Stoichiometry-controlled InP-based quantum dots - ACS Publications

Quantum-dot light-emitting diodes. (QLEDs) with the ..... efficiency, low turn-on voltage blue-violet quantum-dot-based light- emitting diodes. Nano L...
0 downloads 0 Views 358KB Size
Subscriber access provided by UNIV OF LOUISIANA

Communication

Stoichiometry-controlled InP-based quantum dots: synthesis, photoluminescence, and electroluminescence Yang Li, Xiaoqi Hou, Xingliang Dai, Zhenlei Yao, Liulin Lv, Yizheng Jin, and Xiaogang Peng J. Am. Chem. Soc., Just Accepted Manuscript • Publication Date (Web): 09 Apr 2019 Downloaded from http://pubs.acs.org on April 9, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Stoichiometry-controlled InP-based quantum dots: synthesis, photoluminescence, and electroluminescence Yang Li†, Xiaoqi Hou†, Xingliang Dai†,‡, Zhenlei Yao†,‡, Liulin Lv†, Yizheng Jin†,‡*, and Xiaogang Peng†* † Center for Chemistry of Novel & High-Performance Materials and Department of Chemistry, Zhejiang University, Hangzhou, 310027, P. R. China. ‡ State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou, 310027, P. R. China. Supporting Information ABSTRACT: We introduce stoichiometry control within both core and shell regions of InP/ZnSe/ZnS core/shell/shell quantum dots (QDs) to drastically advance their properties, approaching those of state-of-the-art CdSe-based QDs. The resulting QDs possess near-unity photoluminescence (PL) quantum yield (QY), mono-exponential decay dynamics, narrow linewidth, and nonblinking at a single-dot level. Quantum-dot light-emitting diodes (QLEDs) with the InP/ZnSe/ZnS core/shell/shell QDs as emitters exhibit a peak external quantum efficiency (EQE) of 12.2% and a maximum brightness of > 10,000 cd m-2, greatly exceeding those of the Cd/Pb-free QLEDs reported in literature. These results pave the way towards Cd/Pb-free QDs as outstanding optical and optoelectronic materials.

Colloidal quantum dots promise an unprecedented class of emissive materials due to their unique combination of sizedependent emission color, narrow linewidth, convenient photo- and electro-excitation, good photo-stability, and excellent solution processibility. 1 These intriguing properties have motivated extensive efforts on pursuing various applications of QD emitters. 2-9 State-of-the-art CdSe-based QDs possess nearly ideal luminescence properties 10,11, dominating all promising applications. Lead-halide perovskites QDs possess high PL QY and narrow PL linewidth. 12 However, both Cd and Pb are restricted for use in industry. 13 InP QDs are considered as the most promising candidates as Cd/Pb-free QDs with emission colors covering most part of visible and near-infrared window. 14 Studies 15-25 demonstrate wide-bandgap zinc chalcogenides (ZnSe and ZnS) can be epitaxially grown onto InP QDs to confine photo- and electrogenerated electron-hole pair (exciton) mostly within the InP cores. Though synthesis of InP QDs started ~25 years ago, 26,27 nearly every parameter of their luminescence properties is much less developed than that of CdSe-based QDs. 14 Here we propose a new synthetic concept for InP/ZnSe/ZnS core/shell/shell QDs to drastically boost their luminescence properties, i.e., stoichiometry control of both core (III-V) and shell (II-VI). In and P are known to be electronic dopants for II-VI semiconductors (such as ZnSe), and vice verse, 28,29 which inevitably generate intra-gap states severing as non-radiative recombination centers. 28-30 Results here reveal that it is possible to retain ideal stoichiometry between In and P within the core QDs and avoid indium incorporation during epitaxial growth of either ZnSe or ZnS shells, which results in QDs with excellent luminescence properties. The stoichiometry-controlled synthesis scheme consists of four stages (Figure 1a). InP and ZnSe possess zinc-blende structures with ~3% lattice mismatch, facilitating epitaxy of ZnSe shells onto InP cores. With a relatively small lattice mismatch of 5% between ZnSe and ZnS, additional ZnS shells are epitaxially grown onto the InP/ZnSe core/shell QDs to improve chemical stability of the QDs.

Figure 1. (a) Stoichiometry-controlled synthesis scheme. (b) TEM image of the resulting InP/ZnSe/ZnS core/shell/shell QDs with size-distribution histogram (top-right) and a high-resolution TEM image (bottom-left). (c) PL (red) and absorption (black) spectra of the InP/ZnSe/ZnS core/shell/shell QDs, (inset) stability of their PL QY under ambient conditions. (d) Transient PL spectra of ensemble (black) and single-dot (red) InP/ZnSe/ZnS core/shell/shell QDs. (e) Representative PL intensity trajectory of single QD with the background. (f) Histogram of the “on” time fraction for 50 QDs.

Figure 1b illustrates that our InP/ZnSe/ZnS core/shell/shell QDs (6 monolayers of ZnSe and 2 monolayers of ZnS shells) are nearly monodisperse in size (7.8 ± 0.5 nm). High-resolution transmission electron microscope (TEM) (inset, Figure 1b) and X-ray powder diffraction (Figure S1) reveal single-crystalline zinc-blende structure of the QDs. These red-emitting QDs show a PL peak at ~618 nm with a full width at half-maximum (FWHM) of 42 nm and near-unity PL QY (Figure 1c). PL QY of a sample stored in solution under ambient conditions for one month (inset, Figure 1c) is 93 ± 3 %. Figure 1d shows that, at both ensemble and single-dot levels, the transient PL spectra of the QDs can be well fitted by a monoexponential function (1000 counts, goodness-of-fit 90%), and mono-exponential decay dynamics (Figure S11), which are superior to those of other green-emitting InP-based QDs reported in literature. 17,19,21,25,34 With our InP/ZnSe/ZnS core/shell/shell QDs as emitters in QLEDs, a device structure (Figures 4a and S12) consisting of indium tin oxide (ITO) as anode, poly(ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS) and poly(N,N’-bis(4-butylphenyl)N,N’bis(phenyl)-benzidine) (poly-TPD) as hole-transport layer, QDs, Zn0.9Mg0.1O nanocrystals as electron-transport layer and silver as cathode is used. Figure 4b shows the current density-luminancevoltage characteristics of a device with optimal efficiency, which gives a turn-on voltage of 1.8 V. The electroluminescence peak is at 630 nm (Figure 4b, inset), corresponding to Commission Internationalede l’Eclairage (CIE) color coordinates of (0.69, 0.31). EQE of this device reaches 12.2%, corresponding to a high current efficiency of 14.7 cd A-1 (Figure 4c). The maximum brightness exceeds 10,000 cd m-2. A histogram of 35 devices shows an average peak EQE as 11.1% with a low relative standard deviation (Figure 4d), indicating excellent reproducibility. The overall performance of these red-emitting QLEDs, including EQE, turn-on voltage, current efficiency, maximum brightness, and reproducibility, greatly exceed that of the red-emitting QLEDs with InP-based QDs or other Cd/Pb-free QDs reported in literature 20,25,35-37 and are close to those of the red-emitting QLEDs with CdSe-based QDs. 2,6,7,38-46

Our work demonstrates stoichiometry control as a new concept for InP-based QDs with outstanding PL and electroluminescence properties, highlighting the feasibility of replacing CdSe-based emitters by Cd/Pb-free QDs. At present, zinc chalcogenides are the most probable material choices as epitaxial outer shells for nearly all types of application-relevant QDs, especially those targeting Cd/Pb-free products. Thus, the key design principle, i.e., controlling the stoichiometry of the elements within each portion—

We are grateful for the National Program on Key Research and Development Project (2016YFB0401600), and the National Natural Science Foundation of China (91833303).

REFERENCES (1) Brus, L. E. Electron electron and electron-hole interactions in small semiconductor crystallites: The size dependence of the lowest excited electronic state. J. Chem. Phys. 1984, 80, 4403-4409. (2) Colvin, V. L.; Schlamp, M. C.; Alivisatos, A. P. Light-emitting-diodes made from cadmium selenide nanocrystals and a semiconducting polymer. Nature 1994, 370, 354-357. (3) Michler, P.; Kiraz, A.; Becher, C.; Schoenfeld, W. V.; Petroff, P. M.; Zhang, L. D.; Hu, E.; Imamoglu, A. A quantum dot single-photon turnstile device. Science 2000, 290, 2282-2285. (4) Klimov, V. I.; Mikhailovsky, A. A.; McBranch, D. W.; Leatherdale, C. A.; Bawendi, M. G. Quantization of multiparticle Auger rates in semiconductor quantum dots. Science 2000, 287, 1011-1013. (5) Michalet, X.; Pinaud, F. F.; Bentolila, L. A.; Tsay, J. M.; Doose, S.; Li, J. J.; Sundaresan, G.; Wu, A. M.; Gambhir, S. S.; Weiss, S. Quantum dots for live cells, in vivo imaging, and diagnostics. Science 2005, 307, 538-544. (6) Shirasaki, Y.; Supran, G. J.; Bawendi, M. G.; Bulovic, V. Emergence of colloidal quantum-dot light-emitting technologies. Nat. Photon. 2013, 7, 13-23. (7) Dai, X.; Zhang, Z.; Jin, Y.; Niu, Y.; Cao, H.; Liang, X.; Chen, L.; Wang, J.; Peng, X. Solution-processed, high-performance light-emitting diodes based on quantum dots. Nature 2014, 515, 96-99. (8) Lin, X.; Dai, X. L.; Pu, C. D.; Deng, Y. Z.; Niu, Y.; Tong, L. M.; Fang, W.; Jin, Y. Z.; Peng, X. G. Electrically-driven single-photon sources based on colloidal quantum dots with near-optimal antibunching at room temperature. Nat. Commun. 2017, 8, 1132. (9) Fan, F. J.; Voznyy, O.; Sabatini, R. P.; Bicanic, K. T.; Adachi, M. M.; McBride, J. R.; Reid, K. R.; Park, Y. S.; Li, X. Y.; Jain, A.; QuinteroBermudez, R.; Saravanapavanantham, M.; Liu, M.; Korkusinski, M.; Hawrylak, P.; Klimov, V. I.; Rosenthal, S. J.; Hoogland, S.; Sargent, E. H. Continuous-wave lasing in colloidal quantum dot solids enabled by facetselective epitaxy. Nature 2017, 544, 75-79. (10) Chen, O.; Zhao, J.; Chauhan, V. P.; Cui, J.; Wong, C.; Harris, D. K.; Wei, H.; Han, H. S.; Fukumura, D.; Jain, R. K.; Bawendi, M. G. Compact high-quality CdSe-CdS core-shell nanocrystals with narrow emission linewidths and suppressed blinking. Nat. Mater. 2013, 12, 445-451. (11) Zhou, J.; Zhu, M.; Meng, R.; Qin, H.; Peng, X. Ideal CdSe/CdS core/shell nanocrystals enabled by entropic ligands and their core size-, shell thickness-, and ligand-dependent photoluminescence properties. J. Am. Chem. Soc. 2017, 139, 16556-16567. (12) Protesescu, L.; Yakunin, S.; Bodnarchuk, M. I.; Krieg, F.; Caputo, R.; Hendon, C. H.; Yang, R. X.; Walsh, A.; Kovalenko, M. V. Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): Novel

ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

optoelectronic materials showing bright emission with wide color gamut. Nano Lett. 2015, 15, 3692-3696. (13) http://ec.europa.eu/environment/waste/rohs_eee/legis_en.htm. (14) Reiss, P.; Carriere, M.; Lincheneau, C.; Vaure, L.; Tamang, S. Synthesis of semiconductor nanocrystals, focusing on nontoxic and earthabundant materials. Chem. Rev. 2016, 116, 10731-10819. (15) Haubold, S.; Haase, M.; Kornowski, A.; Weller, H. Strongly luminescent InP/ZnS core-shell nanoparticles. Chemphyschem 2001, 2, 331-334. (16) Xie, R.; Battaglia, D.; Peng, X. Colloidal InP nanocrystals as efficient emitters covering blue to near-infrared. J. Am. Chem. Soc. 2007, 129, 15432-15433. (17) Li, L.; Reiss, P. One-pot synthesis of highly luminescent InP/ZnS nanocrystals without precursor injection. J. Am. Chem. Soc. 2008, 130, 11588-11589. (18) Xu, S.; Ziegler, J.; Nann, T. Rapid synthesis of highly luminescent InP and InP/ZnS nanocrystals. J. Mater. Chem. 2008, 18, 2653-2656. (19) Lim, J.; Bae, W. K.; Lee, D.; Nam, M. K.; Jung, J.; Lee, C.; Char, K.; Lee, S. InP@ZnSeS, core@composition gradient shell quantum dots with enhanced stability. Chem. Mater. 2011, 23, 4459-4463. (20) Yang, X.; Zhao, D.; Leck, K. S.; Tan, S. T.; Tang, Y. X.; Zhao, J.; Demir, H. V.; Sun, X. W. Full visible range covering InP/ZnS nanocrystals with high photometric performance and their application to white quantum dot light-emitting diodes. Adv. Mater. 2012, 24, 4180-4185. (21) Tessier, M. D.; Dupont, D.; De Nolf, K.; De Roo, J.; Hens, Z. Economic and size-tunable synthesis of InP/ZnE (E = S, Se) colloidal quantum dots. Chem. Mater. 2015, 27, 4893-4898. (22) Li, Y.; Pu, C. D.; Peng, X. G. Surface activation of colloidal indium phosphide nanocrystals. Nano Res. 2017, 10, 941-958. (23) Chandrasekaran, V.; Tessier, M. D.; Dupont, D.; Geiregat, P.; Hens, Z.; Brainis, E. Nearly blinking-free, high-purity single-photon emission by colloidal InP/ZnSe quantum dots. Nano Lett. 2017, 17, 6104-6109. (24) Reid, K. R.; McBride, J. R.; Freymeyer, N. J.; Thal, L. B.; Rosenthal, S. J. Chemical structure, ensemble and single-particle spectroscopy of thick-shell InP-ZnSe quantum dots. Nano Lett. 2018, 18, 709-716. (25) Ramasamy, P.; Ko, K.-J.; Kang, J.-W.; Lee, J.-S. Two-step “seedmediated” synthetic approach to colloidal indium phosphide quantum dots with high-purity photo- and electroluminescence. Chem. Mater. 2018, 30, 3643-3647. (26) Micic, O. I.; Curtis, C. J.; Jones, K. M.; Sprague, J. R.; Nozik, A. J. Synthesis and characterization of InP quantum dots. J. Phys. Chem. 1994, 98, 4966-4969. (27) Guzelian, A. A.; Katari, J. E. B.; Kadavanich, A. V.; Banin, U.; Hamad, K.; Juban, E.; Alivisatos, A. P.; Wolters, R. H.; Arnold, C. C.; Heath, J. R. Synthesis of sze-selected, surface-passivated InP nanocrystals. J. Phys. Chem. 1996, 100, 7212-7219. (28) Qidwai, A. A.; Woods, J. Defect levels in indium and gallium doped zinc selenide. J. Cryst. Growth. 1982, 59, 217-222. (29) Moon, Y.; Si, S.; Yoon, E.; Kim, S. J. Low temperature photoluminescence characteristics of Zn-doped InP grown by metalorganic chemical vapor deposition. J. Appl. Phys. 1998, 83, 2261-2265. (30) Mocatta, D.; Cohen, G.; Schattner, J.; Millo, O.; Rabani, E.; Banin, U. Heavily doped semiconductor nanocrystal quantum dots. Science 2011, 332, 77-81. (31) Yang, Y.; Li, J. Z.; Lin, L.; Peng, X. G. An efficient and surfacebenign purification scheme for colloidal nanocrystals based on quantitative assessment. Nano Res. 2015, 8, 3353-3364.

(32) Talapin, D. V.; Gaponik, N.; Borchert, H.; Rogach, A. L.; Haase, M.; Weller, H. Etching of colloidal InP nanocrystals with fluorides: Photochemical nature of the process resulting in high photoluminescence efficiency. J. Phys. Chem. B 2002, 106, 12659-12663. (33) Yang, Y.; Qin, H.; Peng, X. Intramolecular entropy and sizedependent solution properties of nanocrystal-ligands complexes. Nano Lett. 2016, 16, 2127-2132. (34) Lim, J.; Park, M.; Bae, W. K.; Lee, D.; Lee, S.; Lee, C.; Char, K. Highly efficient cadmium-free quantum qot light-emitting diodes enabled by the direct formation of excitons within InP@ZnSeS quantum dots. Acs Nano 2013, 7, 9019-9026. (35) Tan, Z. N.; Zhang, Y.; Xie, C.; Su, H. P.; Liu, J.; Zhang, C. F.; Dellas, N.; Mohney, S. E.; Wang, Y. Q.; Wang, J. K.; Xu, J. Near-Band-Edge electroluminescence from heavy-metal-free colloidal quantum dots. Adv. Mater. 2011, 23, 3553-3558. (36) Jo, J. H.; Kim, J. H.; Lee, K. H.; Han, C. Y.; Jang, E. P.; Do, Y. R.; Yang, H. High-efficiency red electroluminescent device based on multishelled InP quantum dots. Opt. Lett. 2016, 41, 3984-3987. (37) Kim, H. Y.; Park, Y. J.; Kim, J.; Han, C. J.; Lee, J.; Kim, Y.; Greco, T.; Ippen, C.; Wedel, A.; Ju, B.-K.; Oh, M. S. Transparent InP quantum dot light-emitting diodes with ZrO2 electron transport layer and indium zinc oxide top electrode. Adv. Func. Mater. 2016, 26, 3454-3461. (38) Qian, L.; Zheng, Y.; Xue, J. G.; Holloway, P. H. Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures. Nat. Photon. 2011, 5, 543-548. (39) Mashford, B. S.; Stevenson, M.; Popovic, Z.; Hamilton, C.; Zhou, Z. Q.; Breen, C.; Steckel, J.; Bulovic, V.; Bawendi, M.; Coe-Sullivan, S.; Kazlas, P. T. High-efficiency quantum-dot light-emitting devices with enhanced charge injection. Nat. Photon. 2013, 7, 407-412. (40) Lim, J.; Jeong, B. G.; Park, M.; Kim, J. K.; Pietryga, J. M.; Park, Y. S.; Klimov, V. I.; Lee, C.; Lee, D. C.; Bae, W. K. Influence of shell thickness on the performance of light-emitting devices based on CdSe/Zn1XCdXS core/shell heterostructured quantum dots. Adv. Mater. 2014, 26, 8034-8040. (41) Yang, Y. X.; Zheng, Y.; Cao, W. R.; Titov, A.; Hyvonen, J.; Manders, J. R.; Xue, J. G.; Holloway, P. H.; Qian, L. High-efficiency light-emitting devices based on quantum dots with tailored nanostructures. Nat. Photon. 2015, 9, 259-266. (42) Lee, K. H.; Han, C. Y.; Kang, H. D.; Ko, H.; Lee, C.; Lee, J.; Myoung, N.; Yim, S. Y.; Yang, H. Highly efficient, color-reproducible full-color electroluminescent devices based on red/green/blue quantum dot-mixed multilayer. Acs Nano 2015, 9, 10941-10949. (43) Shen, H.; Cao, W.; Shewmon, N. T.; Yang, C.; Li, L. S.; Xue, J. Highefficiency, low turn-on voltage blue-violet quantum-dot-based lightemitting diodes. Nano Lett. 2015, 15, 1211-1216. (44) Zhang, H.; Chen, S. M.; Sun, X. W. Efficient red/green/blue tandem quantum-dot light-emitting diodes with external quantum efficiency exceeding 21%. Acs Nano 2018, 12, 697-704. (45) Cao, W.; Xiang, C.; Yang, Y.; Chen, Q.; Chen, L.; Yan, X.; Qian, L. Highly stable QLEDs with improved hole injection via quantum dot structure tailoring. Nat. Commun. 2018, 9, 2608. (46) Lim, J.; Park, Y. S.; Wu, K.; Yun, H. J.; Klimov, V. I. Droop-free colloidal quantum dot light-emitting diodes. Nano Lett. 2018, 18, 66456653.

Table of Contents

ACS Paragon Plus Environment

Page 4 of 4