Structurally Similar Triphenylphosphine-Stabilized Undecagolds

ACS eBooks; C&EN Global Enterprise .... Publication Date (Web): August 29, 2014 ... Ligand exchange on [Au11(PPh3)8Cl2]Cl yields only small clusters, ...
0 downloads 0 Views 3MB Size
Article pubs.acs.org/JACS

Open Access on 08/29/2015

Structurally Similar Triphenylphosphine-Stabilized Undecagolds, Au11(PPh3)7Cl3 and [Au11(PPh3)8Cl2]Cl, Exhibit Distinct Ligand Exchange Pathways with Glutathione Lallie C. McKenzie,†,‡ Tatiana O. Zaikova,† and James E. Hutchison* Department of Chemistry and Biochemistry and Materials Science Institute, 1253 University of Oregon, Eugene, Oregon 97403-1253, United States S Supporting Information *

ABSTRACT: Ligand exchange is frequently used to introduce new functional groups on the surface of inorganic nanoparticles or clusters while preserving the core size. For one of the smallest clusters, triphenylphosphine (TPP)-stabilized undecagold, there are conflicting reports in the literature regarding whether core size is retained or significant growth occurs during exchange with thiol ligands. During an investigation of these differences in reactivity, two distinct forms of undecagold were isolated. The X-ray structures of the two forms, Au11(PPh3)7Cl3 and [Au11(PPh3)8Cl2]Cl, differ only in the number of TPP ligands bound to the core. Syntheses were developed to produce each of the two forms, and their spectroscopic features correlated with the structures. Ligand exchange on [Au11(PPh3)8Cl2]Cl yields only small clusters, whereas exchange on Au11(PPh3)7Cl3 (or mixtures of the two forms) yields the larger Au25 cluster. The distinctive features in the optical spectra of the two forms made it possible to evaluate which of the cluster forms were used in the previously published papers and clarify the origin of the differences in reactivity that had been reported. The results confirm that reactions of clusters and nanoparticles may be influenced by small variations in the arrangement of ligands and suggest that the role of the ligand shell in stabilizing intermediates during ligand exchange may be essential to preventing particle growth or coalescence.



INTRODUCTION Ligand exchange is a leading approach to functionalize inorganic nanoparticles and clusters. Exchange, or replacement, of the ligands used during synthesis with specific molecules or polymers introduces desired functionality onto the periphery of a nanoparticle for specific applications or scientific investigations.1,2 Gold nanoparticles and clusters are among the most widely studied inorganic cores,3 yet the roles of the surface ligands are less understood. Most reports focus on either (i) the roles that ligands play during synthesis to control the size, shape, stability and solubility of nanoparticles or (ii) how ligands are used to introduce new functionality through ligand exchange.4−6 Few studies have been conducted to elucidate the mechanisms of exchange reactions7,8 or to probe the influence of the ligands on the nanoparticle reactivity. Ligand exchange of thiols for triphenylphosphine is widely used to produce functionalized gold nanoparticles.2,9,10 Following on our discovery that larger (dcore ∼ 1.5 nm) triphenylphosphine (TPP)-stabilized gold nanoparticles are excellent synthons to produce dozens of differently functionalized thiol-stabilized gold nanoparticles,9,11 we recognized that TPP-stabilized undecagold clusters might also serve as a building block to produce thiol-stabilized undecagold clusters © 2014 American Chemical Society

by ligand exchange. In the decades since their discovery in 1966,12−14 triarylphosphine-stabilized undecagold clusters have been of interest due to the optical and electronic properties that stem from the 11-atom Au core14 and their utility as heavy atom contrast agents for electron microscopy.15−17 A range of substituted triarylphosphines have been employed to introduce specific functionality to the cluster and/or to render the cluster water-soluble;15,17 however, exchanges with thiols had not been explored. We showed that phosphine-to-thiol ligand exchange reactions on undecagold provide access to functionalized subnanometer clusters.10,18 Although TPP-stabilized undecagold is more inert than its larger analogs, ligand exchange proceeds smoothly at 55 °C19 with ∼20 equiv of ligand per particle. Exchange can be carried out in organic solution or under biphasic conditions10 to produce functionalized clusters with the same small core size as the starting cluster. Given the broad range of available functionalities10 and the relative ease of synthesis, this approach has been used widely to produce functionalized clusters.14,20−23 Received: July 24, 2014 Published: August 29, 2014 13426

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

A key finding from our studies was that the small particle core size was retained during exchange.10,18 Thus, we were surprised to learn that others obtained different results when reportedly using the same approach. Shichibu et al. reported products of higher nuclearity (Au25) were produced using a large excess (430 equiv) of glutathione in a biphasic ligand exchange.20 Subsequently these authors reported that Au25 is also formed in partial ligand exchanges with 60 equiv of various alkylthiols in a single-phase (CHCl3) exchange.21 The authors state that Au11(PPh3)8Cl2+ is the major component within the starting undecagold cluster based upon optical spectra and ESIMS. They attribute the formation of Au25 to the flocculation of higher nuclearity particles that are subsequently reduced in size (etched) in the presence of excess thiol. Yang and Chen reported that the use of the same undecagold synthesis22 produced Au11(PPh3)7Cl3 instead of [Au11(PPh3)8Cl2]Cl. They reported that the core size was preserved during exchange, although the optical spectra show the signature absorption of Au25 at 670 nm.24 It has been suggested that these discrepancies in the literature are related to differences in characterization,21,25 reaction conditions (e.g., nitrogen vs air atmosphere),20 or exchanging ligand identity;26 however, the root cause remains unclear. In an attempt to understand possible reasons for these differing reports, we examined the optical spectra of the precursor clusters reportedly used in different ligand exchanges. The absorption spectra of undecagold species have greater fine structure than in larger gold species, and the fine structure is sensitive to the core structure and ligand composition. A comparison of the optical spectra of the undecagold precursors reported in the literature is provided in Figure 1. Differences in the spectra suggest that different undecagold precursors were used, which might explain the disparate results obtained in the different laboratories. A review of the literature revealed a number of reports of undecagold clusters possessing a variety of TPP-based ligands and different anions. There are a number of crystal structures

but almost no corroborating spectral data. To further compound the situation, “undecagold”, “Au11(PPh3)7Cl3” and “Au11(PPh3)8Cl3” have been used interchangeably (sometimes in the same publication) to refer to Au11(PPh3)nCl3 clusters for which crystal structures or definitive spectral data were not available.10,15,16,18,21,22,27−29 Herein, we report the first complete characterization of Au11(PPh3)7Cl3 (Au11−7) and [Au11(PPh3)8Cl2]Cl (Au11−8) and the surprising discovery that the small differences in ligation result in dramatically different ligand exchange reactivity. Single crystal X-ray structures show that the two clusters have almost identical Au cores and vary only in the number of bound triphenylphosphine and chloride ligands. The two species have significantly different stabilities and reactivities. Analysis of the optical spectra shown in Figure 1 and the findings reported herein explain the disparate results that have been reported in the literature: under the conditions that we originally reported,10,18 ligand exchange of Au11−8 yields clusters with the small core size, whereas the same exchanges of solutions containing Au11−7 lead to aggregation and the production of Au25.



RESULTS AND DISCUSSION There Are Two Forms of “TriphenylphosphineStabilized Undecagold”. We previously demonstrated that [Au11(PPh3)8Cl2]Cl (Au11−8) could be synthesized and employed in ligand-exchange reactions to produce more than 20 thiol-stabilized gold clusters based upon the undecagold core.10 Characterization by TEM, XPS and TGA confirmed the core size and ligand shell composition. Upon careful recrystallization from CH2Cl2/hexanes,18 pure Au11−8 can be prepared in ∼20% yield as red plates that show a single set of three resonances in the aromatic region of the 1H NMR. During our attempts to produce larger quantities of Au11−8, we found that in some samples, the NMR spectra showed a second set of peaks in the aromatic region, the UV−visible absorbance spectra were less defined, and two types of crystals (red plates and orange needles) were produced. The two crystal forms were mechanically separated (Figure 2), redissolved, and characterized. Distinct NMR and UV−visible absorbance spectra confirmed that two unique molecular species had been isolated. The red plates had the same spectral features as Au11−8, (the precursor we used in our previous ligandexchange experiments),10,18 while the other compound was a different cluster species. X-ray quality crystals were grown for both forms in order to correlate the structures with their spectral features. Two unique structures containing TPP and chloride ligands were determined by crystallographic analysis. The orange needles were identified as Au11(PPh3)7Cl3 (Au11−7), and the red plates were Au11−8 (Figure 2). The Au11−7 structure shows that seven phosphines and three chlorides ligate all ten gold atoms on the surface of the cluster. In the Au11−8 structure, an additional phosphine is bound to the surface, displacing one of the chlorides to an outer sphere position. The gold cores of the two clusters are nearly identical to each other and similar to previously identified undecagold clusters with different substitutions on the phosphine groups and a variety of anions.12,27,30−35 In addition, the bound phosphine and chloride ligands are located in the same positions as in previously determined Au11(PPh3)7Cl336 and Au11(PPh3)8Cl337 structures. Solution spectral data, including proton NMR, 31P NMR, and UV−visible spectroscopy, were collected for each of

Figure 1. Optical spectra reported for TPP-stabilized undecagold clusters illustrating clear differences in peak positions (at approximately 300 and 420 nm), relative intensities of the peaks, and extent of fine structure for each example. All data were digitized from the cited sources, placed on the same scale, and offset in the vertical direction for clarity. Adapted with permission from Hutchison, J. E. et al. J. Phys. Chem. B 2002, 106, 9979 (ref 18); Chen, S. et al. Nano Lett. 2003, 3, 75 (ref 22); Shichibu, Y. et al. J. Amer. Chem. Soc. 2005, 127, 13464 (ref 20); Shichibu, Y. et al. J. Phys. Chem. C 2007, 111, 7845 (ref 21). Copyright 2002, 2003, 2005, and 2007 American Chemical Society. 13427

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

Figure 3. 1H NMR and UV−visible spectra for the two pure triphenylphosphine-stabilized undecagold clusters recorded in CD2Cl2 and CH2Cl2, respectively. In the 1H NMR spectra (A), resonances for phenyl protons in the ligand shell of each form have diagnostic chemical shifts. The UV−visible spectra (B) show differences in the peak positions and intensities (see text for details). Compared to the spectra in Figure 1, each pure form shows well-defined spectral features.

Figure 2. Optical micrographs and X-ray crystal structures of the central cores of the two crystalline forms of triphenylphosphinestabilized undecagold. The needles (top) are composed of undecagold with seven phosphines in the ligand shell: Au11(PPh3)7Cl3. The plates (bottom) have been identified as undecagold with eight phosphines in the ligand shell and one outer sphere chloride: [Au11(PPh3)8Cl2 ]Cl. The two crystal structures have been oriented to illustrate that both have similar frameworks with the exception of the difference in chlorine ligation. The frameworks are shown with thermal ellipsoids given at the 30% probability level.

for Au11−818 and suggest that the two clusters have similar but not identical electronic structures.38 The aromatic ring protons in the bound PPh3 ligands of each Au11 cluster exhibit three distinct multiplet peaks with chemical shifts between 7.4 and 6.6 ppm that result from differential shielding of the protons in the ortho, meta, and para positions of the ligand upon binding to the metal.39 The integration of the peaks matches the expected 2:2:1 ratio in both compounds. The larger downfield chemical shift for the ortho protons and larger chemical shift difference between peaks in the Au11−7 spectra suggest that the electronic environment of the ligands in Au11−7 is impacted by the Au core to a greater extent than in Au11−8. Au11−7 also displays a larger downfield shift in the 31 P NMR data (see Supporting Information). Spectral features can be definitively assigned to both structural forms. Spectra of pure Au11−7 and Au11−8 (obtained by dissolving the crystals of each form used for Xray analysis) show distinct peaks and shoulders characteristic of undecagold clusters.40 The presence of defined peaks, as opposed to the broader spectra often reported in the literature (for example in Figure 1), suggest that the crystalline samples have a higher degree of purity than samples exhibiting lessdefined spectra. The data confirm our previous spectral assignments for Au11−8, including strong absorbances at 240, 312, and 416 nm.18 The peaks in the spectrum for Au11− 7 (at 420 and 308 nm) are shifted from those of Au11−8. Both of the peaks of Au11−7 are accompanied by smaller peaks at shorter wavelengths. The absorbance bands for undecagold have been attributed to transitions in the [Au11]3+ core, and the differences in absorption wavelength for the two forms likely result from changes in the core geometry required to

the structures, providing the first comprehensive comparison of two clusters, Au11−7 and Au11−8, that contain the same phosphine and halide ligands but exhibit different ligand arrangements. Although TEM is commonly used to determine the core size of metal nanoparticles, accurate measurement of subnanometer structures can be challenging due to limits in resolution and contrast. In addition, only the cores of metal nanoparticles can be imaged because TEM relies on the difference in contrast between high-Z and low-Z elements. Identical size distributions of 0.8 ± 0.3 nm were confirmed for both crystallized materials. TEM imaging cannot discriminate between the two forms; thus, other analytical techniques were employed as the primary characterization tools. Each Form Has Distinct Spectral Signatures. Although NMR spectroscopy can rarely be used to identify specific structural forms of gold nanoparticles or clusters, it provides valuable structural information for the monodisperse cluster species in this study. NMR spectroscopy directly probes the ligand environments of nanoparticles and therefore provided opportunities to distinguish between the two Au11 clusters, as opposed to TEM. Each species can be readily identified in solution because the observed 1H and 31P NMR spectra (Figure 3A and Supporting Information) are uncomplicated and distinct. The data confirmed the previous spectral assignments 13428

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

We hypothesized that increasing the amount of reductant even more might lead to a larger percentage of Au11−7 given that the traditional synthesis of the clusters led to the formation of both forms of undecagold and decreasing the amount of reductant produced mostly Au11−8. THF was used to increase the solubility of both AuPPh3Cl and the reducing agent. Using THF as the main solvent and a 5-fold excess of NaBH4 led to the formation of only the Au11−7 cluster. Typical yields range from 65 to 70% after purification. Differences in Ligation Result in Markedly Different Ligand Exchange Reactivity. Once pure samples of the two forms of undecagold were reproducibly prepared and their structures and spectral features determined, we investigated the differences in reactivity between the two forms. In order to determine whether the differences in reactivity were due to the ligation of the cluster, all other reaction conditions were kept constant. We used conditions originally reported for exchanges involving Au11−8: a biphasic reaction involving water and chloroform phases, 55 °C bath temperature, and 10 equiv of ligand. Glutathione was used in both cases to eliminate differences due to the structure of the exchanging ligands. Reactions were run under an N2 atmosphere to minimize oxidation of the ligand. The difference in reactivity between the two forms is evident from the colors of the aqueous phases (Figure 4) at the end of

accommodate the additional bound phosphine in Au11− 8.16,41,42 Mixtures of the two clusters display broad absorbances in the UV−visible spectra, rather than the distinct peaks found in the pure clusters. In Figure 1, the spectrum of the material used in Hutchison et al. shows peaks at 312 and 416 nm. These wavelengths suggest that the starting material for ligand exchange in our initial studies18 was primarily Au11−8. On the other hand, the spectra from Yang and Chen22 and the synthesized material from Shichibu et al.20 exhibit broad peaks. These spectra suggest that the starting materials in both ligand exchange reactions contained a mixture of clusters including both forms of TPP-stabilized undecagold. The spectra from Shichibu et al.21 and undecagold show distinct features, suggesting higher purity; however, the location of the peaks suggests that the materials used in these studies were primarily Au11−7. Each of the Two Forms Can Be Readily Synthesized. Once distinct spectral features could be assigned to the two clusters, we aimed to develop methods to directly synthesize each form. Phosphine-stabilized gold clusters are typically synthesized by reduction of mononuclear gold phosphine complexes with NaBH4.43 In our previous work,10,18 AuPPh3Cl was used as the starting material and was reduced with one molar equivalent of NaBH4 in ethanol (Scheme 1). Under these Scheme 1. New Syntheses of Pure [Au11(PPh3)8Cl2]Cl and Au11(PPh3)7Cl3 Compared to the Preparation Typically Used to Prepare Au11

conditions, we observed formation of a mixture of two different undecagold species, but Au11−8 was the primary product after crystallization. It was expected that by varying the reaction conditions, including the reagent ratios, solvents, and temperature, controlled routes to each form could be developed. It has been reported that [Au11(PPh3)8Cl2]+ can be synthesized through the conversion of Au9(PPh3)8(NO3)344,45 and that Au9(PPh3)8(NO3)3 can be synthesized in ethanol with a 1:0.25 molar ratio of AuPPh3NO3 to NaBH4.46 Based upon these findings, we explored whether decreasing the ratio of NaBH4 to Au(PPh3)Cl might drive the reaction toward Au11− 8. CH2Cl2 was used as a solvent to ensure that the gold precursor and the product remained soluble. A substoichiometric amount of NaBH4 (only 0.25 mol equiv) was introduced as an ethanol solution into the CH2Cl2 solution of the precursor to initiate the reaction. Au11−8 was obtained as the primary product prior to purification. A significant amount of unreacted starting material was recovered from the reaction mixture due to the low concentration of reducing agent. Silica gel chromatography removed all other products and the unreacted AuPPh3Cl to provide 38% yield of Au11−8. Efforts to increase the conversion of AuPPh3Cl to Au11−8 by increasing the equivalents of reductant led to production of Au11−7.

Figure 4. Photos and UV−visible spectra of the products of the biphasic (CHCl3/H2O) ligand exchange reactions between the two forms of undecagold and glutathione. The photos show visible differences in color (brown vs orange) in the water layer after ligand exchange with Au11(PPh3)7Cl3 (A) and [Au11(PPh3)8Cl2]Cl (B). The UV−visible spectra show increased absorbance in the 600−700 nm region for the samples that contained Au11(PPh3)7Cl3.

the exchange reaction. When Au11−7 is used as the starting material a brown solution results, and when Au11−8 is used as the starting cluster a brown-orange color results. There is a noticeable absorbance peak in the UV−visible spectra around 670 nm for Au:SG clusters synthesized from Au11−7 and from the mixture of Au11−7 and Au11−8. This absorbance peak is characteristic of the Au25(SG)18 cluster.24,47 It is significant that there is no such characteristic peak present when Au11−8 is 13429

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

nanoparticle etching in the presence of excess ligand.49 The same reactivity trends were observed for the ligand exchange reaction between trimethylammoniumethanethiol (TMAT) and Au11−7 and Au11−8 (see Supporting Information). The More Stable Cluster (Au11−8) Does Not Form Au25 during Ligand Exchange. Two questions follow from these findings. First, why does the relatively small difference in ligand shell composition lead to remarkably different reactivities for the two clusters? Second, why does the presence of even small amounts of Au11−7 lead to particle growth and the formation of Au 25 ? We considered several alternative hypotheses regarding the cluster reactivity. Given that both of the cluster species correspond to closed electronic shell (eightelectron) cores within the superatom counting approach,28 the differences are not likely due to electronic structural differences. It is possible that the difference in reactivity is directly related to cluster stability which, in turn, may be influenced by differences in the steric stabilization or increased core charge induced by the additional TPP in Au11−8. If Au11−7 is less stable and readily coalesces to form larger nanoparticles, these may be etched back down to Au25 by the excess thiol ligand. This hypothesis is related to the mechanism suggested by Shichibu et al.20 that involves sequential growth and dissolution of the cores. An alternative hypothesis is that the less dense ligand shell in Au11−7 permits oligomerization of the clusters during the early stages of ligand exchange and that subsequent rearrangement, addition, or removal of gold atoms adopts the thermodynamically stable Au25 structure.50 The extra phosphine in Au11−8 might inhibit coalescence of the clusters containing a mixed ligand shell early in the exchange process and permit the thiols to fully replace the phosphines and chlorides to retain the core size. During our work with Au11−7 and Au11−8, we noticed unexpected, but remarkable, differences in the stability of these clusters. The Au11−7 cluster decomposes rapidly in CH2Cl2 even at room temperature. In contrast, Au11−8 clusters are stable under the same conditions for months. We hypothesized that the stability of the clusters would differ even more at the elevated temperatures often used for ligand exchange reactions. Thus, we investigated the stabilities and decomposition products of both undecagold clusters under the temperature and solvent conditions used during typical ligand-exchange reactions. Figure 6 shows the 1H NMR spectra of Au11−8 and Au11− 7 clusters before and after heating in CHCl3. The solutions were held at 50 °C for the specified time and then cooled to room temperature. After the solvent was removed, the products were dissolved in CD2Cl2 for NMR analysis. The signature peaks that persist in the Au11−8 spectrum (Figure 6A) demonstrate that these clusters are relatively stable, even after 210 min of heating in CHCl3. The new peaks in this spectrum indicate that Au(PPh3)Cl is formed and suggest that only a small number of the clusters have decomposed. After heating, the spectrum of the Au11−7 products (Figure 6B) shows only peaks from Au(PPh3)Cl, and there are no remaining peaks from Au11−7. Thin layer chromatography confirms formation of AuPPh3Cl salt along with some other gold-containing species. These data suggest that the clusters have completely decomposed after 150 min of heating. We can conclude that stability of these clusters is vastly different under traditional ligand exchange conditions and that Au11−7 is much less stable than Au11−8.

used as the starting material. The absorbance spectra suggest that Au25(SG)18 clusters are formed when Au11−7 is present in the starting material but not formed when purified Au11−8 is used. The formation and stability of the glutathione-exchanged product were monitored by UV−visible spectroscopy (see Supporting Information). Upon incubation in the reaction mixture over the course of 24 h, some of the clusters formed during exchange with Au11−8 became unstable, yielding a white precipitate that is likely a Au(I)-alkanethiol polymer.48 In contrast, Au25(GS)18 clusters synthesized from Au11−7 were stable in the reaction mixture for more than 24 h. The ligand exchange products were analyzed by electrospray ionization mass spectrometry (ESI-MS) and polyacrylamide gel electrophoresis (PAGE). The mass spectra of all three glutathione-protected clusters synthesized are shown in Figure 5A. The peak with m/z =1740.5 that corresponds to the

Figure 5. Analysis of reaction products of ligand exchange between glutathione and Au11(PPh3)7Cl3 (1), [Au11(PPh3)8Cl2]Cl (2), and a mixture of the two (3). High-resolution ESI spectra (A) exhibit a peak at m/z = 1740.5 corresponding to a molecular ion (Au25(GS)18 as the 6-plus ion) resulting from Au25 in the products from both reactions containing Au11(PPh3)7Cl3. Gel electrophoresis results (B) also suggest the presence of Au25 in the samples resulting from Au11(PPh3)7Cl3 and the mixture.

molecular ion Au25(GS)18 (for the 6-plus species)24 is present in the mass spectra obtained for products synthesized from Au11−7 or from the mixture. This molecular ion is not observed when purified Au11−8 is used as a starting material. Gel electrophoresis analysis (Figure 5B) was carried out on the purified Au:SG clusters synthesized from Au11−7 (1), Au11− 8 (2), and the mixture (3). The samples containing the slowest moving bands are the products obtained from Au11−7 and from the mixture; these samples were found to contain Au25(SG)18 clusters by ESI-MS. These bands are not present when Au11−8 is used in the ligand exchange. Taken together, the optical studies, gel electrophoresis, and mass spectrometry results suggest that glutathione exchange with Au11−7 or mixtures including Au11−7 leads to core growth and the production of Au25(GS)18 as the major cluster species. Even small amounts of Au11−7 in the mixture lead to the production of predominately Au25(GS)18. Au11−8, on the other hand, does not form Au25(GS)18. Some smaller clusters are observed in both PAGE and ESI-MS analysis of all of the cluster samples that are likely due to some amount of 13430

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

Au11−8 is used as the starting material. However, when these solutions were kept under reaction conditions for 24 h, the exchanged clusters began to decompose, as evidenced by the precipitation of a white powder and a loss of color in the water layer. On the other hand, if Au11−7 was used as the starting material, formation of Au25(GS)18 was observed at 30 °C, as evidenced by increased absorbance at 670 nm. These larger ligand-exchanged clusters were stable under the reaction conditions for at least 24 h. When the temperature for the exchange was increased above 35 °C and a large excess of glutathione was introduced (430 equiv), both undecagold starting materials produced Au25(GS)18. The structure of the undecagold precursor has the strongest effect on the outcome of the reaction but increasing reaction temperature can also lead to production of more Au25(GS)18. Use of Au11−8 in ligand-exchange reactions with low glutathione:undecagold ratios and low temperatures forms products that have smaller core sizes. In contrast, starting with Au11−7 or the mixture, or increasing the reaction temperature leads primarily to Au25 regardless of the other conditions. These results suggest that product formation depends strongly on the stability of the precursor particle under the ligand-exchange reaction conditions. Upon the basis of our evaluation of the influence of each reaction parameter, we have determined that the best conditions to preserve the small core size of undecagold during ligand exchange with water-soluble thiols include starting with Au11−8 and conducting the exchange at 35 °C with 60 or fewer equivalents of incoming ligand. Under these conditions, the ligand-exchange products do not show absorbance at 670 nm in the UV−visible spectrum and, therefore, suggest that Au25 is not formed and particles with small size are predominant. If Au25 is desired, one should start with Au11− 7 or the mixture or increase the reaction temperature during the ligand exchange.

Figure 6. 1 H NMR spectra (recorded in CD 2 Cl 2 ) of [Au11(PPh3)8Cl2]Cl (A) and Au11(PPh3)7Cl3 (B) under ligand exchange reaction conditions that examine the relative thermal stability of the two forms. The lower spectra, obtained after keeping the undecagold starting materials in CHCl3 solutions at elevated temperature for the time required for ligand exchange, show that [Au11(PPh3)8Cl2]Cl is more stable at elevated temperature.



CONCLUSION We have discovered that two distinct forms of triphenylphosphine-stabilized undecagold exhibit significantly different ligand exchange reactivity even though they have the same Au core and nearly the same ligand shell. After isolating, characterizing and synthesizing each form, we monitored and evaluated the ligand exchange reactivities and cluster stabilities of both materials. Ligand exchange reactions carried out between glutathione and the two types of clusters revealed that exchange reactions of Au11−7 or a mixture of Au11−7 and Au11−8 produce predominantly a larger cluster, Au25. Analogous exchange reactions of pure Au11−8 produced only smaller (dcore ∼ 0.8 nm) particles. These results provide insight into the complex reactivity of Au11 and demonstrate for the first time that subtle changes in ligand shell composition can influence both particle stability and ligand exchange mechanisms. This unexpected discovery provides insight into apparent discrepancies in the literature concerning the formulation of these clusters and the products of ligand exchange reactions conducted using the two forms. A reexamination of each of the previous reports, focusing on the optical spectra of the starting clusters and the reaction products, suggests that the primary reason for the apparent discrepancies is the differences in the undecagold species used in each case. Our investigations also inform how reaction conditions can be optimized to control the formation of the ligand-exchanged product. If the aim is to

Other Reaction Parameters Have Less Influence than the Core Size: Optimized Ligand Exchange Conditions. The results described above show that cluster stability may be a key to the differences in ligand exchange reactivity of triphenylphosphine-stabilized undecagold. However, differences in the reaction conditions used in the previously reported studies could have influenced the exchange outcome. For example, under our original conditions, Au11−8 was exchanged with 20 equiv of thiol ligands at 55 °C (bath temperature) under air in CHCl3.18 Shichibu et al.20 used a mixture of the undecagold forms (as indicated by starting UV−visible spectra), heated the reaction to 55 or 35 °C, and used larger amounts (430 or 60 equiv) of glutathione under both air and nitrogen atmospheres in the same solvent. It is possible that these other reaction parameters (particularly the temperature and the number of equivalents of incoming ligands), in addition to the nature of the starting clusters, might strongly influence the ligand exchange of the clusters. To examine the impacts of thiol concentration, reaction temperature, and reaction time on the identity of the product, we monitored a series of ligand exchange reactions via UV− visible spectroscopy (see Supporting Information). First, an excess of glutathione ligand was introduced (430 equiv) to exchange reactions with each undecagold cluster (Au11−8 and Au11−7) at different temperatures. It was found that, in general, such a large excess of glutathione does not lead to formation of Au25(GS)18 at temperatures below 30 °C if 13431

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

were obtained on a AB SCIEX Triple ToF 5600 with a Shimadzu Nexera UPLC front end (positive mode). All samples (1 mg/mL in water) were analyzed as loop injections using 50:50 Acetonitrile/H2O/ 0.1% formic acid. Single Crystal X-ray Characterization of Undecagold Clusters. The X-ray diffraction data for Au11(PPh3)7Cl3 were collected at 150(2) K using a Bruker Smart Apex II diffractometer and a synchrotron source (Advanced Light Source station 11.3.1, λ = 0.77490 Å). X-ray diffraction experiments for [Au11(PPh3)8Cl2]Cl were carried out on a Bruker Smart Apex diffractometer at 153(2) K using MoKα radiation (λ = 0.71073 Å). Absorption corrections were applied by SADABS.54 The dispersion values were calculated using WCROMER Program in WinGX.55 The structures were solved using direct methods with calculations of difference Fourier maps and refined with full-matrix least-squares methods based on F2. Nonhydrogen atoms were refined with anisotropic thermal parameters except those in a disordered solvent pentane molecule in Au11(PPh3)7Cl3. The H atoms in both structures were treated in calculated positions and refined in a rigid group model. In Au11(PPh3)7Cl3, one of the Ph-groups is disordered over two positions in the ratio 1:1 and as a result there is not full occupation for a CH2Cl2 solvent molecule (occupation factor = 0.5) contacted to this Ph-ring in the structure. There is another solvent molecule, pentane, that is disordered over two positions around an inversion center as well. The H atoms in the disordered pentane molecules were not taken into consideration in the refinement. The C atoms in this solvent molecule were refined with isotropic thermal parameters and restrictions on the C−C distances; the standard C−C distances were used as targets for corresponding C−C bonds. In the crystal structure of [Au11(PPh3)8Cl2]Cl, the Cl− anion and solvent molecules (two CH2Cl2 and four CH3CH2OH) are disordered and form a disordered network via H-bonds. They were treated by SQUEEZE.56 Correction of the X-ray data by SQUEEZE (801 electron/cell) is close to the required values (820 electron/cell). All calculations were performed using the SHELXTL (v. 6.10) package (Bruker AXS, Madison, WI). Crystal data for Au11(PPh3)7Cl3: C129H112Au11Cl4P7, Mr = 4187.41, 0.30 × 0.04 × 0.005 mm, monoclinic, P21/n, a = 17.864(3) Å, b = 25.801(5) Å, c = 26.912(5) Å, β = 91.809(3)°, V = 12398(4) Å3, Z = 4, ρcalcd = 2.243 g cm−3, μ = 16.329 mm−1, 2θmax = 58.20°, T = 150(2) K, 211095 measured reflections, 25642 independent reflections [Rint = 0.0586], 1378 parameters, R1 and wR2 = 0.0347 and 0.0822 (I > 2σ(I)); 0.0573 and 0.0935 (all), GOF = 1.069 for all 25642 reflections, max/min residual electron density +3.786/−1.766 e Å−3. Crystal data for [Au11(PPh3)8Cl2]Cl: C154H148Au11Cl7O4P8, Mr = 4725.27, 0.38 × 0.35 × 0.02 mm, monoclinic, P21/c, a = 22.5421(15) Å, b = 18.0509(12) Å, c = 34.593(2) Å, β = 96.0670(10)°, V = 13997(2) Å3, Z = 4, ρcalcd = 2.242 g cm−3, μ = 11.760 mm−1, 2θmax = 56.64°, T = 153(2) K, 111788 measured reflections, 32960 independent reflections [Rint = 0.0737], 1486 parameters, R1 and wR2 = 0.0484 and 0.1045 (I > 2σ(I)); 0.0886 and 0.1144 (all), GOF = 1.040 for all 32960 reflections, max/min residual electron density +3.923/−3.808 e Å−3. Synthetic Procedures. Synthesis of Triphenylphosphine-Stabilized Undecagold Clusters. The synthesis of Au11 (producing a mixture of Au11(PPh3)7Cl3 (Au11−7) and [Au11(PPh3)8Cl2]Cl) (Au11−8) followed the previously reported method.18 Briefly, 55 mL of absolute EtOH was added to a 100 mL round-bottom flask containing 1.00 g (2.02 mmol) Au(PPh3)Cl. The cloudy white suspension was stirred while finely ground NaBH4 (76 mg, 2.02 mmol) was added in small portions over 15 min (∼1 addition/min). The solution color became yellow, light brown, and eventually dark brown over the course of the additions. After stirring at room temperature for 2 h, the mixture was poured into hexanes (1 L) and allowed to precipitate overnight (∼20 h). The brown precipitate was collected on a medium porosity fritted funnel and washed with hexanes (4 × 15 mL), CH2Cl2/hexanes (1:1, 4 × 15 mL), and CH2Cl2/hexanes (3:1, 1 × 10 mL). The remaining orange/brown solid was dissolved and washed through the frit with CH2Cl2 (∼40 mL). Crystallization by vapor diffusion of hexanes/CH2Cl2 at 4 °C (described in the next section) produced a mixture of Au11−7 as

preserve a small core size during exchange, one should employ Au11−8, keep the temperature at or below 50 °C, and use only a small excess of thiol (98%, Aldrich), 40% 19:1 acrylamide:bis(acrylamide) solution (Biorad), ammonium persulfate (≥98%, Sigma), TEMED (≥98%, tetramethylethylenediamine, Biorad), Tris Base (≥99%, CalBioChem), hydrochloric acid (≥99%, EMD Millipore), and glycine (≥98.5%, J.T. Baker) were used as received. Sephadex G-50 Superfine was purchased from GE Healthcare. Silica gel (grade 62, 60−200 Mesh) was purchased from EMD. Thiocholine (N,N,N-trimethylammoniumethanethiol, TMAT) trifluoroacetate was synthesized according to the published procedure.51,52 Dichloromethane was distilled from calcium hydride prior to use. CHCl3 was run through a plug of basic alumina prior to use. 18.2 M Ω-cm deionized water was used for all synthetic and purification processes. Au(PPh3)Cl was synthesized from HAuCl4 and PPh3 according to a known procedure.53 All other reagents and solvents were purchased from Aldrich or Mallinckrodt and used as received. Analytical Procedures. Nuclear magnetic resonance (NMR) spectra were collected at 25 °C on a Varian Unity Inova 300 MHz instrument equipped with a 4-channel probe (31P, 121.43 MHz). For 1 H NMR spectroscopy, the spectra were collected from samples dissolved in CD2Cl2 or D2O, and chemical shifts were referenced to the residual proton resonance of the solvent. For 1H-decoupled 31P NMR spectroscopy, the spectra were collected from nanoparticle samples dissolved in CD2Cl2 and referenced to 85% H3PO4 (external standard). UV−visible spectra (200−850 nm) of nanoparticle samples in CH2Cl2 were obtained on an Ocean Optics USB2000 spectrometer or Hewlett-Packard 8453 diode array instrument with a fixed slit width of 1 nm using 1 cm quartz cuvettes. Polyacrylamide gel electrophoresis was carried out by the same procedure reported in the literature.24 The samples were dissolved in a 5% (v/v) aqueous glycerol solution (about 5 mg/mL) and 30 μL aliquots were loaded onto the gel. The electrospray ionization mass spectra of glutathione-protected clusters 13432

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

orange needles and Au11−8 as red plates (total product mass ∼180 mg). Crystallization of Triphenylphosphine-Stabilized Undecagold Clusters. The CH2Cl2 solution obtained after washing the product from the frit was divided (3 × ∼13 mL) and placed in 20 mL scintillation vials. The open vials were placed upright in 100 mL media bottles, and hexanes was carefully added to the bottles to prevent it from going into the vials. When the hexanes levels around the vials were above the CH2Cl2 levels but below the rims of the vials, the media bottles were capped and placed in the refrigerator at ∼4 °C. Over 7−10 days, crystals of Au11−7 and Au11−8 formed, and light orange or colorless solution remained in the vials. The solution was removed with a pipet, and the crystals were washed with ∼2 mL hexanes and isolated by filtration or decantation of wash solvent followed by evaporation of residual solvent under a stream of N2. After placing a mixed sample of crystals on filter paper under a microscope, the orange needles and red plates were mechanically separated using tweezers. The spectral data for each crystal type are as follows. Au11(PPh3)7Cl3 (orange needles): 1H NMR (300 MHz, 23 °C, CD2Cl2) δ (ppm) = 7.40 (br t), 6.89 (dd), 6.59 (dd); 31P NMR (121.43 MHz, 23 °C, CD2Cl2, vs H3PO4) δ (ppm) = 52.9; UV−vis (CH2Cl2) λmax (nm) = 240, 308, 420. [Au11(PPh3)8Cl2]Cl (red plates): 1H NMR (300 MHz, 23 °C, CD2Cl2) δ (ppm) = 7.32 (br t), 6.94 (dd), 6.68 (dd); 31P NMR (121.43 MHz, 23 °C, CD2Cl2, vs H3PO4) δ (ppm) = 52.2; UV−vis (CH2Cl2) λmax (nm) = 240, 312, 416. Crystallization of [Au11(PPh3)8Cl2]Cl for X-ray Analysis. X-ray quality crystals of Au11−8 were crystallized from a mixture of Au11− 7 and Au11−8 (8:1 ratio by NMR, 24 mg). The mixture was dissolved in 5 mL of CH2Cl2 in a 20 mL scintillation vial. Octane was added until precipitation was observed (∼3 mL). Then CH2Cl2 (10 mL) was added to dissolve all precipitate. The vial was capped with a septum and a needle that was open to the air. Over 7 days, the CH2Cl2 evaporated and left ∼3 mL of solution. Red crystals formed on the sides of the vial, and light yellow solution that contained a few crystals remained in the vial. The solution was removed with a pipet, and the crystals were washed twice with 1 mL of octane. Most of the wash solvent was removed by pipet and residual solvent was evaporated under a stream of N2. Red plates removed from the wall of the vial were suitable for single crystal X-ray diffraction. Crystallization of Au11(PPh3)7Cl3 for X-ray Analysis. Small X-ray quality crystals of Au11−7 were obtained from the mixture of crystals produced during the vapor diffusion crystallization of the mixture from CH2Cl2/hexane described in the section Crystallization of Triphenylphosphine-Stabilized Undecagold Clusters above. Attempts to produce larger single crystals were unsuccessful probably due to the instability of the cluster. Given the small size of the crystals, the structure determination of a single crystal was conducted at the Advanced Light Source. Direct Synthesis of [Au11(PPh3)8Cl2]Cl. Au(PPh3)Cl (480 mg, 0.97 mmol) was dissolved in 20 mL of dichloromethane. A substoichiometric amount of NaBH4 (10 mg, 0.27 mmol) dissolved in 3 mL of absolute ethanol was added to this solution in one portion under stirring at RT. The reaction progress was monitored by TLC (CH2Cl2/CH3OH, v/v 5:0.5, the Rf of product is 0.4−0.5). The reaction mixture was stirred at RT for 24 h, and then solvents were evaporated. The residue was dissolved in a minimum amount of CH2Cl2 and the desired product was precipitated with 20 times this volume of pentane. The resulting mixture was centrifuged, and the supernatant was discarded. The residue was stirred with pentane (20 mL) and centrifuged, and the supernatant discarded. This procedure was repeated. The final solid was dissolved in CH2Cl2, transferred to a round-bottom flask, and the solvent was evaporated to give the crude product. This material was dissolved in a minimum amount of CH2Cl2 and loaded onto a silica gel column packed with CH2Cl2/CH3OH (25:1 v/v). The product was eluted with CH2Cl2/CH3OH 10:1 to 5:1 mixture to give desired product (59 mg, 17% yield) and recovered gold salt (360 mg). The recovered starting material can be reduced to yield additional product through the following procedure. Au(PPh3)Cl (360 mg, 0.72 mmol) was dissolved in 15 mL of CH2Cl2 and used for

further reduction with NaBH4 (8.4 mg, 0.22 mmol) in 2.5 mL of ethanol. The reaction and workup were carried out in the same manner as the first reaction. After chromatography, 68 mg of Au11−8 was obtained bringing the overall yield to 127 mg (38%). Crystallization from CH2Cl2/hexanes is recommended to obtain pure product. The spectral data for this material is the same as that described for the crystals above. Traces of Au(PPh3)Cl can influence the outcome of ligand exchange reactions, so it is important that the final undecagold cluster not contain any of this material. Direct Synthesis of Au11(PPh3)7Cl3. Au(PPh3)Cl (500 mg, 1.01 mmol) was dissolved in 25 mL of THF. NaBH4 (190 mg, 5.05 mmol) dissolved in 25 mL of absolute ethanol was added to this solution in one portion under stirring at RT. The clear colorless solution immediately became dark brown, and bubbles were observed. The reaction mixture was stirred at RT for 2 h and then was poured into pentane (500 mL) and allowed to precipitate for 2 h. The brown precipitate was collected on a medium-porosity fritted funnel and washed with hexanes (4 × 7.5 mL) and CH2Cl2/hexanes (1:1, 4 × 7.5 mL). The remaining solid was then dissolved and washed through the frit into a tared vial or flask using 5 mL portions of CH2Cl2 and 2 min agitations until no color remained in the CH2Cl2. The solvent was evaporated by rotary evaporation or flowing N2 until constant mass of the desired product was obtained (250 mg, 66% yield). The spectral data for this material is the same as that described for the crystals above. Ligand Exchange Procedures. Ligand Exchange of Triphenylphosphine-Stabilized Undecagold Clusters (Mixture of Au11−8 and Au11−7) with Glutathione. The synthesis of glutathionestabilized Au clusters from a mixture of Au11−7 and Au11−8 followed the previously reported method for ligand exchange with Au11−8.18 An aqueous solution (13 mL) of glutathione (26 mg, 0.08 mmol) was added to a CHCl3 solution (13 mL) of the mixture of Au11−7 (15 mg, 0.004 mmol) and Au11−8 (20 mg, 0.004 mmol) and deoxygenated with Ar for 2 min. The biphasic mixture was stirred rapidly at 50 °C under N2 for 3 h. After cooling to room temperature, the water layer was isolated in a separatory funnel and washed with CH2Cl2 (20 mL × 3). The solution was concentrated to 1 mL using a rotary evaporator at room temperature and eluted on a Sephadex 50 column with water to give 20 mg of final product as a brown powder. Ligand Exchange of [Au11(PPh3)8Cl2]Cl with Glutathione. An aqueous solution (8 mL) of glutathione (15 mg, 0.05 mmol) was added to a CHCl3 solution (8 mL) of Au11−8 (20 mg, 0.005 mmol) and deoxygenated with Ar for 2 min. The biphasic mixture was stirred rapidly at 50 °C under N2 for 3 h. After cooling to room temperature, the water layer was isolated in a separatory funnel and washed with CH2Cl2 (20 mL × 3). The solution was concentrated to 0.8 mL using a rotary evaporator at room temperature and eluted on a Sephadex 50 column with water to give 10 mg of final product as a brown-orange powder. Ligand Exchange of Au11(PPh3)7Cl3 with Glutathione. An aqueous solution (10 mL) of glutathione (19 mg, 0.06 mmol) was added to a CHCl3 solution (10 mL) of Au11−7 (26 mg, 0.006 mmol) and deoxygenated with Ar for 2 min. The biphasic mixture was rapidly stirred at 50 °C under N2 for 3 h. After cooling to room temperature, the water layer was isolated in a separatory funnel and washed with CH2Cl2 (20 mL × 3). The solution was concentrated to 1 mL using a rotary evaporator at room temperature and eluted on a Sephadex 50 column with water to give 10 mg of final product as a brown powder. Stability Study Procedures. Stability Studies of Triphenylphosphine-Stabilized Undecagold Clusters. A CHCl3 solution (5 mL) of Au11−7 (10 mg, 0.002 mmol) was deoxygenated with Ar for 2 min and stirred at 50 °C under N2 for 150 min. The solution was cooled to room temperature, and the solvent was evaporated. The solid was redissolved in CH2Cl2, and the solvent was evaporated for a second time to reduce the chloroform signal in the 1H NMR spectrum. Finally, the sample was dissolved in CD2Cl2, and the 1H NMR was recorded. This process was repeated using Au11−8 except that the solution was stirred at 50 °C under N2 for 210 min. The time was the only variable that was changed during these experiments. 13433

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society



Article

(11) Brown, L. O.; Hutchison, J. E. J. Am. Chem. Soc. 1997, 119, 12384. (12) McPartlin, M.; Mason, R.; Malatesta, L. J. Chem. Soc. D 1969, 334. (13) Malatesta, L.; Naldini, L.; Simonetta, G.; Cariati, F. Coord. Chem. Rev. 1966, 1, 255. (14) Grant, C. D.; Schwartzberg, A. M.; Yang, Y.; Chen, S.; Zhang, J. Z. Chem. Phys. Lett. 2004, 383, 31. (15) Bartlett, P. A.; Bauer, B.; Singer, S. J. J. Am. Chem. Soc. 1978, 100, 5085. (16) Jahn, W. J. Struct. Biol. 1999, 127, 106. (17) Safer, D.; Hainfeld, J.; Wall, J. S.; Reardon, J. E. Science 1982, 218, 290. (18) Woehrle, G. H.; Warner, M. G.; Hutchison, J. E. J. Phys. Chem. B 2002, 106, 9979. (19) This is the bath temperature. The reaction temperature is typically 5 °C lower. (20) Shichibu, Y.; Negishi, Y.; Tsukuda, T.; Teranishi, T. J. Am. Chem. Soc. 2005, 127, 13464. (21) Shichibu, Y.; Negishi, Y.; Watanabe, T.; Chaki, N. K.; Kawaguchi, H.; Tsukuda, T. J. Phys. Chem. C 2007, 111, 7845. (22) Yang, Y.; Chen, S. Nano Lett. 2003, 3, 75. (23) Hadley, A.; Aikens, C. M. J. Phys. Chem. C 2010, 114, 18134. (24) Negishi, Y.; Nobusada, K.; Tsukuda, T. J. Am. Chem. Soc. 2005, 127, 5261. (25) Gautier, C.; Bürgi, T. J. Am. Chem. Soc. 2008, 130, 7077. (26) Spivey, K.; Williams, J. I.; Wang, L. Chem. Phys. Lett. 2006, 432, 163. (27) Cariati, F.; Naldini, L. Inorg. Chim. Acta 1971, 5, 172. (28) Walter, M.; Akola, J.; Lopez-Acevedo, O.; Jadzinksy, P. D.; Calero, G.; Ackerson, C. J.; Whetten, R. L.; Gronbeck, H.; Häkkinen, H. Proc. Natl. Acad. Sci. U. S. A. 2008, 105, 9157. (29) Bergeron, D. E.; Hudgens, J. W. J. Phys. Chem. C 2007, 111, 8195. (30) Nunokawa, K.; Onaka, S.; Ito, M.; Horibe, M.; Yonezawa, T.; Nishihara, H.; Ozeki, T.; Chiba, H.; Watase, S.; Nakamoto, M. J. Organomet. Chem. 2006, 691, 638. (31) Nunokawa, K.; Onaka, S.; Yamaguchi, T.; Ito, T.; Watase, S.; Nakamoto, M. Bull. Chem. Soc. Jpn. 2003, 76, 1601. (32) Bellon, P.; Manassero, M.; Sansoni, M. J. Chem. Soc., Dalton Trans. 1972, 1481. (33) Copley, R. C. B.; Mingos, D. M. P. J. Chem. Soc., Dalton Trans. 1996, 479. (34) Schulz-Dobrick, M.; Jansen, M. Z. Anorg. Allg. Chem. 2007, 633, 2326. (35) Albano, V. G.; Bellon, P. L.; Manassero, M.; Sansoni, M. J. Chem. Soc. D 1970, 1210. (36) Gutrath, B. S.; Englert, U.; Wang, Y.; Simon, U. Eur. J. Inorg. Chem. 2013, 2013, 2002. (37) Anderson, D. P.; Alvino, J. F.; Gentleman, A.; Qahtani, H. A.; Thomsen, L.; Polson, M. I. J.; Metha, G. F.; Golovko, V. B.; Andersson, G. G. Phys. Chem. Chem. Phys. 2013, 15, 3917. (38) Vollenbroek, F. A.; Van den Berg, J. P.; Van der Velden, J. W. A.; Bour, J. J. Inorg. Chem. 1980, 19, 2685. (39) Billings, S. B.; Mock, M. T.; Wiacek, K.; Turner, M. B.; Kassel, W. S.; Takeuchi, K. J.; Rheingold, A. L.; Boyko, W. J.; Bessel, C. A. Inorg. Chim. Acta 2003, 355, 103. (40) Hainfeld, J. F. Undecagold-Antibody Method. In Colloidal Gold: Principles, Methods, and Applications; Hayat, M. A., Ed.; Academic Press: San Diego, 1989; Vol. 2, p 415. (41) Hall, K. P.; Mingos, D. M. P. Homo- and Heteronuclear Cluster Compounds of Gold. In Progress in Inorganic Chemistry; John Wiley & Sons, Inc.: Hoboken, NJ, 1984; p 237. (42) Coffer, J. L.; Shapley, J. R.; Drickamer, H. G. Inorg. Chem. 1990, 29, 3900. (43) Mingos, D. M. Gold Bull. 1984, 17, 5. (44) Vollenbroek, F. A.; Bour, J. J.; van der Veden, J. W. A. Recl. Trav. Chim. Pays-Bas 1980, 99, 137.

ASSOCIATED CONTENT

S Supporting Information *

Additional characterization data (TEM, 1H and 31P NMR and UV−visible spectra) for Au11(PPh3)7Cl3 and [Au11(PPh3)8Cl2]Cl; UV−visible spectra of ligand exchange products at different times, temperatures, and with different ligands; and detailed synthetic procedures for ligand-exchanged clusters. This material is available free of charge via the Internet at http:// pubs.acs.org.



AUTHOR INFORMATION

Corresponding Author

[email protected] Present Address ‡

Chem11, LLC, 1672 East 23rd Avenue, Eugene, Oregon 97403, United States. Author Contributions †

L. C. McKenzie and T. O. Zaikova contributed equally.

Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS We thank J. Purcell and B. L. Baldock for assistance with PAGE analysis; E. Healy, L. Zakharov and S. Teat for assistance collecting and analyzing X-ray diffraction data; J. T. Morré for assistance obtaining mass spectral data; and J. C. Scotland and M. L. Jespersen for helpful discussion. This work was supported by the Air Force Research Laboratory (under Agreement Number FA8650-05-1-5041). L.C.M. acknowledges support from the National Science Foundation IGERT Program under Grant No. DGE-0549503. The Center for Advanced Materials Characterization in Oregon (CAMCOR) is supported by the W. M. Keck Foundation, the M. J. Murdock Charitable Trust, the Oregon Nanoscience and Microtechnologies Institute and the University of Oregon. The Biomolecular Mass Spectrometry Core of the Environmental Health Sciences Core Center at Oregon State University is supported, in part, by Award Number P30ES000210 from the National Institute of Environmental Health Sciences (NIEHS), National Institutes of Health (NIH). The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC0205CH11231.



REFERENCES

(1) Dahl, J. A.; Maddux, B. L. S.; Hutchison, J. E. Chem. Rev. 2007, 107, 2228. (2) Warner, M. G.; Hutchison, J. E. Synthesis and Assembly of Functionalization Gold Nanoparticles. In Functionalization and Surface Treatment of Nanoparticles; Baraton, M.-I., Ed.; American Scientific Publishers: Los Angeles, 2003; p 67. (3) Daniel, M.-C.; Astruc, D. Chem. Rev. 2003, 104, 293. (4) Erathodiyil, N.; Ying, J. Y. Acc. Chem. Res. 2011, 44, 925. (5) Saha, K.; Agasti, S. S.; Kim, C.; Li, X.; Rotello, V. M. Chem. Rev. 2012, 112, 2739. (6) Zhao, P.; Li, N.; Astruc, D. Coord. Chem. Rev. 2013, 257, 638. (7) Caragheorgheopol, A.; Chechik, V. Phys. Chem. Chem. Phys. 2008, 10, 5029. (8) Heinecke, C. L.; Ni, T. W.; Malola, S.; Mäkinen, V.; Wong, O. A.; Häkkinen, H.; Ackerson, C. J. J. Am. Chem. Soc. 2012, 134, 13316. (9) Woehrle, G. H.; Brown, L. O.; Hutchison, J. E. J. Am. Chem. Soc. 2005, 127, 2172. (10) Woehrle, G. H.; Hutchison, J. E. Inorg. Chem. 2005, 44, 6149. 13434

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435

Journal of the American Chemical Society

Article

(45) Hagen, A. P.; Vollenbroek, F. A.; Velden, J. W. A. V. D.; Bour, J. J.; Steggerda, J. J. Gold Cluster Compounds Containing the Au3, Au4, Au5, Au6, Au7, Au8, Au9, Au11, Au13 and Au55, Cores. In Inorganic Reactions and Methods; John Wiley & Sons, Inc.: Hoboken, NJ, 1991; p 339. (46) Bellon, P. L.; Cariati, F.; Manassero, M.; Naldini, L.; Sansoni, M. J. Chem. Soc. D 1971, 1423. (47) Zhu, M.; Eckenhoff, W. T.; Pintauer, T.; Jin, R. J. Phys. Chem. C 2008, 112, 14221. (48) Shichibu, Y.; Negishi, Y.; Tsunoyama, H.; Kanehara, M.; Teranishi, T.; Tsukuda, T. Small 2007, 3, 835. (49) Jin, R.; Qian, H.; Wu, Z.; Zhu, Y.; Zhu, M.; Mohanty, A.; Garg, N. J. Phys. Chem. Lett. 2010, 1, 2903. (50) Negishi, Y.; Chaki, N. K.; Shichibu, Y.; Whetten, R. L.; Tsukuda, T. J. Am. Chem. Soc. 2007, 129, 11322. (51) Warner, M. G.; Hutchison, J. E. Nat. Mater. 2003, 2, 272. (52) Kim, K.-T.; Zaikova, T.; Hutchison, J. E.; Tanguay, R. L. Toxicol. Sci. 2013, 133, 275. (53) Braunstein, P.; Lehner, H.; Matt, D. Inorg. Synth. 1990, 27, 218. (54) Sheldrick, G. M. SHELXTL v. 5.10, Structure Determination Software Suite; Bruker AXS: Madison, WI, 1998. (55) Kissel, L.; Pratt, R. H. Acta Crystallogr., Sect. A: Found. Crystallogr. 1990, A46, 170. (56) Van der Sluis, P.; Spek, A. L. Acta Crystallogr., Sect. A: Found. Crystallogr. 1990, A46, 194.

13435

dx.doi.org/10.1021/ja5075689 | J. Am. Chem. Soc. 2014, 136, 13426−13435