Experimental Methods Two mineral Fe3O4(001) single crystals (top-hat-shaped samples from Surface Preparation Laboratory; base = 10 x 6 x 1 mm3, top = 6 x 6 x 2 mm3, miscut

Stability and Catalytic Performance of Reconstructed Fe3O4(001) and

Recommend Documents