Thermal risk assessment of levulinic acid hydrogenation to γ

Jul 30, 2018 - This renewable, biodegradable and ecofriendly feedstock could present some new risks that should be taken into account. In this context...
0 downloads 0 Views 1MB Size
Subscriber access provided by READING UNIV

Full Paper

Thermal risk assessment of levulinic acid hydrogenation to #-valerolactone Yanjun Wang, Lamiae Vernieres-Hassimi, Valeria CassonMoreno, Jean-Pierre Hebert, and Sebastien Leveneur Org. Process Res. Dev., Just Accepted Manuscript • DOI: 10.1021/acs.oprd.8b00122 • Publication Date (Web): 30 Jul 2018 Downloaded from http://pubs.acs.org on July 31, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

Thermal risk assessment of levulinic acid hydrogenation to γ-valerolactone Yanjun Wang1, Lamiae Vernières-Hassimi1, Valeria Casson-Moreno3, Jean-Pierre Hébert1, Sébastien Leveneur*1,2 1

Normandie Univ, INSA Rouen, UNIROUEN, LSPC, EA4704, 76000 Rouen, France, E-mail :

[email protected] 2

Laboratory of Industrial Chemistry and Reaction Engineering, Johan Gadolin Process

Chemistry Centre, Åbo Akademi University, Biskopsgatan 8, FI-20500 Åbo/Turku, Finland. 3

Dipartimento di Ingegneria Chimica, Civile, Ambientale e dei Materiali, Alma Mater

Studiorum—Università di Bologna, via Terracini 28, 40131 Bologna, Italy

1 Environment ACS Paragon Plus

Organic Process Research & Development 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

TOC graphic

2 Environment ACS Paragon Plus

Page 2 of 44

Page 3 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

Abstract.

The use of biomass as feedstock to produce chemicals or biofuels is increasing. This renewable, biodegradable and ecofriendly feedstock could present some new risks that should be taken into account. In this context, a thermal risk assessment of levulinic acid (LA) hydrogenation to γ-valerolactone (GVL), which is a platform molecule produced from lignocellulosic biomass process, catalyzed by Ru/C in water was performed .

A kinetic model including an energy balance under near-adiabatic conditions was built. For that, different experiments at different operating conditions (levulinic acid concentration and catalyst loading) were performed by using an Advanced Reactive System Screening Tool (ARSST) to estimate the kinetic constants of this reaction system. To make a thermal risk assessment of a chemical reaction system, two safety parameters should be defined: Time-toMaximum Rate under adiabatic conditions (TMRad) and adiabatic temperature rise (∆Tad). The parameter TMRad defines the time to reach the maximum temperature rate and characterizes the probability of risk. The parameter ∆Tad is the difference between the maximum and initial reaction temperature and characterizes the severity of risk. Based on this kinetic model, these two parameters were determined at different operating conditions. With the aid of a risk matrix, it was possible to determine the safe operating conditions (temperature, levulinic acid concentration, hydrogen pressure and catalyst loading).

Keywords: Thermal risk assessment, biomass valorization, hydrogenation, levulinic acid, γ valerolactone, kinetic modeling

3 Environment ACS Paragon Plus

Organic Process Research & Development 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1. INTRODUCTION Due to fossil depletion, environmental issues, global warming and energy dependence from some fossil-energy-exporting countries, the development of processes and technologies for the production of energy from renewable sources is increasing worldwide.1 In particular, the use of any type of biomass as raw materials is intensely increasing, along with the number and potentiality of bioenergy production plants.2

For the valorization of biomass, the tendency is to work on the production of platform molecules.3 Furthermore, lignocellulosic biomass should be privileged because of its noncompetition with food. There are different potential platform molecules issued from lignocellulosic biomass like sorbitol, furfural, hydroxymethylfurfural (HMF), levulinic acid (LA), lignin monomer, ethanol, butanol or lactic acid.4,5 Levulinic acid is of particular interest, and has been identified as one of the twelve promising building blocks by the US department of energy.3

LA is used as solvent, antifreeze, food flavoring agent, intermediate for pharmaceuticals, and for plasticizers synthesis.6 As a platform molecule, levulinic acid can be transformed into different chemicals such as diphenolic acid (as replacement for bisphenol A in polycarbonates, epoxy resins, and other polymers, or being used in lubricants, adhesives, and paints), pentanoic acid, angelicalactones, 2-butanone or γ-valerolactone.

4 Environment ACS Paragon Plus

Page 4 of 44

Page 5 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

Different processes have been developed for the production of LA from lignocellulosic biomass (LCB).7 One of the most consolidated technologies currently existing for LA industrial production is the Biofine process.8-10 By further hydrogenation reaction, LA can be converted to γ-valerolactone (GVL), which is in turn, a key platform molecule for the production of bio-chemicals/-fuels, and is the cornerstone of cascade processes for the production of liquid fuels. The steps of such process are depicted in Figure 1.

Figure 1. Steps of the valorization process of LCB biomass: the production of LA and its reduction to GVL. Alonso et al.11 have also demonstrated that γ-valerolactone is a sustainable platform molecule. Several articles have shown the possibility to produce GVL by hydrogenation of aqueous solution of levulinic acid: the use of molecular hydrogen12-19 or the use of a hydrogen donor such as from the decomposition of formic acid20-22 or from alcohols such as ethanol and 2propanol.23,24 This strategy avoids to implement a levulinic acid vaporization step or a dehydration step. From an economical, safety and energy point of view, this process should be developed for mild temperature and pressure conditions. This approach could elegantly reduce the number of processing steps and the operating cost. To this aim, different heterogeneous catalysts have been developed. Among various noble metals (for example Ru, Pt, Pd, Ir, Re, Rh, Ni, etc.) supported on different materials (Al2O3, SiO2, C), Ru catalyst is particularly active

5 Environment ACS Paragon Plus

Organic Process Research & Development 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

and selective for this reaction.25-28 At the laboratory scale, one of the most efficient way of GVL production is the hydrogenation of aqueous LA with H2 over heterogeneous catalyst Ru/C.29

The design and scale-up of new processes and technologies using biomass feedstock might involve emerging risks according to the International Risk Governance Council: issues that are perceived to be potentially significant, but they may not be fully understood and assessed and therefore correctly managed, e.g. bio-hazards, thermal risk and dust explosion.

On one hand, processes using biomass are usually perceived as thermally and/or toxicology safer or even completely harmless with respect to other conventional chemical processes. On the other hand, using biomass as a raw material entails hazardous materials and severe process conditions such as acid hydrolysis, high pressures and temperatures, and a risk assessment should be performed for these chemical processes.30,31 Society could accept such processes based on biomass, i.e., biorefinery, because it can promote new jobs, consume local biomass feedstock and waste, diminish the dependency towards fossil feedstock and use ecofriendly raw materials. Thus, to preserve the development of such sustainable industries and its image towards public opinion, risk assessment of these processes should be done.

For example, in the last decade, there have been several accidents involving bioenergy production and feedstock supply chain that raised concern on the safety of such technologies.3234

The analysis of major accidents showed that their number is growing faster than bioenergy

6 Environment ACS Paragon Plus

Page 6 of 44

Page 7 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

production, and the comparison with the number of accidents in oil refining activities shows that the increasing trend is specific to bioenergy sector.32 Although different kinetic models for the hydrogenation of LA or alkyl levulinates by using Ru/C are described in the literature,12,14,29,35,36 none of them have investigated the thermal aspect of this reaction. One should keep in mind that hydrogenation of unsaturated compounds are exothermic reactions, and the risk of thermal runaway is not negligible.37,38 Reaction enthalpy for the hydrogenation of LA to GVL was found to be -74.47 kJ.mol-1.39 This value cannot be neglected.

It has been demonstrated that thermal runaway is a major threat in chemical industry.40,41 In this panorama, thermal risk assessment for the hydrogenation of levulinic acid to γvalerolactone catalyzed by Ru/C in water was proposed in this paper (Figure 2). A kinetic model under near-adiabatic conditions was built based on a homogeneous batch reactor model and experiments performed in ARSST system. To make a thermal risk assessment, batch operation should be used because it is the most conservative system. Indeed, in batch process under adiabatic mode, thermal accumulation is higher compared to semi-batch or continuous process.

Then, the model was employed to determine the adiabatic temperature rise ∆Tad, which characterizes the severity of the thermal risk, and the Time-to-Maximum Rate under adiabatic conditions TMRad, which characterizes the probability of the thermal risk. The benefit of such approach is to be able to determine the safety parameters at different operating conditions which is not possible by using a zero-order approach.42

7 Environment ACS Paragon Plus

Organic Process Research & Development 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

At last, a risk matrix based on severity and probability of thermal risk was created for thermal risk assessment at different reaction conditions including levulinic acid concentration, temperature, catalyst loading and hydrogen pressure.

Figure 2. Methodology of thermal risk assessment for hydrogenation of LA to GVL.

8 Environment ACS Paragon Plus

Page 8 of 44

Page 9 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

2. RESULTS AND DISCUSSION 2.1. Kinetic model Hydrogenation of levulinic acid to γ-valerolactone includes two steps: the first step is the hydrogenation of the ketone group of levulinic acid leading to the formation of 4hydroxypentanoic acid (HPA). The second step is the ring closure reaction of HPA to γvalerolactone. 14,35 The mechanism of hydrogenation of levulinic acid is illustrated in Figure 3.

Figure 3. Reaction mechanism for the hydrogenation of levulinic acid to γ-valerolactone. Piskun et al.35 have developed two models: one based on a Langmuir-Hinshelwood model for both reactions and the other one by assuming an equilibrium reaction for the ring-closure one. One of the objectives of this article was to develop a kinetic model under adiabatic conditions, which takes into account the concentration of LA, proton, H2 pressure and catalyst loading. For that reason, the kinetic model of Piskun et al.35 describing the kinetic model as homogeneous model was used in this study.

9 Environment ACS Paragon Plus

Organic Process Research & Development 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The hydrogenation of LA to HPA on the catalyst is described by a Langmuir-Hinshelwood model (eq 1).  = 

 . . . 

.   .   . 

(1) where, KLA, KGVL and KHPA are the adsorption coefficients for LA, GVL and HPA, respectively. These thermodynamic constants (KLA, KGVL and KHPA), which do not depend on reactor characteristic, were assumed to be the same than the ones estimated by Piskun et al.32 As the first reaction depends on the heterogeneous catalyst and on the gas-liquid, liquid-solid mass transfers, thus this reaction is sensitive to the stirring system. For that reason, the kinetic constants for the first reaction, k1(TRef) and Ea1, were estimated in this work and compared to the ones obtained from the work of Piskun et al.35 For the second reaction, reversible transformation of HPA to GVL occurs in the bulk phase and is catalyzed by Brönsted acid. As the second reaction occurs in the bulk aqueous phase and does not involve the heterogeneous catalyst. Thus, this reaction can be considered to have the same kinetics in our system as the one of Piskun et al.35 Hence, in this work, the kinetic constants of the second reaction estimated by Piskun et al.35 were used. Originally, Piskun et al.35 have described the reversible transformation of HPA to GVL as 2 reactions (direct and indirect reactions) occurring in the bulk phase and catalyzed by Brönsted acid. These two reactions can be summarized into one reaction and expressed as: 

 =  .      − !"#$

(2) ACS Paragon10 Plus Environment

Page 10 of 44

Page 11 of 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Organic Process Research & Development

where, K2 is the equilibrium constant of the second reversible reaction and can be expressed as 

% = . According to Piskun et al.,29 the concentration of protons can be expressed as:  &

()** # ()** 

   = '% . + % .

(3) ()** ()** where, % and % are the dissociation constants of levulinic acid and 4-hydroxypentanoic

acid. From the kinetic data of Piskun et al.,29 it was possible to estimate % by a van’t Hoff law: 5∆7,

% , = % , = 90°0. 123 4

9

 :

. −

 $> ;