Unimolecular Reaction of Methyl Isocyanide to Acetonitrile: A High

Apr 26, 2018 - The activation energy, reaction enthalpy, and fundamental vibrational frequencies calculated from first-principles agree well with expe...
0 downloads 3 Views 749KB Size
Subscriber access provided by UCL Library Services

Spectroscopy and Photochemistry; General Theory

Unimolecular Reaction of Methyl Isocyanide to Acetonitrile: A High-Level Theoretical Study Thanh Lam NGUYEN, James H. Thorpe, David H. Bross, Branko Ruscic, and John F. Stanton J. Phys. Chem. Lett., Just Accepted Manuscript • DOI: 10.1021/acs.jpclett.8b01259 • Publication Date (Web): 26 Apr 2018 Downloaded from http://pubs.acs.org on April 27, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

Unimolecular Reaction of Methyl Isocyanide to Acetonitrile: A High-Level Theoretical Study Thanh Lam Nguyen,1 James H. Thorpe,1 David H. Bross,2 Branko Ruscic,2,3 and John F. Stanton1,* 1

Quantum Theory Project, Department of Chemistry and Physics, University of Florida, Gainesville, FL 32611 (USA).

2

Chemical Sciences and Engineering Division, Argonne National Laboratory, Argonne, IL 60439 (USA). Computation Institute, The University of Chicago, Chicago, IL 60637 (USA)

3

*Corresponding author: [email protected]

1

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

A combination of high-level coupled-cluster calculations and two-dimensional master equation approaches based on semi-classical transition state theory is used to reinvestigate the classic prototype unimolecular isomerization of methyl isocyanide (CH3NC) to acetonitrile (CH3CN). The activation energy, reaction enthalpy, and fundamental vibrational frequencies calculated from first principles agree well with experimental results. In addition, the calculated thermal rate constants adequately reproduce those of experiment over a large range of temperature and pressure in the fall-off region, where experimental results are available, and are generally consistent with statistical chemical kinetics theory (such as Rice-RamspergerKassel-Marcus (RRKM) and transition state theory (TST)).

Table of contents (TOC) graphic:

2

ACS Paragon Plus Environment

Page 2 of 21

Page 3 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

The isomerization of methyl isocyanide (CH3NC) to acetonitrile (CH3CN) is a prototypical homogeneous unimolecular reaction1-7 that has long been studied with various experimental techniques.8-15 A half century ago, Rabinovitch and coworkers8-11 measured thermal rate constants over a wide range of temperatures and pressures in the fall-off region. These authors reported an activation energy of 160.7 kJ mol–1 at the high-pressure limit and an Arrhenius preexponential factor of 1013.5 s–1,8 results that were verified by subsequent experimental studies.12-15 In addition, on the basis of models and statistical Rice-Ramsperger-Kassel-Marcus (RRKM) theory,16-17 Rabinovitch and coworkers were able to satisfactorily reproduce the measured rate constants in the fall-off region (within a factor of 2).8 However, such kinetics calculations (using heuristic models for transition state structural and vibrational parameters) are ultimately not able to draw unambiguous conclusions about the nature or the kinetics. In the 1970s, the title reaction was theoretically investigated using both SCF/DZ+P18-19 and SDQMBPT(4)/DZ+P20 levels of theory. However, vibrational analyses were not used in those works to obtain the zero-point vibrational energies (ZPE) and rovibrational parameters, which are needed to calculate thermal reaction rate constants. In 1980, Schaefer and coworkers21 used SCF/DZ+P theory to obtain ab initio rovibrational parameters for stationary points and an activation energy of 183 kJ mol–1, the latter lying quite far above the experimental value of 160.7 kJ mol–1. Using these SCF rovibrational parameters and the experimental activation energy, Hase21 computed thermal rate constants at the high-pressure limit with transition state theory (TST). The theoretical results were about 50% higher than experiment.21 Recently, this reaction was reinvestigated with density functional theory (DFT).22-23 TST calculations were performed for thermal rate constants at the high-pressure limit (but, like Ref. 21, not in the fall-

3

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

off region). The rate constant calculated with DFT at 500 K was about 2.5 times smaller than the experimental value.23 Earlier, trajectory calculations done by Bunker and Hase24 using collisional energies of 293 to 837 kJ mol–1 showed non-RRKM unimolecular kinetics for CH3NC. This theoretical finding is potentially not relevant to thermal experiments8-15 since the collisional energies are so far above that at the reaction threshold. In this work, for the first time, thermal rate constants for the title reaction are computed from first principles for a wide range of temperatures (400–1000 K) and pressures (10–2–105 mmHg) in order to construct fall-off curves using state-of-the-art calculations. The potential energy surface was first constructed using the HEAT-345Q protocol,25-27 followed by solving a two-dimensional master equation to obtain k(T,P),28-30 where microcanonical rate constants, k(E,J), were computed using the SCTST/VPT2 approach.31-35 Table 1 shows heats of formation for CH3CN and CH3NC calculated with HEAT-345Q: 81.3 ± 1.0 kJ mol–1 at 0 K (74.2 ± 1.0 at 298.15 K) and 184.6 ± 1.0 (178.0 ± 1.0) kJ mol–1, respectively, which are in excellent agreement with the benchmark ATcT values36-39 of 81.10 ± 0.25 kJ mol–1 at 0 K (74.04 ± 0.25 at 298.15 K) and 183.52 ± 0.60 (176.97 ± 0.60) kJ mol–1. As discussed in more detail in the Supporting Information, variance decomposition analysis39 indicates that the provenance of the ATcT heat of formation of acetonitrile is predominantly experimental, involving combustion calorimetry on liquid acetonitrile and its vaporization enthalpy. The excellent agreement between the experimental route and the current state-ofthe-art computation is extremely gratifying and validates both the calculation and the experimental determination, particularly because analogous experimental routes can

4

ACS Paragon Plus Environment

Page 4 of 21

Page 5 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

occasionally (and somewhat unpredictably) lead to a spurious enthalpy of formation for the gas phase species (see Ref. 39 for a recent example involving hydrazine). The isomerization of CH3NC to CH3CN as displayed in Figure 1 proceeds through a 1,2 methylshift. This unimolecular reaction step is predicted to be exothermic by 103.3 kJ mol–1 at 0 K (103.8 kJ mol–1 at 298 K) and must overcome a barrier of 160.1 ± 1.0 kJ mol–1. The latter is in line with three (independent) experimental results: 160.7,8 159.8 ± 0.9,13 and 160.9 ± 1.5 kJ mol–1.15 As can be seen in Table 1, the SCF calculation overestimates the activation energy by 23 kJ mol–1 due to neglect of electron correlation. The CCSD(T)40-41 extrapolation gives the most important contribution: it recovers the lion’s share of the electron correlation and lowers the barrier by 14.9 kJ mol–1. The next most important contribution is the ZPE correction, which further decreases the barrier by 7.4 kJ mol–1. The remaining terms make smaller contributions (less than 1 kJ mol–1), but are nonetheless vital to achieve the desired accuracy. Next, we compare the theoretical fundamental vibrational frequencies of CH3CN and CH3NC (that were obtained using vibrational second-order perturbation theory42-43) with those of experiment (see Table 2).44 Here, harmonic force fields were calculated using a ANO245-46 quadruple-zeta basis set while a smaller ANO145-46 triple-zeta basis set was used to obtain the anharmonic force fields. For small molecules, our previous calculations47 using the same approach were able to accurately reproduce observed fundamental frequencies, typically within a few wavenumbers. The same level of accuracy is also obtained here for both CH3CN and CH3NC. It should be mentioned that there is a weak Fermi resonance in CH3NC between ν7 and 2ν5, which was treated by deperturbation and diagonalization to obtain the value in the table.48 Such accuracy is more than sufficient to be applied in a master equation simulation

5

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

where a typical energy grained bin size of 10 to 30 cm–1 is used (see below).28-30, 49-51 It should be mentioned that there is no experimental data for a TS, so comparison between theory and experiment cannot be made. Given the nature of the electronic structures of the minima and the TS, it is reasonable to expect that a similar level of accuracy is achieved for the latter. Furthermore, at the TS, there is a vibration with a rather low frequency of 195 cm–1, which corresponds to a hindered internal rotation of the methyl-group around an axis that is perpendicular to the CN bond during the methyl-migration from the N-atom to the C-atom. It is well established that VPT2 is strongly compromised by the presence of a large-amplitude motion (such as a hindered-internal rotation or an umbrella inversion). In this work, this low frequency vibration is assumed to be separable; it is projected out and treated as a separable one-dimensional hindered internal rotor. This assumption is only valid provided that couplings between this low frequency vibration and the remaining vibrations are weak, as is the case here. As shown in the Supporting Information, when the 1DHR treatment is included in the replacement of the low frequency vibration, the ZPE changes only negligibly (by 5 cm–1) and the calculated rate constants are also modified slightly (within 5%) under the conditions considered in this work. Therefore, VPT2 does not do that badly here, but the separable 1DHR approach is certainly to be preferred. With the potential energy surface, rovibrational parameters, and anharmonic constants at hand, we can now calculate thermal rate constants at the high-pressure limit from first principles (i.e. without any empirical or heuristic parameters) using Miller’s semiclassical transition state theory,33-35 Eq. 1:

6

ACS Paragon Plus Environment

Page 6 of 21

Page 7 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters





() = × 

 



 × ∑ '&(2 + 1) &  () exp(− ⁄#  ) % 

, ()* = ∑ '&(2 + 1) & - () exp(− ⁄#  ) %  +)

(1) (2)

Here h is Planck’s constant, kB is Boltzmann’s constant, T is the reaction temperature, E is the , internal energy relative to CH3NC, σ=3 is the reaction path degeneracy, and ()* are the  +)

rovibrational partition functions for CH3NC (the superscripts "re" and "≠" designate reactants and transition state, respectively). Note that the translational and electronic partition functions of CH3NC and TS cancel and are excluded. While total angular momentum J is a good quantum number and always conserved, its projection (the K quantum number) is not. Therefore, including quantum states of three external rotations into vibrations depends sensitively on how the K quantum number is treated. As recommended by Hase and co-workers,52-56 there are four possible models: K active rotor for TS / K active rotor for CH3NC; K adiabatic rotor / K adiabatic rotor; K active rotor / K adiabatic rotor; and finally, K adiabatic rotor / K active rotor. Any of these can be used to compute microcanonical rate coefficients for the CH3NC →TS → CH3CN step. As given in the Supporting Information, of these four models the K active model for both TS and CH3NC gives the best results as compared with experiment as well as with asymmetric top model. So, it is chosen for the basis of the discussion below.  According to the K active / K active,52 sums of ro-vibrational states for TS (G/0 ) and

densities of ro-vibrational states (ρ/0 ) for CH3NC are calculated as:

7

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 21



 (E, G/0 J) = 5 G0 (E − E6 − E/67 (J, K)) (3a)



ρ/0 (E, J) = 5 ρ0 (E − E/67 (J, K)) (3b)

B + (A − B)K D , with B = √B ∙ C and –J ≤ K ≤ +J with E/67 (J, K) = J(J + 1)B

(4)

Instead of counting exactly ro-vibrational states with Eq. (3), one can do a convolution of rotational states with vibrational states through Eq. (5) (see below). It is shown in the Supporting Information that Eq. (5) gives numerical results that are essentially equivalent to those from Eq. (3). The advantages of the use of Eq. (5) is to speed up the calculations of rovibrational states. It is well established that the convolution technique is much faster than the direct count.

 (E, G/0 J)

H?IJ

= 5 G0 (E − E6 − E/67 )ρ / (E/67 ) ∆E (5a) HKLM & H

ρ/0 (E, J) = 5 ρ0 (E − E/67 )ρ/ (E/67 ) ∆E (5b) HKLM &

A ceiling energy of 40000 cm–1 (relative to CH3NC) and a maximum total angular momentum (Jmax) of 200 are chosen to ensure that the numerical integration of Eq. 1 converges for all reaction temperatures considered in this work (up to 1000 K). An energy-grained bin as small as

8

ACS Paragon Plus Environment

Page 9 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

10 cm–1 and a step size of ∆J=5 for total angular momentum are used in computing the integral numerically. The same bin size of 10 cm–1 is also applied to calculate the anharmonic vibrational density and sum of states for CH3NC and TS, respectively, using the BDENS and SCTST codes of the MULTIWELL software package.57 Note that CH3NC is a symmetric top molecule, but the TS is not. However, to a reasonable approximation the TS can be treated as a near prolate symmetric top because it has A = 1.357, B = 0.528, and C = 0.411 cm–1. For such species, the rotational energy levels are given by Eq. 4.58 SCTST/VPT2 rate constants calculated at the high-pressure limit over a temperature range of 400 to 1000 K are documented in Table S1 (see the Supporting Information) and increase significantly with temperature, as expected for a reaction with a high barrier. At three particular temperatures of 472.6, 503.6, and 533 K, where high-pressure limit experimental data are available,8 our ab initio rate constants of 8.9×10–5, 1.1×10–3, and 9.7×10–3 s–1 agree well (within 20%), respectively, with values of 7.5×10–5, 9.25×10–4, and 7.67×10–3 s–1,8 which we believe to be the most accurate results yet obtained for this reaction. These purely theoretical results are thus consistent with RRKM theory at the high-pressure limit (which is equivalent to TST theory59-61) for this reaction. As can be seen, the ab initio rate constants (calculated using the ab initio barrier Eo = 160.1 ± 1 kJ mol–1) slightly overestimate experimental results. When the experimental activation energy8 of Eo = 160.7 kJ mol–1 (that lies within a plausible error range of the present calculations) is used, the agreement between theory and experiment is better, within 5%. So, Eo = 160.7 kJ mol–1 was chosen for use in the following master equation calculations.

9

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 21

We now turn to the task of computing thermal rate constants as functions of temperature and pressure in the fall-off region, and will then compare these theoretical results with Rabinovitch’s experiments.8 Two different approaches are used here to obtain solutions: one is to use a modification of the strong-collision energy transfer Lindemann model1, 6 through a collision efficiency factor, which is similar to that used earlier by Rabinovitch and coworkers; and the other is to solve a master equation with a weak-collision energy transfer model.49 Full details are given in the Supporting Information, but briefly summarized here. Modification of strong-collision (MSC) Lindemann model: the thermal rate constants in the falloff region are given by Eq. 6:1, 6, 62-63



(, P)QRS = ∑ '& &

T(I,')

=

U(V,W) XY ×Z[W

× \# (, )%

(6)

] _ (I,')

(, ) = ∙ ^

` (I,')

(7)

^

\# (, ) = kY

?lkY



h J

(D'= )`^ (I,')abc (?I/Te f) h h ∑Wji(D'= ) i `^ (I,')abc (?I/Te f)gI ?〈∆I〉

V pe (I,')gI

(8)

× \# (q , )

(9)

Where k(E,J) (in s–1) is the microcanonical rate constant for the CH3NC → CH3CN step, FB(E,J) is the Boltzmann thermal energy distribution function of CH3NC, ωLJ (in s–1) is the collision frequency, and βc is a collision efficiency between CH3NC and a bath gas, which can be estimated with Eq. 9.62-63 – (in cm–1) is the average amount of energy transferred per collision. Eo = 160.7 kJ mol–1 is the activation energy. C2H6 is chosen as the bath gas here

10

ACS Paragon Plus Environment

Page 11 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

because it was used in Rabinovitch’s early experiment.8 Collisional parameters adopted from the literature9-10, 57 are σ = 4.47 Å and ε/kB = 380 K for CH3NC and σ = 4.39 Å and ε/kB = 234 K for C2H6. With these parameters, a collision frequency of 1.16×1010 s–1 is obtained at T = 503.6 K and P = 1000 mmHg. To compute the integral in Eq. 6, one needs to know a collision efficiency, βc (or an average amount of energy transferred per collision, –, see Eq. 9). In previous studies, Rabinovitch and coworkers reported a collision efficiency βc = 0.6 for C2H6,8-10 from which we obtained – ≈ 1200 cm–1 using Eq. 9. This value is (accidentally) equivalent to that obtained by Miller and Chandler64 in an independent study. Using βc = 0.6, we computed k(T,P) and display the results in Figure 2, where experimental data are also included for comparison. As can be seen in Figure 2, the present theoretical results agree well with experiment at 503.6 K, but slightly underestimates the experimental rate constants (by about 20%) at the other two temperatures, 472.6 and 533 K. It is obvious that fitting will be better when βc becomes larger than 0.6. We found that βc = 0.71 (or – ≈ 2000 cm–1) gives a nearly perfect fit, as seen in Figure 3 below. It should be mentioned that the obtained collision efficiency of 0.71 is in very good agreement with 0.78 reported by Rabinovitch and coworkers in 1970.10 These results suggest that the thermally activated reaction system approaches the strong-collision limit, where βc becomes unity. It can be concluded that the MSC model can be applied to the title reaction. Two-dimensional master equation (TDME) approach: TDME that describes a time-evolution for the thermally activated isomerization of CH3NC to CH3CN (as shown in Figure 1) in competition

11

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 21

with the weak-collision energy transfer processes of CH3NC with the bath gas C2H6 is given by Eq. 10:49-51, 65-71

r)(Is ,'s ) rt

 P(u , u |T , T )wx' y(T , T )%T U &

= ∑ 'U & I

− wx' y(u , u ) − (u , u )y(u , u ) (10)

Where C is the population of CH3NC, and P(u , u |T , T ) is an energy/angular momentum transfer probability function from an initial state (Ek|Jk) to a final state (El|Jl). Solutions of Eq. 10 were previously reported elsewhere28-30 and are briefly given in the Supporting Information. Here, phenomenological rate constants, k(T,P)ME, in the fall-off region can be computed from the smallest eigenvalues (|λ1|) weighted by a Boltzmann distribution that runs over all possible total angular momentum quantum numbers through Eq. 11:

〈(, P)zI 〉 =

h

∑h Wji i |{| (')|pe (I,')gI

(11)

h

∑h Wji i pe (I,')gI

In this work, we assume a single exponential function that is frequently used for P(E)— energy transfer probability;49-50, 65-66, 68 and then we solve Eq. 9 for k(T,P)ME. To do this, one needs to find the (unknown) average amount of energy transferred per collision in a downward direction (i.e. deactivation path), down. To obtain a good fit, we varied down from 500 to 3000 cm–1 based on the initial value from the MSC model (see above). The calculated rate constants as functions of pressure are plotted in Figure S1. These clearly depend on the value of down. At very low pressure, P = 0.01 mmHg, k(T,P)ME increase by a factor of 2.5 as down

12

ACS Paragon Plus Environment

Page 13 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

is raised from 500 to 3000 cm–1 (Figure S1, Supporting Information). With higher pressures, the calculated rate constants become less sensitive to the average down energy transfer. We observe good agreement (within 10%) with experiment when down lies between 2000 to 3000 cm–1, with 2500 cm–1 yielding the best results. This value was used for subsequent calculations at other temperatures. It is worth nothing that while down = 2500 cm–1 seems rather large, it is equivalent to a collision efficiency of 0.75 in the MSC model: fully consistent with the value of 0.78 obtained by Rabinovitch and coworkers in 1970.10 On the other hand, such a large value associated with collisions involving a molecule with “soft” (torsional) vibrations potentially acts as a “fitting parameter” that makes some non-statistical behavior in the reaction. This latter possibility cannot be fully dismissed by the results of our work and appears to warrant further investigation. The calculated k(T,P)ME values are included in Figure 3 to compare with experiment and the MSC model. The excellent agreement (within 10%) between the two persists over an extensive range of temperatures and pressures in the fall-off region. It is obvious that the two theoretical models used here are able to entirely replicate Rabinovitch’s experimental results,8 which can be viewed as a triumph for modern computational chemical kinetics.

Supporting Information Optimized geometries of various stationary points, ro-vibrational parameters, one-dimensional hindered internal rotation, two-dimensional master equation approach, and the provenance analysis of the ATcT results are given. The supporting information is available free of charge on the ACS Publications website at DOI:

13

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Acknowledgements The work at University of Florida by TLN, JHT, and JFS was supported by the U. S. Department of Energy, Office of Basic Energy Sciences under Award DE-FG02-07ER15884 and the U. S. Air Force Office of Scientific Research (No. FA9550-16-1-0117). The work at Argonne National Laboratory was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences, under Contract No. DE-AC02-06CH11357, through the Gas-Phase Chemical Physics Program (BR) and the Computational Chemical Sciences Program (DHB). We thank an anonymous reviewer for comments that helped to shape the final form of this manuscript.

References 1. Robinson, P. J.; Holbrook, K. A., Unimolecular reactions. Wiley-Interscience: London, New York,, 1972; p xvii, 371 p. 2. Forst, W., Theory of unimolecular reactions. Academic Press: New York,, 1973; p xv, 445 p. 3. Holbrook, K. A.; Pilling, M. J.; Robertson, S. H.; Robinson, P. J., Unimolecular reactions. 2nd ed.; Wiley: Chichester ; New York, 1996; p xv, 417 p. 4. Forst, W., Unimolecular reactions : a concise introduction. Cambridge University Press: Cambridge, U.K. ; New York, 2003; p xi, 319 p. 5. Steinfeld, J. I.; Francisco, J. S.; Hase, W. L., Chemical Kinetics and Dynamics, 2nd, Prentice Hall International, Inc. 1999. 6. Eyring, H.; Lin, S. H.; Lin, S. M., Basic chemical kinetics. Wiley: New York, 1980; p vii, 493 p. 7. Gilbert, R. G.; Smith, S. C., Theory of unimolecular and recombination reactions. Blackwell Scientific Publications ; Publishers' Business Services distributor: Oxford ; Boston Brookline Village, Mass., 1990; p xii, 356 p. 8. Schneider, F. W.; Rabinovitch, B. S., Thermal Unimolecular Isomerization of Methyl Isocyanide - Fall-Off Behavior. J Am Chem Soc 1962, 84 (22), 4215-&. 9. Fletcher, F. J.; Rabinovitch, B. S.; Watkins, K. W.; Locker, D. J., Energy Transfer in Thermal Methyl Isocyanide Isomerization . Experimental Survey. J Phys Chem-Us 1966, 70 (9), 2823-+. 10. Chan, S. C.; Bryant, J. T.; Spicer, L. D.; Fujimoto, T.; Lin, Y. N.; Pavlou, S. P., Energy Transfer in Thermal Methyl Isocyanide Isomerization - a Comprehensive Investigation. J Phys Chem-Us 1970, 74 (17), 3160-+. 11. Wang, F. M.; Rabinovi.Bs, Fall-Off Behavior of a Thermal Unimolecular System in Presence of a Weak Collider Inert Bath Gas. J Phys Chem-Us 1974, 78 (9), 863-867. 12. Lifshitz, A.; Carroll, H. F.; Bauer, S. H., Studies with a Single-Pulse Shock Tube .2. Thermal Decomposition of Perfluorocyclobutane. J Chem Phys 1963, 39 (7), 1661-&. 13. Collister, J. L.; Pritchard, H. O., Thermal-Isomerization of Methyl Isocyanide in Temperature-Range 120320degreesc. Can J Chem 1976, 54 (15), 2380-2384. 14. Reddy, K. V.; Berry, M. J., Intracavity Cw Dye-Laser Photoactivation of Unimolecular Reactants Isomerization of State-Selected Methyl Isocyanide. Chem Phys Lett 1977, 52 (1), 111-116. 15. Wang, D. X.; Qian, X. M.; Peng, J., A novel method for the kinetic study of a chemical reaction. Determination of the kinetic parameters of the isomerisation reaction of methyl isocyanide using HeI photoelectron spectroscopy. Chem Phys Lett 1996, 258 (1-2), 149-154.

14

ACS Paragon Plus Environment

Page 14 of 21

Page 15 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

16. Marcus, R. A.; Rice, O. K., The Kinetics of the Recombination of Methyl Radicals and Iodine Atoms. J Phys Colloid Chem 1951, 55 (6), 894-908. 17. Marcus, R. A., Unimolecular Dissociations and Free Radical Recombination Reactions. J Chem Phys 1952, 20 (3), 359-364. 18. Liskow, D. H.; Schaefer, H. F.; Bender, C. F., Some Features of Ch3nc-]Ch3cn Potential Surface. J Chem Phys 1972, 57 (11), 4509-&. 19. Liskow, D. H.; Schaefer, H. F.; Bender, C. F., Theoretical Reaction Coordinate for Methyl Isocyanide Isomerization. J Am Chem Soc 1972, 94 (15), 5178-&. 20. Redmon, L. T.; Purvis, G. D.; Bartlett, R. J., Unimolecular Isomerization of Methyl Isocyanide to Methyl Cyanide (Acetonitrile). J Chem Phys 1978, 69 (12), 5386-5392. 21. Saxe, P.; Yamaguchi, Y.; Pulay, P.; Schaefer, H. F., Transition-State Vibrational Analysis for the Methyl Isocyanide Rearrangement, Ch3nc-]Ch3cn. J Am Chem Soc 1980, 102 (11), 3718-3723. 22. Jursic, B. S., Density functional theory and ab initio study of CH3NC and HNC isomerization. Chem Phys Lett 1996, 256 (1-2), 213-219. 23. Halpern, A. M., Computational studies of chemical reactions: The HNC-HCN and CH3NC-CH3CN isomerizations. J Chem Educ 2006, 83 (1), 69-76. 24. Bunker, D. L.; Hase, W. L., Non-Rrkm Unimolecular Kinetics - Molecules in General, and Ch3nc in Particular. J Chem Phys 1973, 59 (9), 4621-4632. 25. Tajti, A.; Szalay, P. G.; Csaszar, A. G.; Kallay, M.; Gauss, J.; Valeev, E. F.; Flowers, B. A.; Vazquez, J.; Stanton, J. F., HEAT: High accuracy extrapolated ab initio thermochemistry. J Chem Phys 2004, 121 (23), 11599-11613. 26. Bomble, Y. J.; Vazquez, J.; Kallay, M.; Michauk, C.; Szalay, P. G.; Csaszar, A. G.; Gauss, J.; Stanton, J. F., High-accuracy extrapolated ab initio thermochemistry. II. Minor improvements to the protocol and a vital simplification. J Chem Phys 2006, 125 (6). 27. Harding, M. E.; Vazquez, J.; Ruscic, B.; Wilson, A. K.; Gauss, J.; Stanton, J. F., High-accuracy extrapolated ab initio thermochemistry. III. Additional improvements and overview. J Chem Phys 2008, 128 (11). 28. Nguyen, T. L.; Stanton, J. F., A Steady-State Approximation to the Two-Dimensional Master Equation for Chemical Kinetics Calculations. J Phys Chem A 2015, 119 (28), 7627-7636. 29. Nguyen, T. L.; Lee, H.; Matthews, D. A.; McCarthy, M. C.; Stanton, J. F., Stabilization of the Simplest Criegee Intermediate from the Reaction between Ozone and Ethylene: A High-Level Quantum Chemical and Kinetic Analysis of Ozonolysis. J Phys Chem A 2015, 119 (22), 5524-5533. 30. Nguyen, T. L.; McCaslin, L.; McCarthy, M. C.; Stanton, J. F., Communication: Thermal unimolecular decomposition of syn-CH3CHOO: A kinetic study. J Chem Phys 2016, 145 (13), 131102. 31. Nguyen, T. L.; Stanton, J. F.; Barker, J. R., Ab Initio Reaction Rate Constants Computed Using Semiclassical Transition-State Theory: HO+H-2 -> H2O+H and Isotopologues. J Phys Chem A 2011, 115 (20), 5118-5126. 32. Nguyen, T. L.; Stanton, J. F.; Barker, J. R., A practical implementation of semi-classical transition state theory for polyatomics. Chem Phys Lett 2010, 499 (1-3), 9-15. 33. Miller, W. H., Semiclassical Theory for Non-Separable Systems - Construction of Good Action-Angle Variables for Reaction-Rate Constants. Faraday Discuss 1977, 62, 40-46. 34. Miller, W. H.; Hernandez, R.; Handy, N. C.; Jayatilaka, D.; Willetts, A., Abinitio Calculation of Anharmonic Constants for a Transition-State, with Application to Semiclassical Transition-State Tunneling Probabilities. Chem Phys Lett 1990, 172 (1), 62-68. 35. Hernandez, R.; Miller, W. H., Semiclassical Transition-State Theory - a New Perspective. Chem Phys Lett 1993, 214 (2), 129-136. 36. Ruscic, B.; Pinzon, R. E.; Morton, M. L.; von Laszewski, G.; Bittner, S. J.; Nijsure, S. G.; Amin, K. A.; Minkoff, M.; Wagner, A. F. Introduction to Active Thermochemical Tables: Several ″Key″ Enthalpies of Formation Revisited. J. Phys. Chem. A 2004, 108, 9979−9997; Ruscic, B.; Pinzon, R. E.; von Laszewski, G.; Kodeboyina, D.; Burcat, A.; Leahy, D.; Montoya, D.; Wagner, A. F., Active Thermochemical Tables: thermochemistry for the 21st century. J Phys Conf Ser 2005, 16, 561-570. 37. Ruscic, B.; Boggs, J. E.; Burcat, A.; Csaszar, A. G.; Demaison, J.; Janoschek, R.; Martin, J. M. L.; Morton, M. L.; Rossi, M. J.; Stanton, J. F.; Szalay, P. G.; Westmoreland, P. R.; Zabel, F.; Berces, T., IUPAC critical evaluation of thermochemical properties of selected radicals. Part I. J Phys Chem Ref Data 2005, 34 (2), 573-656. 38. Ruscic, B., Active Thermochemical Tables: Sequential Bond Dissociation Enthalpies of Methane, Ethane, and Methanol and the Related Thermochemistry. J Phys Chem A 2015, 119 (28), 7810-7837.

15

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

39. Ruscic, B.; Bross, D. H. Active Thermochemical Tables (ATcT) values based on ver. 1.122 of the Thermochemical Network (2016), available at ATcT.anl.gov.; Ruscic, B.; Feller, D.; Peterson, K. A. Active Thermochemical Tables: Dissociation Energies of Several Homonuclear First-Row Diatomics and Related Thermochemical Values. Theor. Chem. Acc. 2014, 133, 1415/1-12.; Feller, D.; Bross, D. H.; Ruscic, B. Enthalpy of Formation of N2H4 (Hydrazine) Revisited. J. Phys. Chem. A 2017, 121, 6187–6198. 40. Raghavachari, K.; Trucks, G. W.; Pople, J. A.; Headgordon, M., A 5th-Order Perturbation Comparison of Electron Correlation Theories. Chem Phys Lett 1989, 157 (6), 479-483. 41. Bartlett, R. J.; Watts, J. D.; Kucharski, S. A.; Noga, J., Noniterative 5th-Order Triple and Quadruple Excitation-Energy Corrections in Correlated Methods. Chem Phys Lett 1990, 165 (6), 513-522. 42. Mills, I. M., Vibration-Rotation Structure in Asymmetric- and Symmetric-Top Molecules. In Molecular Spectroscopy: Modern Research; Rao, K. N.; Mathews, C. W., Ed.; Academic Press: New York. 1972, Vol. 1, 115. 43. Hoy, A. R.; Mills, I. M.; Strey, G., Anharmonic Force Constant Calculations. Mol Phys 1972, 24 (6), 12651290. 44. Shimanouchi, T. Tables of Molecular Vibrational Frequencies. Consolidated Volume I, NSRDS-NBS 39, National Bureau of Standards: Washington, DC 1972. 45. Almlof, J.; Taylor, P. R., General Contraction of Gaussian-Basis Sets .2. Atomic Natural Orbitals and the Calculation of Atomic and Molecular-Properties. J Chem Phys 1990, 92 (1), 551-560. 46. Almlof, J.; Taylor, P. R., General Contraction of Gaussian-Basis Sets .1. Atomic Natural Orbitals for 1st-Row and 2nd-Row Atoms. J Chem Phys 1987, 86 (7), 4070-4077. 47. McCaslin, L. M.; Stanton, J. F., Calculation of Fundamental Frequencies for Small Polyatomic Molecules: A Comparison of Correlation-Consistent and Atomic Natural Orbital Basis Sets. Mol Phys 2013, 111, 1492-1496. 48. Matthews, D. A.; Stanton, J. F., Quantitative analysis of Fermi resonances by harmonic derivatives of perturbation theory corrections. Mol Phys 2009, 107 (3), 213-222. 49. Glowacki, D. R.; Liang, C. H.; Morley, C.; Pilling, M. J.; Robertson, S. H., MESMER: an open-source master equation solver for multi-energy well reactions. J Phys Chem A 2012, 116 (38), 9545-60. 50. Zhang, J.; Donahue, N. M., Constraining the mechanism and kinetics of OH + NO2 and HO2 + NO using the multiple-well master equation. J Phys Chem A 2006, 110 (21), 6898-911. 51. Barker, J. R., Multiple-well, multiple-path unimolecular reaction systems. I. MultiWell computer program suite. Int J Chem Kinet 2001, 33 (4), 232-245. 52. Zhu, L.; Chen, W.; Hase, W. L.; Kaiser, E. W., Comparison of Models for Treating Angular-Momentum in Rrkm Calculations with Vibrator Transition-States - Pressure and Temperature-Dependence of Cl+C2h2 Association. J Phys Chem-Us 1993, 97 (2), 311-322. 53. Zhu, L.; Hase, W. L., Comparison of Models for Calculating the Rrkm Unimolecular Rate Constant-K(E,J). Chem Phys Lett 1990, 175 (1-2), 117-124. 54. Song, K.; Hase, W. L., Role of state specificity in the temperature- and pressure-dependent unimolecular rate constants for HO2 -> H+O-2 dissociation. J Phys Chem A 1998, 102 (8), 1292-1296. 55. Hase, W. L., Some recent advances and remaining questions regarding unimolecular rate theory. Accounts Chem Res 1998, 31 (10), 659-665. 56. Song, K. H.; Sun, L. P.; Hase, W. L.; Grebenshchikov, S. Y.; Schinke, R., Relationship between mode specific and thermal unimolecular rate constants for HOCl -> OH+Cl dissociation. J Phys Chem A 2002, 106 (36), 8339-8344. 57. Barker, J. R.; Ortiz, N. F.; Preses, J. M.; Lohr, L. L.; Maranzana, A.; Stimac, P. J.; Nguyen, T. L.; Kumar, T. J. D.; Li, C. G. L. MultiWell-2016 Software. http://clasp-research.engin.umich.edu/multiwell/. 58. Baer, T.; Hase, W. L., Unimolecular reaction dynamics : theory and experiments. Oxford University Press: New York, 1996; p vi, 438 p. 59. Eyring, H., The activated complex in chemical reactions. J Chem Phys 1935, 3 (2), 107-115. 60. Evans, M. G.; Polanyi, M., Some applications of the transition state method to the calculation of reaction velocities, especially in solution. T Faraday Soc 1935, 31 (1), 0875-0893. 61. Truhlar, D. G.; Garrett, B. C.; Klippenstein, S. J., Current status of transition-state theory. J Phys Chem-Us 1996, 100 (31), 12771-12800. 62. Troe, J., Theory of Thermal Unimolecular Reactions at Low-Pressures .1. Solutions of Master Equation. J Chem Phys 1977, 66 (11), 4745-4757. 63. Troe, J., Theory of Thermal Unimolecular Reactions at Low-Pressures .2. Strong Collision Rate Constants Applications. J Chem Phys 1977, 66 (11), 4758-4775.

16

ACS Paragon Plus Environment

Page 16 of 21

Page 17 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

64. Miller, J. A.; Chandler, D. W., A Theoretical-Analysis of the Overtone-Induced Isomerization of Methyl Isocyanide. J Chem Phys 1986, 85 (8), 4502-4508. 65. Miller, J. A.; Klippenstein, S. J.; Raffy, C., Solution of Some One- and Two-Dimensional Master Equation Models for Thermal Dissociation: The Dissociation of Methane in the Low-Pressure Limit. J. Phys. Chem. 2002, 106, 4904-4913. 66. Miller, J. A.; Klippenstein, S. J., Master equation methods in gas phase chemical kinetics. J Phys Chem A 2006, 110 (36), 10528-44. 67. Jeffery, S. J.; Gates, K. E.; Smith, S. C., Full Iterative Solution of the Two-Dimensional Master Equation for Thermal Unimolecular Reactions. J. Phys. Chem. 1996, 100, 7090-7096. 68. Frankcombe, T. J.; Smith, S. C., Time evolution in the unimolecular master equation at low temperatures: full spectral solution with scalable iterative methods and high precision. Comp. Phys. Comm. 2001, 141 (1), 39-54. 69. Barker, J. R., Monte-Carlo Calculations on Unimolecular Reactions, Energy-Transfer, and IR-Multiphoton Decomposition. Chem Phys 1983, 77 (2), 301-318. 70. Vereecken, L.; Huyberechts, G.; Peeters, J., Stochastic simulation of chemically activated unimolecular reactions. J Chem Phys 1997, 106 (16), 6564-6573. 71. Vereecken, L.; Peeters, J., Detailed microvariational RRKM master equation analysis of the product distribution of the C2H2+CH(X-2 Pi) reaction over extended temperature and pressure ranges. J Phys Chem A 1999, 103 (28), 5523-5533.

Table 1: Individual contributions (kJ mol–1) of various terms to total atomization energy (TAE), heats of formation (∆fH°) for various species, and reaction barrier calculated using HEAT-345Q protocol. T er m δESCF δECCSD(T) δECCSDT δECCSDTQ δEScalar δEZPE δEDBOC δESpin-orbit T AE

CH 3 CN ( C 3 v , 1 A 1 ) 1 8 1 7 .4 1 7 6 2 .9 5 – 4 .3 7 3 .5 4 – 1 .7 9 – 1 1 7 .1 8 0 .3 4 – 0 .7 1 2 4 6 0 .1 9

∆fH° at 0 K ( 8 1 .1 0 ( 8 1 .1 1

∆fH° at 298 K ( 7 4 .0 4 ( 7 4 .0 4

8 1 .2 9 ± 0 .2 5 ) ± 0 .2 5 ) 7 4 .2 3 ± 0 .2 5 ) ± 0 .2 5 )

CH 3 N C ( C 3 v , 1 A 1 ) 1 7 3 5 .7 8 7 4 1 .7 4 – 3 .8 8 2 .7 5 – 1 .9 3 – 1 1 7 .1 1 0 .2 9 – 0 .7 1 2 3 5 6 .9 3

a) c) d)

( 1 8 3 .5 2 ( 1 8 3 .8 4

b) c) d)

( 1 7 6 .9 7 ( 1 7 7 .3 0

1 8 4 .5 5 ± 0 .6 0 ) ± 0 .4 9 ) 1 7 8 .0 1 ± 0 .6 0 ) ± 0 .4 9 )

TS 1 5 5 2 .5 3 7 5 6 .6 4 – 4 .1 9 3 .4 8 – 1 .3 9 – 1 0 9 .7 6 0 .2 1 – 0 .7 1 2 1 9 6 .8 1

Re act io n b ar r ier 1 8 3 .2 5 – 1 4 .9 0 0 .3 1 – 0 .7 3 – 0 .5 4 – 7 .3 5 0 .0 8 0 .0 0 1 6 0 .1 2

a) c) d)

b) c) d)

a) Hea ts o f fo r ma tio n ca lc ul at ed a t 0 K us i n g H ( 2 1 6 .0 3 4 kJ mo l – 1 ) , C( 3 P ) ( 7 1 1 .4 0 1 ± 0 .0 5 36-39 kJ mo l – 1 ) , a nd N ( 4 7 0 .5 7 7 ± 0 .0 2 4 kJ mo l – 1 ) , whi c h ar e t a ke n fr o m AT c T ( Re f s. ). b ) Hea ts o f fo r ma tio n ca lc ul at ed a t 2 9 8 K . 36-39 c) I nd ep e nd e n t AT cT r es u l ts ( T N ver . 1 .1 2 2 q ; se e t h e S up p o r t i n g I n fo r mat io n) d ) AT cT r e s ul ts a ft er i ncl u sio n o f t h e c ur r e nt c al c u lat io n s ( T N ver . 1 .1 2 2 q - b is)

17

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 21

Table 2: Calculated fundamental vibrational frequencies (cm–1) of CH3CN and CH3NC using CCSD(T)/ANO2/ANO1 level of theory. Experimental data are included for comparison. CH 3 CN Index ν1 ν2 ν3 ν4 ν5 ν6 ν7 ν8

Symmetry E A1 E A1 E A1 A1 E

Type of mode CCN bending CC stretching CH 3 rocking CH 3 s-deformation CH 3 d-deformation CN stretching CH 3 s-stretching CH 3 d-stretching

Theory a ) 365 916 1041 1382 1447 2268 2953 3006

Exptl. b ) 362 920 1041 1385 1448 2267 2954 3009

Diff. 3 –4 0 –3 –1 1 –1 –3

Theory 268 943 1131 1426 1463 2158 2972 3009

Exptl. 263 945 1129 1429 1467 2166 2966 3014

Diff. 5 –2 2 –3 –4 –8 6 –5

CH 3 NC Index ν1 ν2 ν3 ν4 ν5 ν6 ν7 ν8

Symmetry E A1 E A1 E A1 A1 E

Type of mode CNC bending CN stretching CH 3 rocking CH 3 s-deformation CH 3 d-deformation NC stretching CH 3 s-stretching CH 3 d-stretching

a) Har mo n ic a nd a n h ar mo n ic fo r ce f ie ld s wer e cal cu la ted u si n g ANO2 a n d ANO1 b as i s se ts , r e sp e cti v el y. b ) Fr o m S hi ma n o uc h i. 4 4

18

ACS Paragon Plus Environment

Page 19 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

Figure 1: Potential energy surface for the isomerization of CH3NC to CH3CN constructed using the HEAT-345Q method.

19

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 2: Thermal rate constants calculated at three different temperatures (199.4, 230.4 and 259.8 oC) in the fall-off region using a collision efficiency8 βc = 0.6 (or = –1200 cm–1). Experimental data8 (unfilled, red symbols) are included for comparison.

20

ACS Paragon Plus Environment

Page 20 of 21

Page 21 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

Figure 3: Thermal rate constants calculated as functions of temperature and pressure in the fall-off region for the unimolecular reaction of CH3NC to CH3CN: the MSC model uses a collision efficiency βc = 0.71; and the 2DME approach uses a downward energy transfer down = 2500 cm–1. Experimental data8 (unfilled, red symbols) are also included for comparison.

21

ACS Paragon Plus Environment