TiO2 Catalyst and the Performance of

Addition/Correction Cite This: Ind. Eng. Chem. Res. 2017, 56, 14931−14931

pubs.acs.org/IECR

Correction to “Preparation of Au/TiO2 Catalyst and the Performance of Liquid Methanol Catalytic Oxidation to Formic Acid” Da Shi, Jianfang Liu, and Shengfu Ji* State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China

Ind. Eng. Chem. Res. 2017, 56 (39), 11028−11033 (DOI: 10.1021/acs.iecr.7b02506) Page 11032. Some information in the acknowledgment for the original paper1 is missing. The acknowledgment needs to be corrected as follows:

■

ACKNOWLEDGMENTS Financial support from the National Natural Science Foundation of China (Grant No. 21573015) is gratefully acknowledged. The Research Complex at Harwell, Oxford is acknowledged for use of its facilities and support of their staff. UK Catalysis Hub is kindly thanked for resources and support provided. The authors also wish to acknowledge the staff from UK Catalysis Hub (Dr. Scott M. Rogers, Dr. Peter P. Wells, and Dr. Nikolaos Dimitratos) for their help regarding catalyst preparation and the project discussion.

■

AUTHOR INFORMATION

■

REFERENCES

Corresponding Author

*Tel: +86-010-64419619. Fax: +86-010-64419619. E-mail: [email protected]. (1) Shi, D.; Liu, J. F.; Ji, S. F. Preparation of Au/TiO2 catalyst and the performance of liquid methanol catalytic oxidation to formic acid. Ind. Eng. Chem. Res. 2017, 56 (39), 11028.

Published: December 11, 2017 © 2017 American Chemical Society

14931

DOI: 10.1021/acs.iecr.7b04697 Ind. Eng. Chem. Res. 2017, 56, 14931−14931