Surface Acid–Base Properties of Anion-Adsorbed Species at Pt(111

Mar 15, 2016 - ... Acid–Base Properties of Anion-Adsorbed Species at Pt(111) Electrode Surfaces in Contact with CO2-Containing Perchloric Acid Solut...
0 downloads 0 Views 2MB Size
Subscriber access provided by ORTA DOGU TEKNIK UNIVERSITESI KUTUPHANESI

Article

Surface Acid-Base Properties of Anion Adsorbed Species at Pt(111) Electrode Surfaces in Contact with CO Containing Perchloric Acid Solutions 2

Ricardo Martínez-Hincapié, Antonio Berná, Antonio Rodes, Victor Climent, and Juan M. Feliu J. Phys. Chem. C, Just Accepted Manuscript • DOI: 10.1021/acs.jpcc.6b00589 • Publication Date (Web): 15 Mar 2016 Downloaded from http://pubs.acs.org on March 16, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Physical Chemistry C is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Surface Acid-Base Properties of Anion Adsorbed Species at Pt(111) Electrode Surfaces in Contact with CO2 Containing Perchloric Acid Solutions. R. Martínez-Hincapié, A. Berná, A. Rodes, V. Climent, J.M. Feliu*.

Instituto de Electroquímica y Departamento de Química Física. Universidad de Alicante. 03080 Alicante. Spain Abstract: Carbonate and bicarbonate adsorption on Pt(111) electrodes from CO2 saturated acidic solutions is investigated by cyclic voltammetry and Fourier Transform Infrared Reflection Absorption Spectroscopy (FT-IRRAS). Spectroscopic results show carbonate and bicarbonate adsorption even at pH=1, where bulk concentration of these anions is negligible. Moreover, analysis of the potential dependence of band intensities corresponding to adsorbed carbonate and bicarbonate reveals an effect of the electrode potential on the surface acid-base equilibrium. In this regards, increasing potentials favor bicarbonate deprotonation, leading to carbonate formation. A tentative thermodynamic analysis is given to rationalize these trends. 1. Introduction. The understanding of interfacial properties is a challenging topic in physical electrochemistry and requires careful experiments combining different techniques. One of the classical subjects in this field deals with the specific adsorption of anions. This topic has already been addressed on mercury electrodes1 and extended later to coinage2-4 and platinum group metal electrodes58

to explore the validity of double layer models. These investigations have important

implications in practical electrochemistry, since anion adsorption competes with other molecular species, either reagents or intermediates, in electrocatalytic reactions, thus hindering the reaction rate. As an example, oxygen reduction shifts to lower potentials in 1 ACS Paragon Plus Environment

The Journal of Physical Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

sulphuric acid as compared with perchloric acid solutions9 because sulphate adsorption influences relevant steps in the activation mechanism. Moreover, if the anion adsorption strength is high enough, the 4e reduction process to water will stop at the peroxide stage (2e).10 In this case, anion adsorption not only affects the mechanism but also the stoichiometry of the overall reaction. The fact that anion adsorption at platinum electrodes involves charge transfer was shown many years ago by using the CO-displacement methodology.11-13 This experiment was used to clarify the nature of the adsorption processes which are at the origin of the voltammetric profiles recorded for platinum single crystal electrodes. The obtained results helped in the understanding of the coulometric relationships related to the stoichiometry of surface confined reactions.14 Moreover, important interfacial parameters, such as the potentials of zero charge of platinum-group metals, were defined in connection with these experiments and anion adsorption was shown to take place at potentials higher than the potential of zero total charge.7,

15

Thermodynamic analysis allowed the determination of parameters associated to

this process, such as charge transfer numbers and energies of adsorption.6, 8, 16-18 When the study includes a surface acid base equilibrium, pH variation allows discrimination of the nature of the adsorbed species.4,

19

In this way, it was demonstrated that Pt(111) in contact with

sulphuric acid solutions led to sulphate adsorption,19 in agreement with results from other experimental techniques.20 These studies demonstrate that composition of the interphase can often be significantly different from that of the bulk of the solution. For instance, sulfate is adsorbed on the Pt(111) surface from sulfuric acid solutions, while the predominant species in the bulk is bisulfate.19 A similar situation has been observed with anions ((bi)oxalate, (bi)malonate and (bi)succinate coming from several dicarboxylic acids. In general, a lower pKa is observed for the adsorbed species as compared with the pKa of the species in solution.21-22 By comparing dicarboxylic

2 ACS Paragon Plus Environment

Page 2 of 27

Page 3 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

acids with different lengths of the alkyl chain, it was demonstrated that the effect of the electric field on the pKa of the uncoordinated carboxylate decreases as its separation from the electrode surface increases.21-22 Another interesting example is the adsorption of carbonate and bicarbonate from perchloric acid solutions saturated with CO2.23-26 Taking into account the corresponding pKa values, the concentration of anions in the bulk should be negligible in acidic solutions (e.g. around 10-7 and 10-17 M, respectively, for bicarbonate and carbonate in solutions of pH 1) and thus unable to generate the measured voltammetric adsorption charges.27 However, the analysis of in situ Fourier Transform InfraRed Reflection Absorption (FT-IRRAS) spectra, based on Density Functional Theory (DFT) calculations for band assignment, pointed out that the adsorbed layer was formed by bicarbonate and carbonate anions, with bicarbonate being adsorbed at lower potentials, while carbonate bands appeared at higher potentials.25 This trend was pH-dependent, in such a way that the onset of carbonate adsorption moved to lower potentials as the pH is made less acidic.25 From the latter results, it can be assumed that adsorbed bicarbonate and carbonate anions are present on the electrode surface in the acidic CO2-containing solutions. From the analysis of the pH- and potential-dependence of the corresponding band intensities, which can be related to changes in the carbonate and bicarbonate surface coverages, the conditions (pH and potential) to reach equal population of both adsorbed species can be found and used to estimate the surface pKa value. In this paper, we investigate the surface equilibrium between adsorbed carbonate and bicarbonate at Pt(111) electrodes in contact with acidic solutions of a non-specifically adsorbing supporting electrolyte. The effect of pH and potential on this equilibrium is analyzed in connection to the corresponding concepts of surface charge density and, thus, the electric field at the electrode surface.

3 ACS Paragon Plus Environment

The Journal of Physical Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

2. Experimental. Platinum single crystal electrodes were oriented, cut and polished from single crystal beads as reported previously.28 Before each experiment, the electrode was flame annealed in a Bunsen flame, cooled down in a reducing atmosphere containing H2 + Ar and protected with water in equilibrium with this gas mixture to prevent contamination and the appearance of surface defects related to oxygen adsorption. The voltammetric experiments were carried out in a classical three electrode configuration, at room temperature. Working solutions were first deaerated by Argon bubbling and, after checking solution cleanliness by voltammetry, saturated with CO2. The counter electrode was a large coiled platinum wire, while a reversible hydrogen electrode (RHE) was used as reference, connected to the cell through a Luggin capillary. Potentials were converted to the SHE scale and are given in this scale throughout the paper. The measurements were performed with a EG&G PARC 175 signal generator, an eDAQ EA161 potentiostat and an eDAQ e-corder ED401 recording system. The pH of the solution was determined with a Crison 507 pH-meter. In situ external reflection infrared experiments were carried out with a Nicolet 8700 (Thermo Scientific) spectrometer equipped with a MCT-A detector using p-polarized light and with a spectral resolution of 8 cm-1. The glass spectroelectrochemical cell was equipped with a prismatic CaF2 window bevelled at 60°, a platinum counter electrode and a RHE reference electrode. The Pt(111) working electrode used in these experiments was ca. 4.5 mm in diameter and was prepared and treated before experiments in a similar way as the smaller samples used in the voltammetric experiments. The spectra are plotted in absorbance units (log(R/R0)) by referring the single beam reflectance spectrum collected at the sample potential (R) to that collected at the reference potential (R0), which was chosen at 0.10 V. As the adsorption / desorption processes studied in this work are reversible with respect to the electrode potential, the so-called SNIFTIR (substractively normalised FTIR 29) is used. Thus, 10

4 ACS Paragon Plus Environment

Page 4 of 27

Page 5 of 27

sets of 100 interferograms were collected alternately at the sample and reference potentials. Positive- and negative-going bands in the spectra correspond, respectively, to species being formed/consumed when collecting the sample single beam spectrum.

3. Results and discussion. 3.1. Voltammetric and Spectroscopic results E/V vs RHE 0.0

0.2

0.4

0.6

E/V vs RHE 0.8

0.0

0.2

0.4

0.6

0.8

100

200

A

c d

75

B

c d

150

a

-2

25

a

b

50

b 0

0 -25

-50

-50

-100

-75

-2

100

q/µCcm

50

j/µΑcm

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

-150

c,d

c,d

-100

-200 0.0

0.2

0.4

0.6

E/V vs SHE

0.8 -0.2

0.0

0.2

0.4

0.6

0.8

E/V vs SHE

Figure 1. Cyclic Voltammograms (a,b, left-hand axis) and total charge density (c,d, right-hand axis) for Pt(111) in (0.1-x) M KClO4 + x M HClO4 solutions with (solid line) and without (dashed line) CO2 . A) pH 1.56 and B)pH 3.10. Scan rate 50 mV s-1.

Curves a and b in Figures 1A and B shows the voltammetric profiles of Pt(111) electrodes in contact with perchloric acid solutions of different pH in absence and presence of saturated CO2 gas. The rather flat current profile at E