Upgrading Biodiesel from Vegetable Oils by ... - ACS Publications

Apr 4, 2018 - (entry 6). Though we found C−N-ligated complex 1 to be the best catalyst precursor for glycerol to lactate conversion11 and it perform...
3 downloads 9 Views 1MB Size
Subscriber access provided by UNIV OF DURHAM

Upgrading Biodiesel from Vegetable Oils by Hydrogen Transfer to its Fatty Esters Zhiyao Lu, Valeriy Cherepakhin, Talya Kapenstein, and Travis J. Williams ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.8b00653 • Publication Date (Web): 04 Apr 2018 Downloaded from http://pubs.acs.org on April 8, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Upgrading Biodiesel from Vegetable Oils by Hydrogen Transfer to its Fatty Esters Zhiyao Lu, Valeriy Cherepakhin, Talya Kapenstein, and Travis J. Williams* Donald P. and Katherine B. Loker Hydrocarbon Institute and Department of Chemistry, University of Southern California, 837 Bloom Walk, Los Angeles, California, 90089-1661, United States. * Corresponding author: Travis J. Williams, E-mail: [email protected] ABSTRACT: Conversion of vegetable-derived triglycerides to fatty acid methyl esters (FAMEs) is a popular approach to the generation of biodiesel fuels and the basis of a growing industry. Drawbacks of the strategy are that (a) the glycerol backbone of the triglyceride is discarded as waste, and (2) most available natural triglycerides in the U.S. are multi-unsaturated or fully saturated, giving inferior fuel performance and causing engine problems. Here we show that catalysis by iridium complex 1 can address both of these problems through selective reduction of triglycerides high in polyunsaturation. This is realized using hydrogen from methanol or those imbedded in the triglyceride backbone, concurrently generating lactate as a value-added C3 product. Additional methanol or glycerol as a hydrogen source enables reduction of corn and soybean oils to > 80% oleate. The cost of the iridium catalyst is mitigated by its recovery through aqueous extraction. The process can be further driven with a supporting iron-based catalyst for the complete saturation of all olefins. Preparative procedures are established for synthesis and separation of methyl esters of the hydrogenated fatty acids, enabling instant access to upgraded biofuels. KEYWORDS: Biodiesel, transfer hydrogenation, lactate, iridium

INTRODUCTION U.S. biodiesel production is proliferating at a brisk pace, with an average annual growth of 29% since 2009. 1 In contrast to fossil fuels, which emit significant net carbon, sulfur and aromatic pollutants, biodiesel that is produced from vegetable oils enables an environmentally-benign fuel cycle that involves carbon fixation.2,3,4,5 Key properties of the biodiesel depend almost entirely on its chemistry; 6 , 7 , 8 it is popular to convert vegetable oils (triglycerides) to low molecular weight fatty acid methyl esters (FAMEs), although cleavage of the linking glycerol moiety from the triglyceride leaves this fragment, ca. 10% of the mass of the feedstock, as waste.9,10,11 Still, these FAMEs are not ideal drop-ins for diesel fuel due to their polyunsaturation properties. In the U.S., over 80% of FAMEs (or equivalents) are produced from the two dominant vegetable feedstocks, soybean and corn oils.1 These oils are heavily unsaturated, with characteristic high content of linoleic acid (18:2) and linolenic acid (18:3). 12 This is problematic, because polyunsaturation lowers fuel stability, fuel energy density and lubricity, increases viscosity and gum formation, and causes slow ignition and high emission of hydrocarbons. 13 , 14 Corn and soybean will maintain a major role in US biodiesel, because they comprise more than half of the total acreage of farmed land in the US. 15 While heterogeneous hydrogenation is possible (e.g. Pd), 16 , 17 , 18 , 19 , 20 , 21 this involves cost and safety issues

associated with high pressure. Further, non-selective hydrogenations yield fully saturated FAMEs that have undesirable high melting points and high propensity to precipitate in diesel blends.22,23 While polyunsaturation or full saturation in fatty acids can cause long-term use issues, FAMEs that have high content of oleate (18:1) are an advantageous biodiesel. 22 High oleate FAMEs give useful stability and lowtemperature performance. Therefore, the purpose of this work is to provide a selective catalytic method that enables conversion of soybean and corn oils to high oleate biodiesel without glycerol waste. We propose that we can do this by transferring hydrogen selectively from triglyceride backbone and an external reductant to unsaturation in the lipids to produce high oleate biodiesel. This is conceptualized in scheme 1.

Scheme 1. General Scheme for Triglyceride Utilization Our lab has been involved in catalytic dehydrogenation for some time, 24, 25,26, 27, 28, 29,30 and we recently reported a catalytic, acceptorless dehydrogenation of glycerol. 31 Here

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

we show that we can realize the proposal in scheme 1, a tandem process which has an output of high oleate FAMEs and no glycerol waste stream. Because there is only one equivalent of H2 in the triglyceride’s backbone and six degrees of unsaturation in corn and soybean triglycerides, we will introduce an external reductant to realize full conversion of polyunsaturation. As exemplified in scheme 2, corn oil is converted to hydrogenated biodiesel and lactide in presence of an alcohol reductant, with perfect atom economy from the oil, good isolated yields of lactide and FAMEs, and high catalyst turnover number. We will also show that addition of a (Macho)Fe catalyst can enable full reduction of unsaturated triglycerides without loss of selectivity for conversion of the backbone to lactate. Thus, this work adds value to biodiesel production in two ways: 1) high oleate FAMEs can be produced from the abundant feedstocks, corn and soybean oils; 2) a large volume of waste glycerol is converted to a valuable fine chemical, lactate.32

Scheme 2. Iridium Catalysis Enables Vegetable Oil Conversion to FAMEs and Lactate RESULTS AND DISCUSSION We began by characterizing representative samples of natural corn and soybean oils. Other oils such as red palm and coconut oils also seem t o work under our conditions, but they have limited applicability due to their low unsaturation levels. We were able to measure natural oils’ fatty acid composition using 1H-NMR (Table 1). Table 1. Fatty Acid Composition of Natural Oilsa

In a first-pass experiment (Table 2, entry 1), both lactate (15%) and fatty acid hydrogenation were observed. The glyceride fragment of corn oil cannot provide enough reducing equivalents of hydrogen, and in about an hour the reaction mixture turns into a biphasic soapy mass and stops stirring. Only 5% of olefins were reduced. We addressed both problems with the addition of either methanol (entry 2) or glycerol (entry 3) to serve as both an external reductant and a solvent. Each works well, enabling complete hydrogenation and improved lactate yields. High conversion and selectivity are observed in the presence of methanol, which also enabled us to esterify crude fatty acid to yield FAMEs directly in an overall isolated yield of 65%. In reactions with glycerol as the reducing agent, a longer reaction time enables a higher yield of lactate: compare entries 3 and 4. These observations are not limited to corn oil; we observe comparable results for soybean oil (entry 5). Complex 1 also has good longevity under our catalytic conditions. Using only 30 ppm of 1 provides satisfying results, delivering over 230,000 turnovers in a single catalytic run (entry 6). While we found C—N-ligated complex 1 to be the best catalyst precursor for glycerol to lactate conversion 31 and it performed well in this tandem process, we examined several related iridium(I) precursors for comparative and control purposes. These are sketched in table 2. Complex 2 is a bulkier, CO-ligated version of 1 prepared in an analogous way. Complex 3 is a P—N homolog of 1 that works well in our hands in dehydrogenation of formic acid and alcohols. 24b 4 is Crabtree’s catalyst, presented here as an acyclic homolog of 3, and 5 is the iridium precursor from which our chelates are prepared. Table 2. Catalytic Hydrogenation of Polyunsaturation in Corn and Soybean Oilsa

Soybea n Corn a

Stearic (18:0)

11.9%

4.2%

22.6%

53.5%

6.1%

6.5%

1.4%

39.9%

50.1%

0.6%

Oleic (18:1)

Linoleic (18:2)

ONa [Ir]

Linoleni c (18:3)

Determined in triplicate by 1H-NMR.

To test our tandem reaction, neat corn oil and iridium complex 1 were combined in a sealed vessel with NaOH, and the solution was heated (Table 2). Hydrogen pressure evolved, and double bonds of the fatty acids were reduced. Only polyunsaturated fatty acids were reduced under our conditions. The selectivity is striking. In both corn and soybean oils, polyunsaturated acids can be completely hydrogenated to monounsaturated acids (e.g. oleic acid (18:1)). Simultaneously, oleic acid stays intact. The degree of hydrogenation reported in table 2 therefore describes the portion of polyunsaturated acids that are reduced. In our case, the product is FAMEs with 84-92% monounsaturation. The stability of monounsaturation through the reduction is significant, because it provides low-temperature fluidity and resistance to precipitation, which are problems with fully saturated fatty acids (e.g. 16:0 and 18:0).

O

OH O R O R

Palmiti c (16:0)

Page 2 of 6

O

O R

+

O

NaO

R=

OC

Ir

N N

OTf

OTf

Ir

Precataly st

PF6

N

N

Ir

N

3

Reductant (equiv.) Glycer MeOH ol 0 0

1

1

2

1

25

0

3c 4d 5e 6cf 7 8 9 10

1 1 1 1 2 3 4 5

0 0 25 25 25 25 25 25

25 25 0 0 0 0 0 0

Cl

PCy3

P tBu

N

Mes 2

1

Entr y

OC

or 3

3

OTf N

3

O

tBu

Ir

Ir

N

2

5

4

Degree of hydrogenati on 5% 100% (65%)g 99% 90% 98% 91% 82% 98% 71% 54%

Cl

Lactate yield (equiv.)b 0.15 1.00h 11.6 19.0 0.70 0.72 0.58 0.57 0.49 0.16

Reaction condition: 0.5 mL corn oil, 0.3 mol % Ir complex, 5 eq. NaOH, 120 °C, 1 day. Degree of hydrogenation refers only to linolenic acids and excludes oleic acid. b Determined by 1HNMR. c Reaction time was 3 days with 10 eq. NaOH. d Reaction a

ACS Paragon Plus Environment

OTf Ir

Fe

all fatty acids in corn oil (18:1), (18:2), (18:3)

N

O NaO

Ir

1

Entry

Ir precursor

Fe precursor

1b 2c 3 4 5

1 (6 mol%) NA 1 (0.3 mol%) 1 (0.3 mol%) 1 (0.3 mol%)

NA 6 (0.3 mol%) 6 (0.3 mol%) 6 (0.6 mol%) 6 (3.0 mol%)

N N

8

H

Br PiPr2 N Fe CO P Br iPr 2 6

full hydrogenation 95% 7% 21% 34% 90%

100

75

75

50

50

fatty acid hydrogenation lactate yield

25 0

0

10

20

30

40

25 0 50

100

24

80

18

60 12 40 6

20 0

fatty acid hydrogenation lactate yield 0

10

methanol (equiv.)

20

100

75

75

50

50

0

fatty acid hydrogenation lactate yield 0

5

10

NaOH (equiv.)

ACS Paragon Plus Environment

40

0 50

D

C 100

25

30

glycerol (equiv.)

15

25 0 20

100

6

80 4

60

fatty acid hydrogenation lactate yield

40

2

20 0

0

5

10

NaOH (equiv.)

15

0 20

lactate yield (eq.)

In varying the methanol loading, we observed near quantitative hydrogenation of fatty acid and near perfect glyceride to lactate conversion when 15 to 25 equivalents methanol are used (Figure 1A). In each case, formate appears as the side product. Further increasing methanol

B

A 100

lactate yield (%)

In order to gain insight of the catalysis, we have measured several key parameters of the reaction. First, we determined whether there is double bond migration coinciding with catalytic turnovers. Using structural NMR tools such as TOCSY and NOESY, we are confident that there is no migration, and the majority of the 1-degree unsaturated product is oleate (see Supporting Information for graphic spectra).

A base loading study showed no formation of lactate up to 2.5 equivalents of NaOH, even though > 90% hydrogenation of the fatty acids was observed (Figure 1C). This means that stoichiometric base is not required for olefin hydrogenation. This observation implies that a fast, base-independent transfer hydrogenation route from methanol to fatty acid is available. Such a transfer hydrogenation path can also explain the reactivity observed for iridium complexes 2, 3, 4, and 5 in which a relatively high degree of hydrogenation is observed with a relatively low level of lactate yield. However, under base-free conditions, more glycerol (20%) is derivatized than methanol ( 230k. g Isolated yield of FAMEs after esterification with methanol. h > 99% NMR conversion of glyceride to lactate.

lactate yield (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

fatty acid hydrogenation (%)

Page 3 of 6

ACS Sustainable Chemistry & Engineering

80

80

60

60

40

40

fatty acid hydrogenation

0

lactate yield 0

50

100

Water (equiv.)

150

20 0 200

fatty acid hydrogenation (%)

fatty acid hydrogenation (%)

100

20

rapidly in presence of base, to hydrogenate alkenes to give 8. When glycerol is dehydrogenated, 1,3-dihydroxyacetone is formed, then hydroxide is required for the transformations to finally yield lactate.

F

E 100

lactate yield (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 6

100 80 60 40 20 0

1

2

3

4

5

number of runs

Figure 1. Impact of methanol, glycerol, and NaOH concentration on the yield of reducing polyunsaturations. Conditions: 0.5 mL corn oil, 0.3 mol% Ir catalyst, 120 °C, 1 day. A. Variable methanol concentration, 5 eq. NaOH. B. Variable glycerol concentration, no MeOH, 1 eq. NaOH to glycerol (no less than 5 eq. to triglyceride). C. Variable NaOH loading, 15 eq. MeOH. D. Variable NaOH loading, 25 eq. glycerol. E. Variable H2O loading, 15 eq. MeOH, 5 eq. NaOH. F. 5 eq. NaOH, 15 eq. MeOH, 1 day.

More effort was paid to understand the phenomenon. We attempted direct hydrogenation under basic and base-free conditions. In a typical run, a reaction was set up in which a solution of corn oil, NaOH or no base, and 1 (0.3 mol%) was charged with 1.0 atmosphere of H2. After the reaction was stirred at 120 C for 1 day, a strong contrast, 62% or 18% of hydrogenation for basic or base-free conditions, was observed. This shows that H2 activation is effective with our catalyst and base, and can possibly account for the bulk of the reduction of fatty acids. Another possibility for the observed tandem dehydrogenation-hydrogenation is that it is a transfer-hydrogenation. To test this, we ran the reaction in a flask from which H2 gas was vented. Here we observe 25% hydrogenation of olefins. Thus, base-free transfer hydrogenation is also possible for our olefin reduction, although it is slower than the direct hydrogenation. In an extended utility study, the system shows useful water tolerance (Figure 1E). An even more critical extended utility issue, however, is the expense of iridium. Our homogeneous iridium catalyst is substantially soluble and thus can be recollected from aqueous-organic extraction and reused directly. We show our ability to extract the iridium catalyst from the reaction mixture and reuse it 4 times with only moderate loss of reactivity (Figure 1F). While there is reactivity loss that we are continuing to optimize, illustration of iridium recovery and reuse is an essential aspect of the merit of our system. Based on the evidence above and knowledge from previous studies, we propose the catalyst initiation steps shown in scheme 3. In this mechanism, 1 is initiated by reduction and loss of its cyclooctadiene ligand to give 8, which is observable by NMR, then 8 is deprotonated by base to an active species such as 8*. Although we can confirm the formation of 8* in aprotic solvents by its signature dark color, we are unable to observe 8* cleanly. We expect 8* to dehydrogenate alcohol (or activate dihydrogen), more

1 . U.S. Energy Information Administration. Monthly Biodiesel Production Report.

Scheme 3. Proposed mechanism for iridium catalyzed tandem dehydrogenation of glycerol and hydrogenation of fatty acids. CONCLUSION In conclusion, we present a high-utility process for the conversion of corn and soybean oils to value-added hydrogenated FAMEs and lactate. The key step is a tandem fatty acid hydrogenation and glyceride dehydrogenation that is enabled by a (carbene)iridium complex. The system has useful longevity and yield and is highly selective for the hydrogenation of polyunsaturated fatty acids. We further show that an iridium-iron catalysis cascade can almost completely hydrogenate the fatty acids. Ongoing work in our laboratory involves developing a detailed understanding of the initiation of hydrogenation pathways from 1, 2, and 3; these data are soon to follow.

ASSOCIATED CONTENT Supporting Information Details of reactivity screening studies, optimization studies, substrate scope studies. Data on NMR studies to probe mechanism. Graphical NMR spectra. This material is available free of charge via the Internet at http://pubs.acs.org.

AUTHOR INFORMATION Corresponding Author *E-mail TJW: [email protected]

Notes The authors declare no competing financial interests.

ACKNOWLEDGMENT This work is sponsored by the NSF (CHE-1566167), and the Hydrocarbon Research Foundation. We thank the NSF (DBI0821671, CHE-0840366, CHE-1048807) and the NIH (S10 RR25432) for analytical instrumentation.

REFERENCES

https://www.eia.gov/biofuels/biodiesel/production/ Feb 5, 2018)

ACS Paragon Plus Environment

(accessed

Page 5 of 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

2. Lee, D. H.; Lee, D. J. Biofuel Economy and Hydrogen Competition, Energy and Fuels 2008, 22, 177–181. 3. Oladosu, G. Estimates of the Global Indirect Energy-Use Emission Impacts of USA Biofuel Policy, Appl. Energy 2012, 99, 85–96. 4. Kant, P.; Wu, S. The Extraordinary Collapse of Jatropha as a Global Biofuel, Environ. Sci. Technol. 2011, 45 (17), 7114–7115. 5. Knothe, G.; Razon, L. F. Biodiesel Fuels, Progress in Energy and Combustion Science. 2017, 58, 36–59. 6. Wu, X.; Leung, D. Y. C. Optimization of Biodiesel Production from Camelina Oil Using Orthogonal Experiment, Appl. Energy 2011, 88 (11), 3615–3624; 7 . Gupta, J.; Agarwal, M.; Dalai, A. K. Optimization of Biodiesel Production from Mixture of Edible and Nonedible Vegetable Oils, Biocatal. Agric. Biotechnol. 2016, 8 (7), 112–120. 8 . Sahoo, P. K.; Das, L. M. Process Optimization for Biodiesel Production from Jatropha, Karanja and Polanga Oils, Fuel 2009, 88 (9), 1588–1594. 9. Sharninghausen, L. S.; Mercado, B. Q.; Crabtree, R. H.; Hazari, N. Selective Conversion of Glycerol to Lactic Acid with Iron Pincer Precatalysts, Chem. Commun. 2015, 51, 16201–16204. 10. Sharninghausen, L. S.; Campos, J.; Manas, M. G.; Crabtree, R. H. Efficient Selective and Atom Economic Catalytic Conversion of Glycerol to Lactic Acid, Nat. Commun. 2014, 5, 5084. 11. Pagliaro, M.; Ciriminna, R.; Kimura, H.; Rossi, M.; Della Pina, C. From Glycerol to Value-Added Products, Angew. Chem. Int. Ed. 2007, 46, 4434–4440. 12 . Pimentel, D.; Patzek, T. Ethanol production Using Corn, Switchgrass, and Wood; Biodiesel Production Using Soybean and Sunflower, Nat. Resour. Res. 2005, 14, 65–76. 13. Chuah, L. F.; Klemeš, J. J.; Yusup, S.; Bokhari, A.; Akbar, M. M. Influence of Fatty Acids in Waste Cooking Oil for Cleaner Biodiesel, Clean Technol. Environ. Policy 2017, 19, 859–868. 14. Mahmudul, H. M.; Hagos, F. Y.; Mamat, R.; Adam, A. A.; Ishak, W. F. W.; Alenezi, R. Production, Characterization and Performance of Biodiesel as an Alternative Fuel in Diesel Engines–A Review, Renew. Sustain. Energy Rev. 2017, 72, 497–509. 15. Farmdoc Daily. Switches in Corn, Soybeans, and Wheat Acres in the U.S. and Illinois. http://farmdocdaily.illinois.edu/2017/12/switches-in-cornsoybeans-and-wheat-acres.html (accessed Feb 5, 2018) 16. Thunyaratchatanon, C.; Luengnaruemitchai, A.; Chollacoop, N.; Yoshimura, Y. Catalytic Upgrading of Soybean Oil Methyl Esters by Partial Hydrogenation Using Pd Catalysts, Fuel 2016, 163, 8–16. 17. Zaccheria, F.; Psaro, R.; Ravasio, N. Selective Hydrogenation of Alternative Oils: a Useful Tool for the Production of Biofuels, Green Chem. 2009, 11, 462. 18. Su, M.; Yang, R.; Li, M. Biodiesel Production from Hempseed Oil Using Alkaline Earth Metal Oxides Supporting Copper Oxide as Bifunctional Catalysts for Transesterification and Selective Hydrogenation, Fuel 2013, 103, 398–407. 19. Yang, R.; Su, M.; Li, M.; Zhang, J.; Hao, X.; Zhang, H. One-pot Process Combining Transesterification and Selective Hydrogenation for Biodiesel Production from Starting Material of High Degree of Unsaturation, Bioresour. Technol. 2010, 101, 5903– 5909. 20. Papadopoulos, C. E.; Lazaridou, A.; Koutsoumba, A.; Kokkinos, N.; Christoforidis, A.; Nikolaou, N. One-Pot Process Combining Transesterification and Selective Hydrogenation for Biodiesel Production from Starting Material of High Degree of Unsaturation, Bioresour. Technol. 2010, 101, 1812–1819.

21. Souza, B. S.; Pinho, D. M. M.; Leopoldino, E. C.; Suarez, P. A. Z.; Nome, F. Selective Partial Biodiesel Hydrogenation Using Highly Active Supported Palladium Nanoparticles in Imidazolium-Based Ionic Liquid, Appl. Catal. A Gen. 2012, 433–434, 109–114. 22. Demirbas, A. Biofuels Sources, Biofuel Policy, Biofuel Economy and Global Biofuel Projections, Energy Convers. Manag. 2008, 49 (8), 2106–2116. 23. Chupka, G. M.; Fouts, L.; Lennon, J. A.; Alleman, T. L.; Daniels, D. A.; McCormick, R. L. Saturated Monoglyceride Effects on LowTemperature Performance of Biodiesel Blends, Fuel Process. Technol. 2014, 118, 302–309. 24 . Zhang, X.; Kam, L.; Trerise, R.; Williams, T. J. RutheniumCatalyzed Ammonia Borane Dehydrogenation: Mechanism and Utility, Acc. Chem. Res. 2017, 86-95. 25 Celaje, J. J. A.; Lu, Z.; Kedzie, E. A.; Terrile, N. J.; Lo, J. N.; Williams, T. J. A Prolific Catalyst for Dehydrogenation of Neat Formic Acid, Nat. Commun. 2016, 7, 11308. 26. Lu, Z.; Conley, B. L.; Williams, T. J. A Three-Stage Mechanistic Model for Ammonia–Borane Dehydrogenation by Shvo's Catalyst, Organometallics 2012, 31, 6705-6714. 27. Lu, Z.; Williams, T. J. A Dual Site Catalyst for Mild, Selective Nitrile Reduction, Chem. Commun. 2014, 50, 5391-5393. 28 . Lu, Z.; Malinoski, B.; Flores, A. V.; Conley, B. L.; Guess, D.; Williams, T. J. Alcohol Dehydrogenation with a Dual Site Ruthenium, Boron Catalyst Occurs at Ruthenium, Catalysts 2012, 2, 412-421. 29. Zhang, X.; Lu, Z.; Foellmer, L. K.; Williams, T. J. Nitrogen-Based Ligands Accelerate Ammonia Borane Dehydrogenation with the Shvo Catalyst, Organometallics, 2015, 34, 3732-3738. 30. Lu, Z.; Williams, T. J. Di(carbene)-Supported Nickel Systems for CO2 Reduction Under Ambient Conditions, ACS Catal. 2016, 6, 6670-6673. 31. Lu, Z.; Demianets, I.; Hamze, R.; Terrile, N. J.; Williams, T. J. A Prolific Catalyst for Selective Conversion of Neat Glycerol to Lactic Acid, ACS Catal. 2016, 6, 2014–2017. 32. Anastas, P. T.; Zimmerman, J. B. Innovations in Green Chemistry and Green Engeering, Springer-Verlag New York, 2013. 33. Farnetti, E.; Kašpar, J.; Crotti, C. A Novel Glycerol Valorization Route: Chemoselective Dehydrogenation Catalyzed by Iridium Derivatives. Green Chem. 2009, 11, 704-709. 34. Azua, A.; Mata, J. A.; Peris, E.; Lamaty, F.; Martinez, J.; Colacino, E. Alternative Energy Input for Transfer Hydrogenation Using Iridium NHC Based Catalysts in Glycerol as Hydrogen Donor and Solvent, Organometallics 2012, 31, 3911–3919. 35. Azua, A.; Mata, J. A.; Peris, E. Iridium NHC Based Catalysts for Transfer Hydrogenation Processes Using Glycerol as Solvent and Hydrogen Donor, Organometallics 2011, 30, 5532–5536. 36. Mazloomi, Z.; Pretorius, R.; Pàmies, O.; Albrecht, M.; Diéguez, M. Triazolylidene Iridium Complexes for Highly Efficient and Versatile Transfer Hydrogenation of C═O, C═N, and C═C Bonds and for Acceptorless Alcohol Oxidation, Inorg. Chem. 2017, 56, 11282– 11298. 37. Azua, A.; Finn, M.; Yi, H.; Beatriz Dantas, A.; Voutchkova-Kostal, A. Transfer Hydrogenation from Glycerol: Activity and Recyclability of Iridium and Ruthenium Sulfonate-Functionalized N-Heterocyclic Carbene Catalysts, ACS Sustain. Chem. Eng. 2017, 5, 3963–3972.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 6

For Table of Contents Use Only

TOC: The one-pot catalytic process converts biodiesel waste glycerol to lactate while hydrogenating polyunsaturation in the fatty acids.

ACS Paragon Plus Environment