Tunable organic dye lasers - ACS Publications - American Chemical

DEVELOPMEST of the continuously tunable organic dye laser makes a whole new world accessible to spectroscopists, photochemists, and indeed to all scientists interested in the interaction of light and matter. The key to this new world is continuous tunability. As light sources, the fixed-frequency lasers developed in the last decade have proffered high intensity. extreme spectral purity, coherence, and collimation to a n essentially revolutionary degree. These characteristics have already been vigorously exploited in research in Rayleigh scattering, Brillouin scattering, Raman scattering. and nonlinear optical interactions on time scales ranging from picosecond t o steady state. For spectroscopy or photochemical applications, however, these fixed-frequency lasers suffer one serious limitation-namely, that laser emission occurs only a t certain narrow, discrete wavelengths that are characteristic of the lasing material and hence are not a t the disposal of the chemist. However, if the chemist chooses a different laser-active medium and hence a different discrete laser wavelength, the wavelength of laser emission is not a variable over which he has any “fine-grained” control. The tunable dye laser shares the intensity, monochromaticity, coherence,

J . PIERCE WEBB Research Laboratories Eastman Kodak Co. Rochester, NY 14650

and collimation characteristics of the fixed-frequency lasers and in addition completes the arsenal by providing continuous wavelength tunability. What differentiates an organic dye molecule from other laser-active materials and affords the dye laser its remarkable capacity to be continuously tuned over hundreds of angstroms? The answer, qualitatively, is t h a t a dye has a broad, continuous fluorescence spectrum rather than one or a series of narrow, discrete fluorescent emission lines characteristic of other lasing materials. Lasing, of course, can occur only a t wavelengths where natural fluorescence is amplified. i.e., by a “chain reaction” process where incident photons interact with excited-state molecules, atoms. or ions, stimulating them downward to a lower energy state with (stimulated fluorescent) emission of a second photon of energy (n-avelength) equal to that of the triggering photon. Thus, continuous tunability requires a continuous emission spectrum from the laser-active materia 1. Before examining the absorption and emission characteristics of the dyes more closely, and then developing a detailed theory of dye laser operation, it is worthwhile t o review qualitatively the physical form of a typical laser. As indicated in

Figure 1, a laser-active material with gain G is placed between two mirrors. The laser-active material could be a suitable organic dye dissolved in a solvent, Nd-++-doped glass, Cr+ + +-doped A1203,He-Ke gaseous mixture, etc. The mirrors could be planar and accurately parallel or curved in such a way that radiation trapped bet ween them will reflect back upon itself and retraverse the active medium many times without “walking out.” If a population inr-ersion has been induced in the lasing material so that there are more molecules in a higher energy level than a lower one, then trapped radiation with a frequency v equal t o this energylevel difference/h will be amplified by stimulated emission during each pass through the active region. The population inversion is essential for amplification, since the cross sections for stimulated emission and absorption are equal. The quantum mechanical process of stimulated emission requires t h a t each secondary photon emitted in a stimulated transition have the same wavelength, direction of propagation, and phase as the triggering photon. Thus, stimulated emission continues to funnel energy preferentially into the “trapped radiation” mode. The cource of this energy is the excitation that “pumps” the laser-active material to its ex-

Tunable Organic Dye Lasers Potential uses of dye lasers are enhanced by their relative simplicity when compared to tunable parametric oscillators and even to many fixed-frequency lasers

30A

ANALYTICAL CHEMISTRY, VOL. 44, NO. 6, MAY 1972

Report for Analytical Chemists

cited state, leading to its population inversion. Laser threshold occurs in a mode when the round-trip photon gain (from stimulated emission) exceeds the round-trip losses (from mirror transmission, scattering within the medium, absorption at the laser wavelength, etc.) in the mode. Organic Dyes as Laser-Active Media

After this qualitative review of a generalized laser, let us turn to organic dyes as laser-active molecules and then develop a theory of dye-laser operation. An organic dye molecule is a large, complicated quantum mechanical system. Rhodamine 6G, a particularly efficient laser dye, is illustrated in Figure 2. TThen one considers the conjugated chain t h a t comprises the chromophore of a dye, it is useful to approximate this complex system as a core plus a 7-electron cloud. The core is comprised of the constituent atomic nuclei plus the tightly bound, inner-shell electrons, all bound together by o-bonding electrons. These r-bonding electrons are outer-shell, valence electrons, but they are well localized (between atoms) in the u bonds and do not participate in optical transitions. I n addition to valence electrons localized in bonding u orbitals, there

are other valence electrons in X orbitals. The ?T orbitals of adjacent atoms overlap, forming, in essence, large (molecule-sized) wave functions that are delocalized over most of the molecule. The electrons in these delocalized x wave functions are not so tightly bound as the a-bonding electrons, and they are the electrons that are involved in the near uv, visible, and near ir optical transitions. T o a fair degree of approximation, the x electrons can be thought of as a one-dimensional electron gas of more-or-less free electrons. This picture has been extensively and quantitatively developed by Hans Kuhn in his “Electron Gas Theory of the Color of Dyes” articles ( I ) . Thus, a (spatially ) longer chromophore, i.e., a longer conjugated chain with its associated x electrons, can be considered a longer “box” for the 7 electron wave functions, and the energy-level spacing is correspondingly reduced. Everything else being equal, then absorption and fluorescence will occur a t longer wavelengths for longer chromophores. This is borne out rather well quantitatively in cyanine dyes of the same family but with various conjugated chain lengths. Because the molecule is so large and has so many constituents, i.e., so many bonds and internal degrees of freedom, there is a great deal of

opportunity for vibration and rotation along different bonds, and the simple “electron-in-a-box” energy levels are split into many, virtually continuous levels. Figure 3 is a schematic representation of the r-orbital energy levels of a dye molecule. Each submanifold, denoted by S,and T,, is a single “electron-in-a-box” level, and it is split into a continuum of vibrational levels (heavy lines) and rotational levels. Excited electronic states (1, 2, etc.) can be either singlet or triplet, with triplet submanifolds usually slightly lower in energy than the corresponding singlet levels. Excitation of the first excited singlet state (by absorption of pump light) and emission (spontaneous or stimulated) are indicated by heavy, yertical arrows. It is important to note that allowed (electric dipole) radiative transitions occur only between states of the same multiplicity, i.e.,

ocooE -

Figure 2.

Rhodamine 6G molecule

Figure 1. Typical laser cavity Mi, output mirror, partially transmitting: Mz, totally reflecting mirror; G, laser active material; €, excitation

ri ANALYTICAL CHEMISTRY, VOL. 44, NO. 6, MAY 1972 ’

31 A


SINGLET STATES

SPECTRAL IMAGING, INC.

Figure 3. Sche. matic representation of r - o r b i t a l energy levels of dye molecule

TRIPLET STATES

I

Z

Q c

Y‘

Heavy horizontal lines represent vibrational states; lighter lines represent rotational fine structure. Excita. tion and laser ernis. sion are represented by transitions A b and B -+ a, respectively. Other transitions represent losses in laser process

MODEL HTS-255-15

-

C ;TI

-

Hadamard Transform Analytical Spectrometer

/

/ /

T T

/ /

/

/ /

or rotational states a t or near level A in the electronic ground singlet

multislit efficiency:

vibrationally excited states b in the first excited electronic manifold S,. (A-B transitions are much less probable.)

at

3.5 cm;’ a v e r a g e

S P E C T R A L IMAGING, I N ( . 572

ANNURSNAC HILL ROAD,

CONCORD, MASSACHUSETTS 01742

617-259-83 30

1

manifold, or by radiationless “in: tersystem crossing” from the excited singlet manifold S, t o the triplet 1 manifold T 1 with a rate constant

1

CIRCLE 185 ON READER SERVICE CARD

32A

0


k S T . Thermal equilibration is the most rapid relaxation process, occurring on a picosecond time scale, so the bulk of the excited dye molecules ends up in B , i.e., in the lowest vibrational and rotational states of the first electronic excited manifold. Laser action occurs through amplification (by stimulated emission) of naturally occurring, spontaneous emission from level B back to the ground electronic manifold. Once more, the most probable transition is to an excited vibrational state, a, in So rather than to the ground vibrational state A . Thermal equilibration occurs rapidly from these laser-terminus a states, and the dye molecule population in the So manifold maintains itself in a Boltzmann distribution. i.e., with only the lowest levels around A significantly populated. This fast thermal equilibration in the ground electronic manifold means that the molecular terminal states of the laser, the a states. will always be emptied. This rapid emptying of the terminal states means that population inversion between a-B levels is achieved relatively easily; laser threshold for

GOW-MAC

Introducing the Second-Generation, Low Cost, High Performance Flame Ionization Detector Gas Chromatograph

Prevent the Needless Downfall of a Good Gas Chromatograph

With GOW-MAC'S new model 69-750 we think we have achieved the highest sensitivity at the lowest instrument cost. GOW-MAC has designed the 69-750 gas chromatograph equipped with a Flame ionization Detector to release the more expensive research instruments from routine analysis. This is a rugged, economical instrument, utilizing the high sensitivity of the flame ionization detector. It has been thoroughly use-tested and is a perfect companion to the sophisticated instruments of the research laboratory as well as being eminently suitable for routine anaiysis in the Quality Control Laboratory. Features are o n - c o l u m n inlet system; oven temperature to 300°C with proportional control; thermally isolated detector, sensitive to 1 x g/sec hydrocarbon; solid state electrometer. Send for brochure.

The GOW-MAC Gas Leak Detector will find leaks in your chromatographic system and maintain the accuracy of your gas chromatograph. It is cordless, portable and has a selfcontained rechargeable battery. Can also be iine operated. The probe enables you to check hard to reach leaks. Sensitivity cc at atmosphere/sec helium. Will detect as little as 10 ppm helium or hydrogen in static systems. Since the GOW-MAC Gas Leak Detector is specific for gas chromatography, it belongs in your laboratory. CIRCLE 8 8

ON

READER SERVICE CARD


High Purity Gas Analysis In measuring gas mixtures, thermal conductivity has demonsirated outstanding advantages in accuracy, speed and simplicity. This also provides such measurement at /ow cost. On a custom basis, GOW-MAC builds high purity analyzers, modei 50-100. They provide continuous recording and control. The gas fiow system is optimized to the mixture to be measured. For example, these units can span full scale 0-0.25% air in argon; 0-500 ppm air in hydrogen or helium; 0-0.1% H2 in air, argon, nitrogen or oxygen. These high purity analyzers have also been produced for ethylene oxide, halogenated hydrocarbons, carbon dioxide and methyl bromide. If you are interested in such applications, we will send you a questionnaire and propose a quotation. The heart of such a system is the GOW-MAC 24-100 Temperature Regulated Cell. This system includes a symmetrical, high-heat capacity oven, a power proportioning solid state, all silicon temperature controller with a thermistor probe and heat equalizers for both sample and reference gases. When matched with a suitable gas sampling system, pressure and flow regulators, sensitive recorder and accurate calibration . . . specifically to the binary mixture , , . you have a high purity gas analyzer. You may wish to construct your own system. For details, both on high purity analyzers and temperature regulated cells, send for information.

GOW-MAC INSTRUMENT CO

100 Kings Road, Madison, New Jersey 07940 Telephone: (201) 377-3450

Please send us information on the following:

0 69-750 Standard FID Gas Chromatograph 0 SB-GA Thermal Conductivity Gas Analyzers 0 SB-21 Gas Leak Detector Name Company

~.

Address City-

State

Zp i -.


GowDMAC INSTRUMENT CO.

100 Kings Road

Madison, N. J. 07940 U.S.A. Telephone 2011377-3450 Shannon Free Airport, Shannon Ireland


33A


rhodamine 6G can be achieved with fractional excited-state populations n*/n 0.1%. H

Dye Laser Threshold

Looking for an integrated GCIMS system with a high standard of performance? Gnom has 16,000 miles of proof. The MAT 111 “Gnom” went from the production line onto a v a n . Then it toured the U.S.and Canada. In temperatures from below freezing to 95‘F. Analyzing 800 samples without a malfunction-delivering good, usable spectra every time. And the compact MAT 111 has more t h a n reliable performance going for it. It’s integrated-using a Varian gas chromatograph and mass spectrometer, both designed especially for CCIMS, with the magnetic sector MS giving you constant resolution and sensitivity throughout the entire 1-1000 mass range (linear or exponential). It‘s not just a CC hooked onto any mass spectrometer. With both GC and MS made by Varian, you get single-source responsibility for the entire instrument (including data system if y o u want one). B u t the most amazing thing is operating the MAT 111 for yourself and seeing how easy it is to get outstanding results. You can see it a t our laboratories or a t one of the GCiMS seminars planned this coming year. For more information or an appointment to see the MAT 111, phone our Product Manager, Helmut Raddatz at 415-326-4000, Ext. 3045. Or write to him a t : Varian MAT, 611 Hansen Way, Palo Alto, California 94303. He’ll also see t h a t you get a schedule of forthcoming seminars.

@ varian mat


34A


‘ I

1

I

We observed t h a t laser threshold occurs when a high-enough population inversion is reached for photon gain from stimulated emission t o exceed photon losses a t the potential laser wavelength. I n addition t o extrinsic losses (imperfect mirror reflectivity, etc.) , loss mechanisms intrinsic to the dye are crucial for laser operation and ultimately determine the suitability of a dye for laser use. These intrinsic loss mechanisms include low quantum yield (nonradiative deexcitation from the excited singlet state, either by internal conversion or intersystem crossing) and self-absorption by the dye itself of fluorescent emission a t the laser wavelength. Intersystem crossing to the triplet manifold is particularly deleterious because of the long lifetime TT of this metastable state. Dye molecules continue to accumulate in T I where they are not only lost to the laser emission process, butf a r worse-where they can absorb photons from the potential laser mode by being promoted to excited triplet states in T 2 . Triplet-triplet absorption is a severe enough problem in general to limit dye laser operation to the much more restricted class of “low triplet yield dyes” (small k S T j ,and/or to fast systems where excitation peaks in times of the order of IZRT-l, or to systems with “triplet quencher” additives that reduce TT to the order of kS,-l. F a s t excitation generally means pumping by a Q-spoiled laser, or exotic fast flashlamp. Clearly, continuous wave (CUT) or long-pulse operation is feasible only when the triplet state is quenched preferentially compared t o the excited singlet. Fortunately, triplet quenchers have been discovered for a considerable variety of dyes ( 2 j , and intensive research continues t o expand the list of dyes for which triplet quenchers are available. The growth of intensity I of a laser beam as it propagates through the excited dye can be described by a Beer’s law gain equation of the form

NEW "SGA" CATALOG

10%"

TWO CATALOGS COMBINED INTO ONE! Over 30,000 stock items are listed in this new comprehensive laboratory supply catalog. It's simple to use, as all numbers are in sequence and all page headings are in alphabetical order. Thousands of illustrations are included, along with many helpful tables and charts.

Like our previous catalog 69, this new edition contains two separate volumes bound together for your convenience. The 976-page Genera4 Section lists thousands of modern scientific instruments, apparatus, appliances and general laboratory glassware and supplies. The 284page Inter-loint Section covers our entire line of interchangeable glassware. A 64page cross-referenced index separates the two sections. General information is given in the 8-page preface.

f

To receive our new catalog (mailed without charge), please write to us on your official letterhead.

Branches:

36A

Boston M ~

.

~

~Danbury . Conn.

Elk Grove Village Fullerton Philadelphia 111. Calif. Penna. CIRCLE 190 ON READER SERVICE CARD


Silver Spring Md.

Syracuse N. Y.


_ % --G I The gain coefficient G is given by (8)

G = n"uQ(A) - no~,y(h)nTaT(A)

-

(2)

where no,nit,and nT are the (number) densities of singlet groundstate, singlet excited-state, and triplet-state molecules, respectively; as(h) and (TT(A) are the (molecular) singlet-singlet and triplet-triplet absorption cross sections; and r is the average extrinsic loss per unit length of dye, incorporating all intracavity losses except the dye absorbances. The average intracavity loss owing to mirror reflectivities R1 and RP, for example, is given by r = --In(& X R 2 ) / 2 1, where 1 is the length of the dye cell. The stimulated emission cross section ug(A) can be shown ( % 4 ) to be uQ( A )

= A4F( A ) /8rrr,y~?7~ (3)

where rNis the spontaneous singlet decay time, A and c are the wavelength and velocity of light in vacuum, 7 is the index of refraction of the solution, and F ( h ) is the fluorescence line shape normalized so

1'

F (A) d~ equals the quantum

yield 4. The total dye concentration n is equal t o the sum of no,n", and nT. Equation 2 can thus be rewritten as

+

G = nH(ug us) nT(aT- us) - nus - r

(4)

Since the cross sections can be measured directly or calculated from measurable quantities, G is a function of four independent variables: h (through the wavelength-dependent cross sections), n", n T , and r and n* and nT can vary both spatially and temporally following the excitation intensity ( 5 ) . If the intracavity laser intensity I is high, n" can also depend on I through stimulated emission and absorption terms, and Equations 1 and 4 must be solved simultaneously. Great simplification is effected, and the essential physics is displayed if n" is assumed spatially uniform. This approximation corresponds experimentally to a cylin-

flow does a)our ooohnetrtic

dispensing equipment stack up against ours Whether you're using a semi-automatic pipette or dispensing liquids manual -compare your method to ours. THE GRUMMAN ADP-30 DT AUTOMATIC DIGITAL PIPETTE

different fluids simulhas a calibrated delivery capacity from 0.02 ml to 21 ml. accepts a wide range of cans, bottles, ampoules or vials including th FLEAKER (Reg CorningTM) built-in synchronized conveyor tray has "no vial/no fill" e number of vials to be atically after filling the last sed to fluids are made of selected teflon (Reg DuPontTM) assure continuous smooth control through a least count down to 0.02 titrating. If you're still not convinced the Grumman ADP-30 has more unique cost an time saving advantages than your present method, ask for a demonstration Call (516) 575-3282 or 3888 collect.

r

[INSTRUMENT SYSTEMS PROOUCTS 1



37A


drical dye cell uniformly pumped by a parallel flashlamp imaged in the cell and operated near threshold where I is low enough so stimulated processes do not change nn and I significantly over the length of the cell. With this spatially uniform gain coefficient, i t is not necessary to integrate laser-beam intensity over an intracavity round trip. Laser threshold, in particular, is defined by G = 0, and the threshold inversion is trivially derived from Equation 4. (n*/n)G=O=

(a,

and other laboratory applications

..

Choose the perfect companion instrument to your electrophoresis equipment.

0

0

0 0 0

0 0

Current and Voltage Regulated Burnout Protection against load interruption, short circuits and overloads Solid State Circuitry Polarity reversing switch Separate Volt and Milliammeter Low ripple Low-Hi Voltage Setting Capable of powering more than one electrophoresis cel I simultaneously

+

US US)

-

+r/n (UT

- US)nT/n*

(5)

Equation 5 is to be evaluated a t the wavelength where laser emission occurs. This will occur a t some wavelength greater than that of the singlet-singlet absorption maximum, where generally u s ( h ) > T ~ as , a function of lasing wavelength X (nm) and normalized extrinsic loss r/n (cm*/dye molecule) Iso-loss contours are intersections of constant-loss planes with t h e zero-gain surface: t h e dotted line representing locus of minima of these intersections i s critical threshold inversion f o r self. tuning. Figure taken from Peterson et al. (3)

CIRCLE

38A

23 ON READER SERVICE CARD

ANALYTICAL CHEMISTRY, VOL. 1.4, NO. 6, MAY 1972

9YEARSAGO WE WERE THINKING ABOUT YOU TODAY

AA5modular

Nine years ago the model was the

AA-3. Today we make the AA-5. In between was (you guessed it) the AA4.All three are completely modular. What this means today is that a model

AA-3 can be updated to the state-ofthe-art A A - 5 . Easily and inexpensively. All that has to be done is to replace modules where substantial improvements have been made. For example, the AA-3 amplifier could not read out in concentration, nor did it have an auto-zero or scale expansion. Replace it with the AA-5 amplifier and

you have the new capabilities at a fraction of the cost of a new AA. , be Today's Instrument, the A A - ~ will just as easy to update in the future. But what about today? Modularity provides more than easy updating. It provides flexibility. Flexibility that's enhanced by an open sample area and an optical rail. A n d by the sampling accessories and techniques that can be used. We can show YOU how a 4 - f O O t furnace has been put in the AA-5. Or how atomic fluorescence is readily measured. CIRCLE 207

There's more to tell. But the main thing is that the modular AA-5 is an ideal system for either exacting research needs, Or for routine bulk analyses. Today, or tomorrow.

varian techtron

@

Walnut Creek, California USA Malton, ontario, canada z u g , Switzerland North Springvale, Victoria, Australia

O N READER SERVICE CARD ANALYTICAL CHEMISTRY, VOL. 44, NO. 6, MAY 1972

39A

The new DamonilEC PR-6000 embodies design and operating innovations never before available in a low cost portable refrigerated centrifuge Advanced solid-state electronics and a stylish yet functional control panel point up the PR-6000 as tomorrows most promising laboratory trend setter Compactness versatilityand ease of operation make PR-6000 the ideal choice forthe clinical and general purpose laboratory A new windshielded 6-liter head (optional) reduces large volume blood separation time by as much as 60%-a plus for blood banks And with the CF-6 Continuous Flow Zonal Rotor the PR-6000 provides ultra-centrifuge research capabilities at only 6 000 RPM New DamonilEC PR-6000 features include a flexible drive shaft that eliminates the need for critical balancing safety cover lock that won't release until the head is completely

stopped (front panel indicator tells you when)

IEC PR-6000: variable electric brake for deceleration suited to CENTRIFUGATION % ' , " , " R ~ % ~ d i c a t o r light warns of brush replacement need 20 to 50 hours before necessary ENTERS A NEW range timer for precise short runs to 15 minGENERATION. Utesdual as well as timed long runs to 105 minutes

c@

precise temperature control that maintains 0°C at maximum speed or down to -10°C at lower speeds Of course the PR-6000 includes all standard IEC features-automatic acceleration electric tachometer start up surge protection counter balanced cover And it will accept all accessories from former IEC Portable Refrigerated Centrifuges To learn more about PR-6000 call or write DamonilEC Division 300 Second Avenue Needham Heights, Massachusetts 02194 (617) 444-6700 Or see your local IEC dealer

DAMON/IEC DIVISION CIRCLE 49 ON READER SERVICE CARD

40A


Report for Analytical Chemists I


ANALYTICAL CHEMISTRY, VOL. 44, NO. 6. h l A Y 1972

41 A


I . T. Baker l i q u i d scint i l l a t i o n p r o d u c t s are “use-tested” b y l i q u i d sci nt iI lat ion spectrometry . Lot-to-lot uniformity is determined by calibration against NBS radiochemical standards. Key solvents in liquid scintillation grade include: IP-Dioxane and Toluene

Also available are important solutes, such as: 2,5-Diphenyloxazole (PPO) 4,4’-Diphenylstilbene (DPS) 2-U-Naphthyl)5-phenyloxazole (CY-NPO) 2,2‘-p-Phenylenebis(5-phenyloxazole) (POPOP) p-Terphenyl (p-TP) For these p r o d u c t s a n d m o r e than 5,000 o t h e r chemicals, see o u r n e w Catalog 700 . . . the most complete guide to materials for critical laboratory ap p I i ca ti ons. For the products he needs most o f t e n . . . the professional chooses 1. T. Baker.

1. T.Baker Chemical Co. 222 Red School Lane C-6 Phillipsburg, N.J.08865

Output wavelength (nm) Figure 5. Tuning range of flashlamp-pumped rhodamine 6G laser with four intracavity prisms Flashlamp input, 100 J; laser output energy, > / a J/pulse at 590 nm.

straining possible laser action to this specified (low-loss, retrorefleeted) wavelength is equivalent to choosing a specific, constant-wavelength plane in Figure 4. The value of the extrinsic loss a t the specified wavelength is still arbitrary, depending upon losses introduced by the dispersive element, mirror reflectivity, etc. Laser threshold in this externally tuned configuration occurs a t the intersection of the constant, “laser wavelength” plane with that iso-loss contour in the zero-gain surface whose value is the value of r/n a t the laser wavelength. This configuration with a dispersive loss in the cavity is denoted “externally tuned,” since threshold is no longer constrained to appear on the locus of iso-loss minima. Tuning is accomplished simply by rotating the grating or the cavity mirror adjacent to the prism, so a different wavelength will become the retroreflected, low-loss wavelength for the dispersive cavity. Figure 5 shows the tuning range of a prism-tuned, flashlamp-pumped rhodamine 6G dye laser ( 7 ) . Introduction of a dispersive element in the cavity not only pro-


42A

Figure taken from Strome

and Webb (7)


vides for tuning but also narrows the spectral width of the laser. The spectral width ( F W H M ) of a n untuned (self-tuned) laser, operated xell above threshold, is typically 30-40 A. With four prisms in the cavity, the spectral width of the same laser operated under the same conditions fell to less than 2 b ( 7 ) . Further spectral narrowing to 0.01 A is possible if a titled Fabry-Perot etalon or Lyot filter is introduced into a cavity that is already coarsetuned (8, 9 ) . This spectral narrowing is remarkably efficient; output-power reductions of less than a factor of 2 are reported with coarse tuning and of only a factor of 4 with a Fabry-Perot filter in the cavity. Dye Lasers: State of the Art and Intrinsic Limitations

K e have noted that laser emission from a given dye can be tuned over seveml hundreds of angstroms. Solvent and pH changes may induce shifts (of several hundred angstroms) and/or extend the tuning range for a given dye substantially. Extreme examples of this pH-dependent tuning-range extension are

Tri-Carl> Systems by Pacl~ard The world’s Ieder ii i Iiquid sciiiti IIcltion

W o r l d Wide S a l e s and S e r v i c e

PACKARD INSTRUMENT COMPANY, INC.

Subsidiary of AMBAC Industries, Inc. CIRCLE 159

ON

2200 Warrenville Rd.

Downers Grove, 111.60515

READER SERVICE CARD


0

43A

Now. Get an analysis like this-in minutesby pushing a button.

all are automatically analyzed in minutes with the QantaIMetrix energy-dispersive X-ray Materials Analysis System. It’s this simple: 1. Load the sample changer (up to 12 samples: liquid, pressed pellet, or solid) 2. Push a button to standardize the unit 3. And push a single “%” button. The system then automatically analyzes each sample: it irradiates the&sample;detects all elements simultaneously; calculates total intensity; applies interelement corrections; and prints out element names and percent concentrations. A complete, 12-sample, 10-element analysis takes less than an hour.

preparation because the system uses non-focusing optics. And there are no crystals or goniometers to get out of alignment. The key to this performance is in the use of a powerful central processor as an integral part of the operating console, and the use of pre-packaged, pushbutton-controlled software. Everything is done for you. So you’re free to concentrate on less routine work. What‘s more, the Qanta/Metrix system is modular: you get full automation plus complete flexibility for manual or semiautomatic special procedure A complete system consists of a solid-state Si(Li) detector: the central processor; a low-power, air-


44A


cooled x-ray generator; and the sample changer-all housed in two compact consoles featuring light weight and low power use. A teletypewriter is also provided. Qanta/Metrix systems can be tailored to your analytical requirements and are priced from $25,000 to $50,000. A wide variety of lease, purchase, and rental plans are available. For a complete brochure and detailed applications data, call or write: Qanta/Metrix Corporation, 120 Industrial Way, San Carlos, CA 94070. Phone: (415) 592-7770.

QANTA/METRIX TOTAL PUSHBUTTON OPERATION FOR ELEMENTAL ANA LYSIS


umbelliferone and 4-methylumbelliferone (10, 1 1 ) , where each dye can be tuned over 1500 A in critically adjusted, slightly acidic solutions excited by a fast (2-3-nsec rise time) , pulsed Ir;, laser. These broad tuning ranges represent laser emission from excited neutral and protonated exciplex states of the dye that are simultaneously present in the critically adjusted solution. The spectral range of laser emission can be extended further by substituting a different fluorescent dye (and possibly different mirrors and excitation sources peaked a t different wavelengths to match the new dye, as well). Pulsed laser emission from 3410 to 1168 A has been reported from a variety of organic dyes ( 1 2 - 1 5 ) . Generally speaking, the near-infrared dyes have been excited with Q-spoiled lasers, either ruby or neodymium. Niyazoe and 1Iaeda ( 1 5 ) report overlapping tuning ranges from 19 polymethine dyes that cover the range continuously from 7100 to 10,600 A. Little is reported about the stability of these infrared dyes, but rapid photodegradation of the dye molecules in solution is to be anticipated. Lack of dye stability can 1)robably be expected to limit any great extension of the tuning range toward longer wavelengths. The stability problem with infrared dyes is intrinsic, in that longer wavelength emission implies closer energy-level spacing and hence a longer conjugated chain to give a larger “free-electron box.” These larger molecules with correspondingly more bonds are inherently less stable. Tunable infrared radiation can he obtained further into the infrared, however, by mixing the output of a tunable dye laser with another intense radiation source in a nonlinear crystal (oriented for phase matching a t the difference frequency) and utilizing the difference frequency. Dewey and Hocker (16) have demonstrated the feasibility of this scheme, in the 3-4-p region. They split the output of a Q-spoiled ruby laser, used one part to pump a tunable D T T C iodide dye laser, and then combined the dye-laser output with the second part of the ruby-laser

output in a LiNbOs crystal t o get approximately 6 kW of tunable infrared power. This scheme should extend tunable sources as far into the infrared as transmission characteristics of the nonlinear crystals permit. This is about 4.5 p for LiNb03, but Dewey and Hocker believe that proustite (Ag3AsS3) and pyrargyrite (Ag3SbS3) may extend the range to 13 p. They also speculate t h a t the second harmonic of ruby (0.347 p ) and continuously tunable dye lasers operating from 0.4 to 0.7 p should cover the 0.7-2-p region. Visible and near-ultraviolet dye lasers are pumped by ultravioletrich fast flashlamps and shortpulse lasers (S, or Q-spoiled, frequency-doubled neodymium and r u b y ) . A commercially available, Si laser-pumped dye laser provides continuous coverage from 3600 to 6500 A with nine interchangeable dye solutions. Peak power in (repetitive) laser pulses is in the kilowatt range with nanosecond-range pulse durations. Fast flashlamp-pumped dye lasers cover essentially the same spectral range with peak powers over 10 k W and submicrosecond t o microsecond pulse duration. Output pulse energies exceeding a joule with peak powers over a megawatt have been achieved with xanthene dyes. Stability is generally not a problem with these dyes. Tunable power can be obtained further into the ultraviolet by frequency doubling the output of a dye laser. For example, Johnson and Swagel have frequency doubled a rhodamine B dye laser by use of a KDP crystal oriented for index matching ( 1 7 ) . They achieved a 3-K wide output a t 2950 A from a 160-A wide input a t 5900 A, which could be fine tuned by changing the index-matching orientation angle. A significant recent development is the cw dye laser. Following Snavely and Schafer’s work on oxygen-quenching of the rhodamine 6G triplet state ( 1 8 ) ,Peterson et al. developed a truly continuous rhodamine 6G laser t h a t was pumped with an argon ion laser ( 1 9 ) . Since then, tunable cw dye lasers using fluorescein, rhodamine 6G, and rhodamine B with triplet quench-

Send detdls on Cirbon Detrrmlnrtorr. Nema Company Addrail

Stlte---Zlp-

city

CIRCLE 50

ANALYTICAL CHEMISTRY, VOL. 44,

--

ON

READER SERVICE CARD

NO. 6, MAY 1972

” -

0

45A

Repolt for Analytical Chemists

4

I

i I

i

is the new look inunbreakable Nalgene"Burets 'hese burets do everything glass does . . except break. Now you an have an individuallycalirated transparent buret iat will not break in normal se. Only a slight meniscus lakes readings easier, more ccurate. The crystal clear crylic body, tip, and leakroof stopcock are unaf?cted by all t h e usual tiants. The Teflon TFE plug ever needs lubrication, is a leasure to turn. Stopcock ssembly easily removed for traight-through cleaning. learly the precision burets )r industrial labs, schools, Id in the field. Sizes: 10, 5, 50, 100 ml. (Cat. No. 550). Order from your Lab upply Dealer. Ask him for ur Catalog, or write Dept. 317,Nalgene Labware Divion, Rochester, N. Y. 14602.

ers have been reported ( d 0 , Z I ) t h a t span the spectrum from 5200 t o 6600 A. Tuned output powers exceed 100 mW, and spectral bandwidths can be less than 0.01A. Thus far, the only continuous source bright enough t o pump the dyes to a threshold excited-state population density is an argon ion laser focused in the dye solution. This has limited cw laser dyes to efficient xanthene-type dyes t h a t ahsorb the primary 4880 and 5145-A argon laser lines; the Stokes-shifted spectral output range is correspondingly limited. Probably the only real limitation of the dye laser is t h a t it cannot be Q-spoiled to give tremendously high peak Dowers. This limitation is in&si; to dyes because their high spontaneous fluorescence rates preclude any integrated pumping up of excited-state population for times greater than their spontaneous lifetimes ( a few nanoseconds). Compared with ruby and neodymium with their millisecond lifetimes during which excited-state populations can be pumped up, dyes obviously do not provide the energy-storage capacity for extremely energetic pulses. For pumping times longer than a few nanoseconds, dye laser output will be in equilibrium with pumping intensity. For the scientist in need of tunable, coherent, monochromatic, collimated light a t cw power levels approaching a watt or with pulsed energies measured in joules and powers in megawatts, the organic dye laser should prove invaluable. The potential impact of dye lasers is further emphasized by their inherent simplicity (compared t o tunable parametric oscillators and even to many fixed-frequency lasers) and the low cost of the laser-active material. References

(1) Hans Kuhn, Fortsch. Chem. Org. Naturst., XVI, 170 (1958); XVII. 404 (IRKRI ,. . ..,.

B. MarlinR, D.W. Gregg, and L. Wood, Appl. Phys. Lett., 17,527 (1970). (3) 0. G. Peterson, J. P. Webb, W. C. McColgin, and J. H. Eherly, J . Appl. Phvs.. 42,1917 (1971). (4) B. B. Snavely, Proc. IEEE, 57, 1374 (2) J.

(1969). , ~ ~ ~ ~ , (5) S. A. Tuccio and F. Strome, Appl. Opt., 11,64 (1972). (6)J. P. Webb, W. C. Mecolain, 0. G. CIRCLE 146 ON READER SERVICE CARD

46A


Peterson, D. L. Stockman, and J. H. Eberly, J . Chem. Phys., 53, 4227 (1970). (7) F. C. Strome, Jr., and J. P. Webb, A w l . Opt., IO, 1348 (1971). (8) D. J. Bradley, A. J. F. Durrant, G.M. Gale, M. Moore, and P. D. Smith, IEEE J . Quant. Electron., 4, 707 f,. l. W >. __,

(9) H. Walther and J. L. Hull, Appl. Phys. Lett.. 17,239 (1970). (10) C. V. Shank, A. Dienes, A. M.

Trozzolo, and J. A. Meyer, ibid., 16,

405 (1970). (11) A. Dienes, C. V. Shank, and A. M. Trozzolo, zbzd., 17, 189 (1970). (12) H. W.Furomoto and H. L. Ceccon, IEEE J . Quant. Electron., 6, 262

i~-".-,. iwm (13) L. D. Derkacheva, A. I. Krymova, A. F. Vompe, and I. I. Levkoev, Opt. Spectrosc., 25,723 (1968). (14) L. D. Derkacheva, A. I. Krymova, V. I. Malyshev, and A. S. Markin, JETP Lett., 12. 468 (1968). (15) Y. Miyasoe and M. Maeda, Appl. Phws. Lett.., 12., 206 (1MR). (l6),C. F. Dewey and L. 0. Hocker, zbtd., 18, 58 (1971). (17) F. M. Johnson and M. W. Swagel, Avvl. Ovt.. 10. 1624 (1971). (l8fB. B. Snavely and F. P. Schifer, Phws. Lett., 28A, 728 (1969). (19) 0.G. Peterson, S. A. Tuccio, and B. B. Snavely, Appl. Phys. Lett., 17, 245 (1970). (20) S. A. Tuccio, 1971 IEEElOSA Conf. ~

~

on Laser Eng. and Appl., IEEE J . Quant. Electron., 7,12 (1971). (21) M. Hercber and H. A. Pike, 1971 IEEE/OSA Conf. on Laser Eng. and Appl., ibid., 13 (1971).

. * i n *

J. Pierce Webb is an experimental physicist in the Solid State and Mo-

lecular Physics Laboratory a t the Research Laboratories of Eastman Kodak Co., Rochester, N Y . H e has been engaged in organic dye laser research since joining Kodak in 1968. Dr. W e b b received his BA, summa cum laude in physics, f r o m Harvard College 1967 and earned his P h D in 1968 from Stanford University for critical opalescent lightscattering measurements in He8. H e is a member of the American Physical Society and Sigma Xi.

Tunable organic dye lasers - ACS Publications - American Chemical

Recommend Documents