"job-iitted"
cable resists chemical attack!
The
right
cable
in the right
gives you α more efficient
place
power system. Costly outages
are prevented because
highly resistant to hazardous chemicals
is /ess
the right
and fumes. Service life is longer — maintenance
Most important, operating
cable
Electric offers you the services of two
who understands your industry9s
who knows cable fromP^to
to your nearest General
Department,
electrical problems and one
they can meet all your cable
4ζ . Together
to heavy power
from delicate instrument cables
Apparatus
is assured. To help you select
continuity
for every job, General
specialists —one
cables are
"job-fitted"
\ffljE)
requirements,
A telephone
mains
Electric office will start the ball
tt**jâ)
call
rolling.
General Electric Company, Schenectady 5, New York.
T Y P I C A L G A B L E S for tough chemical plant service G-E VARNISHED-CAMBRIC BRONZE INTERLOCKED
This cable is commonly used for overhead power distribution throughout the plant without the need for conduit. It can stand high ambient temperatures and overloads. The bronze armor offers high resistance to injurious chemicals. It is available for either high or low voltage power distribution.
G-E CORONOL-GEOPRENE
When it is desired to install a high-voltage power distribution cable or motor lead in conduit, this Coronol-Geoprene is recommended. This cable can also be buried directly in the ground. It is highly resistant to moisture and most chemicals. Available in either single- or 3-conductor form.
GENERAL
G-E VERSATOL-GEOPRENE
For low-voltage distribution and branch-circuit wiring in conduit to motors and controls, G-E Versatol-Geoprene is an excellent choice. This cable can also be buried directly in the ground. Versatol insulation is heat- and moisture-resistant. Available in 1-, 2-, and 3-conductor form, 600 volts.
G-E FLAMENOL
This cable is widely used for control and motor leads on chemical mixer, grinder, and agitator drives. Flamenol is chemically inert and is extremely resistant to acids, alcohol, alkalis, grease, and oil. Recommended for use on circuits up to and including 600 volts.
ELECTRIC 662-24C-132
