Ultrafiltration and Hyperfiltration in the Pulp and Paper Industry for By

May 27, 1981 - The development work with regard to application of DDS-RO(1) membrane filtration systems for treatment of effluents from the pulp and p...
0 downloads 6 Views 1MB Size
21 Ultrafiltration and Hyperfiltration in the Pulp and Paper Industry for By-Product Recovery and Energy Savings

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

PER H. CLAUSSEN Niro Atomizer, Inc., 9165 Rumsey Road, Columbia, MD 21045

The development work w i t h regard t o a p p l i c a t i o n of DDS-RO(1) membrane filtration systems f o r treatment of e f f l u e n t s from the pulp and paper i n d u s t r y s t a r t e d in Norway in the beginning of 1972. Both l a b and pilot trials were s u c c e s s f u l and a Norwegian patent (2) was granted f o r s e p a r a t i o n of l i g n o s u l f o n a t e from spent sulfite l i q u o r (SSL) by ultrafiltration ( U F ) . In 1974 a major Norwegian manufacturer of lignin products s t a r t e d r e g u l a r p r o d u c t i o n of U F - l i g n o s u l f o n a t e s . The p l a n t has been expanded s e v e r a l times and today the p r o d u c t i o n is some thousand tons per year of product. A c o o p e r a t i o n agreement was made in 1973 between DDS-RO and the F i n n i s h Pulp and Paper Research Institute w i t h the aim t o develop products and processes on the b a s i s o f membrane filtration of e f f l u e n t s from the pulp and paper i n d u s t r y . The coopera t i o n w i t h Dr. Kaj Forss' s e c t i o n a t FPPRI has been very s u c c e s s f u l . For i n s t a n c e , through an extensive development program UF has been found t o be a f e a s i b l e t o o l f o r the p r e p a r a t i o n of lignin f o r the Karatex (3) plywood binder. This adhesive, which is made from ultrafiltered spent sulfite l i q u o r (SSL) o r kraft b l a c k l i q u o r (KBL), can be used f o r partial replacement of the much more expensive petroleum based phenol-formaldehyde r e s i n i n plywood and other wooden boards. The Swedish Company EKA and DDS-RO have worked together on a 2-year l a r g e s c a l e pilot o p e r a t i o n in a Swedish k r a f t mill for c o l o r removal from c a u s t i c e x t r a c t i o n bleach e f f l u e n t by UF (4). The r e s u l t s of the program were s u c c e s s f u l both w i t h regard to c o l o r removal efficiency, reliability and membrane lifetime and the first full s c a l e installation will be made t h i s year in Japan. With the i n c r e a s i n g f u e l p r i c e s , it becomes more and more important t o f i n d energy efficient c o n c e n t r a t i o n methods f o r industrial e f f l u e n t s . H y p e r f i l t r a t i o n (HF).also c a l l e d r e v e r s e osmosis is in s e v e r a l cases the most f a v o r a b l e method. Toten S u l p h i t e Mill in Norway r e a l i z e d t h i s in 1976 when a 0097-6156/81/0154-0361$05.00/0 © 1981 American Chemical Society

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

362

SYNTHETIC MEMBRANES:

HF

AND

UF

USES

a demand f o r a d d i t i o n a l water removal c a p a c i t y occurred, and they i n s t a l l e d a HF-system. Over the years s u b s t a n t i a l f u e l savings have been made. So f a r t h i s paper has been d e a l i n g w i t h the past. The t a b l e below shows the s i t u a t i o n today w i t h regards to DDS-RO i n s t a l l a t i o n s i n the pulp and paper i n d u s t r y . At the end of 1980 about 30,000 f t . of membrane area of DDS make w i l l be i n o p e r a t i o n i n t h i s i n d u s t r y . By-product c a p a c i t y w i l l be 15,000-20,000 tons per year of product s o l i d s by UF. Water removal c a p a c i t y i s approximately 100,000 g a l l o n s per day.

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

2

2

Main Features of the Systems. The 450 f t . h o r i z o n t a l mounted module UF 35-42 and the 300 f t . v e r t i c a l module HF 40-28 are the key components of the described systems, shown i n f i g u r e 2 and 3. Both the UF and the HF systems are m u l t i s t a g e continuous p l a n t s according to the concept on f i g u r e 4. Process c o n t r o l concept i s simple but e f f i c i e n t and r e l i a b l e , w i t h thermostatic c o n t r o l of supply of steam or c o o l i n g water to the heat exchangers and f l o w / s o l i d s c o n c e n t r a t i o n c o n t r o l e i t h e r on b a s i s of i n - l i n e refractometer at the end of the system or r a t i o c o n t r o l between feed and concentrate flow. F i g u r e 5 i s showing a t y p i c a l U F - i n s t a l l a t i o n i n the pulp and paper i n d u s t r y at Iggesund K r a f t M i l l i n Sweden. Figure 6 i s showing the H F - i n s t a l l a t i o n at Toten S u l p h i t e m i l l i n Norway. Membranes of v a r i o u s polymer m a t e r i a l s are used i n the UF systems a l l o w i n g o p e r a t i n g temperatures up to 190°F and pH from 0 to 14, which i s f a v o r a b l e when o p e r a t i n g on p u l p i n g e f f l u e n t s that e i t h e r are i n the upper or the lower end of the pH-range and w i t h temperatures c l o s e to the l i m i t s f o r the system. The systems a l s o a l l o w c l e a n i n g w i t h strong a l k a l i n e or a c i d chemicals, a l s o oxydants as H 2 O 2 and NaOCl which i n some cases i s necessary to keep the membranes s u f f i c i e n t l y clean i n the long run. For HF c e l l u l o s e acetate membranes are used s e t t i n g l i m i t s f o r temperature, 85°F, as w e l l as f o r pH, 2.5 to 8.0. S t i l l with those l i m i t a t i o n s i t i s p o s s i b l e to keep the systems at an accept ably high performance l e v e l f o r extensive periods of time, when o p e r a t i n g on spent s u l p h i t e l i q u o r . A proper p r e f i l t r a t i o n of the l i q u i d s i s r e q u i r e d and i s mainly done i n a s e l f - c l e a n i n g r o t a r y drum f i l t e r w i t h a 25micron web. 2

A p p l i c a t i o n s , Experience. U l t r a f i l t r a t i o n of SSL. This processing has been going on on a r e g u l a r commercial b a s i s s i n c e 1974 f o r manufacture of l i g n o s u l f o n a t e products w i t h a l i g n o s u l f o n a t e content i n the 90%+ range ( 5 ) . Not only the l i g n o s u l f o n a t e content of the product i s of importance, o f t e n a l s o the molecular

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

21.

CLAUSSEN

UF and HF in the Pulp and Paper Industry

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

Yr. I n s t a l l e d 1974-1979 1976 1978 1978

Country Norway Norway N.America Canada

Product Lignosulfonates NH4-SSL Lignosulfonates Ca-SSL

Under C o n s t r u c t i o n 1980 UF 1980 UF 1980 UF

Finland Finland Japan

Kraft liquor Lignosulfonates Kraft bleach effluent

Larger P i l o t 1978 1980 1980

Sweden Italy Argentina

Kraft bleach e f f l u e n t Ca-SSL NSSC waste l i q u o r

Figure 1.

Figure 2.

System UF HF UF HF

Plants UF HF HF

DDS-Ro installations in the pulp and paper industry

2

The 450-ft horizontally mounted UF module UF 35-42

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

363

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

364

SYNTHETIC

MEMBRANES:

HF

AND U F

2

Figure 3. The 300-ft vertical HF module HF 40-28

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

USES

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

CLAUSSEN

UF and HF in the Pulp and Paper Industry

Figure 4. Continuous membrane filtration system

Figure 5. Typical UF installation at Iggesund Kraft Mill in Sweden

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

365

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

366

SYNTHETIC

MEMBRANES:

HF

AND

UF

USES

weight d i s t r i b u t i o n of the l i g n o s u l f o n a t e , F i g u r e 7, i s showing the molecular weight d i s t r i b u t i o n of the l i g n o s u l f o n a t e i n SSL and i n the two f r a c t i o n s from UF, the concentrate and the f i l t r a t e ( 6 ) . The l i g n o s u l f o n a t e s from UF are mainly used as dispersants. I t took a few years before the modules, the membranes, pretreatment and membrane c l e a n i n g procedures were s u f f i c i e n t l y developed, but today the UF systems operate as s t e a d i l y and r e l i a b l e as other u n i t o p e r a t i o n s i n t h i s i n d u s t r y . The process concept i s simple and energy e f f i c i e n t , the pumps are the only moving p a r t s . No chemicals r e q u i r e d f o r the o p e r a t i o n except f o r minor q u a n t i t i e s of harmless c l e a n i n g agents. Membrane c l e a n i n g frequency i s mainly once every one or two days. L i f e t i m e expectancy, based on l a t e s t experience i s one year

+. UF i s made on both fermented and unfermented SSL. On a Pekilo-fermented l i q u o r Kaj Forss et a l (6) found a 50% h i g h e r production c a p a c i t y f o r a UF system of a given s i z e and a given product composition compared w i t h UF of the unfermented l i q u o r . The d i a f i l t r a t i o n water requirement was 55% l e s s f o r the fermented l i q u o r . Further d e t a i l s from the above mentioned o p e r a t i o n s cannot be d i s c l o s e d as the i n v o l v e d companies, due to the competitive s i t u a t i o n , p r e f e r to give out as l i t t l e i n f o r m a t i o n as p o s s i b l e . UF of K r a f t Black L i q u o r . L i g n i n from k r a f t b l a c k l i q u o r has f o r years been used to a l i m i t e d extent as extender f o r b i n d e r s i n v a r i o u s board products. With the r a p i d l y i n c r e a s i n g p r i c e s and the o u t l o o k of i n s u f f i c i e n t s u p p l i e s of PF r e s i n i n the f u t u r e , there i s a growing i n t e r e s t f o r l i g n i n f o r such a p p l i c a t i o n s . An extensive development program i n F i n l a n d , conducted by Dr. Kaj F o r s s , has shown that UF i s a simple, e f f i c i e n t and i n e x pensive method f o r t a i l o r i n g a l i g n i n product f o r t h i s purpose. By s e l e c t i o n of the proper membrane and p r o c e s s i n g parameters, i t i s p o s s i b l e i n a simple way to get a product w i t h the content- of l i g n i n and molecular weight d i s t r i b u t i o n r e q u i r e d f o r an a c t i v e binder i n g r e d i e n t which combines c h e m i c a l l y w i t h PF r e s i n f o r plywood. So f a r , a 40% replacement of PF r e s i n has been made without change i n the p r o p e r t i e s of the plywood. S u c c e s s f u l u l t r a f i l t r a t i o n / d i a f i l t r a t i o n has been made on 15% TDS l i q u o r from pulp washers, as w e l l as 30% TDS l i q u o r from t a l l o i l soap skimming. I t appears from Figure 8, that f o r a l i g n i n product w i t h a l i g n i n content i n the 80-90% range, based on product s o l i d s , the p r o d u c t i o n c a p a c i t y of a system of a given s i z e i s almost the same i n the two cases, but the 30% l i q u o r r e q u i r e s more water to get to the same l i g n i n content.

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

CLAUSSEN

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

21.

UF and HF in the Pulp and Paper Industry

367

Figure 6. HF installation at Toten Sulfite Mill in Norway

Figure 7.

Molecular-weight distribution of lignin in SSL and UF concentrate and filtrate

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

368

SYNTHETIC

MEMBRANES:

HF

AND

UF

USES

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

The f i r s t i n d u s t r i a l s c a l e i n s t a l l a t i o n w i l l come on stream towards the end of t h i s year i n F i n l a n d . H y p e r f i l t r a t i o n - P r e c o n c e n t r a t i o n of SSL. P r e c o n c e n t r a t i o n of SSL has been going on s i n c e 1976 a t Toten S u l p h i t e M i l l i n Norway and s i n c e 1978 at Reed's L i g n o s o l P l a n t i n Quebec, Canada. This method of c o n c e n t r a t i n g weak l i q u o r s i n combination w i t h evaporation i s becoming more and more a t t r a c t i v e w i t h the rapid increasing fuel prices. F i g u r e 9 showing energy requirement f o r v a r i o u s evaporator systems compared w i t h h y p e r f i l t r a t i o n , i n d i c a t e s c l e a r l y the advantage of water removal by h y p e r f i l t r a t i o n . F i g u r e 10 i s showing the energy savings that can be achieved by combining HF w i t h an e x i s t i n g evaporator system f o r SSL at a given s i t u a t i o n . By i n t e g r a t i o n of HF, energy input can be reduced by about 50% which should more than pay f o r the HF i n s t a l l a t i o n ; and, at the same time, r e l i e v e the steam b o i l e r or make more steam f o r other operations a v a i l a b l e . For incremental increases i n water removal c a p a c i t y , HF i s , i n most cases, the f a v o r a b l e o p e r a t i o n , due to the energy e f f i c i e n c y and the p o s s i b i l i t y of adding modules stepwise according to the i n c r e a s i n g demand f o r c a p a c i t y . T h i s f a c t has been taken advantage of at Toten and Reed. F i g u r e 11 i s showing some of the e s s e n t i a l f e a t u r e s from those two HF p l a n t s . Both p l a n t s a r e using CA-membranes and d e s p i t e that pH i s on the lower s i d e of the acceptable pH-range, at Toten o c c a s i o n n a l l y below pH2 on average, membrane l i f e t i m e of one year + i s experienced. There have been some f o u l i n g problems i n the systems caused by p i t c h - c o n t a i n i n g small f i b e r s and calcium s u l f i t e . Improved pretreatment and membrane c l e a n i n g procedures are the keys to the b e t t e r performance of the systems. Power consumption f o r the systems i s i n the range 3.5-4.5 Kwh per 1,000 l b s . of water removal. Membrane c l e a n i n g frequency has been 2-6 times a week f o r the two systems. Composition of f i l t r a t e i s not much d i f f e r e n t from that of an evaporator condensate. The U l t r a s e p Color Removal Process f o r C a u s t i c E x t r a c t i o n Bleach E f f l u e n t . An extensive l a r g e s c a l e p i l o t p l a n t program was c a r r i e d out by the Swedish company, EKA, at Iggesund K r a f t M i l l i n Sweden, using a f o u r - s t a g e , continuous DDS-RO u l t r a f i l t r a t i o n system f o r t h i s a p p l i c a t i o n . The system has been i n continuous o p e r a t i o n f o r about two years, s e p a r a t i n g 10% of the t o t a l c a u s t i c e x t r a c t i o n e f f l u e n t , approximately 100 GPM, i n two f r a c t i o n s , 4 GPM of concentrate c o n t a i n i n g 90% of the c o l o r and 96 GPM c o n t a i n i n g 10% of the color.

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

CLAUSSEN

Q3 ^ ttb§ o < ^ tt(L I o < J

CC CO

UF and HF in the Pulp and Paper Industry

C

0

A

N

D

0

U

C

N

T

R

E

S

T

0

F

NA.-LIGNIN IN PRODUCT, PRODUCT CAPACITY DIAFILTRATION WATER REQUIREMENT DURING THE SEPARATION. E

0

-.rr

£ \ i £ o w

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

N

F

T

M

E

.W •

INITIAL TDS 15%

40

%

369

50

PRECIPITABLE

LIGNIN

60

70

OF PR00UCT

80

SOLIDS

Figure 8. UF of KBL. Content of NA-lignin in product, product capacity, and diafiltration water requirement during the course of the separation.

E n e r g y - E f f i c i e n t C o n c e n t r a t i o n by HF (RO) Common energy

requirements

System

f o r e v a p o r a t o r s and HY

B t u p e r 1,000 l b s , o f water removal

1 e f f e c t w i t h vapor r e c o m p r e s s i o n 6 stage m u l t i p l e e f f e c t evaporator 5 stage m u l t i p l e e f f e c t evaporator 4 stage m u l t i p l e e f f e c t evaporator 3 stage m u l t i p l e e f f e c t evaporator Hyperfiltration

Figure 9.

systems:

50,000 215,000 270,000 345,000 430,000 15,000

Energy efficient concentration by HF (RO)

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

370

SYNTHETIC

MEMBRANES:

HF AND U F

USES

4 STAGE ME EVAPORATION A COMPARED WITH COMBINATION OF 4 STAGE ME EVAPORATION AND HYPERFILTRATION B ENERGY 56

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

A.

SSL 200,000 10% TDS

MILL.

BTU/HR

4 STAGE EVAPORATOR ME

LbS/HR.

CONCENTRATE 36,400 L B S / H R 5 5 % TDS

^EVAPORATION 163,600

LbS/HR

ENERGY

ENERGY I

B.

SSL ?00.000 LBS/HR. >0% T D S

I MILL

HYPER FILTRATION

BTU/HR

110,000 L B S / H R 18 2 % TDS

*

3 6 , 4 0 0 L B S / HR. 5 5 % TDS

EVAPORATION

FILTRATE 90.000

^CONCENTRATE

4 STAGE EVAPORATOR ME

73.600

L B S . / HR

LBS/HR

Figure 10. Energy requirement for water removal. Four-stage ME evaporation, A, compared with a combination of the four-stage ME evaporation and HF, B.

Features I n s t a l l a t i o n year S i z e s q . f t . membrane a r e a Configuration Product % TDS f e e d % TDS c o n c e n t r a t e Maximum feed r a t e GPM Max f i l t r a t i o n r a t e GPM Avg. f i l t r a t i o n r a t e a t max. f e e d Nominal power consumption approx. Kw. Nominal power concumption Kwh p e r 1000 l b s . f i l t r a t e No.of membrane r e p l a c e m e n t s

Toten

Reed

1976 4215 4 stage cont. N H 4 - S S L pH 2-2.5 6-10 12 88 44

1978 4817 4 stage cont. Ca-SSL pH 3-3.5 10 - 12 18 132 44

15

13

75

90

3.4 3

4.0 1

Figure 11. Features of the HF plants at Totel and Reed as of August 15, 1980

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

21.

CLAUSSEN

UF and

HF

in the Pulp and

Paper Industry

371

PRE-BLEACHED PULP

6000 TT? Effluent 40 tons Total Solids Total Chloride 7 tons 70 tons Color Pt 12 tons COD 4 tons BOD 3

Concentrate 250 m Solids 18 tons Chloride 1 ton Color Pt 63 tons COD 8 tons BOD 2 tons 3

5750 m 22 tons (12 tons org.) (10 tons NaCl) 6 tons Chloride 7 tons Color Pt 4 tons COD 2 tons BOO

Permeate Solids

Figure 12.

Ultrasep system for color removal. Materials balance for 600 tons of kraft pulp.

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.

SYNTHETIC MEMBRANES: HF AND

Downloaded by UNIV OF CALIFORNIA SAN DIEGO on June 2, 2015 | http://pubs.acs.org Publication Date: May 27, 1981 | doi: 10.1021/bk-1981-0154.ch021

372

dustry.

fully,

UF USES

F i g u r e 12 i s showing the d i s t r i b u t i o n of other e s s e n t i a l substance; f o r i n s t a n c e , BOD, COD, c h l o r i d e and TDS i n the two fractions. The o p e r a t i o n ran smoothly w i t h few major problems. Membrane c l e a n i n g frequency was, on average, once every three weeks. D i f f e r e n t membranes were used; the l a s t set was i n continuous o p e r a t i o n f o r more than 8,000 hours without s i g n i f i c a n t change i n performance. This process i s found to be competitive to e x i s t i n g c o l o r removal processes, both w i t h regard to economy and c o l o r removal efficiency. To which degree i t i s going to be u t i l i z e d i s depending on what k i n d of r e g u l a t i o n s there w i l l be w i t h regard to emmissions from b l e a c h p l a n t s . However, the f i r s t i n d u s t r i a l i n s t a l l a t i o n of i t s k i n d w i l l be made t h i s year i n Japan. ABSTRACT. Membrane filtration has been in o p e r a t i o n f o r more than five years on a commercial s c a l e in the pulp and paper inContinuous, m u l t i - s t a g e p l a t e and frame based systems are being used f o r purification, and molecular distribution c o n t r o l of l i g n o s u l f o n a t e from spent sulfite l i q u o r and preconc e n t r a t i o n of weak spent sulfite l i q u o r before evaporation. Larger s c a l e , long term pilot operations w i t h the s i m i l a r systems f o r s e p a r a t i o n of lignin from k r a f t b l a c k l i q u o r and c o l o r removal from bleach p l a n t e f f l u e n t s are going on successa d v i s i n g new and comprehensive a p p l i c a t i o n s f o r membrane filtration process in this i n d u s t r y . The aspect of saving fossile energy is a common f e a t u r e of most such operations as hyperfiltration i s typical low energy c o n c e n t r a t i o n method and the lignin products in many cases r e p l a c e petroleum based chemicals. Literature Cited 1.

2. 3.

4. 5. 6.

DDS Modules, U.S. Patent 3,872,015, GB patent 1,390,671, Italy patent 978,747, S w i t z e r l a n d patent 542,639, New Zealand patent 169,679. L. Janzen, P.H. Claussen, Norway patent 127,545, Swiss patent 560,289, P o r t u g a l , France, Brazil, Italy patents. K. F o r s s , A. Fuhrman, Karatex adhesive, F i n l a n d patent 167,647, U.S. patent 4,105,606. Patents GDR, A u s t r i a , GB, Hungary, e t c . J . Manson, EKA AB Sweden. Proceedings from I n t e r n a t i o n a l Pulp Bleaching Conference i n Toronto, June, 1979. P.H. Claussen, Pulp and Paper Canada, March, 1978. K. F o r s s , R. Kokkonen, H. Sirelius, P.E. Sagfors, Pulp and Paper Canada, December, 1979.

RECEIVED December 17,

1980.

In Synthetic Membranes: Volume II; Turbak, A.; ACS Symposium Series; American Chemical Society: Washington, DC, 1981.