Sulfur-Tolerant Molybdenum Carbide Catalysts Enabling Low

Aug 18, 2017 - Low-temperature hydrogenation of carbonyl compounds can greatly improve the thermal stability of fast pyrolysis bio-oil, thereby enabli...
1 downloads 8 Views 2MB Size
This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Article pubs.acs.org/EF

Sulfur-Tolerant Molybdenum Carbide Catalysts Enabling LowTemperature Stabilization of Fast Pyrolysis Bio-oil Zhenglong Li,† Jae-Soon Choi,*,† Huamin Wang,‡ Andrew W. Lepore,† R. Maggie Connatser,† Samuel A. Lewis,† Harry M. Meyer, III,† Daniel M. Santosa,‡ and Alan H. Zacher‡ †

Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, Tennessee 37830, United States Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99352, United States



S Supporting Information *

ABSTRACT: Low-temperature hydrogenation of carbonyl compounds can greatly improve the thermal stability of fast pyrolysis bio-oil, thereby enabling long-term operation of upgrading reactors which generally require high temperatures to achieve deep deoxygenation. The state-of-the-art hydrogenation catalysts, precious metals such as ruthenium, although effective in carbonyl hydrogenation, deactivate due to high sulfur sensitivity. In the present work, we showed that molybdenum carbides were active and sulfur-tolerant in low-temperature conversion of carbonyl compounds. Furthermore, due to surface bifunctionality (i.e., both metallic and acid sites present), carbides catalyzed both CO bond hydrogenation and C−C coupling reactions. Combined, these reactions transformed carbonyl compounds to more stable and higher molecular weight oligomeric compounds while consuming less hydrogen than pure hydrogenation. The carbides proved to be resistant to other deactivation mechanisms including hydrothermal aging, oxidation, coking, and leaching. These properties enabled carbides to achieve and maintain good catalytic performance in both aqueous-phase furfural conversion and real bio-oil stabilization in the presence of sulfur. This finding strongly suggests that molybdenum carbides can provide a catalyst solution necessary for the development of practical bio-oil stabilization technology.



INTRODUCTION

precious metal and other transition metal catalysts can catalyze hydrogenation of carbonyls into more stable molecules.8,9 Ruthenium (Ru) is especially active in aqueous-phase hydrogenation of carbonyls, generally outperforming other platinum group metals.10−13 The high oxophilicity of Ru is proposed to facilitate H2O chemisorption, which in turn enables an easier CO hydrogenation pathway.10 Excellent performance of Ru in reducing the carbonyl content of raw bio-oil has also been demonstrated in the temperature range of 80−160 °C.6,7 At such low temperatures, bio-oil, which contains 10−30% H2O, is in a condensed liquid phase, and therefore, the H2O is expected to play an important role in carbonyl hydrogenation. On the other hand, ruthenium and other metal-based catalysts are highly sensitive to sulfur impurities in the reactor feed, and deactivate quickly due to active-site poisoning.14 Fast pyrolysis bio-oil can contain sulfur at different levels depending on feedstock. For instance, woody biomass bio-oil typically has less than 100 ppm of sulfur. Even though this is a relatively small amount, it can cause significant catalyst deactivation. Wang et al.7 recently observed that Ru/TiO2 deactivated during stabilization of two different bio-oils (respectively, having 300 °C required for hydrodeoxygenation and zeolite cracking), these highly reactive carbonyl compounds tend to polymerize, leading to extensive and rapid coking, catalyst deactivation, and bed fouling/ plugging.5 Stabilization of bio-oil (i.e., conversion of reactive molecules into compounds less prone to thermally induced polymerization) is therefore a critical first step for successful upgrading (e.g., hydroprocessing) with long-term process operability.6,7 Of the numerous physical and chemical methods investigated for bio-oil stabilization, catalytic low-temperature hydrogenation of carbonyls appears particularly promising.6,7 Reduced © 2017 American Chemical Society

Received: June 16, 2017 Revised: July 26, 2017 Published: August 18, 2017 9585

DOI: 10.1021/acs.energyfuels.7b01707 Energy Fuels 2017, 31, 9585−9594

Article

Energy & Fuels

Table 1. Summary of Furfural Conversion, Monomeric Liquid Product Distribution and Hydrogen Consumption Obtained from Batch-Reactor Aqueous-Phase Hydrogenation of Furfural without and with Thiophene (380 ppmw S) catalyst 5% Ru/C

temp./°C 150

120 Ni-Mo2C

150

120

Mo2C

150

no cat.

150

run code c

1 2c 3d 4d 5d 6d 7e 8e 9f 10f 11f 12f 13f 14f 15g 16g 17g 18h 19h 20

S content/ppm

furfural conv./%

FA/%

TFA/%

CPL and CPO/%

othersa/%

H2 consumptionb/mmol

0 0 380 380 380 0 0 380 0 380 380 380 380 0 0 380 380 0 380 0

>99 99 76 27 20 20 99 27 83 77 85 89 92 96 49 49 57 64 59 8

0 0 37 0 0 0 0 0 11 9 0 0 0 0 18 24 8 0 0 0

60 19 0 0 0 0 47 0 0 0 0 0 0 0 0 0 0 0 0 0

2 3 4 2 0 0 0 3 8 6 9 18 14 15 0 1 1 0 1 0