Synthesis and Characterization of [RuCl3(P-P)(H2O)] Complexes

Yuan-You Tang , Rui-Xiang Li , Xian-Jun Li , Ning-Bew Wong , Kim-Chung Tin , Zhe-Ying Zhang , Thomas C. W. Mak. Chinese Journal of Chemistry 2004 22, ...
0 downloads 0 Views 88KB Size
Inorg. Chem. 1999, 38, 5341-5345

5341

Synthesis and Characterization of [RuCl3(P-P)(H2O)] Complexes; P-P ) Achiral or Chiral, Chelating Ditertiary Phosphine Ligands Luis R. Dinelli,† Alzir A. Batista,*,† Karen Wohnrath,† Marcio P. de Araujo,† Salete L. Queiroz,‡ Marcos R. Bonfadini,‡ Glaucius Oliva,‡ Otaciro R. Nascimento,‡ Paul W. Cyr,§ Kenneth S. MacFarlane,§ and Brian R. James*,§ Departamento de Quı´mica, Universidade Federal de Sa˜o Carlos, CEP 13565-905, Sa˜o Carlos (SP), Brazil, Instituto de Fı´sica e Quı´mica, Universidade de Sa˜o Paulo, CEP 13560-970, Sa˜o Carlos (SP), Brazil, and Department of Chemistry, The University of British Columbia, Vancouver, BC, V6T 1Z1, Canada ReceiVed January 29, 1999 The reaction of the dinuclear [RuCl2(dppb)]2(µ-dppb) (dppb ) 1,4-bis(diphenylphosphino)butane) with Cl2 in MeOH for ∼30 min at room temperature gives the bright-red solid mer-RuCl3(dppb)(H2O) (1); Cl2 treatment for ∼10 min affords the red-brown, mixed valence complex [RuCl(dppb)]2(µ-Cl)3 (2). Controlled bulk coulometric reduction of 50% of the content of a CH2Cl2 solution of 1 also produces 2, formed by the reaction of 1 with “RuCl2(dppb)” produced in situ during the electrolysis. Complexes 1 and 2 were characterized by spectroscopic techniques [including electron spin resonance (ESR)], magnetic moments and cyclic voltammetry, and the structure of 1 was determined by X-ray diffraction. The structure shows that the aquo ligand forms hydrogen bonds with two cis-chlorine ligands of the neighboring molecule of the complex; this interaction gives rise to exchange coupling between two Ru(III) centers that is reflected in the ESR spectrum. A species 3 analogous to 1 has been obtained with the diop ligand [diop ) (2R,3R)- or (2S,3S)-O-isopropylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane], on using RuCl2(diop)(PPh3) or [RuCl(diop)]2(µ-Cl)3 as precursors. The RuCl3(P-P)L complexes (P-P ) dppb, diop; L ) dimethyl sulfoxide, MeOH) are readily synthesized from 1 or 3.

Introduction For Ru complexes containing chelating ditertiary phosphine ligands, the 1:1 “RuII(P-P)” moiety has been identified as the active component of catalysts within hydrogenation reactions, and this has motivated our ongoing interest in synthesizing Ru complexes that contain a single diphosphine ligand per metal center and examining their activities for the catalytic hydrogenation of unsaturated organics.1,2 In cases where the catalyst precursor contains two chelating diphosphines per Ru, the active species in solution has been shown to contain a Ru(P-P) moiety, and indeed the excess (P-P) ligand inhibits the catalysis.3 There are many examples of achiral and chiral “Ru(P-P)” catalyst systems. The [RuCl(dppb)]2(µ-Cl)2 complex catalyzes the hydrogenation of styrene,4 the transfer hydrogenation (from propan-2-ol) of acetophenone,5 and the H2-hydrogenation of imines.6 The first “Ru(P-P)” enantioselective catalyst system * To whom correspondence should be addressed. † Federal University of Sa ˜ o Carlos. ‡ University of Sa ˜ o Paulo. § University of British Columbia. (1) ) Queiroz, S. L.; Batista, A. A.; Oliva, G.; Gambardella, M. T. do P.; Santos, R. H. A.; MacFarlane, K. S.; Rettig, S. J.; James, B. R. Inorg. Chim. Acta 1998, 267, 209 and references therein. (2) MacFarlane, K. S.; Thorburn, I. S.; Cyr, P. W.; Chau, D. E. K.-Y.; Rettig, S. J.; James, B. R. Inorg. Chim. Acta 1998, 270, 130. (3) (a) James, B. R.; McMillan, R. S.; Morris, R. H.; Wang, D. K. W. AdV. Chem. Ser. 1978, 167, 127. (b) James, B. R.; Wang, D. K. W. Can. J. Chem. 1980, 58, 245. (4) Joshi, A. M.; MacFarlane, K. S.; James, B. R. J. Organomet. Chem. 1995, 488, 161. (5) Joshi, A. M.; James, B. R. J. Chem. Soc., Chem. Commun. 1989, 1785. (6) Fogg, D. E.; James, B. R.; Kilner, M. Inorg. Chim. Acta 1994, 222, 85.

reported was the hydrogenation of prochiral functionalized olefins such as (Z)-acetamidocinnamic acid to 97% enantiomeric excess using [RuCl(P-P)]2(µ-Cl)2 (P-P ) chiraphos, diop) species.7 Subsequently, many “Ru(P-P)”-containing complexes (but with more emphasis on P-P ) binap), such as Ru2Cl4(P-P)2(NEt3),2,8 Ru(OAc)2(binap),9 [RuCl(arene)(P-P)]+,10 [RuH(P-P)(solvent)3]+,11 Ru(P-P)(π-allyl)2,12 RuCl2(RCN)2(P-P),6,8e,13 [RuX(P-P)]2(µ-X)2 (X ) halogen),2,6,14,15 and [RuX(P-P)]2(µ(7) James, B. R.; Pacheco, A.; Rettig, S. J.; Thorburn, I. S. Ball, R. G.; Ibers, J. A. J. Mol. Catal. 1987, 41, 147. (8) For example: (a) Ikariya, T.; Ishii, Y.; Kawano, H.; Arai, T.; Saburi, M.; Yoshikawa, S.; Akutagawa, S. J. Chem. Soc., Chem. Commun. 1985, 922. (b) Kitamura, M.; Ohkuma, T.; Inoue, S.; Sayo, N.; Kumobayashi, S.; Akutagawa, S.; Ohta, T.; Takaya, H.; Noyori, R. J. Am. Chem. Soc. 1988, 110, 629. (c) Kawano, H.; Ikariya, T.; Ishii, Y.; Saburi, M.; Yoshikawa, S.; Uchida, Y.; Kumobayashi, H. J. Chem. Soc., Perkin Trans. I. 1989, 1571. (d) Taber, D. F.; Silverberg, L. J. Tetrahedron Lett. 1991, 32, 4227. (e) Shao, L.; Takeuchi, K.; Ikemoto, H.; Kawai, T.; Ogasawara, H.; Takeuchi, H.; Kawano, H.; Saburi, M. J. Organomet. Chem. 1992, 435, 133. (f) Ohta, T.; Tonomura, Y.; Nozaki, K.; Takaya, H.; Mashima, K. Organometallics 1996, 15, 1521. (9) (a) Noyori, R.; Ikeda, T.; Ohkuma, T.; Widhalm, M.; Kitamura, M.; Takaya, H.; Akutagawa, S.; Sayo, N.; Kumobayashi, H. J. Am. Chem. Soc. 1989, 111, 9134. (b) Ohta, T.; Takaya, H.; Noyori, R. Tetrahedron Lett. 1990, 31, 7189. (c) Ashby, M. T.; Halpern, J. J. Am. Chem. Soc. 1991, 113, 589. (10) (a) Mashima, K.; Kusano, K.; Ohta, T.; Noyori, R.; Takaya, H. J. Chem. Soc., Chem. Commun. 1989, 1208. (b) Fogg, D. E.; James, B. R. J. Organomet. Chem. 1993, 462, C21. (11) (a) Wiles, J. A.; Lee, C. E.; McDonald, R.; Bergens, S. H. Organometallics 1996, 15, 3782. (b) Wiles, J. A.; Bergens, S. H. Organometallics 1998, 17, 2228. (12) (a) Geˆnet, J. P.; Mallart, S.; Pinel, C.; Juge, S.; Laffite, J. A. Tetrahedron: Asymmetry 1991, 2, 43. (b) MacFarlane, K. S.; Rettig, S. J.; Liu, Z.; James, B. R. J. Organomet. Chem. 1998, 557, 213. (13) Fogg, D. E.; James, B. R. Inorg. Chem. 1997, 36, 1961.

10.1021/ic990130c CCC: $18.00 © 1999 American Chemical Society Published on Web 10/27/1999

5342 Inorganic Chemistry, Vol. 38, No. 23, 1999 X)3,2,14,16 have been used as catalysts, and these have been synthesized generally via RuII precursors having Ru(arene),10 Ru(diene),8c,17,18 or Ru(η3-allyl) moieties,12,15,19 or via RuCl2(PR3)32,6,14,16 or RuCl3(PR3)2(N,N-dimethylacetamide) (R ) Ph, p-tolyl).2,14,16 Such types of complexes are extremely effective precursors for catalytic asymmetric hydrogenation of functionalized prochiral olefins, dienes, and ketones,20,21 and certain prochiral imines.22 The synthesized “RuII(P-P)” species are typically air-sensitive in solution, and clearly it would be advantageous for application in organic syntheses to use more air-stable complexes as catalyst precursors. We have noted, for example, the preferred use of the air-stable, Ru(III)/Ru(II) mixed-valence complex [RuCl(P-P)]2(µ-Cl)3, which under H2 is reduced to the true RuII catalyst precursor [RuCl(P-P)]2(µCl)2.6 The number of reported, isolated “RuIII(P-P)” species is very limited,16 and outside of the mixed-valence type, we are unaware of any containing chiral, chelating diphosphines. In this paper, we report the synthesis of RuCl3(P-P)L complexes [L ) H2O, MeOH, dimethyl sulfoxide (DMSO), P-P ) dppb or diop], a new class of “RuIII(P-P)” species, and include the structure of RuCl3(dppb)(H2O) (1). A new route to the known, binuclear, mixed-valence [RuCl(dppb)]2 (µ-Cl)3 complex (2)14,16 from [RuCl2(dppb)]2(µ-dppb)14,23 is also described. Controlled potentiometric coulometry of 1 also produces 2. Experimental Section Materials and Instrumentation. Except for the oxidation using Cl2, manipulations were carried out under purified Ar using standard Schlenk techniques. Reagent grade solvents were appropriately distilled and dried before use. The dppb was used as received from Aldrich. RuCl3‚3H2O (∼40% Ru) was obtained on loan from Johnson Matthey Ltd. or Colonial Metals Inc., or purchased from Degussa S.A. (Sa˜o Paulo). [RuCl2(dppb)]2(µ-dppb) (written subsequently as Ru2Cl4(dppb)3),3a,23 [RuCl(P-P)]2(µ-Cl)314,16 (written subsequently as Ru2Cl5(P-P)2, where P-P ) dppb or diop), and RuCl2(diop)(PPh3)13,14 were prepared according to literature procedures. IR spectra (cm-1) were recorded as CsI pellets in the 4000-200 cm-1 region, on a Bomen-Michelson 102 instrument; UV-visible (UV-vis) and near-infrared (NIR) spectra were recorded in solution on Hewlett-Packard 8452A diode array or Cary 500 spectrophotometers, respectively, and are presented as λmax or shoulder (nm)/max (M-1cm-1). ESR spectra were measured at - 160 °C using a Varian E-109 instrument operating at the X band frequency, within a rectangular cavity (E-248) fitted with a temperature controller. Effective magnetic moments (µeff) were determined at room temperature (∼25° C) by the Gouy method, or by the Evans method using the paramagnetically (14) Joshi, A. M.; Thorburn, I. S.; Rettig, S. J.; James, B. R. Inorg. Chim. Acta 1992, 198-200, 283. (15) Geˆnet, J. P.; Oinel, C.; Rutovelomanana-Vidal, V.; Mallart, S.; Pfister, X.; Cano De Andradez, M. C.; Laffitte, J. A. Tetrahedron: Asymmetry 1994, 5, 665. (16) Thorburn, I. S.; Rettig, S. J.; James, B. R. Inorg. Chem. 1986, 25, 234. (17) Brown, J. M.; Brunner, H.; Leitner, W.; Rose, M. Tetrahedron: Asymmetry 1991, 2, 331. (18) Ohta, T.; Noyori, R.; Takaya, H. Inorg. Chem. 1988, 27, 566. (19) Alcock, N. W.; Brown, J. M.; Rose, M.; Wienand, A. Tetrahedron: Asymmetry 1991, 2, 47. (20) (a) Noyori, R.; Takaya, H. Acc. Chem. Res. 1990, 23, 345. (b) Takaya, H.; Ohta, T.; Noyori, R. In Catalytic Asymmetric Synthesis; Ojima, I., Ed.; VCH: Oxford, 1993; p 1. (c) Ager, D. J.; Laneman, S. A. Tetrahedron: Asymmetry 1997, 8, 3327. (21) Noyori, R. Chem. Soc. ReV. 1989, 18, 187; Science 1990, 248, 1194; ChemTech 1992, 360; Tetrahedron 1994, 50, 4259; Asymmetric Catalysis in Organic Synthesis; Wiley: New York, 1994; Acta Chem. Scand. 1996, 50, 380. (22) (a) Oppolzer, W.; Wills, M.; Starkenmann, C.; Bernardinelli, G. Tetrahedron Lett. 1990, 31, 4117. (b) James, B. R. Catal. Today 1997, 37, 209. (23) Bressan, M.; Rigo, P. Inorg. Chem. 1975, 14, 2286.

Dinelli et al. shifted 1H NMR signal of CHCl3.24 Cyclic voltammetry (CV) experiments were carried out at room temperature in CH2Cl2 containing 0.10 M Bu4N+ClO4- (TBAP) (Fluka Purum) using a BAS-100B/W Bioanalytical Systems Instrument; the working and auxiliary electrodes were stationary Pt foils, and the reference electrode was Ag/AgCl, 0.10 M TBAP in CH2Cl2, a medium in which ferrocene is oxidized at 0.43 V (Fc+/Fc). In the controlled potentiometric coulometry, a Pt mesh was used as working electrode and the auxiliary electrode was separated from the solution by a sintered glass disk. Elemental analyses were performed in the Chemistry Departments at either the University of Sa˜o Paulo or British Columbia. mer-RuCl3(dppb)(H2O) (1). All reactions with Cl2 were performed in air in a well-Ventilated fume hood. Cl2 was generated by dropwise addition of concentrated HCl (10 mL) to ∼6.0 g of magnetically stirred, solid KMnO4 in a three-necked flask equipped with a 50-mL addition funnel, a stopper, and a rubber septum; the generated Cl2 was vented through a Tygon tube equipped with a 1-mL syringe (with an 18G needle) at each end, one end being inserted through the septum. The syringe tip on the outlet end of the tubing was fitted to a short piece of plastic tubing which was inserted into the reaction mixture to prevent contamination by metal from the syringe. The bubbling rate was maintained by adding one drop of concentrated HCl and allowing the released Cl2 to bubble through the mixture before adding another drop of acid. Bubbling of Cl2 through a suspension of Ru2Cl4(dppb)3 (97 mg, 0.06 mmol) in MeOH (10 mL) for 30 min at room temperature generated a bright red precipitate, which was collected by filtration, washed with Et2O (3 × 10 mL), and dried under vacuum (72 mg; 92%). Anal. Calcd for C28H30OCl3P2Ru: C, 51.59; H, 4.64; Cl, 16.31. Found: C, 51.5; H, 4.7; Cl, 16.6. UV-vis (CH2Cl2): 534 (1650), 420 (1290), 352(1750). IR: νOH 3053 s, δOH 1620 s, νRu-Cl 340, 303, 263. ESR: see text. µeff 2.19 µB. Crystals suitable for X-ray analysis were grown by slow diffusion of Et2O into a CH2Cl2 solution of the complex. Complex 1 was also made by bubbling Cl2 through a suspension of Ru2Cl5(dppb)2 (2) (see below; 28 mg, 0.023 mmol) in MeOH (3 mL) for ∼10 min. Concentration of the red suspension in vacuo and filtration gave a bright red solid, which was washed with Et2O (5 × 1 mL) and dried under vacuum (15.5 mg; 52%). [RuCl(dppb)]2(µ-Cl)3 (2). Use of the procedure described above, but bubbling Cl2 for 10 min through a C6H6 or CH2Cl2 solution (10 mL) of the Ru2Cl4(dppb)3, gave a red-brown solution, which was then reduced in volume to ∼1 mL; addition of Et2O (10 mL) produced a red-brown product, which was filtered off, washed with hexanes, and vacuum-dried (66 mg; 90%). Anal. Calcd for C56H56Cl5P4Ru2: C, 54.57; H, 4.59; Cl, 14.38. Found: C, 54.5; H, 4.6; Cl, 14.6. UV-vis/NIR (CDCl3): 374 (9400), 436 (sh, 7300), 550 (sh, 4700), 980 (900), 2050 (1200). RuCl3(dppb)(DMSO). Complex 1 (100 mg, 0.153 mmol) and DMSO (25 µL, 0.352 mmol) were stirred in CH2Cl2 (25 mL) at room temperature for 4 h; the solution volume was reduced to ∼2 mL, when addition of Et2O (10 mL) precipitated a red solid, which was collected, washed well with Et2O, and dried under vacuum (88 mg, 79%). Anal. Calcd for C30H34OCl3P2SRu: C, 50.61; H, 4.81, S, 4.50. Found: C, 50.32; H, 4.92; S, 4.37. UV-vis (CH2Cl2): 532 (1670), 420 (1330), 356 (1750). IR: νSO 944 vs, νRu-Cl 336, 261. ESR: g1 2.974, g2 1.985, g3 1.518. µeff 2.08 µB. RuCl3(dppb)(MeOH). Complex 1 (100 mg, 0.153 mmol) was refluxed in 10 mL of CH2Cl2/MeOH (1:1) for 8 h. The solution volume was reduced to ∼2 mL, when addition of Et2O precipitated a dark red solid, which was collected, washed with ether, and dried under vacuum (72 mg; 71%). Anal. Calcd for C29H32OCl3P2Ru: C, 52.30; H, 4.84. Found: C, 52.4; H, 4.6. UV-Vis (CH2Cl2): 530 (1780), 420 (1470), 356 (1900). IR: δOH 1634, νRu-Cl 351, 266. ESR: g1 2.828, g2 2.106, g3 1.645. RuCl3(diop)(H2O) (3). Bubbling of Cl2 through a solution of RuCl2(diop)(PPh3) (273 mg, 0.29 mmol) in CH2Cl2 (30 mL) for ∼30 min at room temperature generated a red solution, which was then evaporated to dryness; the solid was then dissolved in Et2O (30 mL) and the solution filtered to remove a small amount of the mixed (24) (a) Evans, D. F. J. Chem. Soc. 1959, 2003. (b) Crawford, T. H.; Swanson, J. J. Chem. Educ. 1971, 48, 382.

Characterization of [RuCl3(P-P)(H2O)] Complexes Table 1. Crystallographic Data for mer-RuCl3(dppb)(H2O) (1)a formula fw space group a, Å b, Å c, Å V, Å3 Z Fcalc, g/cm3 T, °C µ (Mo KR), cm-1 F(000) no. of refined params R1 [I > 2σ(I)] wR2 a

C28H30OCl3P2Ru 651.88 orthorhombic, Pbca 14.932 (2) 18.133 (3) 20.594 (2) 5576.0(1) 8 1.553 25 9.850 2648 316 0.046 0.094

R1 ) Σ||Fo| -|Fc||/Σ|Fo|, wR2 ) [Σw(Fo2 - Fc2)2/Σw(Fo2)2]1/2.

phosphine precursor. The red solution was concentrated to ∼1 mL and hexanes (20 mL) were added to precipitate the product, which was collected, and dried under vacuum (53 mg; 25%). Anal. Calcd for C31H34O3Cl3P2Ru: C, 51.43; H, 4.73. Found: C, 51.17; H, 4.76. UVvis (CH2Cl2): 534 (1720), 428 (1480), 356 (1800). IR: νOH 3058 s, δOH 1596 s, νRu-Cl 313, 274. ESR: g1 2.782, g2 2.137, g3 1.721. µeff 2.21 µB. Complex 3 was also made by bubbling Cl2 through a solution of Ru2Cl5(diop)2 (25.5 mg, 0.018 mmol) in CH2Cl2 (10 mL) for 10 min. Concentration of the red solution in vacuo to ∼2 mL, followed by addition of hexanes (10 mL) precipitated a dark red solid, which was filtered off, washed with hexanes (3 × 3 mL) and dried under vacuum (13.3 mg; 50%). RuCl3(diop)(DMSO). Complex 3 (22.3 mg, 0.031 mmol) and DMSO (5 µL, 0.070 mmol) were stirred in CH2Cl2 (10 mL) at room temperature for 6 h, when the solution changed from dark red to pink. The volume was reduced to ∼1 mL and hexanes (20 mL) were added to precipitate a solid, which was filtered off, washed with hexanes (3 × 3 mL), and dried in vacuo (13 mg, 58%). Anal. Calcd for C33H38O3Cl3P2SRu requires: C, 50.55; H, 4.88. Found: C 50.21; H, 4.99. UV-vis (CH2Cl2): 530 (1680), 424 (1390), 358 (1750). IR: νSO 948 vs, νRu-Cl 325, 260. ESR: g1 2.982, g2 2.031, g3 1.584. X-ray Crystallographic Analysis of 1. Selected crystallographic data appear in Table l together with some experimental details. A single crystal of approximate dimensions 0.12 × 0.30 × 0.60 mm was used for data collection and unit cell determination on an Enraf-Nonius CAD-4 diffractometer at room temperature with graphite monochromatized Mo KR radiation (λ ) 0.710 73 Å). Unit-cell parameters were obtained from a least-squares refinement of the setting angles of 25 reflections in the range θ ) 10.2-18.9°. Intensity data were collected in the ω-2θ scan mode up to θmax ) 24.97°, with a scan rate range 6.7-20° min-1. The data were corrected for Lorentz and polarization, and the absorption effects were corrected empirically by a standard procedure.25 The structure was solved by Patterson methods and difference Fourier techniques. Scattering factors for non-H atoms were taken from Cromer and Mann,26a with corrections for anomalous dispersion from Cromer and Liberman26b and for H atoms from Stewart et al.27 All calculations were performed with the program SHELX97.28 All non-H atoms of the structure were refined with anisotropic thermal parameters. The aromatic and methylene H atoms were set isotropic with a thermal parameter 20% greater than the equivalent isotropic displacement parameter of the associated C atom. All H atoms were stereochemically positioned and refined with the riding model.28 The aromatic and CH2 bond lengths were set equal to 0.93 and 0.97 Å, respectively, and the aromatic rings were treated as rigid groups. Selected bond lengths, and bond angles appear in Table 2. A complete (25) Walker, N.; Stuart, D. Acta Crystallogr., Sect. A 1983, 39, 158. (26) (a) Cromer, D. T.; Mann, J. B. Acta Crystallogr., Sect. A: Fundam. Crystallogr. 1968, 24, 321. (b) Cromer, D. T.; Liberman, D. J. Chem. Phys. 1970, 53, 1891. (27) Stewart, R. F.; Davidson, E. R.; Simpson, W. T. J. Chem. Phys. 1965, 42, 3175. (28) Sheldrick, G. M. SHELX-97. Programs for Crystal Analysis (Release 97-2). University of Go¨ttingen, Germany, 1997.

Inorganic Chemistry, Vol. 38, No. 23, 1999 5343 Table 2. Selected Bond Lengths (Å) and Angles (deg)a Ru-P(1) Ru-P(2) Ru-Cl(1) O(W)‚‚‚H(O1) O(W)‚‚‚H(O2)

2.286(2) 2.384(2) 2.402(2) 1.037(5) 0.953(5)

Ru-Cl(2) Ru-Cl(3) Ru-O(W) Cl(3)‚‚‚H(O1) Cl(3)‚‚‚O(W)

2.304(2) 2.348(2) 2.216(5) 2.484(2) 3.346(3)

P-C 1.830(8)-1.843(8) P(1)-Ru-P(2) P(1)-Ru-Cl(1) P(1)-Ru-Cl(2) P(1)-Ru-Cl(3) P(1)-Ru-O(W) P(2)-Ru-Cl(1) P(2)-Ru-Cl(2) P(2)-Ru-Cl(3) P(2)-Ru-O(W) Cl(1)-Ru-Cl(2) Cl(1)-Ru-Cl(3)

93.53(7) 92.09(7) 95.66(8) 96.43(7) 174.4(2) 174.37(7) 89.14(7) 86.31(7) 91.8(2) 90.55(8) 92.83(7)

Cl(1)-Ru-O(W) Cl(2)-Ru-Cl(3) Cl(2)-Ru-O(W) Cl(3)-Ru-O(W) P(1)-C(1)-C(2) C(1)-C(2)-C(3) C(2)-C(3)-C(4) P(2)-C(4)-C(3) P(1)-C(111)-C(112) P(1)-C(111)-C(116) H(O1)-O(W)-H(O2) O(W)-H(O1)-Cl(3)

82.6(2) 167.32(8) 82.8(2) 85.4(1) 115.9(5) 114.4(7) 116.5(7) 117.3(6) 116.6(6) 124.8(6) 100.0(4) 140.0(3)

C-P-C 102.1(3)-103.0(3) a

Estimated standard deviations are given in parentheses.

table of atomic coordinates and equivalent isotropic thermal parameters, crystallographic data, hydrogen atom parameters, anisotropic thermal parameters, bond lengths, and bond angles are included as Supporting Information.

Results and Discussion The Ru(III) aquo, chelating diphosphine complexes of the type RuCl3(P-P)(H2O), where P-P ) dppb (1) or diop (3), are readily synthesized by Cl2-oxidation of the Ru(II) precursors Ru2Cl4(P-P)3 or RuCl2(P-P)(PPh3), or the Ru(II)Ru(III) dinuclear species Ru2Cl5(P-P)2; the source of the water for the aquo ligand could be the solvent or the Cl2 supply. That the syntheses from Ru2Cl4(P-P)3 proceed via Ru2Cl5(P-P)2 is apparent via visible monitoring of the reaction because the mixed valence species are red-brown, whereas 1 and 3 are bright red; also, during the synthesis of 3 from RuCl2(diop)(PPh3), in situ monitoring in the NIR region revealed the charge-transfer bands at 950 and 2050 cm-1, characteristic of Ru2Cl5(diop)2.16 Finally, if the Cl2oxidation procedure is carried out for a shorter time scale, the Ru2Cl5(dppb)2 complex (2) can be isolated in high yield on using Ru2Cl4(dppb)3 as reactant. X-ray analysis of RuCl3(dppb)(H2O) (1) reveals a distorted octahedral structure with a mer-configuration of the Cl atoms with the aquo ligand necessarily trans to a P atom (Figure 1). Of interest, the aquo ligand forms H-bonds with two cis-chlorine ligands of the neighboring molecule of the complex, which is related by an inversion center. The water H atoms were identified from difference maps and were refined isotropically; the O-H(O1) and O-H(O2) distances are 1.037(5) and 0.953(5) Å, respectively, whereas the H(O1)‚‚‚Cl(3) hydrogen-bonding distance is 2.484(2) Å. The distance of the O atom of one molecule to the Cl(3) from the centrosymmetrically related molecule is 3.346(3) Å, and the corresponding O-H(O1)‚‚‚ Cl(3) angle is 140.0(3)°. The H(O1)-O-H(O2) angle is 100.0(4)°. There is also a much weaker H-bonding interaction between H(O2) and Cl(1) with a separation of 3.217 Å. The Ru-Cl distances (2.304-2.402 Å) appear in the normal, wellestablished range for Ru(III) complexes29-31; the longest one is reasonably the bond trans to the P atom, whereas the RuCl(3) of length 2.348(2) Å is possibly weakened compared with Ru-Cl(2), 2.304(2) Å, because of the H-bonding interaction with Cl(3). The Ru-P(1) and Ru-P(2) bonds, 2.286(2) Å and 2.384(2) Å, are trans to water and Cl, respectively, and are

5344 Inorganic Chemistry, Vol. 38, No. 23, 1999

Dinelli et al.

Figure 2. ESR spectra (X-band frequency) of RuCl3(dppb)L complexes (L ) H2O, DMSO, MeOH) at -160 °C in the solid state. Figure 1. X-ray structure of mer- RuCl3(dppb)(H2O) (1), showing 50% probability thermal ellipsoids for the nonhydrogen atoms.

comparable to the Ru-P bond length in mer-RuCl3(PPh3)(1methylimidazole)2, 2.326(2) Å, where the PPh3 is trans to the methylimidazole.30 As expected, for a relatively hard Ru(III) center, the Ru-OH2 distance [2.216(5) Å] is shorter than the Ru-P distances, and being trans to a P-donor, the bond is longer than that of 2.101(4) Å found in RuCl3(dmtp)2(H2O), where dmtp is a N-donor pyrimidine derivative, and the aquo ligand is trans to a Cl atom.31 The magnetic moments of 1 and 3 (2.19 and 2.21 µB, respectively), although somewhat high for low-spin d5 (S ) 1/2) systems, are not unusual for Ru(III) complexes.32 Within these aquo complexes, the IR spectra show a sharp δOH band of coordinated water in the 1600 cm-1 region.33 Three bands seen in the 340-260 cm-1 range for 1 with mer-geometry could be associated with νRu-Cl stretches. For 3, two stronger bands in this range are evident, but there are also several weaker bands that might be due to νRu-Cl; whether 3 is mer or fac is not known unambiguously, but similarities in UV-vis spectra of 1 and 3 imply a mer-configuration. The far-IR data for these particular complexes [or RuCl3(P-P)L, where L is another coordinating solvent, see below] do not readily distinguish between the merand fac-geometries. The aquo ligand in 1 and 3 is readily displaced by other solvent ligands (L) such as DMSO, MeOH, and MeCN. Complexes with DMSO and MeOH have been isolated; they show correct elemental analyses for the formulation RuCl3(PP)L, and they have been partially characterized by spectroscopic and sometimes µeff data. Similarities in UV-vis data to those of 1 again suggest mer-geometries. The νSO values for the dppb/ DMSO and diop/DMSO complexes (944 and 948 cm-1) suggest (29) (a) Che, C. M.; Kwong, S. S.; Poon, C. K.; Lai, T. F.; Mak, T. C. W. Inorg. Chem. 1985, 24, 1359. (b) Hambley, T. W.; Lay, P. A. Inorg. Chem. 1986, 25, 4553. (c) Keppler, B. K.; Wehe, D.; Endres, R. Inorg. Chem. 1987, 28, 844. (d) Sheldrick, W. S.; Exner, R. Inorg. Chim. Acta 1992, 195, 1. (e) Rack, J. J.; Gray, H. B. Inorg. Chem. 1999, 38, 2. (30) Batista, A. A.; Polato, E. A.; Queiroz, S. L.; Nascimento, O. R.; James, B. R.; Rettig, S. J. Inorg. Chim. Acta 1995, 230, 111. (31) Velders, A. H.; Pazderski, L.; Ugozzoli, F.; Biagini-Cingi, M.; ManottiLanfredi, A. M.; Haasnoot, J. G.; Reedijk, J. Inorg. Chim. Acta 1998, 273, 259. (32) (a) Cotton, F. A.; Torralba, R. C. Inorg. Chem. 1991, 30, 4392. (b) Taqui Khan, M. M.; Reddy, K. V. J. Coord. Chem. 1982, 12, 71. (33) Nakamoto, K. Infrared and Raman Spectra of Inorganic and Coordination Compounds, 3rd ed.; Wiley: New York, 1978; p 226.

O-bonded sulfoxide.34 Dissolution of 1 or 3 in MeCN gives UV-vis changes consistent with replacement of the aquo ligand by MeCN (see below). Complexes 1 and 3, and the RuCl3(P-P)L species, in CH2Cl2 all show very similar UV-vis spectra having three bands in the 350-540 nm region with the middle band of somewhat lower intensity (see Figure S1). The spectra correspond closely to those reported earlier by one of our groups for dissolution of the dinuclear complex [RuCl3(dppb)]2 in DMSO or MeCN,16 consistent with formation of the corresponding RuCl3(dppb)L species. The new Ru(III) chemistry described here also partly clarifies the nature of the earlier suggested disproportionation of Ru2Cl5(dppb)2 in coordinating solvents into “RuCl3(dppb)” and “RuCl2(dppb)”.16 The solid-state ESR spectrum measured for RuCl3(dppb)(H2O) (1) is markedly different from those determined for the corresponding DMSO and MeOH complexes (Figure 2). Those of the last two, with three g values in the 2.9, 2.0, and 1.5 regions, are typical of Ru(III) species with rhombic distortions,30 whereas the spectrum of 1 shows a signal close to zero magnetic field, which is characteristic of complexes with coupling between paramagnetic species.35 Presumably, such an interaction in 1 occurs via a pathway involving the intermolecular Hbonding of the coordinated water molecule with the Cl atoms of the neighboring molecule of the complex, as noted in the discussion of the crystal structure. The observed ESR spectrum is consistent with a spin-spin interaction giving a zero-field splitting energy (J value) of 0.309 cm-1. A conceptually similar exchange coupling between two Cu(II)-containing molecules via a very weak H-bond between a coordinated Cl atom and the NH proton of a pyrazole ligand (where Cl‚‚‚H ) 3.72 Å, compared with H‚‚‚Cl ) 2.48 Å within 1) realized a J value about 100 times smaller.35 The ESR of a frozen CH2Cl2 solution of 1 (at -160 °C) shows the more typical three g value spectrum (g ) 2.81, 2.11, and 1.71), implying the absence of coupling evident in the solid state. The ESR spectrum for 3, the aquo/ diop complex, is that of a typical Ru(III) species, implying the absence of strong H-bonding interactions in the solid-state structure; the ESR spectrum of a frozen MeCN solution of (34) (a) Rochon, F. D.; Kong, P., Girad, L. Can. J. Chem. 1986, 64, 1897. (b) James, B. R.; Morris, R. H. Can. J. Chem. 1980, 58, 399. (35) (a) Goslar, J.; Hilczer, W.; Hoffmann, S. K. Phys. Status Solidi b 1993, 175, 465. (b) Hoffmann, S. K.; Goslar, J.; Hilczer, W.; Krupski, M. Inorg. Chem. 1993, 32, 3554.

Characterization of [RuCl3(P-P)(H2O)] Complexes

Inorganic Chemistry, Vol. 38, No. 23, 1999 5345

Figure 3. Cyclic voltammograms of RuCl3(dppb)(H2O) (1) (2), and Ru2Cl5(dppb)2 (2) (- - -); 0.001 M in CH2Cl2 with 0.10 M TBPA; scan rate 100 mV/s.

RuCl3(diop)(MeCN) formed in situ from 3 was essentially identical with that of 3. Cursory examination of the 1H NMR spectra of several of the isolated RuCl3(P-P)L complexes revealed relatively weak, paramagnetically upfield-shifted, broad signals that could be attributed generally to the phenyl or alkyl protons, but the NMR studies were not pursued, although such data on such low-spin d5 Ru species have been reported.31,36 Cyclic voltammetric measurements on [RuCl3(dppb)(H2O)] (1) (Figure 3) show the intermediacy of Ru2Cl5(dppb)2 (2) in the overall reduction to “RuCl2(dppb)”, which exists as the known dimer [RuCl(dppb)]2(µ-Cl)2.2,14 The CV data are readily rationalized in terms of eqs 1-3:

RuCl3(dppb)(H2O) (1) + 1 e- f “RuCl2(dppb)” + Cl - + H2O (1) RuCl3(dppb)(H2O) + “RuCl2(dppb)” f Ru2Cl5(dppb)2 (2) + H2O (2) Ru2Cl5(dppb)2 (2) + 1 e- f Ru2Cl4(dppb)2 + Cl-

(3)

The CV reveals an irreversible Ru(III)/Ru(II) process with Epc 0.14 V (point a), which is attributed to eq 1; this peak is absent in subsequent cycles because the electrochemistry is followed by the formation of 2 according to eq 2. The process at 0.06 V (point b) is due to reduction of the Ru(III) center of 2, as confirmed by CV on a chemically synthesized sample of (36) Baird, I. R.; Rettig, S. J.; James, B. R.; Skov, K. A. Can. J. Chem. 1998, 76, 1379.

2 (Figure 3). Controlled bulk coulometry to 50% reduction of 1 readily allows for isolation of 2; this was accomplished by evaporating the product solution to dryness, dissolving the redbrown residue in CH2Cl2, filtering off the TBAP, and adding Et2O to precipitate the mixed-valence complex. The air-sensitive Ru2Cl4(dppb)2 complex has been made previously by H2reduction of 2,2,14 and presumably could be made electrochemically (eq 3). The CV behavior of RuCl3(diop)(H2O) (3) is very similar to that of 1; peaks corresponding to those of a-d are seen at 0.20, 0.14, 0.66, and 0.82 V, respectively, the consistently higher values revealing slight, relative stabilization of the Ru(II) state in the diop vs corresponding dppb species. The two peaks at E1/2 0.52 and 0.73 V (points c and d, respectively) are attributed to Ru(III)/Ru(II) Ru(III)/Ru(III) couples, one implication being that, in this solution, 2 could exist as two isomers. Earlier, UV-vis and NIR data from one of our groups16 had been interpreted in terms of the existence of two isomers within complexes such as 2, such a conclusion being based partly on the presence of two charge-transfer bands in the NIR region solution spectra; for example, 2 in CDCl3 shows bands at 970 and 2050 nm of comparable intensity ( ) 890 and 1180, respectively). Heath’s group more recently has shown that the single isomer, mixed valence, cationic, triply choro-bridged complexes [Ru2Cl3L6]2+ (where L is a terminal, monodentate, tertiary phosphine) exhibit two bands in this region of the spectrum but, in contrast to 2, the higher energy band has much stronger intensity.37 The closeness of the two E1/2 values argues for the existence of isomers within the solution of 2. These potentials are about 1.0 V below the corresponding one of the dicationic species,38 which seems reasonable considering the 2+ difference in charges on the complexes; comparison of each Ru environment in the two types of complexes shows that 2 has a terminal Cl atom versus a terminal PR3 ligand in the dications, a factor that again will relatively stabilize Ru(III) and lead to a lower potential.38 Both types of complexes are of the delocalized classification.16,37 An alternative explanation for the presence of the c and d peaks (suggested by one of the reviewers) is that the second isomer is generated via a redox-initated process after generation of the species giving rise to peak c; further CV studies on these dinuclear Ru species are needed to unravel these details. Acknowledgment. We thank CNPq, CAPES, FINEP, and FAPESP in Brasil, and NSERC of Canada, for financial support, and Johnson Matthey Ltd. and Colonial Metals Inc. for loans of ruthenium. Supporting Information Available: Complete tables of crystallographic data, final atomic coordinates and equivalent isotropic parameters, hydrogen atom parameters, anisotropic thermal parameters, bond lengths and bond angles for 1. This material is available free of charge via the Internet at http://pubs.acs.org. IC990130C (37) Yeomans, B. D.; Humphrey, D. G.; Heath, G. A. J. Chem. Soc., Dalton Trans. 1997, 4153. (38) Heath, G. A.; Lindsay, A J.; Stephenson, T. A.; Vattis, D. K. J. Organomet. Chem. 1982, 233, 353.