Surfactants Facilitating Carbonic Anhydrase ... - ACS Publications

Jul 5, 2017 - ... Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China. ‡Illinois State G...
1 downloads 0 Views 622KB Size
Subscriber access provided by UNIVERSITY OF CONNECTICUT

Article

Surfactants Facilitating Carbonic Anhydrase EnzymeMediated CO2 Absorption into a Carbonate Solution Shihan Zhang, and Yongqi Lu Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.7b00711 • Publication Date (Web): 05 Jul 2017 Downloaded from http://pubs.acs.org on July 6, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 27

Environmental Science & Technology

1

Surfactants Facilitating Carbonic Anhydrase Enzyme-Mediated CO2

2

Absorption into a Carbonate Solution

3

Shihan Zhang†,‡ and Yongqi Lu*,‡ †

4

Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang

5

Province, College of Environment, Zhejiang University of Technology, Hangzhou, 310014,

6

China

7 8



Illinois State Geological Survey, Prairie Research Institute, University of Illinois at UrbanaChampaign, Champaign, Illinois, 61820, United States

9 10

ABSTRACT: Carbonic anhydrase (CA) enzyme-mediated absorption processes are regarded as

11

promising alternatives to the conventional amine-based process for CO2 capture because of their

12

low energy penalty and low risk of causing secondary pollution. The activity and stability of the

13

CA enzyme are crucial to reducing the equipment and operating costs of the enzyme-mediated

14

process. This work investigated three cationic and nonionic surfactants to improve the activity

15

and stability of a technical-grade CA enzyme in a 20 wt % potassium carbonate solution.

16

Experimental results revealed that the impact of the surfactants on the CA enzyme depended on

17

their properties. For example, the cationic surfactant significantly enhanced the activity of CA

18

enzyme but adversely affected enzyme stability. However, in the presence of the cationic

19

surfactant after 30 days at 50 °C, the activity of CA enzyme still outperformed that of CA

20

without added surfactant. The nonionic surfactant significantly improved enzyme stability.

21

Furthermore, the addition of surfactants within a critical micelle concentration of 1.0 did not

22

distinctly influence the gas–liquid mass transfer, indicating that surfactant–enzyme interaction

23

was responsible for the observed variations in the activity and stability of the tested enzyme. 1

ACS Paragon Plus Environment

Environmental Science & Technology

24

1. INTRODUCTION

25

Carbon dioxide (CO2) emissions are the driving force behind climate change. On November 4,

26

2016, the Paris Agreement, which was signed by nearly 200 countries, went into effect to curtail

27

CO2 emissions in a bid to keep the global average increase in temperature below 2 °C. The best

28

option for reducing CO2 emissions in the near term is postcombustion carbon capture process

29

(PCCP) because it requires a minimal retrofitting of existing facilities.1

30 31

Among the available PCCP, the monoethanolamine (MEA)-based process is costly because of its

32

high energy penalty.2-4 This energy penalty is mainly due to the steam used for solvent

33

regeneration and the required CO2 compression work, which accounts for 60% to 70% of the

34

total cost.5,6 Thus, it is crucial to develop new solvents and tailored absorption processes for CO2

35

capture.

36 37

The enzyme carbonic anhydrase (CA) is attractive as a biocatalyst for CO2 absorption because

38

solvent regeneration can be accomplished by using solvents that potentially incur a low energy

39

use but which are restricted from practical use because of their slow absorption kinetics in the

40

absence of a rate promoter.7–10 One CA enzyme-enabled technology is the Integrated Vacuum

41

Carbonate Absorption Process (IVCAP), which uses a potassium carbonate (PC, K2CO3)

42

aqueous solution promoted by CA as a solvent for CO2 capture.11,12 A thermodynamic analysis

43

of the IVCAP showed an energy saving of up to 30% compared with the conventional 5 M MEA

44

process for CO2 capture when integrated into a 528 MWe subcritical pulverized coal-fired power

45

plant.11 A kinetic analysis also established the technical feasibility of the IVCAP by showing that

2

ACS Paragon Plus Environment

Page 2 of 27

Page 3 of 27

Environmental Science & Technology

46

the effective packing volume of the absorber with a 20 wt % PC solution in the presence of 10 g

47

L−1 of CA was only slightly greater than that with the benchmark 5 M MEA.13

48 49

For processes in which CA enzyme is restricted to the CO2 absorption operation, the primary

50

concern related to the enzyme-enabled process is the activity and stability of CA at the typical

51

flue gas temperature (40–60 °C). The activity and stability of the enzyme determine not only the

52

footprint and thus the capital cost of the absorber, but also the operating cost associated with

53

enzyme degradation. In our previous work, CA enzymes were immobilized on various supports,

54

including nonporous nanoparticles and porous materials.14–16 The immobilized CA enzymes

55

exhibited improved thermal and chemical stability compared with their free counterparts.

56

However, the activity of all the immobilized enzymes was reduced by covalent bonding between

57

the enzyme and supports as well as significant intraparticle diffusion resistance to the porous

58

supports. Therefore, the desired tradeoff between the activity and stability of CA should be

59

determined if the immobilized enzyme is to be utilized for CO2 capture.

60 61

Recently, surfactant–enzyme interactions (e.g., hydrophobic and electrostatic interactions) have

62

gained increasing attention because they tend to improve both enzyme activity and stability.17–19

63

Literature data indicate that the activity and stability of an enzyme depend on the nature and

64

concentration of the surfactant. Primarily, a surfactant concentration higher than the critical

65

micelle concentration (CMC) is not beneficial for enzyme activity because the surfactant

66

molecules aggregate to form micelles with a typically hydrophilic exterior and a hydrophobic

67

interior.20,21 At concentrations below the CMC, the surfactant is present as a monomer and binds

68

to the amino acid groups of the enzyme, eventually resulting in a conformational change in the

3

ACS Paragon Plus Environment

Environmental Science & Technology

69

enzyme structure. Once the binding sites of the enzyme are saturated, adding more surfactant

70

results in the formation of clusters, leading to protein unfolding.20 The activity and stability of

71

enzymes (e.g., tyrosinase, lipases, and laccase) have been reported to improve in the presence of

72

the surfactant under CMC.21–24 Note that these researches have focused on homogeneous enzyme

73

solutions. Little information is available from the literature for immobilized enzyme-surfactant

74

interactions and any synergistic effect on the activity and stability of the immobilized enzyme.

75

Enzyme immobilization together with beneficial immobilized enzyme-surfactant interactions

76

could be another option to improve enzyme stability and activity although it is not a focus of this

77

study.

78 79

In this study, experiments were performed on CO2 absorption in a homogeneous CA–PC solvent

80

mixture, facilitated by adding one of three surfactants, either a cationic surfactant

81

(cetyltrimethylammonium bromide [CTAB] or dodecyltrimethylammonium bromide [DTAB])

82

or a nonionic surfactant (Tween-80), to evaluate the impact of the surfactant on CA enzyme

83

activity. The thermal stability of CA enzyme with an optimized dosage of surfactant was

84

investigated under typical IVCAP operating conditions over a 30-day period at 50 °C. Moreover,

85

the effect of the surfactant on the liquid-side mass transfer coefficient was examined

86

experimentally. The overall goal of this study was to improve the activity and stability of

87

homogeneous CA enzyme by adding a suitable surfactant, thus ameliorating the use of CA

88

enzyme for CO2 capture.

89 90

2. EXPERIMENTAL METHODOLOGY

91

2.1 Materials

4

ACS Paragon Plus Environment

Page 4 of 27

Page 5 of 27

Environmental Science & Technology

92

Potassium carbonate (≥99.0%), potassium bicarbonate (≥99.5%), CTAB (≥98.0%), DTAB

93

(≥99.0%), and Tween-80 (10%, wt/wt) were purchased from Sigma-Aldrich (St. Louis, MO).

94

Carbon dioxide gas (99.99% purity) was purchased from S.J. Smith (Urbana, IL). A

95

developmental technical-grade CA enzyme of microbial origin was provided by Novozymes A/S

96

(Bagsvaerd, Denmark). All materials were used as received without further purification. Table 1

97

shows the molecular structures and CMC levels of the CTAB, DTAB, and Tween-80.25-26 The

98

referenced CMC data was measured in water at room temperature. It has been reported that the

99

addition of a salt such as NaCl or NaBr induced a sphere-to-rod transition of cationic surfactant

100

micelles.27 Furthermore, depending upon its type and concentration, the presence of a counter ion

101

could reduce the electrostatic repulsion between the charged headgroups of the ionic surfactant,

102

resulting in a decrease in the CMC of the surfactant.28 Compared with the ionic surfactant, the

103

non-ionic surfactant without the charged headgroups possesses much less significant dependence

104

on the ionic strength. It should be noted that the surfactant concentration was presented as a

105

fraction of the CMC in this work for comparison purposes.

106 107

2.2 Experimental Methods

108

The liquid-side mass transfer coefficient of the CA–PC solvent mixture in the presence of

109

CTAB, DTAB, or Tween-80, kL, was determined by measuring the rate of CO2 absorption into

110

pure water with a pH below 3.0 in a stirred tank reactor (STR). This was done to minimize the

111

chemical reaction between CO2 and OH− in the STR, which was equipped with an overhead

112

mechanical stirrer (300 rpm) in the gas phase and a magnetic stirrer (450 rpm) in the liquid

113

phase. A detailed description of the STR setup is provided in a previous work.12 In a typical

114

experiment, the STR was charged with 800 mL of acidified pure water and degassed by a

5

ACS Paragon Plus Environment

Environmental Science & Technology

Page 6 of 27

115

vacuum pump to strip off residual air. Pure CO2 gas was then injected into the STR until the

116

required initial pressure was reached. The absorption process was operated at 50 °C and

117

measured by monitoring the pressure change in the STR over time. The absorbed CO2 primarily

118

exists in a physically dissolved molecular form in the liquid phase. An initial CO2 partial

119

pressure in the STR of up to approximately 68 kPa was used to achieve a more rapid absorption

120

rate and to minimize the gas-phase mass transfer resistance.

121 122

The activity of CA enzyme (50–300 mg L−1) in promoting the absorption of CO2 into a 20 wt %

123

PC solution with a 20% carbonate-to-bicarbonate conversion (PC20-20, pH 10.5) was measured

124

in the STR in the presence of CTAB, DTAB, or Tween-80 with concentrations varying from

125

0.05 to 1.0 CMC. This procedure was similar to the physical absorption of CO2 into pure water,

126

as described above. In a typical experiment, 800 mL of the desired solvent was used for the

127

absorption of pure CO2 gas under a pressure of 12 kPa at 50 °C. In the enzyme stability

128

experiment, the desired solvents were prepared by adding optimal doses of individual surfactants

129

to the PC20-20 solution with 100 mg L−1 of CA enzyme, and then storing the mixture in an

130

incubator at 50 °C for 30 days. The solvents were sampled at a certain time interval during the 30

131

days, and the activity of the CA enzyme was then determined for each sample.

132 133

2.3 Determination of the Liquid-Side Mass Transfer Coefficient (kL)

134

For gas absorption taking place in a STR, the following equations can be derived based on the

135

conservation principle, the ideal gas law, and Henry’s law:29

136

R=−

dPCO2 VG = kL E × ( C * − C b ) A × RgasT dt

(1)

6

ACS Paragon Plus Environment

Page 7 of 27

137

Environmental Science & Technology

and C* =

138

PCO2 He

,

(2)

139

where VG is the volume of the gas phase, m3; A is the interfacial area between the gas and liquid

140

phases, m2; Rgas is the gas constant, kPa m3 kmol−1 K−1; T is the temperature, K; PCO2 is the partial

141

pressure of CO2, kPa; t is the time, s; He is the Henry’s law coefficient, kPa m3 kmol−1; C* and

142

Cb are the physical solubility of CO2 under the pressure prevailing at the interface and the

143

concentration of CO2 in the bulk solution, respectively, kmol m−3; kL is the individual liquid-side

144

mass transfer coefficient, m s−1; and E is the enhancement factor, dimensionless.

145 146

For physical absorption, the absorbed CO2 primarily exists in a physically dissolved molecular

147

form and E is equal to 1. Therefore, the following equations can be obtained: R=−

148 149

dPCO2  PCO2  VG = kL ×  − Cb  A × RgasT dt  He 

(3)

and

C b ×VL =

150

(P

CO2 ,0

)

− PCO2 × VG RgasT

,

(4)

151

where VL is the volume of the liquid phase, m3, and PCO2 ,0 is the initial partial pressure of CO2,

152

kPa.

153

By arranging eq. (3) and eq. (4) and integrating them, we obtain

154

 C1 PCO 2 ,0 + C2 ln   C1 PCO + C2  2

  = − k L C 1 ∆t , 

(5)

7

ACS Paragon Plus Environment

Environmental Science & Technology

155

where

C1 = −

156

157

Page 8 of 27

V RT × A  1  + G VG  He V L RT

  

(6)

and C2 =

158

PCO2 ,0 × A VL

.

(7)

159

The values of kL can then be obtained from the slopes of the straight trend lines of

160

ln C1 PCO 2 ,0 + C 2 C1 PCO 2 + C2

161

pressure profiles.

(

)

versus −C 1 ∆t based on measurement of the changing CO2

162 163

2.4 Determination of the Overall Rate Constant (kov)

164

For chemical absorption with a pseudo first-order reaction, the enhancement factor can be

165

determined as30

166

 Dk E = 1 + 2ov kL 

 , 

(8)

167

where D is the diffusion coefficient of CO2 in the liquid phase, m2 s−1, and kov is the overall first-

168

order rate constant, s−1.

169 170

The absorption reaction can be considered pseudo first order with respect to dissolved CO2 when

171

the following criterion is satisfied:31

172

 1 2    Dk   C *  +   1 + 2ov  − 1