Upconversion Nanoprobes: Recent Advances in Sensing Applications

6 days ago - Rare earth ions doped upconversion nanoparticles (UCNPs) are capable of stepwisely converting two or more lower energy near-infrared ...
2 downloads 0 Views 2MB Size
Subscriber access provided by UNIVERSITY OF TOLEDO LIBRARIES

Review

Upconversion Nanoprobes: Recent Advances in Sensing Applications Zhiming Zhang, Swati Shikha, Jinliang Liu, Jing Zhang, Qingsong Mei, and Yong Zhang Anal. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.analchem.8b04049 • Publication Date (Web): 27 Sep 2018 Downloaded from http://pubs.acs.org on September 28, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

Upconversion Nanoprobes: Recent Advances in Sensing Applications Zhiming Zhang,1,# Swati Shikha,2,# Jinliang Liu,1 Jing Zhang,1,* Qingsong Mei,2,* and Yong Zhang2,*

1

School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road,

200444, Shanghai, China 2

Department of Biomedical Engineering, Faculty of Engineering, National University of

Singapore, Singapore 117583, Singapore # These authors contributed equally to this article

Corresponding

author:

[email protected]

(Jing

Zhang),

[email protected]

(Qingsong Mei), [email protected] (Yong Zhang)

1 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 63

1. Introduction Lanthanide ions doped upconversion nanoparticles (UCNPs) are capable of stepwisely converting lower energy near-infrared (NIR) excitation light into higher energy visible or ultraviolet emission with a large anti-Stokes shift.1-4 Because lanthanide ions have plenty of energy levels, UCNPs exhibit unique optical properties including optical tunability over emission wavelengths and lifetimes, better photo-stability and improved monochromatic color-purity and spatial resolution. However, the low luminescent efficiency, mainly attributing to the weak and narrow absorptions, has greatly hampered the translation of UCNPs-based technologies from experimental research to real world applications.5 Recently, increasing efforts have been paid on boosting the upconversion luminescence brightness and efficiency, including inert shells coating, high concentration of activators doping, organic dyes modification, and so on.6-7 Many strategies even aimed to explore high quality UCNPs with some more unique optical properties, such as orthogonal emissions or encoding luminescent signals, and broaden their applications.1 The marriage of UCNPs with sensing is one of the intriguing applications, which can greatly overcome some disadvantages faced by traditional optical labels, such as strong background interference of complex samples, photo damages to sensing targets, spectral overlap of multi-detection signals, and so on.8-11 To date, a number of UCNPs-based detection systems have been developed benefiting from the marriage.12-13 Most of these systems are based on the Förster resonance energy transfer (FRET) mechanism wherein the detection relies on the luminescence signals switch off/on or ratiometric luminescence variations.14 In the FRET process, UCNPs act as excellent energy donors. By taking advantages of versatile 2 ACS Paragon Plus Environment

Page 3 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

surface coating strategies, a collection of energy acceptors, such as organic dyes, metal nanoparticles, two-dimensional nanomaterials, and so on, have been decorated onto the surface for detection of various targets. These upconversion nanosensors have been further integrated with several detection platforms including test strips and microscopy imaging to contribute towards their practical applications.

Figure 1. Overview of UCNPs-based nanosensors from luminescence mechanism to sensing applications. In this review, we will focus on the recent two years literatures in the field of UCNPs-based sensing applications (Figure 1). First, recent progresses on the synthesis of specifically designed UCNPs and their surface modification strategies will be surveyed. Next, we will give a brief overview of general detection principles of the upconversion nanosensors, discuss the detection formats, and sum up various sensing applications including environmental hazard detection, food assays, biological analysis and medical diagnostics. Finally, we will outline future trends and challenges in the upconversion analysis field. We hope this review will offer a full-scale insight of upconversion nanosensors for readers to help 3 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 63

the further exploration of exceptional luminescent UCNPs and expand their application boundaries. 2. Properties of upconversion nanoparticles Despite the umpteen benefits, UCNPs are encountered with the poor luminescence efficiencies. Notably, the upconversion process in UCNPs is based on the absorption and emission-related radiative transitions with long radiative lifetimes (about hundreds of microseconds). Consequently, a large amount of excitation energy is dissipated via faster and nonradiative pathways that primarily includes surface quenching and phonon coupling.15 Recently, various strategies, including coating of inert shells, modifications of organic dyes to enhance the absorption of excitation lights, further annealing of the as-prepared UCNPs, and so on, have been developed to improve the upconverting efficiencies, which will be reviewed in detail hereinafter. The as-prepared UCNPs capped with hydrophobic molecules should be transferred to hydrophilic surface for the further conjugation to realize chemo/biosensing applications. Recent advances in the surface modifications of UCNPs are also summarized in this section. 2.1 Synthesis of UCNPs with specific luminescent properties

4 ACS Paragon Plus Environment

Page 5 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

Figure 2. (A) Schematic illustration of the surface-phonon-enhanced upconversion process. Adapted from Zhou, J. J.; Wen, S. H.; Liao, J. Y.; Clarke, C.; Tawfik, S. A.; Ren, W.; Mi, C.; Wang, F.; Jin, D. Y. Nat. Photon. 2018, 12, 154-158 (ref 22). Copyright 2018 Nature Publishing Group. (B) The energy transfer mechanism of dye-functionalized UCNPs. Adapted from Garfield, D. J.; Borys, N. J.; Hamed, S. M.; Torquato, N. A.; Tajon, C. A.; Tian, B.; Shevitski, B.; Barnard, E. S.; Suh, Y. D.; Aloni, S.; Neaton, J. B.; Chan, E. M.; Cohen, B. E.; Schuck, P. J. Nat. Photon. 2018, 12, 402-407 (ref 24). Copyright 2018 Nature Publishing Group. (C) Schematic illustration of the energy transfer pathway of NaErF4@NaYF4. Reproduced from Johnson, N. J.; He, S.; Diao, S.; Chan, E. M.; Dai, H.; Almutairi, A. J. Am. Chem. Soc. 2017, 139, 3275-3282 (ref 27). Copyright 2017 American Chemical Society. (D) The energy migration pathway of NaYF4: Yb/Tm UCNPs under 980 nm excitation (left), and excited with both 980 nm and 808 nm lasers (right). Adapted from Liu, Y.; Lu, Y.; Yang, X.; Zheng, X.; Wen, S.; Wang, F.; Vidal, X.; Zhao, J.; Liu, D.; Zhou, Z.; Ma, C.; Zhou, J.; Piper, J. A.; Xi, P.; Jin, D. Nature 2017, 543, 229-233 (ref 31). Copyright 2017 Nature Publishing Group. (E) Schematic showing the energy transfer pathway in the orthogonal emissive UCNPs. Adapted from Zheng, K.; Han, S.; Zeng, X.; Wu, Y.; Song, S.; Zhang, H.; Liu, X. Adv. Mater. 2018, e1801726 (ref 38). Copyright 2018 Wiley. 2.1.1 Upconversion luminescence efficiency 5 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 63

The luminescence efficiency of UCNPs is attenuated by a few deleterious energy migration processes, including non-radiative decay, cross-relaxation, energy back-transfer, and energy transfer to the high-energy vibrations of surface ligands. Many vibrational transitions of organic molecules are dipole-allowed, thus the coupling of a luminescent dopant in UCNPs to the surrounding solvent molecule can induce significant luminescence quenching even when the distance is more than the Förster critical distance (10 nm). It was reported that solvent quenching affected all energy levels of Er3+ ions involved in upconvertion luminescence.16 CH-stretch vibrations around 3000 cm-1 were found to matched with the transition energies of Er3+ ions in the process of 4S3/2 → 4F9/2 and 4F9/2 → 4I9/2, which induced the non-radiative decay of red and green emissions. To address these challenges, several efforts have been paid to improve the luminescence efficiency of UCNPs by changing the design of nanosturcture, dopant positions of lanthanide ions, and so on. In order to restore the surface defects (such as disorder, vacancy, and interstitial defects), Xu et al. prepared KLu2F7:Yb/Er bare core UCNPs and subjected them to a wet chemical annealing process. They used aberration-corrected high-angle annular dark field scanning transmission electron microscopy to compare surface state of the UCNPs with and without annealing.17 It was observed that the edge of the as-prepared UCNPs had an amorphous phase. Contrary to this, the further annealed UCNPs exhibited a well-defined edge. Additionally, the corresponding upconversion luminescence intensity of the annealed UCNPs was enhanced by an order of magnitude, thereby indicating the restoration of surface defects. As mentioned previously, energy transfer to surface via adjacent dopant ions dramatically decreased luminescence intensities. With regards to this, coating an inert shell of NaYF4 over the core 6 ACS Paragon Plus Environment

Page 7 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

UCNPs has been developed as an alternative strategy to enhance the UCNPs quantum yields. Homann

et

al.

systematically

studied

the

upconversion

quantum

yields

of

NaYF4:Yb/Er@NaYF4 nanoparticles with different shell thickness.18 They found that the maximum upconversion quantum yield was increased from 3.4% to approximately 9% when the size of the core-shell nanoparticles increased from 15 nm to 45 nm. Resch-Genger et al. also investigated the surface passivation effects and the possible intermixing influence between core and shell by coating NaYF4 shells with varying thicknesses onto the surface of ultrasmall hexagonal-phase NaGdF4:20%Yb/2%Er UCNPs.19 It was found that the optimum shell thickness was 5 nm, and varying the shell thickness resulted in tuning the lifetimes and quantum yields. To effectively minimize the deleterious interactions between the sensitizer lanthanide ion and the luminescent activators, Zhou et al. reported an interfacial energy transfer (IET)-mediated approach to facilitate upconversion from more lanthanide ions and with more excitation strategies.20 They systematically interrogated the photon upconversion performance from the traditionally studied lanthanide ions including Er3+, Tm3+, Ho3+, Tb3+ and Eu3+ through the IET strategy. The studies revealed that the separation of sensitizer-activator pairs (Yb-Er/Tm/Ho, Gd-Eu/Tb, and Nd-Yb) for efficient energy transfer was confined in a range less than 1.6-2.1 nm. Contrary to the common believe that the upconversion emission dynamics is dependent on the activator ions and their interactions with neighboring sensitizers, Zuo et al. demonstrated that excitation energy migration significantly affected the dynamics of upconversion luminescence. They designed NaYF4:20%Yb/2%Er @ NaYF4:20%Yb @ NaYF4:10%Nd/20%Yb nanostructures with ‘spatially separated dopant ions’ to distinguish 7 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 63

the basic steps of upconversion process (absorption of excitation energy, energy migration, and emission) that enabled them to investigate the temporal effect of energy migration.21 By using a binary pulsed (980 nm and 800 nm) excitation setup, it was observed that the strongest emission occurred when the 980 nm pulse was approximately 200 µs later the 800 nm pulse, while not illuminated at the same time. Moreover, the required time of the energy migration from Yb3+ to Er3+ can be well manipulated by the layer thickness, that changing from 0 to 4.5 nm would result in prolongation of 540 nm emission from 195 to 390 µs. Thermal quenching, which is commonly caused by the increased activity of phonons that leverages the non-radiative relaxation pathways, broadly limits luminescent efficiency of optical materials at higher temperature. Jin et al. recently reported that ‘heat-favorable phonons’ existing at the UCNPs’ surface (Figure 2A) were effective in circumventing the thermal quenching.22 It was found that the oxygen moiety of the surface molecules chelating with the exposed Yb3+ ions, [Yb···O], generated surface phonons. These phonons were observed to get further activated with an increased temperature. The study also illustrated that the [Yb···O] complexes upconverted the trapped phonon energy in a stepwise manner that subsequently led to a brighter emission from the UCNPs. Owing to this process, a 2,000-fold enhancement (approximately) in blue emission of 9.7 nm sized Yb3+-Tm3+ co-doped nanoparticles was observed when the temperature was increased from room temperature to 453 K. Along with solving the issue of temperature-based luminescence quenching, this strategy also opened up the possibility of exploring new pathways to develop brighter UCNPs. In a completely different approach, quenching process was rather employed as a tool to 8 ACS Paragon Plus Environment

Page 9 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

prepare UCNPs with single emission. Kim et al. reported a liquid-quenched amorphous matrix of NaYF4 created by completely melting the thin silica-coated NaYF4 nanocrystals under excitation with 980 nm continuous wave laser.23 After the liquid quenching process, it exhibited highly efficient single-band green upconverting emissions. This was attributed to the elevated transition probability of the host sensitive transition that facilitated ultrafast decay of emissions as short as 0.2 µs. This ultrafast transition effectively prevented the other states from populating by dominating the photon consumption process, thereby resulting in the single-band green emissions. 2.1.2 Dye-functionalized UCNPs Attaching organic dye antennas to UCNPs surfaces has been reported to dramatically increase their optical cross sections and absorption bandwidths, thereby resulting in a significantly enhanced upconversion luminescence. Schuck discovered that the NIR dye IR806 could play as an efficient antenna to harvest 808 nm excitations for leveraging the dye-UCNPs with a 33000-fold increase in brightness and a 100-fold increase in efficiency compared with bare UCNPs (Figure 2B).24 Upon excitation at 791 nm, the dye IR806 exhibited an emission centered at 981 nm that was close to the maximum absorption of Yb3+ transition

2

F7/2 → 2F5/2. The spin-triplet states in the dye IR806 played as important

intermediates in the energy migration, and the increase of effective nuclear charge of lanthanide ions on the surface of UCNP enhanced intersystem crossing (ISC) within the dye from singlet to triplet excited states. Thus, by increasing the amount of Gd3+ ions, the spin-orbit coupling and ISC kinetics within the dye were increased, leading to an additional enhancement in upconvertion luminescence. ATTO 542 is a commercially available dye 9 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 63

having significant spectral overlap with the green emission of Er3+, facilitating efficient energy transfer from Er3+ ions to ATTO 542. Wisser et al. decorated the surfaces of Na(Y/Gd/Lu)F4:Yb/Er(18/2%) UCNPs with ATTO 542, and demonstrated that the brightness of dyes decorated UCNPs increased two times and ten times than that of unmodified UCNPs in organic solution and water solution, respectively.25 It was pointed out that the brightness enhancement was attributed to the increased radiative rate after the dyes modification. 2.1.3 Heavy doping UCNPs Concentration quenching is a well-known phenomenon in UCNPs, which was commonly explained by the deleterious cross-relaxation between activators and/or sensitizers in close proximity, or enhanced energy transformation to the surface defects. Therefore, relatively low concentrations of sensitizers (around 20 mol %) and activators (lower than 2 mol %) are used in conventional UCNPs. Recent research demonstrated that a high-power density of excitation (ca. 106 Wcm-2) can effectively attenuate luminescence quenching in heavily doped UCNPs.26 Almutairi and co-workers found out that the main quenching at high dopant concentrations was predominantly attributed to energy migration to surface defects. In their work, it was found that the emission intensity decreased with increasing Er3+ concentration in NaYF4 UCNPs, and both the upconversion and downshifted luminescence intensities increased monotonically after coating a NaLuF4 shell with the thickness of 10 nm (Figure 2C).27 Furthermore, they developed an Er3+ heavily doped triple-layer core-shell-shell UCNPs, NaYb0.2/Er0.8F4@NaLuF4@NaGdF4, as triple-modal imaging contrast agents. For the NaYb/ErF4 core nanoparticles, heavily doping of Er3+ (80%) accelerated the excitation energy transformation to surface defects and quenched the luminescence. A NaLuF4 epitaxial shell 10 ACS Paragon Plus Environment

Page 11 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

growth onto its surface also sequestered the excitation energy in the core, thereby preventing surface quenching, and the emissions recovered immediately.28 Through combining the Tm3+-mediated transient energy trapping effects and inert-shell coating, Liu’s group also demonstrated that an appropriate doping of Tm3+ would further enhance the

luminescence

intensity

in Er3+-enriched core-shell NaErF4:Tm

(0.5

mol%)@NaYF4.29 After calculation based on density function theory, they found that Tm3+-doping led to a local realignment of 4f/5d orbitals of Er3+, which facilitated the transportation of excitation energies to Er3+ activator, thus leading to the enhanced upconversion luminescence. Almost at the same time, Zuo et al. reported that this heavily doped core-shell nanostructure, i.e. NaErF4@NaYF4 or NaErF4:0.5% Tm@NaYF4, exhibited high efficient monochromic red emissions under multi-band excitations (∼800 nm, ∼980 nm,

∼1530 nm).30 By investigations of the steady-state and time-resolved spectroscopic experiments, it was certified that the suppression of the concentration quenching effect was the result of “quenching site-free” environment of the activator. For Tm-doped system, high Tm3+ concentration (more than 1%) led to an intense cross-relaxation and luminescence quenching, as recently demonstrated by Jin and co-workers. The group found that the emission of UCNPs highly doped with 8% Tm3+ ions under continuous-wave (CW) 980 nm excitation was clearly inhibited once a CW 808 nm probe beam was applied at the same time, while low doping UCNPs showed negligible optical switching effects (Figure 2D).31 They believed that the reduced distance between Tm3+ ions generated a photon avalanche-like effect that quickly populated the 3H4 level of Tm3+ ions. In addition, the excitation energy of 808 nm matched well with the transition energy of 3H4→3H6, 11 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 63

which would induce the discharge of 3H4 intermediate level and inhibit the upconversion pathway for blue emissions. They utilized these novel properties to achieve low-power super-resolution stimulated emission depletion (STED) microscopy and improve optical resolution to 28 nm. He’s group also reported an efficient optical depletion in Tm3+ ions heavily doped NaYF4 UCNPs.32 They found out that when co-excitation with an 808 nm CW laser, the blue emission at 455 nm was significantly depleted with a efficiency up to 96%, and the emissions at 475 nm and 650 nm were quenched less significantly, while the emission at 700 nm was distinctly enhanced. However, in low Tm3+ doping (0.5%) NaYF4 UCNPs, the emission at 455 nm was strongly enhanced after co-irradiation with 808 nm laser. For the Nd3+ highly doped UCNPs, after anchoring an indocyanine green (ICG) dye on the surface of nanoparticles, the optimal doping amount of Nd3+ was shifted from 2 to 20 mol%, along with ∼10 folds increment in upconvertion brightness.33 The absorption cross section of ICG dye was about 30 000 folds higher than that of Nd3+ ions at 800 nm. The emission peak of ICG strongly matched with the absorption bands of Nd3+ ions, facilitating the energy transfer between ICG and Nd3+ ions. The enhanced harvesting of excitation light and efficient energy transformation among Nd3+ ions led to the brightness increase in the Nd3+-heavily doped UCNPs. 2.1.4 Orthogonal emission UCNPs Orthogonal emission is an excitation-dependent luminescence, in which the emission can be modulated between different lanthanide activators by changing the external excitation light. With the multi-compartment core/shell structure, UCNPs can activate different energy transfer pathways and generate versatile emission colors from the UV to visible range under varied 12 ACS Paragon Plus Environment

Page 13 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

excitations. Recently, many works have focused on the modulations of the different doping patterns in various layers of UCNPs to achieve the orthogonal emissions. Zhang’s group reported a new core/shell UCNPs, NaGdF4:Yb/Er@NaYF4:Yb@ NaGdF4:Yb/Nd@NaYF4@NaGdF4:Yb/Tm@NaYF4. By introducing a filtration layer (NaYF4) and tuning its thickness in the core-shell structured UCNPs, two unique independent emissions could be achieved, including UV/blue emissions from Tm3+ ions under illumination with 980 nm laser and green/red emissions from Er3+ at 796 nm excitation.34 Yan’s group also synthesized

a

new

orthogonal

emission

UCNPs

(NaGdF4:Yb/Er@NaYF4@NaYF4:Yb/Tm@NaYbF4:Nd@NaYF4) with Er3+ and Tm3+ doped in different regions, in which, the green emission from Er3+ ions and blue emission from Tm3+ ions were separately activated with 808 and 980 nm lasers.35 They found that by depositing a NaYF4 interlayer with the thickness of 1 nm, emissions of Er3+ could be significantly inhibited under 808 nm excitation, and the inhabitation efficiency was enhanced when increasing the thickness of NaYF4 interlayer. Moreover, with coating additional NaGdF4:Tb layer next to the NaGdF4:Yb,Tm layer, the green emission from Tb3+ was introduced and lifetime was prolonged from 0.13 ms (Er3+) to 3.6 ms (Tb3+), which enabled the multiplexed fingerprint and time-gated luminescence imaging in the manners of wavelength or lifetime. Romanowski et al. demonstrated that the UV emission from NaYF4: Yb/Tm UCNPs could be turned on and off by changing the excitation pulse width. It was found that a short pulse width of 10 µs produced NIR emission and nearly undetectable UV luminescence. On the other hand, a longer 2 ms pulse width produced comparable bright UV and NIR emission.36 Zuo et al. developed Nd3+-free UCNPs, NaErF4@NaYF4@NaYbF4:0.5%Tm@NaYF4, in which 13 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 63

UV-blue emissions from Tm3+ ions were switched on after excitation with 980 nm, which can be entirely switched off by 800 nm light, leaving the emission at only 660 nm.37 Very recently, Liu’s group demonstrated a power-independent orthogonal luminescence with ultrahigh spectral purity in multilayer UCNPs. For this, NaYF4:Er@NaYF4@NaYF4:Yb/Tm@NaYF4 multilayer nanoparticles were prepared and the thickness of NaYF4:Yb/Tm layer was tuned to achieve UV emission of Tm3+ under 980 nm excitation and green emission of Er3+ at 1532 nm excitation (Figure 2E).38 In addition, it was important to restrict the energy transfer from Yb3+ to Er3+ and excitation energy cross-relaxation between Er3+ and Tm3+ for the efficient orthogonal luminescence. This was done by incorporating an extra inert layer of NaYF4 shell between the core and NaYF4:Yb/Tm layer. As hypothesized by the group, the heavy Yb3+ doping in NaYF4:Yb/Tm shell led to a strong absorption of 980 nm photons by Yb3+, thereby restricting them from being absorbed by Er3+ present in the core region of the multilayer UCNPs. 2.2 Surface functionalization of UCNPs

14 ACS Paragon Plus Environment

Page 15 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

Figure 3. (A) Schematic showing the solvothermal treatment for the surface modification of UCNPs. Reproduced from Kong, W.; Sun, T.; Chen, B.; Chen, X.; Ai, F.; Zhu, X.; Li, M.; Zhang, W.; Zhu, G.; Wang, F. Inorg. Chem. 2017, 56, 872-877 (ref 39). Copyright 2017 American Chemical Society. (B) Schematic illustration for the aptamer modified UCNPs. Reproduced from Jo, E. J.; Byun, J. Y.; Mun, H.; Bang, D.; Son, J. H.; Lee, J. Y.; Lee, L. P.; Kim, M. G. Anal. Chem. 2018, 90, 716-722 (ref 41). Copyright 2018 American Chemical Society. (C) Schematic illustration of the synthetic procedure of peptide-functionalized UCNPs. Reproduced from Yao, C.; Wei, C.; Huang, Z.; Lu, Y.; El-Toni, A. M.; Ju, D.; Zhang, X.; Wang, W.; Zhang, F. ACS Appl. Mater. Interfaces 2016, 8, 6935-6943 (ref 43). Copyright 2016 American Chemical Society. (D) Preparation of cancer cell membrane-derived vesicles (CC) modified UCNPs (CC-UCNPs). Adapted from Rao, L.; Bu, L. L.; Cai, B.; Xu, J. H.; Li, A.; Zhang, W. F.; Sun, Z. J.; Guo, S. S.; Liu, W.; Wang, T. H.; Zhao, X. Z. Adv. Mater. 2016, 28, 3460-3466 (ref 44). Copyright 2016 Wiley. (E) Schematic illustration for the anisotropic ligand modification on the different facets of UCNPs. Reproduced from Ren, W.; Wen, S.; Tawfik, S. A.; Su, Q. P.; Lin, G.; Ju, L. A.; Ford, M. J.; Ghodke, H.; van Oijen, A. M.; Jin, D. Chem. Sci. 2018, 9, 4352-4358 (ref 47), with permission of The Royal Society of Chemistry. 15 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 63

The as-synthesized UCNPs are hydrophobic in nature attributed to the surface capping molecules such as oleic acid (OA), which is a pivotal challenge for their chemo/biosensing applications that require water-soluble nanoprobes. Therefore, it is important to explore efficient strategies to modify the UCNPs surfaces for hydrophilicity and subsequent conjugation to chemical or biological moieties in order to meet cater the needs of different applications. The most direct approach is getting rid of the hydrophobic OA molecules on the surface by treating them with a hydrochloric acid (HCl) solution, followed by the attachment of new ligands in a separate step. Wang’s group recently reported that solvothermal treatment of the HCl-treated UCNPs made the new ligands more firmly combined with UCNPs surface under high temperature and pressure (Figure 3A).39 Without the solvothermal treatment, most ligands cannot establish a strong bond with the nanoparticles that could be due to the electrostatic repulsion and steric hindrance. Many other strategies, including reaction with strong oxidants, coating with amphiphilic molecules or silica shell, have also been widely explored to improve the hydrophility of UCNPs. For example, by using host-guest interactions, Jin et al. used cucurbit[7]uril (CB[7]) to efficiently substitute the surfactant OA molecules to form CB[7]-coated UCNPs (CB-UCNPs).40 The seven ketone groups with high electronegativity in CB[7] made it easy to replace OA and convert UCNPs to be hydrophilic. Furthermore, the molecular architecture of CB[7] comprised of a hydrophobic host-environment, that enabled the modifications of biomolecules via host-guest inclusion. Amphiphilic interactions were another effective strategy to convert hydrophobic surface into hydrophilic and create new reactive sites for conjugations of various target molecules. Jo et al. explored polyethylene glycol polymer to 16 ACS Paragon Plus Environment

Page 17 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

modify UCNPs and further conjugate aptamers by using EDC/NHS coupling (Figure 3B).41 To generate long-term stability of functionalized UCNPs, Duong et al. systematically compared the adsorption capabilities of phosphate, carboxylic acid and sulphonic acid onto the UCNPs surfaces.42 It was found that the adsorption energies of carboxylic acid, sulphonic acid and phosphate groups were -77.9 kcal/mol, -80.0 kcal/mol and -90.4 kcal/mol, respectively. After ligand exchange with phosphate group, the UCNPs remained stable in water, PBS buffer and MES buffer for one week without any aggregations, whereas the UNCPs capped with carboxylic or sulphonic groups were only stable for the first few hours. Based on these features, Zhang’s group also reported that the specific phosphorylation of peptides dramatically enhanced the bonding strength without affecting the original target recognition performance of peptides (Figure 3C).43 Surface modification of UCNPs with cellular membranes offered them many natural cellular properties. Liu’s group demonstrated a general method to coat the cellular membrane onto UCNPs surfaces (Figure 3D).44 The encapsulation of Cancer cell (CC)-vesicles onto the surface of UCNPs was achieved by a physical extrusion of the mixture of CC-vesicles and UCNPs through a membrane. The obtained CC-UCNPs kept stable in many medium, enabling the feasibility of the subsequent experiments. The same group also reported that the red blood cell (RBC) membranes coated UCNPs (RBC-UCNPs) efficiently prevented the protein corona formation upon exposure to human plasma.45 After further modification of cancer-targeting molecules onto the cell membrane, the targeting efficiency of RBC-UCNPs were significantly improved. By use of the unique nature of RBC as an oxygen carrier in the blood, RBC-UCNPs could be used for photodynamic therapy of cancers and endowed with 17 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

stealth capability to escape from the reticuloendothelial system.46 As we know, UCNPs are hexagonal cylinders having two (001) planes at the ends and six (100)/(010) planes at lateral surfaces. Different charge distributions on these planes endow them with different ligands-binding abilities. With regards to this, Jin et al. investigated the differences in binding affinity of phosphate groups and phosphodiester bonds on DNA to the different facets of UCNPs. It was found that the phosphodiester bonds on DNA backbone had binding affinity stronger than OA on (001) planes, and weaker than oleate anions (OA-) on (100)/(010) facets. On the other hand, phosphate groups on DNA terminus were found to completely replace surfactant molecules on all the facets of UCNPs (Figure 3E), rendering the surface hydrophilic.47 Therefore, the anisotropic surface properties of UCNPs could be achieved by using phosphate or phosphodiester groups for functionalization. 3 Design of upconversion nanosensors UCNPs have been widely applied as the energy donors for designing the sensing applications due to their advantageous optical properties such as long fluorescence lifetimes, low photobleaching, and narrow emission peaks. Besides, the UCNPs are less disturbed by the background interference because of the low-energy NIR light excitation. The most used detection principles in UCNP-based nanosensors is resonance energy transfer, usually known as FRET. In addition, some other detection principles, such as inner filter effect (IFE) and electron transfer, have also been applied in UCNPs-based nanosensors. Furthermore, to achieve rapid, easy to operate, portable, and cost-effective assays, many platforms have been developed, including lateral flow strips, test paper, microarrays, microfluidic devices, and so on. In this section, we will focus on the recent advances in the detection principles and 18 ACS Paragon Plus Environment

Page 18 of 63

Page 19 of 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

formats. 3.1 Detection principles

Figure 4. (A) Typical schematic of the FRET process between UCNPs and energy acceptors in the absence or presence of analytes. (B) The interactions between the energy donor UCNPs and the acceptors. (C) FRET efficiency of organic dyes-UCNPs nanocomposites with different particle sizes. Reproduced from Muhr, V.; Wurth, C.; Kraft, M.; Buchner, M.; Baeumner, A. J.; Resch-Genger, U.; Hirsch, T. Anal. Chem. 2017, 89, 4868-4874 (ref 53). Copyrights 2017 American Chemical Society. (D) FRET modeling showing the luminescent centers to proximal molecular acceptors. (a) The luminescent ions were buried inside the nanoparticle. (b) Energy migration coupled FRET process enabling long distance energy transfer. Reproduced from Deng, R.; Wang, J.; Chen, R.; Huang, W.; Liu, X. J. Am. Chem. Soc. 2016, 138, 15972-15979 (ref 55). Copyrights 2016 American Chemical Society. Other than the luminescence donors (UCNPs), there remain three other prerequisites for 19 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 63

FRET: energy acceptors (luminescence quencher), recognition units for analytes, distance between the donors and acceptors. Generally, the energy acceptors should satisfy the spectral overlap between their absorption spectra and emission spectra of UCNPs, and the distance must be in close proximity (preferably