Studies on Mercury Adsorption Species and Equilibrium on Activated

Nov 13, 2017 - The effect of inlet Hg0 concentration and flue gas components on mercury ... Hydrogel Composite for Enhanced Removal of Mercury Ions...
0 downloads 0 Views 584KB Size
Subscriber access provided by READING UNIV

Article

Studies on mercury adsorption species and equilibrium on activated carbon surface Qiang Zhou, Yufeng Duan, Mingming Chen, Meng Liu, and Ping Lu Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/acs.energyfuels.7b02699 • Publication Date (Web): 13 Nov 2017 Downloaded from http://pubs.acs.org on November 14, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Energy & Fuels is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

Studies on mercury adsorption species and equilibrium

1 2

on activated carbon surface

3

Qiang Zhoua,b, Yufeng Duanb, Mingming Chenb, Meng Liub, and Ping Lua

4

a

Jiangsu Provincial Key Laboratory of Materials Cycling and Pollution Control, School of Energy and Mechanical Engineering, Nanjing Normal University, Nanjing 210042, China

5 6

b

Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of

7

Energy and Environment, Southeast University, Nanjing 210096, China

8

ABSTRACT: :Mercury adsorption capability of raw activated carbon (R-AC) and NH4Br modified

9

activated carbon (NH4Br-AC) was evaluated in a fixed-bed reactor. Effect of inlet Hg0 concentration

10

and flue gas components on mercury adsorption was investigated. The mercury adsorption species on

11

sorbent surface was analyzed by Programmed Temperature Desorption (TPD) method. Finally,

12

mercury adsorption equilibrium of R-AC and NH4Br-AC was explored. Mercury adsorption results

13

show that the mercury adsorption capability of NH4Br-AC is significantly larger than that of R-AC and

14

increased with higher inlet Hg0 concentration. O2 and NO promotes mercury adsorption on NH4Br-AC,

15

but SO2 inhibits the mercury adsorption. The TPD result shows that mercury adsorption on R-AC is

16

mainly physical in nature enhanced by chemisorption with the product of HgO. Mercury adsorption on

17

NH4Br-AC is in the major form of chemisorption with the product of HgBr2. O2 has little effect on the

18

mercury adsorption mechanism. SO2 reduces the generation of HgBr2, but promotes little of HgS

19

generation on NH4Br-AC. NO significantly improves the generation of Hg2(NO3)2 on NH4Br-AC.

20

Adsorption equilibrium analysis shows that Langmuir and Temkin equations are more suitable to

21

describe the mercury adsorption on R-AC, indicating the uniformity of R-AC surface. Mercury

22

adsorption on NH4Br-AC surface can be described well by Freundlich equation, illustrating the

*Correspondence author. Tel.: 86+025-85481253, E-mail address: [email protected] (Qiang Zhou)

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

23

non-uniformity of NH4Br-AC surface.

24

KEY WORDS: Activated carbon, Mercury adsorption, Mercury desorption, Adsorption species,

25

Adsorption equilibrium

26

1. Introduction

27

Mercury emission has attracted worldwide concern, because mercury is one of environmentally toxic

28

metals with the feature of volatility, bioaccumulation and persistence [1-3]. It is well known that coal

29

combustion is major anthropogenic source of mercury emission [4-6]. Therefore, worldwide scientists

30

and governments are devoting significant efforts to reducing mercury emission from coal-fired power

31

plants. It is generally agreed that mercury existing in coal-fired flue gas includes elemental mercury

32

(Hg0), oxidized mercury (Hg2+) and particle-bound mercury (HgP) [7-9]. HgP can be captured with fly

33

ash through Fabric Filters (FFs) or Electrostatic Precipitators (ESPs), and part of Hg2+ may be removed

34

if the power plant is equipped with wet flue gas desulfurization (WFGD) device [10,11]. However, due

35

to the high volatility and insolubility of Hg0, it is difficult to remove the Hg0 from flue gas by

36

conventional pollution control devices [12,13]. The mercury emitted into the atmosphere can form

37

methyl mercury, which is seriously harmful to the environment. [14].Therefore, in order to reduce

38

mercury emission from coal-fired power plant, it is necessary to develop other advanced control

39

technologies to reduce mercury emission.

40

Activated carbon injection (ACI) upstream of FF or ESP has been considered as the most effective

41

and promising technology for reducing mercury emission from power plants [15,16]. In order to further

42

improve the ACI technology, many mercury removal sorbents have been developed. To date,

43

brominated activated carbon has been confirmed to be an effective sorbent [17,18], but finding out the

44

mercury adsorption mechanism of brominated activated carbon still be a challenge. Sasmaz et al [19]

ACS Paragon Plus Environment

Page 2 of 27

Page 3 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

45

utilized extended X-ray absorption fine structure (EXAFS) and X-ray photoelectron spectroscopy (XPS)

46

spectroscopy methods to analyze the binding mechanism of Hg0 adsorption on brominated powder

47

activated carbon surface and found that gas-phase Hg0 was oxidized by the brominated carbon and

48

coordinated to two Br atoms. Zhou et al [20] applied adsorption kinetic and thermodynamic methods to

49

analyze the Hg0 adsorption on brominated activated carbon and found that Hg0 adsorption on

50

brominated activated carbon was spontaneous and needed more activated energy compared to that of

51

raw activated carbon because of the enhancement of chemisorption. Liu et al [21] used first principles

52

quantum mechanical theoretical methods which based on density functional theory to study the

53

mercury–bromine adsorption mechanism on carbonaceous surface and found that the bromine atom

54

had a positive effect on Hg0 adsorption resulted by the transfer of charge. The Hg-Br adsorption on

55

carbonaceous surface was highly thermally stable than that of HgBr2. Rupp et al [22] studied the

56

interaction between Hg0 and other flue gas components including SO2 and NOx on brominated AC

57

fibers. It was found that NO and NO2 were helpful to promote Hg0 oxidation on brominated AC fiber,

58

but SO2 inhibited the Hg0 adsorption. SO2 and NOx in flue gas can lead to the Br deactivation on the

59

brominated AC fiber surface. To date, although researches on mercury adsorption by brominated

60

activated carbon have been widely conducted, the high complexity mercury adsorption procedure leads

61

to the limited understanding of mercury adsorption mechanism and the demand of further research.

62

The Programmed Temperature Desorption (TPD) method is an effective method for identifying

63

mercury compounds species on solid samples including iron-based sorbents [23], fly ash [24,25] and

64

WFGD gypsum [26]. It takes advantage of the fact that the order of mercury compounds desorption

65

temperature is HgCl2/HgBr2