INTEGRATING RECORDER
More
speed,
flexibility
and reading
than any other integrating
Flush-Mounting or Portable
ease
recorder
Accurate, quantitative analysis of any variable that depends on the precise measurement and integration of the curve may be obtained with the TI Integrating Recorder. The integrator channel is installed as a second channel in a standard wide-grid, single-channel servo/riter recorder. It consists of a special potentiometer-amplifier-servo arrangement and activates an overlapping "area trace" automatically and simultaneously with the signal trace. Three different maximum count rates are readily obtained through an adjustable gear system up to a maximum of 40,000 area counts per minute. The counting rate linearity is ± 0.5% of full scale.
The New T/l Integrating Recorder is particularly suited for Gas Chromatography applications.
Note that the integrating signal utilizes the full chart scale to provide faster, easier reading. Traverse of the full scale represents 1,000 counts. If the integral exceeds 1,000 counts, the integral "folds" and completes its excursion in the opposite direction. You may reset the pen to either margin between each peak or at the start of each integration for easier interpretation. The integrating circuit may be set to any assumed zero point in the span of the recorder signal. The Integrator Recorder is offered with either portable or flush-mounting servo/riter recorders. Or, the Integrator Unit may be factory installed in your existing wide or dual chart servo/riter recorder. In fact, many flexible arrangements are possible . . . let TI's recorder engineers work with you on specific applications.
*A Trademark of Texas
Write ON DISPLAY DURING THE PITTSBURGH CONFERENCETEXAS INSTRUMENTS SUITE, PENN-SHERATON HOTEL
for complete
information
Instruments
...
TEXAS INSTRUMENTS I N C O R P O R A T E D APPARATUS
3609 B U F F A L O Circle No. 108 on Readers' Service Card
SPEEDWAY
DIVISION
·
H O U S T O N 6, T E X A S
