Use of Condensation Figures To Image Low ... - ACS Publications

Low-Energy Ion Beam Damage of Monolayer Films. [Erratum to document cited in CA121:239123]. Thomas E. Kane, Vincent J. Angelico, and Vicki H. Wyso...
0 downloads 0 Views 451KB Size
Correction Anal. Chem. 1994, 66,4564

Use of Condensation Figures To Image Low-Energy Ion Beam Damage of Monolayer Films Thomas E. Kane, Vincent J. Angelico, and Vicki H. Wysocki* (Anal. Chem. 1994, 66,3733-3736).

Monolayer films are bombarded by low-enem (10100 ev) ion beams, and condensation figures (CFs), or breath figures, are used to image the damage. 'Ihe monolayer films are prepared on gold using long-chain where R is the polar o t e r alkanethiols (R(CHZ)~SH), minal group, OH (n = 11)or [N(CH&+Br-] (n = 20). After bombardment, the films are removed from vacuum, and clean water vapor is allowed to condense onto the monolayer films, forming droplet patterns. Differences in water droplet sue, shape, and population density per unit area are observed between the damaged and undamaged monolayer regions, due to differences in surface polarity between the undamaged polar thiolates and those that have lost the wterminal group via ion-surface collisions. The final droplet pattern illustrates the dimensions and shape of the lowenergy ion beam. The ion beam damage site observed is a well-defined, cross-shape 8 mm x 6 mm, which is smaller than the dimensions of the surface. In order to improve the focusing of the ion beam, a leaky dielectric ELFS tube lens is added to the lens assembly prior to the surface, at the entrance of the first quadrupole (a second quadrupole is positioned after the surface to collect and analyze the scattered ion flux). With the ELFS lens in place, the resulting cross shape is thinner, and the horizontal portion of the cross is greatly diminished, as expected. Magnification of the damaged apolar spot region in both cases yields spherical water droplets, smaller in diameter than those observed for the undamaged polar regions.

s

Figure 2. CF images. (a, top) AuS(CH2)lrOH monolayer film after damage by a 70 eV A r + beam for 4 h. (b, middle) Closeup of an edge of the damage region above, illustrating the different droplet pattems. (c, bottom) [AuS(CH2)~N(CH3)3+Br-] monolayer after being damaged for 4 h by a 70 eV A r + beam with a leaky dielectric lens positioned at the entrance to Q1. 4564 Analytical Chemistry, Vol. 66, No. 24, December 75, 7994

0003-2700/94/0366-4564$04.50/0 0 1994 American Chemical Society