Synthesis of Nanometer-Sized Cylinder-Like Structures from a 1,3,5

Nov 14, 2014 - Transmetalation of [2](PF6)3 with 3 equiv of [AuCl(SMe2)] or CuI yields the trinuclear AuI hexacarbene complex [3](PF6)3 or the trinucl...
2 downloads 6 Views 918KB Size
Article pubs.acs.org/Organometallics

Synthesis of Nanometer-Sized Cylinder-Like Structures from a 1,3,5Triphenylbenzene-Bridged Tris-NHC Ligand and AgI, AuI, and CuI Narayan Sinha,† Florian Roelfes,† Alexander Hepp,† Carmen Mejuto,‡ Eduardo Peris,*,‡ and F. Ekkehardt Hahn*,† †

Institut für Anorganische und Analytische Chemie and NRW Graduate School of Chemistry, Westfälische Wilhelms-Universität Münster, Corrensstraße 30, D-48149 Münster, Germany ‡ Departamento de Quı ́mica Inorgánica y Orgánica, Universitat Jaume I, Avda. Sos Baynat s/n, 12071 Castellón, Spain S Supporting Information *

ABSTRACT: The metal-controlled self-assembly of nanometer-sized trinuclear cylinder-like assemblies is described. The 1,3,5-triphenylbenzene-derived trisimidazolium salt [1](PF6)3 reacts with 1.5 equiv of Ag2O to yield the trinuclear AgI hexacarbene complex [2](PF6)3, where three AgI ions are sandwiched in between two C3-symmetric tris-NHC ligands. Transmetalation of [2](PF6)3 with 3 equiv of [AuCl(SMe2)] or CuI yields the trinuclear AuI hexacarbene complex [3](PF6)3 or the trinuclear CuI hexacarbene complex [4](PF6)3, respectively, with retention of the metallosupramolecular structure. The 1,3,5-triphenylbenzene ligand in the gold complex adopts a nonplanar geometry to allow π interactions between the central phenyl rings.



complexes have been described.16 Molecular assemblies derived from NHC-substituted phenylenes such as A and B feature a rather small cavity for the incorporation of molecular guests. We have therefore investigated tricarbene ligands having a larger π-conjugated backbone. Werner-type tridentate ligands with such an enlarged backbone featuring a central triazine17a,b or phenylene17c linker have been described. Related tris-NHC ligands are rare although some C3-symmetric ligands with different backbone groups been described.18 Here we describe the preparation of nanometersized cyclinder-like assemblies from the 1,3,5-triphenylbenzenebridged trisimidazolium salt [1](PF6)3 (Scheme 1)19 and AgI and the subsequent transmetalation of the tricarbene ligand to AuI and CuI.

INTRODUCTION The metal-directed self-assembly of supramolecular architectures has become a field of intense research, starting with the early work by Lehn on the dinuclear helicate complex prepared from CuI and 2,2′-bipyridine.1 Thereafter, the self-assembly of a large number of metallosupramolecular structures, with various shapes and sizes, has been independently reported by Fujita,2 Raymond,3 Stang,4 Nitschke,5 and others.6,7 Selected metallosupramolecular structures can function as molecular hosts by encapsulating small guest molecules.3a,8 The stabilization of reactive intermediates and selected catalytic transformations have also been observed within the cavities of metallosupramolecular assemblies.9,10 Most of the known metallosupramolecular hosts are built from Werner-type coordination compounds with metal centers coordinated by nitrogen and/or oxygen donor atoms of polydentate ligands. With the recent resurgence of interest in N-heterocyclic carbenes (NHCs)11 discrete metallosupramolecular structures held together by M−C bonds between metal centers and poly-NHC ligands have recently emerged. Today, molecular squares and rectangles,12 cylinders,13 and organometallic polymers14 built from polycarbene ligands are known. The silver(I)-mediated self-assembly of supramolecular assemblies from poly-NHC ligands has developed into an emerging field of organometallic chemistry due to the facile synthesis of silver-NHC complexes via the Ag2O method15 and the possibility to transmetalate the NHC ligands from silver to other transition metals.13e,f,15 This method was also used for the preparation of the cylinder-like assemblies A and B (Figure 1),13e,f and even the analogous M6 dodecacarbene © 2014 American Chemical Society



RESULTS AND DISCUSSION The trisimidazolium carbene precursor [1](PF6)3 was synthesized by a three-step procedure starting from 1,3,5-tris(4-bromophenyl)benzene (Scheme 1). Treatment of 1,3,5-tris(4-bromophenyl)benzene with imidazole in the presence of CuSO4·5H2O and K2CO3 in the solid state at 160 °C for 24 h resulted in the formation of the known19 compound I in 68% yield as a colorless solid. The trisimidazolium salt [1](Br)3 was obtained as an off-white solid in 66% yield upon heating of compound I with an excess of ethyl bromide at 100 °C for 48 h in DMF. Addition of NH4PF6 to a methanolic solution of [1](Br)3 gave the trisimidazolium hexafluorophosphate salt [1](PF6)3 in an Received: September 23, 2014 Published: November 14, 2014 6898

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

Figure 1. Cylinder-like assemblies from benzene-derived tris- or tetra-NHC ligands.

Scheme 1. Synthesis of the Ligand Precursor [1](PF6)3

of complex [2](PF6)3 was confirmed by 1H and 13C{1H} NMR spectroscopy and by HR-ESI mass spectrometry. Upon formation of [2](PF6)3, the characteristic resonance for the C2−H proton of azolium salt [1](PF6)3 at δ 9.88 ppm (in DMSO-d6) is no longer observed in the 1H NMR spectrum. The 13 C{1H} spectrum shows the CNHC resonance of [2](PF6)3 at δ 178.3 ppm (in DMSO-d6), which is consistent with the values previously reported for AgI−NHC complexes.13e,f,h,16 The HR-ESI mass spectrum (positive ions) of [2](PF6)3 featured the most intense peak at m/z 500.4380 (calcd for [2]3+ m/z 500.4390). Since AgI−NHC complexes are good carbene transfer agents,15 we tried to substitute the AgI ions in [2](PF6)3 for AuI ions. Stirring of a mixture of [2](PF6)3 and 3 equiv of [AuCl(SMe2)] in acetonitrile for 16 h at ambient temperature led to the formation of the trinuclear gold(I) hexacarbene complex [3](PF6)3 as an air- and moisture-stable white solid in

excellent yield of 79% as a colorless solid. The formation of [1](PF6)3 was confirmed by NMR spectroscopy (1H, 13C{1H}, 2D NMR) and by high-resolution electrospray ionization (HR-ESI) mass spectrometry. The imidazolium C2−H resonance was observed as a singlet at δ 9.88 ppm, a value consistent with chemical shifts reported for related trisimidazolium hexafluorophosphate salts.13e,f The 13C{1H} NMR spectrum shows the resonance for the C2 carbon atom at δ 140.8 ppm.13e,f The HR-ESI mass spectrum (positive ions) of [1](PF6)3 exhibits the most intense peak at m/z 197.1073 (calcd for [1]3+ m/z 197.1079). The procedure described here for the synthesis of [1](PF6)3 differs slightly from that used for the synthesis of [1](BF4)3, which was described by some of us previously.19 The reaction of 2 equiv of salt [1](PF6)3 with 3 equiv of Ag2O in acetonitrile under exclusion of light yielded the trinuclear AgI hexacarbene complex [2](PF6)3 in 77% yield as a colorless solid (Scheme 2; see also the Supporting Information). The formation 6899

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

Scheme 2. Synthesis of Complex [2](PF6)3 and Transmetalation of the Tris-NHC Ligand To Give [3](PF6)3 and [4](PF6)3

an excellent yield of 70%. The metallosupramolecular remained intact (Scheme 2). The formation of complex [3](PF6)3 was confirmed by 1H and 13 C{1H} NMR spectroscopy and by HR-ESI mass spectrometry. In the 13C{1H} NMR spectrum, the resonance for the CNHC carbon atoms was observed at δ 180.6 ppm (in DMSO-d6), in the range observed for previously reported [AuI(NHC)2] complexes.13e,f,h,16 The complete substitution of all three AgI ions by AuI ions is also evident from the observation of only one CNHC resonance in the 13C{1H} spectrum. The HR-ESI mass spectrum (positive ions) confirmed the formation of [3](PF6)3 by exhibiting an intense peak at m/z 589.1665 (calcd for [3]3+ m/z 589.1666). Single crystals of [3](PF6)3·CH3CN·5Et2O for an X-ray diffraction study were obtained by slow vapor diffusion of diethyl ether into a saturated acetonitrile solution of [3](PF6)3 at ambient temperature. The structure analysis revealed the expected molecular structure of the trinuclear gold(I) hexacarbene complex cation [3]3+, which is shown in Figure 2. The metric parameters observed in the cation [3] 3+ (Au−C NHC , 1.918(14)−2.096(14) Å; C NHC −Au−C NHC , 170.5(7)−178.6(5)°) fall in the ranges previously reported for dicarbene gold complexes.13e,f,h The three gold atoms form a triangle featuring Au···Au separations of about 1.4 nm. The two central phenyl rings of the tris-NHC ligands are oriented in a nearly coplanar fashion featuring a centroid···centroid separation of about 3.644 Å. We take this short separation as an indication for the presence of π···π interactions between these rings. By assuming that cation [3]3+ possesses a pseudo-triangular-prismatic

Figure 2. Molecular structure (top view) of the trication [3]3+ in [3](PF6)3·CH3CN·5Et2O (hydrogen atoms omitted for clarity, 50% probability ellipsoids). Selected bond distances (Å) and bond angles (deg): range Au−CNHC, 1.918(14)−2.096(14); range CNHC−Au− CNHC, 170.5(7)−178.6(5); range N−CNHC−N, 101.5(10)−105.1(12).

structure, we estimated the internal volume of the cavity to be 360 Å3, which is significantly larger than the internal volume estimated for the previously reported tri-AuI structures 6900

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

be seen if addition of suitable aromatic guest molecules leads to encapsulation and a breakup of the observed π···π interactions. The development of methods for efficient control of the shape and volume of cavities is of crucial interest for the design of metalosupramolecular structures that can function as molecular hosts for molecular recognition and selective catalysis. Further studies will be directed toward the utilization of the flexibility observed in [3]3+ for the encapsulation of aromatic guests inside the cavity of these synthetic organometallic receptors.

(the internal volume of the cavity of the tri-Au complex with structure A is estimated as 72 Å3). In addition, trinuclear cylinder-like assemblies related to [3]3+ obtained from tris-NHC ligands but featuring only a phenylene linker (see A in Figure 1) exhibit a much larger separation of the midpoints of the central phenylene groups (M = Ag, 4.914 Å; M = Au, 4.762 Å; M = Cu, 4.239 Å) in comparison to that of [3]3+ (3.644 Å).13e To accommodate the CNHC−Au−CNHC bonds of about 4.0 Å, the carbene donors in [3]3+ are pushed out of the plane of the central phenyl group toward the outside of the cylinder, giving the tricarbene a convex geometry (Figure 3).



EXPERIMENTAL SECTION

General Procedures. All manipulations were carried out under an argon atmosphere using standard Schlenk techniques. Glassware was oven-dried at 130 °C. Solvents were distilled by standard procedures prior to use. 1H and 13C{1H} NMR spectra were recorded at 298 K on Bruker AVANCE I 400, Bruker AVANCE III 400, and Bruker AVANCE II 200 spectrometers. Chemical shifts (δ) are expressed in ppm downfield from tetramethylsilane using the residual protonated solvent as an internal standard. All coupling constants are expressed in hertz and are only given for 1H,1H couplings unless mentioned otherwise. Mass spectra were obtained with an Orbitrap LTQ XL (Thermo Scientific) spectrometer. 1,3,5-Tris(4-bromophenyl)benzene, [AuCl(SMe2)], and Ag2O were used as received from commercial sources. Satisfactory microanalytical data for [1](PF6)3 and the metal complexes could not be obtained, due to the large fluorine content in the hexafluorophosphate counterions. A complete set of NMR spectra is provided in the Supporting Information. Synthesis of Compound I.

Figure 3. Schematic representation of the molecular structure (side view) of the cation [3]3+ showing the π···π interactions between two central phenyl rings and the nonplanar geometry of the tricarbene ligands.

This convex distortion is only possible with the 1,3,5triphenylbenzene backbone. In addition, the NHC donors are not oriented perpendicular to the aromatic backbone, also contributing to the short separation of the central phenylene rings. Transmetalation of the trisilver complex [2](PF6)3 with 3 equiv of CuI in acetonitrile at ambient temperature yielded the trinuclear copper(I) hexacarbene complex [4](PF6)3 as a white solid in 63% yield with retention of the metallosupramolecular structure (Scheme 2). The formation of complex [4](PF6)3 was also confirmed by 1H and 13C{1H} NMR spectroscopy and HR-ESI mass spectrometry. In the 13C{1H} NMR spectrum, the resonance for the CNHC atoms was observed at δ 174.3 ppm (in DMSO-d6), in agreement with previously reported chemical shifts for CNHC atoms in moieties of the type {Cu(NHC)2}.13e,20 The magnetic equivalence of the resonance for the CNHC atoms is consistent with the 3-fold symmetry of the complex cation (for a full set of NMR spectra see the Supporting Information).

Samples of 1,3,5-tris(4-bromophenyl)benzene (0.272 g, 0.5 mmol), imidazole (0.204 g, 3.0 mmol), K2CO3 (0.346 g, 2.5 mmol), and CuSO4· 5H2O (0.025 g, 0.1 mmol) were mixed in a 50 mL Schlenk flask, and the solid mixture was heated to 160 °C for 24 h under an argon atmosphere. The reaction mixture was then cooled to ambient temperature and was washed three times with water (10 mL each). The remaining solid residue was extracted with methanol (150 mL). The solvent was removed to give compound I as a colorless solid. Yield: 0.171 g (0.339 mmol, 68%). 1H NMR (400 MHz, DMSO-d6): δ 8.36 (s, 3H, H1), 8.06 (d, 3J = 8.5 Hz, 6H, H6), 8.01 (s, 3H, H9), 7.84 (s, 3H, H3), 7.80 (d, 3J = 8.5 Hz, 6H, H5), 7.15 ppm (s, 3H, H2). 13C{1H} NMR (100 MHz, DMSO-d6): 140.6 (C8), 138.3 (C7), 136.4 (C4), 135.5 (C1), 129.9 (C2), 128.6 (C6), 124.4 (C9), 120.6 (C5), 117.9 ppm (C3). HRMS (ESI, positive ions): m/z 505.2132 (calcd for [I + H]+ 505.2141). Anal. Calcd for M·H2O (C33H24N6·H2O): C, 75.84; H, 5.01; N, 16.09. Found: C, 75.86; H, 5.03; N, 15.99. Synthesis of [1](Br)3.



CONCLUSIONS In summary, we prepared a nanometer-sized cylinder-like trinuclear AgI hexacarbene complex via metal-controlled selfassembly. The trinuclear silver complex undergoes transmetalation with [AuCl(SMe2)] or CuI to form the homotrinuclear hexacarbene complexes [3](PF6)3 and [4](PF6)3 with retention of the cylinder-like architecture. Use of the 1,3,5triphenylbenzene backbone leads to large (1.4 nm) M···M separations in the trinuclear complexes. In addition, the aromatic backbone is flexible enough to adopt a nonplanar geometry in the metal complexes to allow for π···π interactions between the central phenylene rings. The new structures may be related to previously reported, cylinder-like hexa-NHC structures developed by us, but here we developed a suitable method for increasing the M···M separation. Potentially, this could lead to an increased internal volume of the cavity while maintaining the inherent reactivity properties of the molecule. Such an increase was, however, not observed for the gold complex [3](PF6)3 due to the π···π interactions of the central phenyl rings. It remains to 6901

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

(C4), 138.5 (C8), 127.2 (C6), 123.5 (C5), 122.8 (C9), 122.7 (C2), 122.0 (C3), 46.8 (C10), 16.9 ppm (C11). HRMS (ESI, positive ions): m/z 500.4380 (calcd for [2]3+ 500.4390); m/z 823.1402 (calcd for [[2]PF6]2+ 823.1406). Synthesis of [3](PF6)3.

A sample of compound I (0.316 g, 0.626 mmol) and ethyl bromide (0.409 g, 3.756 mmol) were dissolved in DMF (10 mL), and the solution was heated to 100 °C for 48 h. A white solid precipitated over this period. After the reaction mixture was cooled to ambient temperature, the white precipitate was filtered off, washed with diethyl ether, and dried in vacuo to give the salt [1](Br)3. Yield: 0.344 g (0.414 mmol, 66%). 1H NMR (400 MHz, DMSO-d6): δ 10.05 (s, 3H, H1), 8.46 (s, 3H, H3), 8.29 (d, 3J = 8.7 Hz, 6H, H6), 8.17 (s, 3H, H9), 8.14 (s, 3H, H2), 8.00 (d, 3J = 8.7 Hz, 6H, H5), 4.35 (q, 3J = 7.3 Hz, 6H, H10), 1.56 ppm (t, 3J = 7.3 Hz, 9H, H11). 13C{1H} NMR (100 MHz, DMSO-d6): δ 140.7 (C7), 140.1 (C8), 135.1 (C1), 134.3 (C4), 128.9 (C6), 125.3 (C9), 123.0 (C2), 122.1 (C5), 121.0 (C3), 44.8 (C10), 14.8 ppm (C11). HRMS (ESI, positive ions): m/z 197.1073 (calcd for [1]3+ 197.1079). Anal. Calcd for [1]Br3·H2O (C39H39N6Br3·H2O): C, 55.14; H, 4.87; N, 9.90. Found: C, 55.11; H, 5.25; N, 9.94. Synthesis of [1](PF6)3.

To a solution of [2](PF6)3 (0.058 g, 0.030 mmol) in acetonitrile (5 mL) was added solid [AuCl(SMe2)] (0.027 g, 0.092 mmol). Immediately after the addition a white solid started to precipitate. The reaction mixture was stirred at ambient temperature for 16 h and was then slowly filtered through a pad of Celite until a clear filtrate was obtained. The filtrate was added slowly to diethyl ether (20 mL) to give a white solid, which was collected by filtration, washed with diethyl ether, and dried in vacuo. Yield: 0.046 g (0.021 mmol, 70%). 1H NMR (400 MHz, DMSOd6): δ 7.96 (s, 6H, H3), 7.90 (s, 6H, H2), 7.84 (d, 3J = 8.3 Hz, 12H, H6), 7.77 (d, 3J = 8.3 Hz, 12H, H5), 7.71 (s, 6H, H9), 4.49 (q, 3J = 7.3 Hz, 12H, H10), 1.63 ppm (t, 3J = 7.3 Hz, 18H, H11). 13C{1H} NMR (100 MHz, DMSO-d6): δ 180.6 (C1), 138.7 (C7), 138.4 (C8), 137.9 (C4), 126.9 (C6), 124.4 (C5), 122.8 (C2), 122.7 (br, C3, C9), 46.4 (C10), 16.7 ppm (C11). HRMS (ESI, positive ions): m/z 589.1665 (calcd for [3]3+ 589.1666); m/z 956.2329 (calcd for [[3]PF6]2+ 956.2320). Synthesis of [4](PF6)3.

A methanolic solution of NH4PF6 (0.270 g, 1.656 mmol in 5 mL of MeOH) was added to a methanolic solution of [1](Br)3 (0.344 g, 0.414 mmol in 10 mL of MeOH). The hexafluorophosphate salt [1](PF6)3 precipitated as a white solid. The solid was collected by filtration, washed with cold methanol and diethyl ether, and dried in vacuo. Yield: 0.334 g (0.325 mmol, 79%). 1H NMR (400 MHz, DMSO-d6): δ 9.88 (s, 3H, H1), 8.42 (s, 3H, H3), 8.29 (d, 3J = 8.6 Hz, 6H, H6), 8.18 (s, 3H, H9), 8.10 (s, 3H, H2), 7.96 (d, 3J = 8.6 Hz, 6H, H5), 4.33 (q, 3J = 7.3 Hz, 6H, H10), 1.56 ppm (t, 3J = 7.3 Hz, 9H, H11). 13C{1H} NMR (100 MHz, DMSO-d6): δ 140.8 (C7), 140.1 (C8), 135.1 (C1), 134.4 (C4), 128.9 (C6), 125.3 (C9), 123.0 (C2), 122.1 (C5), 121.1 (C3), 44.8 (C10), 14.7 ppm (C11). HRMS (ESI, positive ions): m/z 197.1073 (calcd for [1]3+ 197.1079). Synthesis of [2](PF6)3.

A sample of [2](PF6)3 (0.058 g, 0.030 mmol) was dissolved in 10 mL of acetonitrile, and to this solution was added solid CuI (0.018 g, 0.095 mmol). The reaction mixture was stirred for 16 h at ambient temperature. The resulting suspension was slowly filtered through a pad of Celite to give a clear solution. The filtrate was concentrated to 2 mL, and addition of 10 mL of diethyl ether resulted in the precipitation of a white solid. The white solid was filtered off, washed with diethyl ether, and dried in vacuo. Yield: 0.034 g (0.019 mmol, 63%). 1H NMR (200 MHz, DMSO-d6): δ 7.98 (s, 6H, H3), 7.83 (s, 6H, H2), 7.78 (s, br, 24H, H5, H6), 7.64 (s, 6H, H9), 4.45 (q, 3J = 7.2 Hz, 12H, H10), 1.61 ppm (t, 3 J = 7.2 Hz, 18 H, H11). 13C{1H} NMR (50 MHz, DMSO-d6): δ 174.3 (C1), 137.9 (C7), 137.3 (br, C4, C8), 126.1 (C6), 122.3 (C5), 121.9 (C9), 121.5 (C2), 120.6 (C3), 45.9 (C10), 16.4 ppm (C11). HRMS (ESI, positive ions): m/z 455.7953 (calcd for [4]3+ 455.7964). X-ray Crystallography. Single crystals of [3](PF6)3·CH3CN· 5Et2O for an X-ray diffraction study have been obtained by slow vapor diffusion of diethyl ether into a saturated acetonitrile solution of [3](PF6)3 at ambient temperature. X-ray diffraction data were collected at T = 153(2) K with a Bruker APEX-II CCD diffractometer equipped with a rotation anode using graphite-monochromated Mo Kα radiation (λ = 0.71073 Å). Diffraction data were collected over the full sphere and

To a mixture of [1](PF6)3 (0.080 g, 0.078 mmol) and Ag2O (0.027 g, 0.117 mmol) was added acetonitrile (10 mL). The resulting suspension was heated to 60 °C for 48 h under exclusion of light. After the reaction mixture was cooled to ambient temperature, the obtained suspension was filtered through a pad of Celite to give a clear solution. The filtrate was concentrated to 3 mL, and addition of 15 mL of diethyl ether resulted in the precipitation of a white solid. The precipitate was filtered off, washed with diethyl ether, and dried in vacuo. Yield: 0.058 g (0.030 mmol, 77%). 1H NMR (400 MHz, DMSO-d6): δ 7.97 (s, 6H, H3), 7.87 (s, 6H, H2), 7.79 (s br, 24H, H5, H6), 7.66 (s, 6H, H9), 4.43 (q, 3J = 7.3 Hz, 12H, H10), 1.60 ppm (t, 3J = 7.3 Hz, 18H, H11). 13 C{1H} NMR (100 MHz, DMSO-d6): δ 178.3 (C1), 138.8 (C7), 138.6 6902

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

(9) (a) Pluth, M. D.; Bergman, R. G.; Raymond, K. N. Science 2007, 316, 85−88. (b) Yoshizawa, M.; Tamura, M.; Fujita, M. Science 2006, 312, 251−254. (10) Yoshizawa, M.; Klosterman, J. K.; Fujita, M. Angew. Chem., Int. Ed. 2009, 48, 3418−3438. (11) (a) Jahnke, M. C.; Hahn, F. E. Top. Organomet. Chem. 2010, 30, 95−129. (b) Melaimi, M.; Soleilhavoup, M.; Bertrand, G. Angew. Chem., Int. Ed. 2010, 49, 8810−8849. (c) Mercs, L.; Albrecht, M. Chem. Soc. Rev. 2010, 39, 1903−1912. (d) Poyatos, M.; Mata, J. A.; Peris, E. Chem. Rev. 2009, 109, 3677−3707. (e) Hahn, F. E.; Jahnke, M. C. Angew. Chem., Int. Ed. 2008, 47, 3122−3172. (12) (a) Han, Y.-F.; Jin, G.-X.; Hahn, F. E. J. Am. Chem. Soc. 2013, 135, 9263−9266. (b) Schmidtendorf, M.; Pape, T.; Hahn, F. E. Dalton Trans. 2013, 42, 16128−16141. (c) Schmidtendorf, M.; Pape, T.; Hahn, F. E. Angew. Chem., Int. Ed. 2012, 51, 2195−2198. (d) Gierz, V.; MaichleMössmer, C.; Kunz, D. Organometallics 2012, 31, 739−747. (e) Cure, J.; Poteau, R.; Gerber, I. C.; Gornitzka, H.; Hemmert, C. Organometallics 2012, 31, 619−626. (f) Conrady, F. M.; Fröhlich, R.; Schulte to Brinke, C.; Pape, T.; Hahn, F. E. J. Am. Chem. Soc. 2011, 133, 11496−11499. (g) Rit, A.; Pape, T.; Hahn, F. E. Organometallics 2011, 30, 6393−6401. (h) Liu, Q.-X.; Yao, Z.-Q.; Zhao, X.-J.; Chen, A.-H.; Yang, X.-Q.; Liu, S.W.; Wang, X.-G. Organometallics 2011, 30, 3732−3739. (i) Saito, S.; Saika, M.; Yamasaki, R.; Azumaya, I.; Masu, H. Organometallics 2011, 30, 1366−1373. (j) Radloff, C.; Weigand, J. J.; Hahn, F. E. Dalton Trans. 2009, 9392−9394. (k) Radloff, C.; Hahn, F. E.; Pape, T.; Fröhlich, R. Dalton Trans. 2009, 7215−7222. (l) Hahn, F. E.; Radloff, C.; Pape, T.; Hepp, A. Organometallics 2008, 27, 6408−6410. (13) (a) Schulte to Brinke, C.; Pape, T.; Hahn, F. E. Dalton Trans. 2013, 42, 7330−7337. (b) Maity, R.; Rit, A.; Schulte to Brinke, C.; Daniliuc, C. G.; Hahn, F. E. Chem. Commun. 2013, 49, 1011−1013. (c) Ahamed, B. N.; Dutta, R.; Ghosh, P. Inorg. Chem. 2013, 52, 4269− 4276. (d) Wei, S.; Li, X.; Yang, Z.; Lan, J.; Gao, G.; Xue, Y.; You, J. Chem. Sci. 2012, 3, 359−363. (e) Rit, A.; Pape, T.; Hepp, A.; Hahn, F. E. Organometallics 2011, 30, 334−347. (f) Rit, A.; Pape, T.; Hahn, F. E. J. Am. Chem. Soc. 2010, 132, 4572−4573. (g) Radloff, C.; Gong, H.-Y.; Schulte to Brinke, C.; Pape, T.; Lynch, V. M.; Sessler, J. L.; Hahn, F. E. Chem.Eur. J. 2010, 16, 13077−13081. (h) Hahn, F. E.; Radloff, C.; Pape, T.; Hepp, A. Chem.Eur. J. 2008, 14, 10900−10904. (14) (a) Gonell, S.; Poyatos, M.; Peris, E. Chem.Eur. J. 2014, 20, 5746−5751. (b) Zhang, C.; Wang, J.-J.; Liu, Y.; Ma, H.; Yang, X.-L.; Xu, H.-B. Chem.Eur. J. 2013, 19, 5004−5008. (c) Karimi, B.; Akhavan, P. F. Chem. Commun. 2011, 47, 7686−7688. (d) Choi, J.; Yang, H. Y.; Kim, H. J.; Son, S. U. Angew. Chem., Int. Ed. 2010, 49, 7718−7722. (e) Mercs, L.; Neels, A.; Stoeckli-Evans, H.; Albrecht, M. Dalton Trans. 2009, 7168−7178. (f) Williams, K. A.; Boydston, A. J.; Bielawski, C. W. Chem. Soc. Rev. 2007, 36, 729−744. (g) Boydston, A. J.; Bielawski, C. W. Dalton Trans. 2006, 4073−4077. (h) Boydston, A. J.; Williams, K. A.; Bielawski, C. W. J. Am. Chem. Soc. 2005, 127, 12496−12497. (i) Guerret, O.; Solé, S.; Gornitzka, H.; Teichert, M.; Trinquier, G.; Bertrand, G. J. Am. Chem. Soc. 1997, 119, 6668−6669. (15) (a) Lin, J. C. Y.; Huang, R. T. W.; Lee, C. S.; Bhattacharyya, A.; Hwang, W. S.; Lin, I. J. B. Chem. Rev. 2009, 109, 3561−3598. (b) Lin, I. J. B.; Vasam, C. S. Coord. Chem. Rev. 2007, 251, 642−670. (c) Garrison, J. C.; Youngs, W. J. Chem. Rev. 2005, 105, 3978−4008. (16) Segarra, C.; Guisado-Barrios, G.; Hahn, F. E.; Peris, E. Organometallics 2014, 33, 5077−5080. (17) (a) Fujita, M.; Oguro, D.; Miyazawa, M.; Oka, H.; Yamaguchi, K.; Ogura, K. Nature 1995, 378, 469−471. (b) Yoshizawa, M.; Tamura, M.; Fujita, M. J. Am. Chem. Soc. 2004, 126, 6846−6847. (c) Kumazawa, K.; Yamanoi, Y.; Yoshizawa, M.; Kusukawa, T.; Fujita, M. Angew. Chem., Int. Ed. 2004, 43, 5936−5940. (18) (a) Wang, Y.-T.; Chang, M.-T.; Lee, G.-H.; Peng, S.-M.; Chiu, C.W. Chem. Commun. 2013, 49, 7258−7260. (b) Gonell, S.; Alabau, R. G.; Poyatos, M.; Peris, E. Chem. Commun. 2013, 49, 7126−7128. (c) Gonell, S.; Poyatos, M.; Peris, E. Angew. Chem., Int. Ed. 2013, 52, 7009−7013. (d) Segarra, C.; Linke, J.; Mas-Marza, E.; Kuck, D.; Peris, E. Chem. Commun. 2013, 49, 10572−10574. (e) Williams, K. A.; Bielawski, C. W. Chem. Commun. 2010, 46, 5166−5168.

were corrected for absorption. Structure solutions were found with the SHELXS-97 package21 using direct methods and were refined with SHELXL-9721 against |F2| values of all data using first isotropic and later anisotropic thermal parameters for all non-hydrogen atoms. Hydrogen atoms were added to the structure models on calculated positions. Crystal data and structure refinement details for compound [3](PF6)3·CH3CN·5Et2O: C100H125N13Au3F18O5P3, Mr = 2614.94, colorless crystal, 0.23 × 0.07 × 0.03 mm3, monoclinic, space group P21/n, Z = 4, a = 20.4029(11) Å, b = 13.2486(8) Å, c = 33.885(2) Å, β = 93.936(3)°, V = 9137.8(9) Å3, ρcalcd = 1.901 g cm−3, μ = 4.960 mm−1, ω and φ scans, 131138 measured intensities (2.3° ≤ 2θ ≤ 62.1°), 28577 independent intensities (Rint = 0.0841), and 17844 observed intensities (I ≥ 2σ(I)), refinement of 996 parameters against |F2| of all measured intensities with hydrogen atoms on calculated positions. R = 0.0585, Rw = 0.1473, Rall = 0.1105, and Rw,all = 0.1632. The asymmetric unit contains one formula unit of compound [3](PF6)3, one molecule of acetonitrile, and five molecules of diethyl ether. Three of the six N-ethyl substituents, two imidazolin-2-ylidene rings, and two hexafluorophosphate anions are disordered. The positional parameters of disordered atoms were refined with isotropic displacement parameters, and no hydrogen positions were calculated for disordered carbon atoms. The electron density of five diethyl ether molecules was removed from the least-squares calculations by means of the SQUEEZE function of the PLATON program.



ASSOCIATED CONTENT

S Supporting Information *

Figures giving NMR spectra of all new compounds and a CIF file containing the X-ray crystallographic data for [3](PF6)3· CH3CN·5Et2O.This material is available free of charge via the Internet at http://pubs.acs.org.



AUTHOR INFORMATION

Corresponding Authors

*E-mail for E.P.: [email protected]. *E-mail for F.E.H.: [email protected]. Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS The authors thank the Deutsche Forschungsgemeinschaft (SFB 858), and N.S. thanks the NRW Graduate School of Chemistry, Münster, Germany, for a predoctoral grant.



REFERENCES

(1) Lehn, J.-M.; Rigault, A.; Siegel, J.; Harrowfield, J.; Chevrier, B.; Moras, D. Proc. Natl. Acad. Sci. U.S.A. 1987, 84, 2565−2569. (2) (a) Fujita, M.; Tominaga, M.; Hori, A.; Therrien, B. Acc. Chem. Res. 2005, 38, 371−380. (b) Fujita, M. Chem. Soc. Rev. 1998, 27, 417−425. (3) (a) Pluth, M. D.; Raymond, K. N. Chem. Soc. Rev. 2007, 36, 161− 171. (b) Caulder, D. L.; Raymond, K. N. Acc. Chem. Res. 1999, 32, 975− 982. (4) (a) Chakrabarty, R.; Mukherjee, P. S.; Stang, P. J. Chem. Rev. 2011, 111, 6810−6918. (b) Leininger, S.; Olenyuk, B.; Stang, P. J. Chem. Rev. 2000, 100, 853−908. (5) (a) Smulders, M. M. J.; Riddell, I. A.; Browne, C.; Nitschke, J. R. Chem. Soc. Rev. 2013, 42, 1728−1754. (b) Nitschke, J. R. Acc. Chem. Res. 2007, 40, 103−112. (6) De, S.; Mahata, K.; Schmittel, M. Chem. Soc. Rev. 2010, 39, 1555− 1575. (7) Ward, M. D. Chem. Commun. 2009, 4487−4499. (8) (a) Birkmann, B.; Fröhlich, R.; Hahn, F. E. Chem.Eur. J. 2009, 15, 9325−9329. (b) Han, Y.-F.; Jia, W.-G.; Lin, Y.-J.; Jin, G.-X. Angew. Chem., Int. Ed. 2009, 48, 6234−6238. (c) Leeland, J. W.; White, F. J.; Love, J. B. J. Am. Chem. Soc. 2011, 133, 7320−7323. (d) Mal, P.; Breiner, B.; Rissanen, K.; Nitschke, J. R. Science 2009, 324, 1697−1699. 6903

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904

Organometallics

Article

(19) (a) Mejuto, C.; Guisado-Barrios, G.; Peris, E. Organometallics 2014, 33, 3205−3211. (20) Hu, X.; Castro-Rodriguez, I.; Olsen, K.; Meyer, K. Organometallics 2004, 23, 755−764. (21) SHELXS-97, SHELXL-97: Sheldrick, G. M. Acta Crystallogr., Sect. A 2008, 64, 112−122.

6904

dx.doi.org/10.1021/om500973b | Organometallics 2014, 33, 6898−6904